After you enable the "Click-to-play" plug-ins, I can't open the pdf files.

Similar Questions

• Random letters appear after you save the PDF file

  Hi all

  One of my colleagues has found that a part of the text is after registration of a PDF document and re - open randomly changed. She works in Acrobat Pro XI.

  In one case, some of the numbers had changed to the decimal (diaphragm openings).

  In another case, a number had simply disappeared (example: 126-128 became 16-1, the 2 and 28 disappeared).

  Still another example text and numbers have been replaced with apostrophes and letters uppercase ' A'.

  It seems that in all cases, only the changes are limited to a particular text box that has been copied and pasted throughout each of the documents. Hereby, I want the text box began to Doc1 and was then copied into Doc2. Rather, I mean that there is a textbox which is copied and pasted on the various pages of the Doc1 and an area of separate text which has been copied across multiple in Doc2 pages and so on.

  Has anyone encountered this problem before? I tried searching for similar cases, without success, if anyone can point me in the direction of a similar position please do not hesitate.

  Otherwise whatever you think I could do to avoid these problems that occur.

  Any help on this would be greatly appreciated.

  Sincere greetings

  Bluekable

  The only solution I found to print a Web page using the Adobe printer is uncheck the box-"rely on system fonts only; do not document fonts ".  This box is available in the Preferences tab after selecting the Adobe printer.

• After you change the raw file in CS6, jpeg looks dull and has weird tinge to it. I tried all color adjustments, but the result is the same throughout, jpegs of LR5 and 13 elements looks nice and consistent. How can I fix it?

  After you change the raw file in CS6, jpeg looks dull and has weird tinge to it. I tried all color adjustments, but the result is the same throughout, jpegs of LR5 and 13 elements looks nice and consistent. How can I fix it?

  Make sure the jpg has embedded sRGB profile.

  In what application you view jpg files?

  The symptoms you describe are typical of images with Adobe RGB or ProPhoto read in an application that does not support color management.

• After the trial of Acrobat XI ended, I can't open any pdf files.  What should I do?

  the trial of acrobat XI has expired, and now I can't open any pdf files.  What should I do?

  Hi carolyncipriano

  Only 2 Solutions for you...

  1 either purchase Adobe Acrobat and use the serial key to activate your Acrobat.

  2 or download the free Adobe Reader to view PDFs...

• I can longer open attached pdf files. I am able to preview the files, but they are too small for me to read.

  * Original title: attachments

  Help, please.

  I did something wrong (AGAIN!)

  I had no problem with access to attachments to my e-mails, but a problem occurred just.

  I can longer open attached pdf files.  I am able to preview the files, but they are too small for me to read.  When I click to open all the I get now is a kind of icon (in Microsoft Office Picture Manager) with which I can't do anything.

  It seems I should have arranged for Picture Manager automatically opens attachments to emails, but when this happens, I'm stuck as what I try, I can't do pdf files appear as they did.

  The help file does not really help.

  I hope it is something simple, even an old fool like me can do with your expert (and, I hope. friendly) help.

  My fingers are crossed.

  My apologies if I offended Protocol - this is my first venture.regards

  Octogenarian John

  PS My usual guru (aka grandson James) has acquired his first girlfriend, is not so disinclined to waste time me tutoring on the PC

  Create a file association.

  1. download and save the attachment to the office.
  2. right click on the saved file.
  3. Select: Open with on the shortcut menu.
  4. click on: choose [default] program.
  5. Select: (Whatever you have installed a PDF reader).
  6. check: always use the selected program to open this type of file.
  7. click on OK.

  This should allow you to open these attachments directly from email address now.

• Acrobat Reader DC works fine and opens a PDF file without problem - until I have a word document open as well-, then the PDF file crashes. I can't open a PDF file, a word document is also open.

  Acrobat Reader DC works fine and opens a PDF file without problem - until I have a word document open as well-, then the PDF file crashes. I can't open a PDF file, a word document is also open.

  For troubleshooting, you can disable the Protected Mode (https://helpx.adobe.com/reader/using/protected-mode-windows.html#id_94783) and see if that solves the problem. If the problem persists, please re-enable the Protected Mode to improve safety.

  Let us know how it goes.

• How can I open a pdf file... the computer simply stopped to open, will not restore is

  Have always been able to open attachments.  Don't know why, but now none will open.  I tried several times to restore to an earlier date, but that would not go through

  I think that a file is missing... so it cannot restore.   Thanks for any help, Christine

  If you do not have a PDF reader, you can not open a PDF file. Start by installing this.
   
  Foxit Reader
  http://www.foxitsoftware.com/PDF/reader/

• I can't open a pdf file of network.  I get the error, "there was an error opening this document. This file is not found. "If I copy it to the desklop can I open it.

  I can't open a pdf file of network.  I get the error, "there was an error opening this document. This file is not found. "If I copy it to the desklop can I open it.

  I have Adobe Acrobat XI version 11.0.12 and running windows 8.1

  Hi brianh66664582,

  Try the solutions suggested in this thread Re: could not open the files on the network server..

  Kind regards

  Nicos

• How can I resolve after 'save' before I can even open a PDF file?

  I have Adobe Acrobat 9 Pro (9.5.5) and a recent arrival update thru I'm no longer able to simply click and discovers the PDF sent, but am now need to save it before viewing.  Is there a simple way to correct this back to the old?  I don't want to just save on my computer; just the items I need.  Thank you

  This looks like an update to your e-mail (probably Outloook). You can consider trying a different like Thunderbird mail client. Another option could be to attempt a repair on the Help menu in Acrobat. There may also be a flag in your e-mail client for which application to use to open a PDF file. Sometimes this based on the settings of MS Explorer. The latter can be checked by seeing if you can open a PDF file by double-clicking it in Explorer.

• Can't get into Bios after you enable the sata port

  Hello community,

  I have an Optiplex 755 and added a second hard drive.

  In bios the sata 2 and 3 ports have been disabled, I enabled both because I know not didn t on the port of witch the new drive has been connected.

  After a reboot the system stuck on ' Drive 3 not found: Serial ATA, sata-3.

  When I disconnect the new drive, I get the above message for 2 and 3 of the road car!

  I can only power the system off, the keyboard is not working at the moment. After a reboot, I can select F2 or F12, but the system will be blocked with the same error.

  I tried a third device to the port missing but then there is no error message, but there is only a black screen with a blinking cursor. No chance to get into the bios setup.

  The version of the bios is A08.

  Can someone help me please.

  Hi Andreas,

  Thank you for compensation for me!

  What may help is to reset the BIOS. To do this, you must follow the steps detailed here: ftp.dell.com/.../optiplex-755_user%27s%20guide_en-us.pdf (search for clearing the CMOS settings).

  Before the passage of the system back on, make sure that the system is in its state of origin (the original hard drive and optical drive). This can allow you to start the operating system successfully and access the configuration of the system as well.

  Let me know how you go!

• After you import the avi file to new laptop, reading looks like he will ignore the frameworks

  I created successfully a project of first Pro CS5 using my desktop computer computer (i7 with dedicated NVIDIA graphics card) without any problem. I then imported the video file avi created on my desktop to my old laptop (intermediate level) with the same edition of Premiere Pro is installed and enabled in Premiere Pro create a new project it without any problem reading. After moving first Pro CS5 to my new laptop higher end, I imported the avi file of the desktop to create a new project on the new laptop, but when I went to play the video in Premiere Pro on the new laptop, the picture is shaking during playback as executives are to be ignored. The new laptop is far superior to my old, so I don't know what is the issue. The new laptop is an i7, 64-bit, 8 Gig RAM, NVIDIA GeForce 650 M graphics card.

  Is there a different setting that I needed in Premiere Pro on the new laptop computer?

  Here are the details of video file:

  Image size: 720 x 480

  Sampling: 32

  Frame rate: 29.97

  Audio Format: 48000 Hz - 16-bit - stereo

  Project Audio Format: 48000 Hz - 32 bit floating point - stereo

  Total duration: 00 41; 31; 17

  Average: 3.6 MB/second

  Format of the pixels: 0.9091

  AVI file details:

  Contains 1 track (s) of the video and 1 audio track (s).

  Interleave: 1: 28.99

  Video track 1:

  Size is 8,34 G bytes (medium frame = 123,44 K bytes)

  There are 74673 keyframes.

  Frame rate is 29.970 fps

  Image size is 720 x 480

  The depth is 24 bits.

  Audio track 1:

  The size is 456,22 M bytes

  Rate is 48000 samples/s

  The sample size is 16-bit

  Taking your advice, I discovered an error of 'beginner '. When I imported the AVI from my office, I was a hypothesis that it was copied to the disk on my new laptop... Oops! The glitter is attributable to the project on the laptop trying to access the file through the network traffic. When I copied the avi file on my laptop, then created a new project in the key of my laptop - problem solved. Thank you, Jim, the suggestion on several disks. I'm immediately incorporate.

• After you import the MSWMM file in Windows Movie Maker, the system hangs

  MSWMM FREEZES (what a surprise)

  After opening MSWMM and import my project that the cursor movement will begin erraticaly i.e. movement one or two seconds after I try to point and the operation I required will take his time is erratic in the activation and the images are erratic when read.
  A minute or two later everything "freezes". I had to 'Leave' to turn the computer off, wait one minute, then restart. It's so bad now, I had to stop using MSWMM, it's useless and a great disappointment to me. When I exit MM the cursor is always random for about 10 seconds. How is the mighty Microsoft Corp. cannot challenge these problems and let us get our projects?
  All other times, the computer works fine. I have not downloaded anything to cause this problem. I've defragged, Spybotted Temp files deleted, disc error checked, tried different suggestions of Youtube, and restored hoping can solve it, no luck.
  I run WINDOWS XP, 128 processor ATHLON, 56 k MODEM, 1.5 GB RAM, 120 GB HDD, IE7, Service Pack 3.I have made 10 videos previously and had a bad light with MM before but he managed to cope, now that's too bad. So, does anyone have helpful suggestions to what I can do to fix this problem so I can continue with my projects, please?

  After opening MSWMM and import my project that the cursor movement will begin erraticaly i.e. movement one or two seconds after I try to point and the operation I required will take his time is erratic in the activation and the images are erratic when read.
  A minute or two later everything "freezes". I had to 'Leave' to turn the computer off, wait one minute, then restart. It's so bad now, I had to stop using MSWMM, it's useless and a great disappointment to me. When I exit MM the cursor is always random for about 10 seconds. How is the mighty Microsoft Corp. cannot challenge these problems and let us get our projects?
  All other times, the computer works fine. I have not downloaded anything to cause this problem. I've defragged, Spybotted Temp files deleted, disc error checked, tried different suggestions of Youtube, and restored hoping can solve it, no luck.
  I run WINDOWS XP, 128 processor ATHLON, 56 k MODEM, 1.5 GB RAM, 120 GB HDD, IE7, Service Pack 3.I have made 10 videos previously and had a bad light with MM before but he managed to cope, now that's too bad. So, does anyone have helpful suggestions to what I can do to fix this problem so I can continue with my projects, please?

  =======================================
  . MSWMM would be your Movie Maker project file if it is a
  complex big project that you have been working on for a while it
  can be to reach the limits of your system resources.

  Creation of several small projects is better than a large
  project. If you save all of them in the movie .wmv format you
  can import movie collected files and combine them into
  one final film.

  Also... it may be interesting to try to install IE8... I remember
  See the reports of users of Movie Maker who has
  with IE7. Personally, I went straight from IE6 to IE8.
  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  More information:

  Movie Maker 2 hangs and crashes
  http://www.Papajohn.org/mm2-issues-acceleration-and-codecs.html

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• After you import the image files into Lightroom, Lightroom does not show my folder hierarchy.

  Before I started using Lightroom, I got my pictures organized in a hierarchy of folders.

  My_images	A	A1
  		A2
  	B	B1
  		B2

  (The actual structure is deeper than this example a few levels.)

  I imported the A1, A2, B1, B2 files in Lightroom and gave them the keywords that reflect the folder structure.

  Now, when I look in Lightroom under folders, the structure is gone (it is still there on my drive). All I see is a list of A1, A2, B1, B2 files, so it is difficult to navigate to the folder that I want to work with.

  How can I get Lightroom to display the folder structure in that my images are in fact?

  Found a solution. Right click the folder and select "show parent folder.
  Repeat this operation several times until you see the folder structure you want.

• After you rename the data file, cannot start database

  Oracle 11 g 2
  OEL 5 (ASM)
  Network infrastructure (cluster install) - no CARS yet
  
  Something interesting happened. Perhaps this question might be more suited to the "ASM" section, but that's.
  
  I gave a data in ASM file an alias with the following command (the ASM instance):
  

  SQL> alter diskgroup DATA add alias '+DATA/oradb/datafile/users01.dbf' for '+DATA/oradb/datafile/users.253.795630487';
  
  Diskgroup altered.

  Then, as mentioned in Note: 564993.1, we need to update the database as well with the new alias. However, when I went to the stopping and starting of the database, I received the following:
  

  SQL> shutdown immediate;
  Database closed.
  Database dismounted.
  ORACLE instance shut down.
  SQL> startup mount;
  ORA-12514: TNS:listener does not currently know of service requested in connect descriptor

  It's strange. Nothing has changed except the alias being added to the data file. This is all before operation. That's happened?
  
  I think that it may have to do with the different ASMOPER, ASMADMIN, ASMDBA groups that have been installed as part of the installation of the grid Infrastructure. In addition, the listener is running out of the GI home.
  
  All my variables environment (e.g. ORACLE_SID, ORACLE_HOME, etc.) are defined.
  
  Any ideas?
  
  Thank you.

  Hello
  When you connect with tnsnames alias while the database is down the listner did not know the service, so you must start the database on the server database with sqlplus / as sysdba. After starting the registry of data base with the listener and your connection works again.
  Alternativ you can add a service to your listener.ora to connect with him while he is arrested, as long as you do not have it you must use local connect which means sqlplus / as sysdba.

  concerning
  Peter

• How the hell can I open this PDF file? !!!

  Original title: how the hell can I open this file? !!!

  I have files which are "PDF" files, but I can't open them.  What I am doing wrong?

  Do you have a PDF Reader installed?

  Adobe Reader
  http://get.Adobe.com/reader/

  Foxit Reader
  http://www.foxitsoftware.com/PDF/reader/

  Adobe is more "well known", but Foxit is much more compact and my personal preference.

  Bruce Hagen
  MS - MVP October 1, 2004 ~ September 30, 2010
  Imperial Beach, CA