After you have configured remote access on Server 2003, I am unable to find the 'users Active Directory & computers'.

Similar Questions

• OBIEE 11.1.1.7.0 works is not after you have configured to use authentication MSAD (Active Directory)

  Hi all

  I'm trying to configure OBIEE 11 g to use the MSAD (Active Directory) authentication. I followed the instructions of Configuration Oracle BI with Oracle Internet Directory , but after a restart all services, I do not get connect OBIEE. I've hearded that there is a bug in this version (11.1.1.7.0) when you rearrange the suppliers and put the new (that you created) as the frist, followed by DefaultAuthenticator and DefaultIdentityAsserter providers.

  Someone had this problem? How to resolve that? Is there a URL or DocID teach how this is set correctly?

  Thanks in advance,

  Concerning

  is even if you have 10 k + users it will show only 1000, this is the limitation, but you can still find the users from the top by clicking on customize the table, it options you give the criteria in filter and view display, you can select the column by which you can search for example: by using the name or description, or Provider(AD or Default) in this path , you can search for specific users you want to see or Alvaro * so it will give u the list whose name start with Alvaro

  I hope it helps brand if not

• After you have uninstalled an editor audio wave cushion, my DVD stopped playing with the error: because there is a problem with the digital copy between your DVD drive decoder and video card protection.

  my dvd will not play after you have uninstalled an editor audio wave pad. Is there a way to fix my dvd without reinstalling the program? I received the following message, (Windows Media Player cannot play this DVD because there is a problem with the digital copy between your DVD drive decoder and video card protection. Try to install a driver available for your video card).

  my dvd will not play after you have uninstalled an editor audio wave pad. Is there a way to fix my dvd without reinstalling the program? I received the following message, (Windows Media Player cannot play this DVD because there is a problem with the digital copy between your DVD drive decoder and video card protection. Try to install a driver available for your video card).

  ================================================
  If the uninstallation of software caused the problem... it may be worth trying to
  do a system restore to a time before the software has been uninstalled:

  Windows 7 system restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

• After you have configured the AAU for the first time in the GUI, not able to access the console of the AAU

  Hi all

  I'm setting up cluster for WCC (University Complutense of MADRID and IPM) environment. I moved the cs folder in a shared location (cluster env), connected to the AAU console for the first time and on the page of any given configuration him shared location of path.

  The University Complutense of MADRID on node 1 server has started successfully, but not able to log in (get a 403 forbidden error)

  Save file entry: -.

  < 5 January 2016 3:36:14 PM GMT + 00:00 > < error > < ServletContext - > < BEA-000000 > < there is a failed to initialize at the start of the AAU. >

  < 5 January 2016 3:36:14 PM GMT + 00:00 > < error > < ServletContext - > < BEA-000000 > < could not start server "server" to the URL by default relative web root "cs".

  javax.servlet.ServletException: could not start a deployment of servers of IDC.

  to idcservlet. ServletUtils.initializeContentServer (ServletUtils.java:1268)

  to idcservlet. ServletUtils.startAndConfigureServer (ServletUtils.java:531)

  to idcservlet. ServletUtils.initializeAllServers (ServletUtils.java:460)

  to idcservlet. IdcFilter.initContentServer (IdcFilter.java:181)

  to idcservlet. IdcFilter.init (IdcFilter.java:156)

  Truncated. check the log file full stacktrace

  Caused by: java.io.IOException: Oracle WebCenter content could not initialize inside the servlet environment.

  at intradoc.idcwls.IdcIntegrateWrapper.initializeServer(IdcIntegrateWrapper.java:139)

  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

  at java.lang.reflect.Method.invoke(Method.java:597)

  Truncated. check the log file full stacktrace

  Caused by: intradoc.common.ServiceException:! csResourceUtilsFileIOError! csResourceUtilsFileReadError, activestate.hda

  at intradoc.resource.ResourceUtils.serializeDataBinderWithEncoding(ResourceUtils.java:348)

  at intradoc.resource.ResourceUtils.serializeDataBinderWithEncoding(ResourceUtils.java:191)

  at intradoc.resource.ResourceUtils.serializeDataBinder(ResourceUtils.java:64)

  at intradoc.server.ActiveState.serializeData(ActiveState.java:221)

  at intradoc.server.ActiveState.load(ActiveState.java:58)

  Truncated. check the log file full stacktrace

  Caused by: java.io.IOException:! syUnableToCreateDateFormat, M/d {/yy} {hh: mm [: ss] {a}} \!mAM\,PM\!tGMT0!syUnableToParseTimeZone

  at intradoc.data.DataSerializeUtils.determineParameterizedLocalization(DataSerializeUtils.java:373)

  at intradoc.serialize.DataBinderSerializer.receiveEx(DataBinderSerializer.java:550)

  at intradoc.data.DataSerializeUtils.receiveEx(DataSerializeUtils.java:87)

  at intradoc.data.DataBinder.receiveEx(DataBinder.java:2080)

  at intradoc.resource.ResourceUtils.serializeDataBinderWithEncoding(ResourceUtils.java:327)

  Truncated. check the log file full stacktrace

  Caused by: intradoc.common.ParseStringException:! syUnableToParseTimeZone

  at intradoc.common.IdcDateFormat.optimizeFormat(IdcDateFormat.java:692)

  at intradoc.common.IdcDateFormat.initEx(IdcDateFormat.java:291)

  at intradoc.common.IdcDateFormat.initWithDefaultTimezone(IdcDateFormat.java:187)

  at intradoc.common.IdcDateFormat.init(IdcDateFormat.java:151)

  at intradoc.data.DataSerializeUtils.determineParameterizedLocalization(DataSerializeUtils.java:364)

  Truncated. check the log file stacktrac full

  Help, please.

  Kind regards

  Vipul

  Caused by: java.io.IOException:! syUnableToCreateDateFormat, M/d {/yy} {hh: mm [: ss] {a}} \!mAM\,PM\!tGMT0!syUnableToParseTimeZone

  Caused by: intradoc.common.ParseStringException:! syUnableToParseTimeZone

  Have what version of the WCC you installed?

  Do you have any specific time format located in ucm config.cfg? If so, then comment out him, and then start the server.

  You have the time zone set to GMT0? This can be checked from the activestate.hda file.

  Try the following solution to replace the zone on all had file on /ucm/cs

  Perl-e ' s/tGMT0/report/g;' -pi.save $(trouver /ucm/cs-type f)

• Unable to connect with RDP after you have configured the port forward

  I have configured my router with port pushing forcefully with port 3389. Now when I try to rdp to the pc from outside I get the following error:

  Remote Desktop cannot connect to the remote computer to one of the following reasons:

  1. remote access to the server is not enabled

  2. the remote computer is disabled

  3. the remote computer is not available on the network

  I checked that all these 3 does not apply to me. I was able to RDP pc (with the local ip address) from another pc in my network home but not from outside. Could someone help me please?

  Is the computer on which you want to connect with Remote Desktop [DRC], IE. the DRC, by using a host address static IP on your LAN? In the contrary case and the computer is restarted its possible its LAN IP address changed by denying any plan of port forwarding you set up in your router. Go to the site CanYouSeeMe and host DRC computer test.

  http://www.canyouseeme.org

  Also, when the connection to make sure that you really test from a client outside the DRC and does not use the public IP address of the router from a local computer on your local network.

  http://theillustratednetwork.MVPs.org/RemoteDesktop/TroubleshootingDiagrams/Basic.html

  Finally you are sure that the public IP address of the router has not changed? If you have a dynamic IP from your ISP, you can use a free as no - IP.com that maps a name to your public IP address. Call using the fully qualified domain name. Many routers support which is a free service like DynDNS for example. You can also download and install a small program on the host of the DRC. The program communicates with the No - IP or DynDNS servers on a regular basis. The server so you know what your current IP address and that map to your fully qualified domain name.

  http://www.no-IP.com/?utm_source=MSN&utm_medium=CPC&utm_term=no%20IP%20.com&utm_campaign=brand+MSN

  http://dyn.com/DNS/

• the WAN connection becomes too slow after you have configured the VPN (Site Site)

  Hello

  I have two branches connected via WAN (MPLS) connection using two 2921 routers.the connection is 2 M.

  I set up a VPN between these two sites, but after the connection has become very slow.

  y at - it something I can do to speed up the speed of connection.

  VPN proposals are:

  Proposals of the phase 1: 3DES, pre-shared,.

  Phase 2 proposals: esp-3des esp-sha-hmac

  I don't think that lower levels of security proposals will add a lot to the speed...

  Hi Marc,

  one thing you should definitely is a hardware encryption go if you do not already tht, it also reduces the load on your cpu

  You can try other things is play with mtu, according to your line mtu and what applications are mainly used. try setting the mtu of at least 60 odd bytes lower than the mtu and also sometimes server line recommended mtu settings like server many have obligation to mtu to 1300 or 1400, if that's not it can cause a lot of re transmissions, you can also try fragmentation before encryption

  http://www.Cisco.com/en/us/docs/interfaces_modules/services_modules/VSPA/configuration/guide/ivmvpnb.PDF

• After you have configured Anyconnect using the client of the wizard is unable to connect to Internet

  Hello

  I have a small Setup w/8.4 ASA - 5520. Outside goes to Internet, the inside is 172.17.0.0/16 network and management is 172.17.2.0/24. VPN IP pool is 172.17.8.0/24.

  After that I configured webvpn with the wizard, I have VPN into a fine, ping other IP switches and routers (ASA is running EIGRP and distributing its static route to the internet to its neighbors). I have Setup nat to allow for Internet access from the inside to the outside, use off interface as the translated source.

  After I VPN in, I am assigned a correct address for my pool VPN (172.17.8.21 for example). I can't ping or connect on the Internet however. Newspapers reveal nothing, I don't see any rejected packets. I can't reach the management either network. The management network is a switch that has all the ports of the management of the different switches, faders load, etc on this subject, but I can't access it.

  I wonder what type of NAT configuration, I have to do here and how to I'm to deny access to the Web interface and management, but nothing appears in newspapers despite debugging setup and open the firewall until completely bringing all traffic.

  The security level is 90 for the Interior and 0 to 100 outside management. The possibility of allowing equal security level interfaces pass traffic is selected. I got inside and the management to 100 before and it did not work with VPN.

  Please help, I do not have my config ASA handy ATM, but I will by hand in a few hours.

  I was wondering if anyone has recommendations on the use of NAT so I can get access, I need.

  Thanks in advance

  Patrick,

  Do not have access to an ASA myself so the commands below are not soundproof.

  But I guess if you're missing config NAT, it would be the document describing:

  https://supportforums.Cisco.com/docs/doc-11640

  To access the management, good show use some newspapers :-)

  show xlate det | I have IP_ADD (for source and destination IP)

  Show logg. I have IP_ADD (make sire logging is enabled for buffering on the level of information and to do for the source and destination)

  Marcin

• How can I keep old emails to download after you have configured the address

  I just install a professional e-mail address on thunderbird but don't need the 7000 + old emails to download from the server
  How can I avoid this?

  If it's gmail, visit their Web site and search for the function 'recent '.

  Otherwise, and I guess that it is IMAP, he's just doing what it is supposed to do; show you what is on the server. Your best choice is to go to the website of the provider of messaging, place messages you don't need to see their own records and not to subscribe to those folders in Thunderbird.

  If it's POP, a new account in Thunderbird does not know what you have seen before, so just of gets it everything. Beware, it will almost certainly move all messages from the server to the client, then don't start immediately remove things. The 'other files' technique described for IMAP should work here too, as POP sees no folders on the server other than the Inbox.

• Logic ruined after you have configured the controller Akai. Time Machine will fix it?

  So I am using Komplete Kontrol for over a year. Problems of cero. I have a new MPK261 AKAI and proceeded to set up in the logic, following the instructions on the AKAI website for this (http://www.akaipro.com/kb/article/1600).

  I don't know what the * happened but the logic went crazy after that... the buttons on the controller to make each window I opened just flash and pop up intermittently.

  I'm not really try know what happened (doubt I'll ever find and the AKAI people do not react), my guess is these AKAI placed somehow in conflict with the settings of Komplete Kontrol, and I have replace the file com.apple.logic.pro.cs from the library > Preferences, which also could have been she.

  So, I just want to ask if using Time Machine to settle things a few days back will correct this? I've never used a time Machine (I have defined daily backups, but never had to use before), so I don't know if it will work.

  Thank you!

  Before going to the road Time Machine... (which I do not know the answer anyway)

  Try this:

  With the logic does not--

  Remove the 10 logic preferences file AND the areas of shared control file.

  (In your case, simply remove the control surfaces pref)

  In the Finder, choose go > go to folder from the menu.

  Type ~/Library/Preferences in the field 'go to folder '. (Note :) Type exactly-> ~/Library/Preferences)

  Press the Go button.

  Delete the file com.apple.logic10.plist from the Preferences folder. Note that if you set custom shortcuts, it will reset to the default values. You can export your custom key as a preset before performing this step. See the user manual Pro Logic for more details on how to do it. If you are having problems with a with Logic Pro control surface.

  then delete the file com.apple.logic.pro.cs from the Preferences folder.

  Next time you start logic will be rebuilt the default surface control file.

• One of the virtual machine gets the APIPA address after you have configured with a static IP address, where the other VMS works very well with same vlan with static IP

  We have deployed 3 VMs with the same vlan where one virtual machine gets APIPA address, even after the configuration of the IP address manually.

  We do not have servers DHCP and other VMs 2 find with the same vlan

  No IP address is not used by another system and another IP address works

  Meanwhile, I just googled and got a God save the link that helped me in the question of fixing

  http://lyngtinh.blogspot.in/2011/12/how-to-disable-Autoconfiguration-IPv4.html

• After you have reinstalled windows how do I XP to recognize my programs on the hard drive

  After the computer told me that the rundll was missing I reinstalled XP home got all this

  dates, years SP now do I have to re - install my programs such as Word and Excel, or y at - it a way to get XP to search?

  There is, but it is not reinstall your old software.  The installation involves many parameters in the registry, copy of the files in folders systems, updating the start menu, etc etc.  I wish there was such a command, but I'm afraid that there is not.  I'm sorry.

  Good luck.

• Forums CWMS drop after you have entered the code meeting

  Hi all

  We have webex 2.6.1.45.B - AE, call out of work, but a drop after you have entered the code-meeting... Work of DTMF.

  may be, because: you are using a trial version of the Cisco WebEx meeting server which expires in 32 days. Buy licenses to host for your system to avoid the limitation of access host?

  or someone has an idea?

  Thank you very much!

  Hello

  This problem is caused by a bad configuration of the integration of CUCM with CWMS.

  Make sure you check you SIP Trunks and SIP configuration on CUCM routing model.

  Make sure that your points in routing SIP Trunk SIP of Point Application model.

  Make sure that the Partition configured in routing SIP model belongs to a CSS that is configured in the LoadBalancing SIP trunk under:

  1. change of itinerary calling search space

  2 outside dialogue see calling search space

  Also, refer to this post to understand why the model of routing SIP and Application Point SIP trunks are used: https://supportforums.cisco.com/discussion/12879351/cucm-and-cwms-call-routing

  In addition, this guide to the official reference documentation: http://www.cisco.com/c/en/us/td/docs/collaboration/CWMS/2_6/Planning_Guide/Planning_Guide/Planning_Guide_chapter_0101.html

  I hope this will help.

  -Dejan

• Configuration remote access VPN (IPSec) using FULL domain name

  Hi friends of Cisco,

  We have the DNS (only the internal IP) within our network, right now that we have configured VPN for remote access using public IP address and connect us with the same public IP address. I need help to use the domain name FULL rather than use public IP.

  Can you please provide the configuration for this.

  Feature: ASA 5520

  Type of configuration: IPSec

  Thank you

  Estel

  Hi Philippe,.

  You can use one of the free Web of DNS dynamic sites and configure ASA to dynamic DNS.

  Reference - http://www.cisco.com/en/US/docs/security/asa/asa84/configuration/guide/basic_ddns.html

  HTH,

  -Dieng

• The browser does not start after you have turned off and turned on the computer

  The browser does not start after you have turned off and turned on the computer. I tried to remove the program entirely (as well as personal preferences), to create a new account, install a different browser versions. All this has not helped. (I have Windows 7). Help, please! Every day I have to reinstall Firefox!

  Hello Nastena, try a clean reinstall, some Firefox issues can be resolved by performing a clean reinstall. This means that you Remove Firefox program files and then reinstall Firefox. Please follow these steps:

  Note: You can print these steps or consult them in another browser.

  1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
  2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
  3. Remove the Firefox installation folder, which is located in one of these locations, by default:
     • Windows:
       • C:\Program Files\Mozilla Firefox
       • C:\Program Files (x 86) \Mozilla Firefox
     • Mac: Delete Firefox in the Applications folder.
     • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
  4. Now, go ahead and reinstall Firefox:
     1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
     2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

  Please report back to see if this helped you!

  • Also check if your antivirus or other access security software (firewall, antispyware etc.) blocks firefox.

  Thank you

• What to do with the old user profile after you have created a new user profile

  original title: new user profile

  I was told my user profile is corrupted and create a new one, if I do this is it recommended to give up and delete the old? Or simply use the new profile for the intended use of the new?

  Hello

  They are similar, if not the same, as your question then use these methods to correct problems
  with the account or migrate to another (explained in the last link however you please, don't skip the)
  other measures to start).

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
  Mode has no default password (unless someone has changed the password so it should be available).

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
  has been known to cause this problem.

  Error message when you log on a Windows Vista-based or Windows 7 using computer a
  Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrrups you are TOAST.

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the Admin account hidden to lower your user account APPLY / OK then wear again to
  ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
  above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
  password (or two with the same password) use a test or difficulty to another.

  You can run the Admin account hidden from the prompt by if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
  always leave to an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.