After upgrade the iOS 10, phone thinks it is in mode

Similar Questions

• After upgrade the iOS 10, HotSpot does not work

  Can't wait to post that iOS 10 update, I could not access the personal hotspot option.

  I was previously using iOS 9.3.5 and hotspot worked as usual, appearing as an option under cellular. I had used it to connect my other phones to the internet and the laptop, because I need it to work.

  I did the update iOS through iTunes 10.0.1 without trying the OTA. Now, I get this:

  

  I already reset my network settings. Twice. The option appears just after the reset and is absent. I am looking a 9.3.5 downgrade until the issue is resolved.

  Many people seem to have this problem, through a variety of Telco. In Aus, the problem occurred on Virgin Mobile, with workaround seems to be; switch down from 4G to 3G.

• After upgrading to IOS 9.1 my iPad2 crashes constantly and Safari takes more than 30 seconds for the loading of the page.  When Apple will solve these problems, given that the downgrade isn't possible?

  After that the IOS upgraded to 9.1 on my iPad 2, the unit has switched navigation performance and each app is lagging, and then crashes the device, to be hard restarts.  Changing such settings recommended in many articles does not improve these problems of performance or speed.  Given that the downgrade is possible, when Apple will release 9.2 to solve all these problems of performance?

  These are performance problems widespread in the complaints I've seen on many articles, even in this community and discussion forums.

  Uh, no.

  iPad 2 questions are far from "widespread".

  Each user who has problems with their brand of Apple devices claimed that their problems are widespread disaster.

  users of iPad 2, 3 and 4, like me, don't post troubleshooting forums if their iOS/updates updates update succeeded.

  Here are my updated list of corrections suggested for a model slow iPad 2, 3 or 4.

  Try to reset all the settings in the settings under general app and in the right column under restore.

  Try stories reset and delete/reset the caches in all web browsers you use.
  If you use Safari, these features may be in the application settings under Safari.
  Other browsers have their settings inside the running application itself.

  If your iPad has been activated for iCloud, in the application settings under iCloud, to the right, under iCloud Drive, type in iCloud drive and make sure that Safari is off to save data from Safari to iCloud by car.

  Also, under iCloud in the application settings, in iCloud Drive, turn the feature off saving for all other desired apps DO NOT the data automatically on iCloud drive.

  If you are using Safari is always causing issues.
  Try changing / using web browser third another, different.
  I do not use iOS Safari too much more because I found it cause me headaches on some Web sites, regularly, to visit.
  I commonly use another third party browser, perfect browser (there are others that can suit your style better web browsing, so look all first to see what third-party browser may work better for you) and I have never experience many questions that Safari was originally.

  In the application settings tab general, right under the spotlight sesrch, try disable the search under the applications who really don't need a research, as some games, remote controls, apps that are really useless to be searched, etc., in order to reduce the list to Spotlight search.

  Try to turn the reduced movement.
  This is found in the application of settings in the general tab, in the left panel.
  In the right panel, look under accessibility, look to reduce the Motion and turn this feature "On".
  You should see a significant performance increase on all models of iPad 2, 3 and 4.

  In the application settings under the general tab, in the right column, search background App update and enable this setting to "off".

  Try a reset of your iPad by simultaneously pressing buttons Home and sleep/wake button until your iPad goes to the dark and restarts with the Apple logo, then release the buttons.

• Problem of LTE connectivity after upgrade to iOS 10-SE

  Do not know if everyone knows this, but after upgrade to iOS 10 on my iPhone SE when I leave one area LTE and go to the services area or area No. less than LTE and re - enter a LTE area, I have no service. There is no service or reports 4g, but when I use an app, it says no network not connected. I tried all the usual stuff... Restored from backup, cleared cache, reset the network connections, did a hard reset, nothing works. The only thing that comes to LTE turns the phone then turn it back. All this experience? I have never had this issue before moving to iOS 10.

  I think you have the same problem described here:

  After briefly losing service, iPhone will fail to connect to the cellular network until you restart

• Cannot open the safari link after installing the iOS 9.3

  Cannot open the safari link after installing the iOS 9.3

  This is a common problem and there is currently no permanent solution yet.

  Try turning off JavaScript under settings - Safari - Advanced.

  I think that apple will figure things out soon.

• I can't activate my iPad after upgrade to iOS 9.3

  I can't activate my iPad after upgrade to iOS 9.3.  It seems that others have the same problem. Has anyone heard when a fix will be available?

  Yep, having the same problem. also, iTunes is not recognizing the device is

• After upgrading to iOS 9.3, my iPad Air wifi clothing

  Hello everyone

  After upgrading to iOS 9.3, my grey hot appliance and wifi ipad. I restore to downgrade, reset all settings, reset the network, but will not fix this problem. Can someone help me?

  First of all, after that gray WiFi update and address Wi - Fi still show the number of the address

  

  Second, because the hot appliance, I restart and wi - fi, gone forever. And Wi - Fi address showing N/A

  

• could not activate iPad2 after upgrade to iOS 9.3

  could not activate iPad2 after upgrade to iOS 9.3

  What error do you get?

• Satellite L650d-120 does not load after upgrading the BIOS 1.7

  After upgrading the Bios up to 1.70 my laptop is no charging current, but always works to the AC adapter.
  Can I do something on my own?

  Hello

  First of all, you should set the BIOS to default settings and need to save the changes.
  You must also leave the AC adapter plugged into the laptop for a longer period of time.

  Welcome them

• My touch screen has a problem after downloading the IOS 9.0.2. Already try apple advises the steps. But the problem still occur. Already done restart of strength. Factory setting Reset also possible. But still the same problem. Can only be used at one min

  Hello!!!

  IM Apple Fan.

  Purchased IM Ipad2, Ipad4, Iphone6

  Last month I already buy s Iphone6 +.

  Today I feel unhappy

  MY IPHONE 6 'history '.

  My touch screen has a problem after downloading the IOS 9.0.2.

  Already called and try apple advises the steps. But the problem still occur.

  Already done restart of strength. Factory setting Reset also possible. But still the same problem.

  Only can be used for a minute. After that... The problem comes in again & again & again...

  APPLE.COM

  Can U help me

  Only products of Apple of love before updating the version 9.0.2

  iOS 9.0.2 happened some time. The last iOS is iOS 9.2. If you have not updated, updated. If you restored to the factory, it must have downloaded iOS 9.2. Also, if you restore to the factory and the problem is still there, then you must make an appointment at the Genius Bar to the nearest Apple store or Apple authorized service provider or call the Apple Support to have the device examined by Apple. There seems to be something wrong with the screen.

• After upgrading the bios to version 2.13 t430u, it freezes at black screen

  Hi all

  After upgrading my lenovo T430u bios to version 2.13 it freezes at a black screen, and windows does not load. My machine has windows 7 Professional and the only way to make it work is to reset the bios settings, but after awhile, it freezes at black screen and windows 7 does not load again and need to reset the settings of the bios once more. Hope someone of you gyus can help me with this since is very frustrating.

  Lenovo has released a BIOS updated for ThinkPad T430u that resolves customer reports of black screen after upgrading the BIOS.

  CHANGES IN THIS VERSION

  Version 2.15

  [Problem resolves]

  -Fixed a problem with the black screen after BIOS update

  -Fixed a problem with the gray screen when turn off Bluetooth in the BIOS Setup

  V2.15 BIOS can be downloaded here: http://support.lenovo.com/us/en/downloads/ds031724

  Thank you

• Bluetooth not available after upgrading the BIOS on HP g62-a60EM

  After upgrading the BIOS, I can't use bluetooth, as I can't see it in Device Manager. I've updated the BIOS with the file sp55430 on the support site. Battery is not holding a charge, it runs out after about 30 minutes. Back BONE back then now, I can use bluetooth. My OS is Windows 7 Professional 64 - bit - Slovenian.

  If anyone can help?

  Kind regards

  Dragan

  Hello

  Try to update the BIOS again. After that make sure that the wireless and Bluetooth lights is lit. Also download and installed the drivers of bluetooth and verification.

  After the BIOS also check in BIOS if Bluetooth is turned on:

  Menu of the System Configuration > Integrated device options > Enable/disable integrated Bluetooth Radio device
  

• the < option > tags can be selected after upgrade on iOS phones

  Hey everyone, I recently upgraded to an app that I created for a service from the hospital to the latest version of phonegap, and now I'm running into a problem where tags < option > < select > tags do not function correctly on the iOS phones.

  The feature works perfectly on iPad and Android sizes, but when devices on an iOS phone, selecting < select > area shows a spinner of screen scale with different choices of < option > set out, but they can not be selected. They can be scrolled but cannot type them and ask them to fill in the < select > and they fire a selection event has changed. The spinner just upwards on the screen until you click on something else in the application with a click listener.

  Initially, I was building my application to his generation phonegap, but in order to have a little more control to try to solve this problem I migrated the project on a local cli phonegap project. Both services have resulted in the same problem with iOS phone apps.

  Any idea what's going on? It's the same thing with each < select > tag in my application and it deploys the application completely unusable until this problem. I can provide more information if there is something specific that I forgot, but I can show only so much since the app is for a customer and they don't want post me too much about online.

  Thank you

  OK I managed to fix the problem myself sorry for not giving more information at the beginning.

  The problem is that the plugin Ionic keyboard I used was hiding automatically the toolbar in the picker select, so I just added this line to my unit ready to be sure.

  cordova.plugins.Keyboard.hideKeyboardAccessoryBar (false);

• Problems in connection to the mobile network after upgrading to iOS 9.2.1

  Upgrade to iOS 9.2.1 Thursday last on my iPhone 5. Mobile connectivity random but frequent problems faced since then - just lose network connectivity and the phone displays "No. Service" for long periods. Are gone to lift (Airtel, India) and according to them they also received 100 + complaints of users after they upgraded to iOS 9.2.1

  Amit,

  I am also facing the same issue... its really frustrating... in my case is not at all happened to the network... do not know if everyone from apple to do anything

• the 5s iPhone camera is still stuck in black screen after upgrading to iOS 9.2 still frozen just like with iOS 9.1

  I updated my iphone to iOS 9.1 5s, but the camera does not work, most of the time that it was stuck on the black screen. I read in a forum as there are a lot of users affected by the present. "Waited for the iOS 9.2, hoping that it will fix the bug. Finally iOS 9.2 has been launched. Happy to download it thinking that it is the answer to the question of the camera. For a while camera works perfectly, but after 2 days, it was stuck at the black screen forever. It worsen the problem of camera. Hoping someone can help me to fix my phone's camera. Thank you in advance.

  Try resetting your device. This will not erase your data stored on that device.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

  If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.

  Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

  As a final step, try recovery mode. Turn off your unit, then plug it to your computer with the hold home button. Hold down Home button until you see the logo of iTunes on the screen of your device. After that on your computer, you should see the iTunes window saying that your device needs to be restored to factory settings. Click Restore.

  More info here:

  https://support.Apple.com/en-us/HT201263

  If these steps do not work, contact Apple and ask for help.

  https://www.Apple.com/support/iPhone/contact/