After Windows Vista starts in a minute, or sometimes less my office goes from his normal self in a white pagecould someone please help me get back to my office?
I tried to restart my computer, but only to get the same result, I tried to backup and resture but my computer tells me always that it is restureing the computer already. If someone can help or has had the same promblem I would like to know what I could do?
Thank you
Dave.
Hello
- You receive an error message?
You can view these methods:
Method 1:
Please check if you face the same problem when recording in safe mode. It is a possibility that one of the non-Microsoft application or driver is causing this issue. Start in safe mode and make sure that us. If you are able to start properly in safe mode, we can perform a clean boot in order to find the root cause.
a. restart your computer.
b. when the computer starts, you will see your computer hardware are listed. When you see this information tap the F8 on your keyboard key repeatedly until you are presented with the screen Windows Vista Advanced Boot Options.
c. using the arrow keys, select the desired option of Mode without failure.
d. press the Enter key on your keyboard to start in safe mode of Windows Vista.
e. when Windows starts, you will be at a typical logon screen. Connect to your computer and the Windows Vista goes into safe mode.
f. do whatever tasks you need and when you are done, reboot to return to normal mode.
Step B.
If it works fine in safe mode try performing a clean boot in order to find the cause root.
See the article below for instructions on how to start your computer in a clean boot state.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.
http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer
http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer
Tags: Windows
Similar Questions
-
ServoApp appears after Windows Vista starts
"ServoApp" appears on the taskbar after starting Window Vista, what is it, how can we that to solve this problem?
Hello
-Did you change on your computer before the show?
-You have all programs associated with ServoApp?I suggest to start your computer to a State t clean booyou and check to see if the problem appears due to any third party software.
Note: Follow step 7 to your computer as usual.
-
Easy access - filter keys are automatically re-enabled after Windows Vista starts.
Hello!
I'm using Windows Vista and my problem is the following.
Even if I disable FilterKeys, whenever I start my computer, filter keys are enabled again.
This causes me to use the on-screen keyboard to connect (my keyboard is disabled), then I have to go to control panel - easy access and disable FilterKeys. Once I disabled it, I can use my keyboard.You can imagine that this is really boring to do this each time I restart my computer.
I tried to change the registry key: HKEY_CURRENT_USER\Control Panel\Accessibility\StickyKeys--> Flags = 507, and it did not work. (also tried value 506).
Suspicion, support, tip will be really appreciated.
Thanks in advance.
Ripka
HAE a look at this. Maybe what you need, if you have not already tried this method...
Disable the irritating sticky keys or filter dialog box shortcut keys
http://www.howtogeek.com/HOWTO/Windows-Vista/disable-the-irritating-sticky-filter-keys-popup-dialogs/For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.
-
Genuine key of Windows Vista Starter DVD already used after formatting PC!
I have a real DVD of Windows Vista Starter. It has been activated and worked very well. But after a few PC, formatting and reinstalling, it says key already used and I'll have a temporary profile with features in need!
My copy is authentic and I have the key, but it fails to activate! ???
Hello
Take the option phone, skip the automatic steps, and brace yourself for a real person explain to the.
"How to activate Vista normally and by Activation of the phone '
http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html
1. open the Start Menu.
2 in the white line (search) box, type slui.exe 4 and press enter.
3 select your nearest store and click the Next button. (See screenshot below)
4 click on continue in the UAC prompt.
5 a local phone number should apear with a set of numbers generated by Windows and displayed on your screen under step 2: . (See screenshot below)
NOTE: It will be a series of numbers within the 1 to 9. I just removed here for obvious reasons.6 call the phone number of activation chosen.
etc etc.
See you soon.
-
my windows vista starts normally until I have pass the user coice screene. After that, I see the cursor but everything is black. What should I do?
It was probably caused by the removal of any file system as I was scaning the pc for malware and probably deleted some important file. only safe mode works nowand I need my computer quite urgent for the University.Thank you very much!Hello
No saving necessary data and re-installing Windows Vista might be the best option, but here
are a few others.You can save your files by putting the drive in another computer as a 2nd disk (best) or external
Drive USB enclosure and then backup to removable media such as CD, DVD or other USB drives.
Of course a real store of the computer or the manufacturer of your system can help to recover the files.Or you can use a boot Ubuntu CD to back up data.
Use Ubuntu Live CD to backup files from your Windows computer dead
http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windows-computer--------------------------------------------------------------
You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel - device
Manager - graphics card - Double click on - driver tab - click on UPDATE driver - then right click
on devices and UNINSTALL - REBOOT.A method to try to get to the desktop (try in normal Windows Mode without failure) is CTRL +.
ALT + DELETE - Manager tasks and tab process EXPLORER.exe and COMPLETE the PROCESS on this subject - and then
on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is available by
repeatedly tapping F8 as you start. CTRL + SHIFT + ESC also begins the Task Manager.First check this thread in case it is simple and if not to come back to this thread.
Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
That there is no information on a black screen as it is on a blue screen just adds to the
Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
Google to see the proposed repairs, whom some have worked however these cover a wide
field efforts.Here's a video of one of them.
http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1
Here's another fix
http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.phpYou have a Vista disk? You can try restoring the system to it. If you don't have the disks your
system manufacturer will sell them at low prices. Or try in safe mode if you can get there.How to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.htmlYou can create a recovery disc or use someone even version (making the system restore it)
must be bootable).How to create a Vista recovery disk
http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html------------------------------------------------
These require the correct Vista discs since you can not start safe mode.
Try the Startup Repair tool-
This tells you how to access the System Recovery Options and/or with a Vista disk
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxTry recovery options Startup Repair
How to do a startup repair
http://www.Vistax64.com/tutorials/91467-startup-repair.html-----------------------------------------------
Here are a few Google searches where many have found different solutions:
Vista black screen - check that a 1st
http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10Vista black screen Solution
http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQIVista black screen Fix
http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI-----------------------------------------------
If necessary and you can access all ordinary Windows.
You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation
(if all goes well, the data records and need to reinstall programs). Be sure to do a good backup or three.You can use another DVD that aren't copy protected but you you need to own
Product key.On-site upgrade
http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htmIf nothing works, you can make a repair facility that must save the data but you will need to
Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
need to know your product Code.This tells you how to access the System Recovery Options and/or a Vista DVD
http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-consoleHow to perform a repair for Vista Installation
http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html---------------------------------------------------------------------------
Another method that works sometimes: at the command prompt, type of Vista startup disk:
(a line type or copy and paste one line at a time and hit enter - enter a bracket)
or "BOLD")c:
cd\
CD c:\Windows\System32\winevt (there is a space between cd and C :)
Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)
RESTART Windows
I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
My pc has even sent to ASUS and they said they had set, but within months, he started the error again. I even had a computer programmer look at the and reinstalling everything, but still the error comes and lately, it happens every time you start :(
Hello
I suggest you to follow these steps and check if that helps.
Method 1:
Try to start the computer in safe mode and check if the same problem occurs:
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-modeMethod 2:
Try to perform the clean boot and check if it helps:
http://support.Microsoft.com/kb/929135NOTE: When you are finished troubleshooting, make sure that restore you the computer mode normal startup such as suggested in step 7 of the above article.
It will be useful.
-
Original title: Msimbz32.dll
Hello
When my windows (Vista) starts coming, he said: "Msimbz32.dll is missing". What should I do?Best wishesHassanHello
Try the methods provided below and check if the problem persists.Method 1:
Msimg32.dllis a file system in Windows Vista
If you get the message when you open any program or when you start suggests that scan you SFC on the computer that would be a system file corrupt on the computer search and replace.
The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows Vista installation CD.
For more information please visit the link below.
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833
Method 2:
Perform the clean boot state helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.
See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 of the above article.
-
How to stop disk check to run every time that windows vista starts?
How to stop disk check to run every time that windows vista starts? I had a problem with one of my backup disks so I removed it, but now the drive is still running a disk check whenever I boot my system. It takes so long to run and there is no error, but it starts every time. Why and how can I make sure that she? I read similar questions, but they don't tell you how to run a disk check, they mention however that "If you want to cancel the regular disk for some reason check, check out this guide." but tell you what guide or link?
Hello
This tells you how to enable and disable it:
How to difficulty Chkdsk will not run at startup in Vista
http://www.Vistax64.com/tutorials/130824-CHKDSK-will-not-run-startup-Vista.htmlVideo: Stop Check Disk from constantly running at startup in Windows Vista
http://blogs.TechRepublic.com.com/itdojo/?p=193ChkDsk runs every time Windows starts.
http://www.WinVistaClub.com/T20.htmlI hope this helps.
Rob - bicycle - Mark Twain said it is good. -
Windows vista starts up on my dell inspiron 530 s.
Windows vista starts up on my dell inspiron 530 s. When I turn on my computer, I get a bootmng lack of press ctrl alt del to resart message. When I put my vista disk in my cdrom and resart it only tells my no detected bootdevice. help!!!!!!!!!!!!!!!!!!!!!!!
Hello
Try to use this information from Dell, including the F12 Diagnostics.
See you soon.
-
code 80070002 error appears during the update of windows vista starter
During windows vista starter updated operating system, the 80070002 error code appears on the screen and could not update and install something. How to solve the problem? Product key-33qmg-pb76m-kbpwd-mbqd3-k6ggk
80070002
Error message when you use the Windows Update Web site or the Microsoft Update Web site to install updates: "0 x 80070002.
http://support.Microsoft.com/kb/956698>
05/14 / 1104:51: 22 am
-
I need a product key, I lost my Windows Vista Starter pack
I need a product key, I lost my Windows Vista Starter pack with HCL laptop with the product id 89571-OEM-7332204-00608
If you reinstall using the manufacturer's recovery media, you should not have a key for Windows
If you try ot turn on Office applications, you must purchase a license.
Your own product key for Windows is on the COA sticker on the case of the machine - or possibly inside the battery compartment.
-
Windows Vista starts only with the loading screen
Original title: Problem with Vista Business
I have a pc with vista professional in this regard, there is a problem with the windows and it does not start, just on the loading screen. The machine came with a disc of recovery for xp only. I'm trying to find a download of Vista business so I can fix it rather than having to restore to XP. Anyone know where I can download it?
Hello RussellNolan,
It may be possible to solve this problem without having to reinstall the operating system.
What exactly happens when you try to start normally?
Let's start with the safe boot mode:
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
If it works, we can try to boot minimum troubleshooting:
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
Let us know if this helps out.
Best regards
Matthew_Ha
-
Windows Vista starts with an empty office
original title: when I turn on my DELL PC with VISTA I have no images desktop taskbar icon, none of this show is a program window, but it's a pain. Can it be fixed or that THX
What huh?
Hello
What of the 'safe mode' - did you try to run? Here's how:
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
and in safe mode, if it is possible, you can run "System Restore":
http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore
Choose the date , when the PC worked OK.
LC
-
Hola tengo windows vista starter wont in mi pc Hay algna forma mahjons titans get?
Hola tengo windows vista starter wont in mi pc Hay algna forma mahjons titans get?
Hello
Unfortunately, the community of Windows is able to provide support in English. The following URL will help you to receive support appropriate for your location information. Open the link and select your region from the drop-down list, and then click the arrow to continue.
-
How to omit entering the configuration page before that windows vista starts up?
Hello:
I have Windows Vista in my Inspiron 1420 and when I turned on my computer and appears the Dell logo, it shows at the top of the page: ¨preparing to enter the setup¨ and the configuration page appears in blue with all the features to install. I need to press the ESC key, then exit to continue to connect to Windows Vista. I hate that every time I turn on my Inspiron 1420 this page of configuration and connect inmeiatly. Help, please. Thank YOY.
Hello
If you have Windows Vista DVD, you can try to start the Windows Recovery mode startup repair and check if it helps.
http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions
If this isn't the case, you can try to contact Dell technical support for further assistance.
Maybe you are looking for
-
So I try to implement my 4th gen airport Time Capsule Version 7.6.7, for use with a server that I can access via the internet. I've seen many tutorials that say I need to activate the configuration over WAN. The image above is of the previous version
-
Cannot configure my Readynas 10200
I'm trying to set up my new Readynas 10200 with a MacBook Pro, but when I get to the screen where I am supposed to appoint my readynas and set the timezone, I get a "peripheral Communication error" tells me Readycould temporarily lost communication w
-
How to password protect the BIOS of Satellite A120?
I have laptop Satellite A120 240, to set up so I need to know an answer to this before we get too far into the project...These laptops should be used by children from the school and as such, we do not want their access to the BIOS. The BIOS is ACPI B
-
Pictures in "PHOTOS" will be displayed as images... However, when I put it up, they appear as a code... Any ideas?
-
15-d080ee HP: hp 15-d080ee no driver!
I go to the website to download the drivers for hp 15-d080ee and I don't get any file! This message is apper: No software or drivers are available for this product with the selected operating system. Please make a different selection, or visit thepro