After you have installed the latest updates it freezes and blue screens or?

Similar Questions

• Symantec Antivirus Corporate Edition "scan stopped by user" message after you have installed the latest update of Microsoft Security

  I run Symantec AntiVirus Corporate edition 2002 (build version 8.00.9374). The following problem, I discovered yesterday (May 13) when my analysis system and antivirus weekly update is scheduled: from an analysis of the system, the scan box opens and immediately stops, displays the message "scan stopped by user", followed the date & time and all control buttons are grayed out (not functional) with the exception of the close button.

  The only change that took place in my PC has been the download and installation of the most recent update Security for Windows XP (KB978542) which is described as: "critical Microsoft Security Bulletin MS10-030 - vulnerability in Outlook Express and Windows Mail could allow Code execution (978542) remotely.
  (url: http://www.microsoft.com/technet/security/bulletin/MS10-030.mspx)

  I tried to uninstall the security update; uninstall - reboot - reinstall - Live Update of the antivirus application. do a system restore point to return to the previous week - to no. AVAIL.

  I later identified this same, exact problem on 3 other computers running XP with sp 3 which just installed the latest update from security Microsoft.  I would be grateful to any suggestions on how to remedy this situation.  As a newbie to this forum, I would appreciate if others copy this assignment to other sections of the Symantec and Microsoft sites that could give him this attention important issue.

  Thank you

  Bryan Pepper - send me an email to * address email is removed from the privacy *.

  Installation not to run, such as Microsoft Security Essentials Package.

  Can I install Microsoft Security Essentials [or any other anti-virus/anti-spyware application] to clean my already infected computer?
  http://social.answers.Microsoft.com/forums/en-us/msescan/thread/87058857-D181-4019-a723-efd9a49d9275

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• After you have installed the latest updates of windows for Office 2007, I am unable to open any of my Office programs. I am running XP Pro SP3.

  I deleted the update that caused the problem; specifically, 972581. tried to run repair on the programs; Looks like a reinstallation does not work.
  Office 2003 is not affected.

  Try a direct download of 2 of them and read on the 3rd. http://www.Microsoft.com/downloads/details.aspx?FamilyId=d20004c5-dd01-459e-8120-5f127e20c085&displaylang=en

  Update of security for the viewer Microsoft Office Visio 2007 (KB973709)

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=EC802723-F2B2-400A-A24D-8D8D9092F9EA&displaylang=en

  Update of security for Microsoft Office System 2007 (KB974234)

  http://support.Microsoft.com/kb/972581

  Info on KB972581

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Read this if your error Code 646, including all positions and solutions offer to this thread link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/f3390e74-9961-4AAE-8a05-554c1a9cf1a2

  Read the info on the above link to error Code 646.

  With the compliments of: David_O - Support Engineer

  This problem occurs when the agent Windows Update Wups2.dll file is incorrectly registered in the registry. Because registry files that correspond to the Wups2.dll file are missing, update facilities have failed. There are two methods to resolve this issue, use method 1 first, and if it did not resolve your issue, go to method 2

  Method 1: Save the Windows Update files

  1. click Start and type notepad in the box start the search .

  2. click on Notepad in the programs list.

  3. copy the following commands, and then paste them into the opened Notepad window:

  REGSVR32 WUPS2. DLL/S
  REGSVR32 STINKS. DLL/S
  REGSVR32 WUAUENG. DLL/S
  REGSVR32 WUAPI. DLL/S
  REGSVR32 WUCLTUX. DLL/S
  REGSVR32 WUWEBV. DLL/S
  REGSVR32 JSCRIPT. DLL/S
  REGSVR32 MSXML3. DLL/S

  1. in Notepad, on the file menu, click on record under .

  2. in the list record under , click all files .

  3. in the file name box, type register.bat .

  4. save the Register.bat file to your desktop.

  5 right-click the Register.bat file, and then click run as administrator . Collapse this includes this image if you are prompted for an administrator password or a confirmation, type the password or click continue .

  6. try to install the updates again.

  Method 2: Download and install Windows Update agent

  For more information about how to download and install the latest Windows Update agent, click on the number below to view the article in the Microsoft Knowledge Base:

  949104

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Please rate me upward if you find my post helpful. Thank you!

• After you have installed the latest update to iTunes, I got an error message: iTunes is not installed correctly Error7

  Original title: iTunes

  I had iTunes running on Thursday passed on W8.1. When he downloaded the last version I received the message: iTunes not properly installed Error7 (Windows error 1114) with: rubtime Library Microsoft end ++. Run-time error. Program: C:\Program Files (X 86) \iTunes\iTunes exe. R6034 An application has made an attempt to load the C runtime incorrectly library. Support team of enforcement contact for more information. When I'm on it 1 time iI uninstalled & reinstalled. Same message.

  Always looking for help. I tried various suggestions does not.

  The answer on Apple Support that solved this for others said:

  "

  Go to control panel > add or remove programs (Win XP) or programs and features (latest)

  
  

  Remove all these elements in the following order:

  
  

  • iTunes
  • Apple Software Update
  • Apple Mobile Device Support (if this will not uninstall press on)
  • Hello
  • Apple application support

  
  

   

  
  

  Restart, download iTunes and then reinstall, or under an account with administrator rights, or right click on the downloaded Setup program and selecting 'run as administrator '.

  
  

   

  
  

  See also HT1925: removing and reinstalling iTunes for Windows XP or HT1923: removing and reinstalling iTunes for Windows Vista, Windows 7 or Windows 8. Some users must follow all the steps in the appropriate support document which includes a few deletions additional manual file and folder not listed above"

  
  

  You perform all of these steps? I see that you posted in this forum. You really need to post here.

  __________________________________________________________________________________________________
  Barb

  MVP Windows Entertainment and connected home

  My Blog - http://digitalmediaphile.com/

  Connected world Blog Reader Windows 8 App Barb-
  http://apps.Microsoft.com/Windows/en-us/app/barbs-connected-world-blog/02f35769-52bf-461C-b1d5-06e54a58d298

  Windows and Surface drive Windows 8 App community
  http://apps.Microsoft.com/Windows/en-us/app/Windows-and-surface-community/0abb150e-D287-47d4-837E-9fa51f485ad7

  Please mark as answer if that answers your question

• After you have installed the certificate update (9.3.2), I have an incompetent to swipe down my Notifications

  After you install the latest update (9.3.2), I am able not to swipe down from Notifications & cannot slide to Control Center.

  I tried to reset, checked the settings and still cannot get this fixed number.

  For any help or suggestion will be appreciated!

  Thank you for your time!

  Try a forced reboot. Hold down the home and Sleep/Wake buttons simultaneously for about 15-20 seconds , until the Apple logo appears. You won't lose anything.

  If a force restart does not help, try a system restore. First save your device via iTunes. Also import your photos on your computer and copy all the important data. Reconstruction of the support first test and test. If this does not help, you may need to restore as a new and reconfigure from scratch as the backup may be damaged. It is important to have your photos and your saved data separately from the backup. Here are the steps for a restoration:

  https://support.Apple.com/en-us/HT201252

• After you have installed the free updates for Vista Home Premium 64 bit, Windows will not start

  After that I installed the free updates to service pack 1, the system goes through 2 of the 3 steps, while it recharges, then the system does not boot?  To get the computer to work again, I need to run the repairer of Windows, which allows you to restore the system to an earlier point?  Does anyone have an idea how to fix this?

  Do your system restore, then:

  Click Start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  See you soon.

  Mick Murphy - Microsoft partner

• After you have installed the latest version of Kaspersky Anti-virus, I no longer wish to receive email.

  I can send emails, but I can't get everything and they do not get copied to my "sent" folder.
  I have two accounts (using the same installation of Thunderbird and the same IMAP server) and both have the same problem.
  Thunderbird is more sought my for my passwords and after a while I get a message that says only that the connection has expired.
  Before the connection times out, the text that appears on the bottom bar said current mail server features.
  On another thread, someone suggested you connecting to customer account Web screw and remove the message oldest undownloaded Inbox because it might be a problem with the e-mail address that blocks Thunderbird, but all my emails undownloaded were received after that the problem began to occur.

  I recently installed the latest version of Kaspersky Anti-Virus, so I suspect that it blocks the incoming connection. I tried to re - install Thunderbird to see if she could circumvent Kasperky or tell me what I need to do so that he could make an exception (or something like that). No luck.

  Kaspersky support services do not seem to be worth anything, so I don't think I'll get any assistance to their end.

  Any help here would be greatly appreciated,

  Simon

  I don't know how the traffic server scan works, but I don't know what heuristic analysis is. This is the review of the code and dumping something containing code that is normally used to the virus.

• Why do I get a message "driver conflict detected" after you have installed the latest driver.

  I got the impression ink levels display problems.  So, I decided to run the latest software to print and Scan doctor.  Of course, diagnostic tests detected a driver problem and displays a message "Driver conflict detected.  So, following the instructions, the driver has been uninstalled and new software has been installed by using the latest version of the driver full and another software installation.  After this has been done, diagnostic tests was performed again, guess what, same message.  The next timeI just installed the driver installation package.  The diagnosis was made again.  Guess what, same error.  Well, after a few hours trying to find another driver for a 64-bit computer to Windows 7 and looking for an uninstall program different, I gave up.  Oh, the other problem is repeated 'offline' messages on my wife, WIFI connection to the printer. No problem has been fixed.   Does anyone have a solution?

  Thank you-

  That solved the problem for the USB connected computer. The wireless computer works correctly.

  Thank you very much for the help.

• Cannot access the network after you have installed the Windows updates

  original title: Windows update and Acer Aspire M3201

  Hi, I have a problem with my Acer Aspire M3201, which has Windows Vista on it. The system has installed the Windows Update automatically, so I can't access the internet and home network more. So I restored the previous update windows, then I can get into the internet again. A week later the update windows again but this time somehow corrupted previous restoration, I cannot restore and can not enter in the internet. I bought Windows 7 to upgrade my Windows Vista computer. The upgrade went OK game, but it was also installed the updateautomatically, and I cannot yet access the internet web browser of screws, but the command, I can ping any web site as www.cisco.com. Please help me. Thank you.

  If you updated that could trigger it, you can do is to uninstall and avoid installing it by hiding the update in Windows Update.

  Click Start, type: see installed updates
  Press enter on your keyboard
  Look for the update in question, no it click on, then click on uninstall.

  Restart your computer

  Open Windows Update, select the update, right-click and click Hide

  See also: Troubleshoot network Windows 7 http://clkon.us/bJtkA0

• After you have installed the latest version of Mozilla, my Roboform toolbar is no longer available

  I have the latest version of Mozilla and the latest version of Roboform. RoboForm works fine in my Internet Explorer, but will not display the Roboform toolbar in Mozilla. I tried to uninstall Roboform via Control Panel and reinstall... same question. Please helpl

  You use the beta version of Firefox, which Roboform is not entirely consistent. You can switch to the final version of Firefox, which should support the Roboform. Download from www.getfirefox.com

• After you have installed the latest Windows updates, Lenovo T60 laptop running Vista takes 30 minutes to start

  I have Vista Home Premium installed on a Lenovo T60 laptop. The machine is
  3-4 years.

  Although the system has never been quick to start, after the latest Microsoft
  update has been downloaded and installed, it now takes about half an hour to start
  the system of cold starts and 20 minutes from the sleep position.
  It also takes a long extra time to get the Explorer running

  What happened during the update may cause this extra on drag
  performance? How can I change?

  I tried the system restore, but it would allow me to go back only to the point
  When the MS Update has been installed.

  Thank you.

  HR Sirois

  Is your system error free?

  Event Viewer reports

  1. normally, when an error occurs on your computer looking in Event Viewer should be your starting point to find a solution. More related system errors are recorded and get an exact copy of the relevant report is important. Unfortunately, is not easy to understand reports and most of the users computer need help with their interpretation. I have to say later interpretation.

  2 Event Viewer includes three main newspapers of Windows. Here's the Application, security, and system. For purposes of troubleshooting system is by far the most important.

  3. to access the system log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window select Windows and the system logs. Place the cursor on the system, right click and select filter current log. Check the front of the error and click OK and see you only reports errors. Click the Date and time column header to sort. You may need to click a second time to see the last report above.

  4. a tip for posting copies of error reports! Run Event Viewer and double-click the error you want to copy. Click the copy button to place a copy in the Clipboard and close Event Viewer. Now start your message and paste it into the body of the message. Make sure that it is the first dough right out of the event viewer.

  5. He cautioned against three types of reports, information, and reports errors. In most situations, it is the error reports that offer the best information but sometimes WARNING reports provide useful clues.

  6. all reports have stamps date and hour and when troubleshooting, it is important to focus on the latest reports. Reports of studies from the point when the computer is started, and then check if a similar report appeared in the previous session. If errors do not repeat investigation as to why they happen is wasted effort.

  7. in the individual reports the most important information is the event ID and Source such as these help when looking for help on the internet. The description is just as important and copy the exact text to use as search criteria greatly helps achieve better results when using Google. Not paraphrase descriptions when other people asking for help.

• After you have installed the latest Windows updates, my Bluetooth stopped working

  I installed the last set of updates to the window and it caused my Bluetooth to stop working.  Reinstalled drivers from the dell website and it still does not work. Fact a restore point and devices have started working again. Updates were the only changes. No other programs or updates installed.
  What updates do interfere.

  Dell E6530, Windows 7 64-bit, Intel core i5, office 10

  Original title: bluetooth

  Are you set for Important updates only (which is recommended)?  If not, was an updated device driver?  It is best not to let Windows Update process device drivers.
  If you cannot reduce it any other way, you can try to install the updates again one at a time.  I have not heard about recent blue tooth switn of the problems Windows updates recently.

• Wi - Fi Elitepad 900 died after you have installed the latest driver Atheros HP.

  The Wi - Fi on my 900 Elitepad (Win 8, 32-bit) works well in the past.  But recently, I am constantly Wi - Fi 'limited connection' and that 'no connection' emits intermittently.

  And I went to the download page of the HP driver, installed the last "Qualcomm AR6000 Driver Atheros Wireless LSN series" (SP61232, ver.3.7 of March 22).  After installation, the Wi - Fi connection goes dead.

  In the lower status bar, the Wi - Fi icon is always displayed with a red & white and does mean 'no networks detected'.

  In the section 'wireless devices' menu 'Settings of PC' Win 8, the Wi - Fi button disappeared altogther, even if she was still there before the update of the driver.

  In the "Network connections" window of Win 8, the Wi - Fi icon is displayed as 'active', but a better connection returns the message that "there could be a problem with the driver for the wireless adapter.

  In the "Device Manager", the Qualcomm Atheros AR6004 adapter shows that everything is normal and work, even if it is obviously not.

  For the 'ipconfig/all', the Wi - Fi section does not even appear in the result.

  I've uninstalled and reinstalled the old and new Wi - Fi drivers several times above, but Wi - Fi is still dead.

  Help, please.

  Problem solved!

  I had to uninstall all the drivers Atheros Wi - Fi in the Mode without failure Windows, restart, then CNettoyez in the normal Windows mode, restart, and then finally reinstall the latest driver in Mode Windows safe.

  Now the Wi - Fi is back running.  But I have to check if the Wi - Fi BOUNCING 'limited connection' or 'no connection' not coming back or not, with this latest HP driver.

  It must be one or more of the following applications installed that prevented the WiFi driver install correctly in the first place:

  The AVG antivirus,

  ZoneAlarm firewall,

  CNettoyez,

  Malwarbytes anti-malware.

• After you have installed the latest version, only a quarter of the page is visible in the window. How do I shrink to fit?

  I can use the view menu at the top and "Zoom Out" 4 to 5 times to be able to see the entire page, but when I go to another site or page it is up to a size that is too large to be displayed in the window. This is unacceptable and I need a solution or I have to use another browser.

  Hello, firefox 22 is now about the density of pixels you have upgraded to system in Control Panel > appearance > display. more information about this is available at http://windows.microsoft.com/en-us/windows7/make-the-text-on-your-screen-larger-or-smaller

  If you want to set the text size/pixel density in firefox is different that your system settings as it has been addressed in previous versions, enter about: config in the address bar of firefox (confirmed the message information where it appears) and search for the preference named layout.css.devPixelsPerPx. Double-click it and change its value to 1.0 (or any zoom factor that suits your needs; -1.0 is the default and will respect the parameters of the system).

• After you have installed the latest Pantone color library in photoshop, some colors are inaccessible

  I try to refer to a specific Pantone color in Photoshop. I want to use the color library browser, so that I can easily get an overview of my chosen color variants. The color, I'm working with is not available in the original Pantone Coated color book provided with my version of Photoshop. So I downloaded and installed the Pantone color Manager and checked the color I want IS identified in the book lying in the Pantone color Manager. Great! I saved the book of color as a .acb file and installed in Photoshop. But I can not yet select some colors. They exist in Pantone color Manager, but they are not searchable from within Photoshop. Very strange!

  Here are the steps I followed to bring the book of the color in Photoshop:

  1. launch Pantone Color Manager

  2. Select the formula Guide - coated color book

  3. perform a search for "2128" and ensure that color exists.

  4. choose Save as... and save the file with a .acb (Adobe color book) file. I named it "PANTONE + Solid Coated - V3.acb.

  5. exit Photoshop

  6 copy the book of color in books color file in Photoshop (/ Applications / Adobe Photoshop CC 2015/Presets/color books).

  7. start Photoshop.

  8. open the color picker and click the button "color libraries".

  9. choose my new book of color in the menu ("PANTONE + Solid Coated-V3')

  10 type '2128': not found (Photoshop shows me 212c instead).

  I scrolled the book color in Photoshop - color isn't here!

  What I am doing wrong?

  You want to export the color book. Then it must meet 2-1-2-8 in the Photoshop color picker and I would choose Lab as the color model during export.

  

  Gene