After you change the raw file in CS6, jpeg looks dull and has weird tinge to it. I tried all color adjustments, but the result is the same throughout, jpegs of LR5 and 13 elements looks nice and consistent. How can I fix it?

Similar Questions

• I get the error message: maigration failed to transfer when I install Windows updates. How can I fix

  I get the error message: maigration failed to transfer when I install Windows updates. How can I fix

  Hello

  Thanks for asking!

  You cannot install updates Windows and error migration was not able to transfer.

  The problem can occur if the update of the components are damaged.

  Is the message of exact error that appears?

  I suggest you to reset the update components and check if the problem persists.

  See the site:

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Warning: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows XP

  http://support.Microsoft.com/kb/322756/

• When you type an e-mail, when I go to the next line, it jumps two lines instead of a single line. How can I fix it?

  I was typing an email and when I would go to the next line, it will skip two lines instead of a single line. How can I fix the problem?

  I'm not sure that you understand the problem. Could include a screenshot of it just after what happens?

  If you need help to create a screenshot, please see How to make a screenshot of my problem?

  Once you have done so, attach the file to screen shot saved to your post on the forum by clicking on the button Browse... under the box to post your reply . This will help us to visualize the problem.

  Thank you!

• The photos on my site header are not formatting correctly in Mozilla. How can I fix it?

  Hello

  Photos header on every page of my site are not formatting correctly in Mozilla. The photos appear on the right side of the site and you need to scroll over to see. They work on other browsers such as Chrome and Safari. How can I fix it? Here is the link to my site: http://cpd.berkeley.edu/.

  Thanks for your help!

  What is even more strange, is that if you reload the page in version 33, it's in the right place. This happens on the Beta? https://www.Mozilla.org/en-us/Firefox/channel/

  If the problem persists, please clear the cache and refresh the page, then if it happens again please webcompat.com create a bug here report.

• How to make a VB script on the computer after you change the files?

  Original title: HI! I have to run a VBscript on windows7 as modfying user (not administrator) files in c:\program files\mycompany. Is this possible?

  It works to disable the UAC. There is no way to let him work with UAC on? (Perhaps change somehow permissions files?)

  You have two options:

  • Turn off UAC (not recommended)
  • Change the script so that it generates a UAC challenge (to which the user must respond with an admin account & password).

• Bootcamp (Win10) has not started after you changed the partition and updated at El Cap.

  I have a MacBook Pro (retina, 15 inches, end of 2013), 2 GHz Intel Core i7 with 8 GB of Ram.

  I had 2 system installed, Win 10 + Yosemite from the windows of beginning and the use of most of the time.

  Yesterday, I ran out of disk space and passed the partition in OS X with disk utility.

  While I changed the partition and I also upgraded to the El Cap.

  After all, I can't start by winning 10 more, although I could see my windows in the startup disk Control Panel.

  I checked some thread here and mess with command autour terminal, but nothing has worked for me.

  Here is the result of diskutil:

  Jerbins-MacBook-Pro: ~ the jerbinyuan list $ diskutil

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 251,0 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_HFS Macintosh HD 70.1 GB disk0s2

  3: disk0s3 Apple_Boot Recovery 650.0 MB HD

  4: Microsoft data base BART 30.0 GB disk0s4

  5: Microsoft database HOMER 150,0 GB disk0s5

  Jerbins-MacBook-Pro: ~ list of cs jerbinyuan$ diskutil

  No logical volume group CoreStorage found

  Jerbins-MacBook-Pro: ~ jerbinyuan$ sudo TPG - vv - r show/dev/disk0

  Password:

  See the TPG: / dev/disk0: mediasize = 251000193024; SectorSize = 512; blocks = 490234752

  See the TPG: / dev/disk0: MBR suspicious to sector 0

  See the TPG: / dev/disk0: Pri GPT to sector 1

  See the TPG: / dev/disk0: GPT Sec at sector 490234751

  start index size summary

  0 1 MBR

  1 1 Pri GPT header

  2 32 table GPT Pri

  34 6

  40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B

  409640 136992184 2 part TPG - 48465300-0000-11AA-AA11-00306543ECAC

  137401824 1269536 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC

  768 138671360

  138672128 58595328 4 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7

  197267456 292966400 5 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7

  490233856 863

  490234719 32 table dry GPT

  490234751 1 dry GPT header

  Jerbins-MacBook-Pro: ~ jerbinyuan$ sudo fdisk/dev/disk0

  Disk: geometry / dev/disk0: 30515/255/63 [490234752 sectors]

  Signature: 0xAA55

  From end

  #: cyl hd s - cyl hd s id [Start - size]

  ------------------------------------------------------------------------

  1: EA 1023 254 63 - 1023 254 63 [1-409639] < unknown ID >

  2: AF 1023 254 63 - 1023 254 63 [409640-136992184] HFS +.

  3: AB 1023 254 63 - 1023 254 63 Boot Darwin [137401824-1269536]

  4: 0 b 1023 254 63-1023 254 63 [138672128-58595328] Win95 FAT-32

  Jerbins-MacBook-Pro: ~ jerbinyuan$ sudo dd if = / dev/rdisk0s4 account = 1 2 >/dev/null | hexdump - C

  00000000 2nd eb 58 90 42 53 44 20 20 34 34 00 02 20 20 00 | X.BSD 4.4...  .|

  00000010 02 00 00 00 00 00 00 20 00 f8 ff 00 00 f8 43 08 |... C. |

  18 00 00000020 7th e0 03 37 00 00 00 00 00 00 02 00 00 00 |... ~... 7..........|

  00000030 01 06 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |... |

  00000040 80 00 29 11 14 2f 2 a 42 41 52 54 20 20 20 20 20 |..) ... / * BART |

  00000050 20 20 46 41 54 33 32 20 20 20 31 c0 d0 bc 8F fa |  FAT32. 1... |

  00000060 00 7 c fb 8th d8 e8 00 00 83 19 bb 07 00 fc 5th c6 | | ......^.......|

  00000070 c0 ac 84 74 b4 06 0e cd 10 eb 30 cd 16 cd e4 f5 |... t... 0....|

  00000080 19 0D 0a 4th 6f 6F 2d 73 79 73 74 65 6 d 20 64 69 |... Nonsystem di |

  00000090 73 6B 0D 0 a 50 72 65 73 73 20 61 79 20 6 6 b 65 | SK... Press any ke |

  000000a 0 79 20 74 6f 20 72 65 62 6f 6f 74 0D 0 a 00 00 00 | is reboot... |

  000000b0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |... |

  *

  000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |... U. |

  00000200

  Jerbins-MacBook-Pro: ~ jerbinyuan$ diskutil info/dev/disk0s5

  Identifier of the instrument: disk0s5

  Device node: / dev/disk0s5

  Set: No.

  Part of the whole: disk0

  Device / media name: BOOTCAMP

  Volume name: HOMER

  Gendarmerie: Yes

  Mount point: / Volumes/HOMER

  Personality of file system: NTFS

  Type (Bundle): ntfs

  Name (Visible to the user): Windows NT (NTFS) file system

  Partition type: Microsoft Basic Data

  Operating system can be installed: No.

  Media type: generic

  Protocol: PCI

  Smart: checked

  Volume UUID: 4EC75B8E-02A8-4B26-B7F3-5EA9D0A47FA9

  Disk / Partition UUID: 776C43C1-7E4C-4997-BDF5-A91FD406DEBD

  Total size: 150.0 GB (149998796800 Bytes) (exactly 292966400 512-Byte-units)

  Amount of free space: 18.5 GB (18479718400 Bytes) (exactly 36093200 512-Byte-units)

  Device block size: 512 bytes

  Allocation block size: 4096 bytes

  Support read-only: No.

  Volume read-only: Yes

  Location of the device: internal

  Removable media: no

  Solid State: Yes

  Thanks for help.

  Please follow the steps described in [help] can not boot Windows (8.1) after partition resizing .

• Unable to connect to ESXi via vSphere Client after you change the setting LAN card

  Dear friends,

  I changed my setting of the NIC (from 100 M to 1000 M) via VMware vSphere Client. And now I can't connect to my server ESXi. Because I can not connect to the ESXi server, the network card user interface of the parameters provided by vSphere client is not available. How can I recover it? Thank you if someone could help it.

  Welcome to the vmware forum!

  Try this

  [root@server root] # esxcfg-NICS-s-100 d full vmnic0

  Of

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1004089

• Problem with HP photosmart more B210a CN216B of printer after you changed the cartridge

  Anyone know why the ink can not come through when I install a new ink cartridge?  I changed the that many times before, but it does not print.  I should shake the cartridge, moisten the place where the ink comes out, clean the print head and if so, how?  Any other suggestions?  Thank you

  Hello

  Click here for the steps to install a cartridge.

  If you did above correctly and the problem persists, perform the below mentioned steps...

  On the printer, press the Setup > TOOLS > CLEAN printhead

  Note: You may need to perform the steps mentioned above for 2 - 3 times.

  Now try to print, it should work.

  Kind regards
  Jabzi

  Help the community by marking this post.
  Your question has been answered? Mark it as a accepted Solution!
  See a great post? Give a Kudos!
  I work for HP

• 500-internal Server Error - after you change the user public apex

  Hello

  I executed change order use to change the password for apex_public_user new password but he beat Apex earpiece and entire work of workspace cant Apex now, how can I solve this problem?

  Apex 4.2.4,

  Thank you.

  Tony,

  When I run the apex.war file and specify the same values as before / previous samples below will suffice that or ive to modify other files after that because we already have existing environment with application developed, but I don't want anything an impact?

  java-jar apex.war of installation

  May 1, 2014 11:36:03 oracle.dbtools.common.config.file.ConfigurationFolder logConfigFolder

  INFO: Using the configuration file: / u01/app/oracle/apex_listener/apex

  Enter the name of the server database [localhost]:linux03.vbox

  Enter the database listening port [1521]: 1521

  Enter 1 to specify the database service name, or 2 to specify the SID database [1]: 1

  Enter the database service name: snap11g

  Enter the database user name [APEX_PUBLIC_USER]: APEX_PUBLIC_USER

  Enter the password for the database for APEX_PUBLIC_USER:password1

  Confirm the password:

  Enter 1 to enter passwords for users of database Services RESTful (APEX_LISTENER, APEX_REST_PUBLIC_USER), 2 to use the same password that you used for the APEX_PUBLIC_USER, or 3 to skip this step [1]: 2

  Update may 1, 2014 11:37:12 oracle.dbtools.common.config.file.ConfigurationFiles

  INFO: update of configurations: by default, apex, apex_al, apex_rt

  Thank you.

• recentley most of the documents in firefox to print prints on 1/4 of the page and not the full document. When I print the same thing in safari, it prints very well. Please tell us how can I get good print in firefox

  If you use Firefox to print most documents (boarding cards, identified mastercard, genealogy documents) printing shows only 1/4 of the page, is located in the left lower quadrant and doesn't print not part on the right side of the information. When I go into Safari and print the same documents in 2 minutes what they always print very well. We like Firefox and prefer to continue to use, but if we are unable to print, we use Safari more often

  • How to print web pages in Firefox
  • Correction of the printing problems in Firefox

  Check and tell if its working.

• Cannot connect online after you change the settings system locale

  Hello

  Right now I have my locale Japanese system, it was originally English (United States). I can connect to the internet just fine until I have change the local back to English. Once I've got change for English I can't seem to connect online. I tried all the steps to fix the internet connection, but nothing helped.  However, if I set the locale Japanese system once again, my connection works fine as if there was nothing wrong with it in the first place.

  I must be able to connect with the English locale, so if anyone has any suggestions, I'd be very happy.

  Hello

  If connection involved any kind of ID / password etc you have to type in (or it is saved in the cache/shape) you will have to redo, or clear the cache.

  Language change can alter the charchters game and produce grabled id/pw and other identification information.

  Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET

• I have a problem with the connection to the computer after you change the user name.

  Original title: HELP

  I changed the username on my laptop and it is not letting me log

  I changed the username on my laptop and it is not letting me log

  Here you go:

  1. Set your BIOS so that it uses the DVD drive as its primary boot device.
  2. Start the computer with your Windows 7 repair CD.
  3. Press a key when prompted to boot from the DVD.
  4. Select 'PC Repair' in the menu.
  5. Select 'Repair' when prompted.
  6. When you are prompted, select System Restore.
  7. Configure Windows to a point before you have changed the user name.
  8. Plan ahead a little and create, test and document an alternative admin account, same as you have a spare emergency House key. This will save you a lot of trouble.

• I installed the latest version of Adobe, now my games is huge and unreadable, how can I fix it

  I installed the latest version of Adobe, now my games is huge and unreadable, how to fix this?

  You should find the forum for any product it is and post your questions there.

  Here is a link to a page that provides links to all of the Adobe forums...

  The Forum links page: https://forums.adobe.com/welcome

• Problems for existing VM after you change the parameter VT PowerEdge 2950?

  Hello

  We have ESXi 4 installed, a number of servers windows 2003 32 bit running but need to install Server 2008 64 bit. Didn't know that these parameters were until he is tried to install 64 bit OS and got the error message. I read through other posts, but haven't seen a direct answer to this question:

  Are there any negative potential impact for my 32-bit servers existing after I enter and change VT enabled, NX enabled?

  Thank you

  cwhicks wrote:

  Are there any negative potential impact for my 32-bit servers existing after I enter and change VT enabled, NX enabled?

  No.; for 32-bit Windows 2003 by default execution mode is binary translation, if VT is enabled in the BIOS.

  If your Windows 2003 guests are running with SP2, you may find that you can get better performance by changing the mode of execution to VT - x (or VT-x/EPT on systems with EFA).  Before SP2, you definitely want to stay with binary translation.

• What should I do on vCenter vSphere Web Client after you change the host root password?

  Hello

  When we implemented vCenter our Organization, we used a regular password to the account 'root' on each ESXi host.

  So, I installed vCenter and added the hosts on it to manage.

  When I added them, they've asked for the root password power connect.

  Ok. Everything was fine.

  Now, we want to change the password to root for each ESXi host.

  My question is: what should I do to make sure that vCenter will always be able to connect to the ESXi hosts, because the account used to connect the first time change his password?

  My question is: what should I do to make sure that vCenter will always be able to connect to the ESXi hosts, because the account used to connect the first time change his password?

  Nothing, after the host is added to vCenter, a user named vpxuser is created automatically on the ESXi host and vCenter uses this user to connect and manage the host.