After you have installed the Rosetta Stone, the Windows Control Panel has stopped working

Similar Questions

• Windows Control Panel has stopped working and cannot read the CD

  Original title: windows control panel has stopped working

  When I went to install my Rosetta Stone program it showed Windows has stopped working and then installed the program and when I put the cd in my computer saids windows control panel has stopped working and cannot read the cd

  Hello

  You say "Control Panel has stopped working" or "Windows Explorer has stopped working"?

  Follow the steps mentioned in the article below and check if that helps:

  Start the computer in a clean boot state

  Start your computer in a clean boot state, and check if your computer is able to read the CD. Start your computer in a clean boot state helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• After you have installed the Windows my computer application updates a password log when there not before.

  original title: Windows password

  After you install an update from Windows, my PC isasking for password.  I have never entered a password before and don't remember having created a.  A tech support person suggested that perhaps a virus.  How will I know who he is and how to solve?  Thank you.

  Hello

  Please only post the same question once in these forums

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/after-installing-a-Windows-Update-my-PC-now-asking/8d1a2e4a-A403-45dc-a5ae-63c212ef83eb?page=1&TM=1306787622421#footer

  ___________________________________________________________

  and if Malware is not the problem, it's the only advice that microsoft can provide you about passwords

  It is available on you microsoft information help on problems with passwords

  http://support.Microsoft.com/kb/940765

  If you are unable to connect to Windows 7 or Windows Vista, you can use the Windows Vista System Restore feature, or the Windows 7 system restore feature.

  You may be unable to connect to Windows Vista or Windows 7 in the following scenarios:

  • Scenario 1: You recently set a new password for the protected administrator account. However, you don't remember the password.
  • Scenario 2: You type the correct password. However, Windows Vista or Windows 7 does not accept the password because the system is damaged.
  • Scenario 3: You delete a protected administrator account. Now, you cannot connect to another administrator account.
  • Scenario 4: You change an administrator account protected with a standard user account. Now, you cannot connect to another administrator account.

  ____________________________________________________________________

  except that we cannot help you

  read this microsoft's policy NOT to provide assistance to crack passwords when they are lost or forgotten:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/keeping-passwords-secure-Microsoft-policy-on/a5839e41-b80e-48c9-9d46-414bc8a8d9d4

• Cannot access the network after you have installed the Windows updates

  original title: Windows update and Acer Aspire M3201

  Hi, I have a problem with my Acer Aspire M3201, which has Windows Vista on it. The system has installed the Windows Update automatically, so I can't access the internet and home network more. So I restored the previous update windows, then I can get into the internet again. A week later the update windows again but this time somehow corrupted previous restoration, I cannot restore and can not enter in the internet. I bought Windows 7 to upgrade my Windows Vista computer. The upgrade went OK game, but it was also installed the updateautomatically, and I cannot yet access the internet web browser of screws, but the command, I can ping any web site as www.cisco.com. Please help me. Thank you.

  If you updated that could trigger it, you can do is to uninstall and avoid installing it by hiding the update in Windows Update.

  Click Start, type: see installed updates
  Press enter on your keyboard
  Look for the update in question, no it click on, then click on uninstall.

  Restart your computer

  Open Windows Update, select the update, right-click and click Hide

  See also: Troubleshoot network Windows 7 http://clkon.us/bJtkA0

• After you have installed the Windows upgrade free 10 can you easily return Windows 7?

  I have to reinstall my applications and hardware drivers? Otherwise it is a matter of circuit breaker.

  Can I uninstall Windows 10 if I do not like it?

  See the following: how: go back to an earlier version of Windows from Windows 10

  Backing up your computer:
  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  Also check:

  How to: build 10 tips before installing the latest version of Windows 10

  How to: 10 things to do if the Windows 10 install fails.

  Once you have installed these important updates and followed the required steps, you should be ready to receive your free Windows 10 update this summer.

• Computer freezes Vista, get the error of the audio control panel has stopped working

  my computer is running windows vista Home premium and after it starts and connects to the home screen, it immediately freezes and it says the audio control panel stopped working and the mouse and the keyboard does not work

  Reference Dell inspiron 5305 windows edition running Home premium

  Hello

  I suggest you to follow these steps and check if that helps:

  Method 1:

  Start the computer in safe mode and check if the same problem occurs:

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 2:

  Try to perform the clean boot and check if it helps:

  http://support.Microsoft.com/kb/929135

  NOTE: When you are finished troubleshooting, make sure that restore you the computer mode normal startup such as suggested in step 7 of the above article.

  It will be useful.

• After you have installed the Windows updates, my computer does not recognize that there is a disc in the DVD - ROM thing

  I had this problem for weeks and only recently someone told me that it is perhaps for this reason.
  I tried several things to fix, and one of those who created an error where when I clicked on drive E in Windows Explorer, it looks like:

  E:\ application not found

  So, in the end, I wiped my computer and everything on it and rebooted again.

  IT TOOK FOUR HOURS.

  So, I've set up the computer as I did when I got it 2 years ago, and everything was fine. I could insert a disc, it reads that and I was able to install my game, no problems.

  Now, I have reset everything up, and there are more than 2000 updates to update installed. So I did.

  SO NOW, after all this, which took another TWO HOURS - he does not all disks again.

  I play the Sims 3 - fiercely - and so I tried to re - install all my expansion packs, but it does not now.

  I DON'T want to make that whole process again and install all my games before updating Windows, because I believe, even if I did that, once I've updated, I can't play the game, because my laptop does not recognize that the game disc is there.

  Help, please.

  I spent so much money on these games, and I love them! I don't have the money to buy a new computer.

  I have a Lenovo Ideapad

  Core i5 Intel

  https://support.Microsoft.com/en-AU/KB/314060/en-us

  Your CD-ROM or DVD drive is not recognized by Windows or other programs

  Discussion here:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-hardware/Windows-8-DVD-RW-application-not-found/d68931e4-82f1-4D04-830d-49478ead5dd8

  Your AutoPlay doesn't work maybe not properly.

• Problem has been detected and windows has been shutdown error STOP: 0x0000008E. Get the memory dump after you have installed the trial version of MS Project 2010.__space.

  Original title: problem has been detected and windows has been shut down. Get the memory dump after you have installed the trial version of MS Project 2010.__space.

  Computer Message: Check if you have enough disk space. If a driver is identified in the stop message, disable the driver or check with the manufacturer for driver updates. Try changing video cards.

  Check with your suppliers of material, updates the BIOS. Disable the BIOS memory options such as implementing caching or shading. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to start advance startup options, and then select Safe mode.

  Technical information: * STOP: 0x0000008E (0xC0000005, 0x8054556C, 0xADB78A98, 0x00000000)

  Beginning physical memory dump

  Total physical memory dump. Contact technical support for further assistance group.

  Hi fernandomventura,

  Step 1: Disconnect all external devices (printers, scanner, USB (universal serial bus) readers, etc...) Except the keyboard and mouse and then start.

  If this solves the problem, then add back devices at a time until you discover the piece of hardware causing the issue.  Then get any drivers\software update for the device.

  Step 2: Follow the steps mentioned in the articles below which deals with a similar question

   

  General troubleshooting for an error message that you receive randomly in Windows XP: "Stop 0x0000008E"-restore the system to achieve ".

  http://support.Microsoft.com/kb/945658/

  You receive a random "0x0000008E" error message on a blue screen in Windows XP

  http://support.Microsoft.com/kb/827663

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• After you have installed the Realtek drivers, I get code 10 error and cannot start sound.

  original title: help with my sound please

  After you have installed the realtek driver it says code error 10 can't start sound...

  also I can't find the button sound.video and games on the Device Manager heres the message in Event Viewer:

  Log name: System

  Source: PlugPlayManager

  Date: 17/05/2012-18:50:27

  Event ID: 12

  Task category: no

  Level: error

  Keywords: Classic

  User: n/a

  : My computer

  Description:

  The device ' in Build Conexant Type 2 modem "(HDAUDIO\FUNC_02 & VEN_14F1 & DEV_2C06 & SUBSYS_10250126 & REV_1000\4 & 37d33e44 & 0 & 0102) disappeared from the system without first be prepared for removal.

  The event XML:

   

     

      12

      2

      0

      0 x 80000000000000

     

      435

      System

      badimo-PC

     

   

   

      Modem Conexant - in the generation Type 2

      HDAUDIO\FUNC_02 & VEN_14F1 & DEV_2C06 & SUBSYS_10250126 & REV_1000\4 & 37d33e44 & 0 & 0102

      00000000

   

  Hello I want to,

  The problem you describe looks like you are maybe install the wrong driver for your sound card.
  Have you checked that the driver is for your specific device?
  If you look in your system's Device Manager, is there a yellow exclamation next to the audio controller?
  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Device-Manager
  If so, this seems to indicate that the drivers installed are not good for your sound card. Usually if you double-click the device in Device Manager, it will say something in the sense of "Device cannot start".
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• After you have installed the ripple 0.9.4.1 I can't find a way laucnhing it

  After you have installed the ripple 0.9.4.1 I can't find a way laucnhing, there is no program menu icons, not on desctop... nowhere.

  What is the way of how correct installation?

  I installed it on the D drive instead of c... but it's okay

  PS. anyone can fix version on the main site, it says 0.9.1 but actual installed version is 0.9.4.1, it confuses everything team.

  Open chrome.

  In Explorer, navigate to:

  C:\Program Motion\Ripple 0.9.4.1\ search

  Drag ripple_ui.crx chrome.

  Basically, see here:

  https://bdsc.webapps.BlackBerry.com/HTML5/documentation/ww_getting_started/Use_the_Ripple_emulator_C...

• HP 8600 printer range is found on the network after you have installed the Dymo printer for processing of credit cards

  HP 8600 printer range is found on the network after you have installed the Dymo 450 Turbo printer for processing of credit cards

  Hello Christina,

  1. What is the IP (Internet Protocol) address, the subnet and default gateway of the printer?

  2 have you tried to Ping to the IP address of the printer?

  Reset the printer can help get the problem solved.

  Perform the steps mentioned below to get the address of IP(Internet Protocol), subnet address, and default gateway.

  a: Type CMD in the search box start and press ENTER.

  b: now, type Ipconfig/all and press ENTER.

  Proceed as for Ping to the IP address of the printer.

  a: Type CMD in the search box start and press ENTER.

  b: type PING (IP address of the printer) , and then press ENTER.

  Reset the printing system:
  a: Go to System Preferences > Print & Fax
  b: Right (or control), click inside the box that lists your printers and select Reset Printing System.

  WARNING- This will remove ALL your printers!
  c: Select the sign more to add a printer. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

  Click on the link mentioned below as reference.

  http://Windows.Microsoft.com/en-in/Windows7/install-a-printer-on-a-home-network

  Note: "Check the title that reads" set up a network printer "

  Answer please if you have any questions.

• I bought Photoshop CC 2015 creative thinking Cloud before running the trial version of my computer. After you have installed the creative cloud, the box with the number of days remaining still apears. How can I proceed?

  I bought Photoshop CC 2015 creative thinking Cloud before running the trial version of my computer. After you have installed the creative cloud, the box with the number of days remaining still apears. How can I proceed?

  Check your account indicates the subscriptions that you expect (and that the adobe, used in the next step id is correct) by logging in here and checking the status of your subscription, https://www.adobe.com/account.html

  then, if it's current, disconnect and then back to your client application using the adobe with the link above in cc id: http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

  If this fails, CC help | Applications creative Cloud back to update evaluation Mode to 2015 CC

• How to fix the windows live mail has stopped working a problem caused the program to stop working correctly windows will close the program and notify you if a solution is available

  In the Middle looking emails from this error appears.  Windows live mail has stopped working a problem caused the program blocking works windows will close the program and notify you if a solution is available

  Hello

  1. do you remember make changes to your computer before this problem?

  Try to start the computer in a clean boot and check if it helps: How to troubleshoot a problem by performing a clean Windows Vista or Windows 7 boot http://support.microsoft.com/kb/929135

  Note: when you are finished troubleshooting, follow step 7 to start the computer in normal startup.

  If the boot fails, you can post your questions about Windows Live Solution Center by clicking on this link: http://windowslivehelp.com/product.aspx?productid=15

• "The Windows Task Manager has stopped working" the INSTANT Task Manager opens... process of safe mode does nothing.

  I am running windows 7 64 bit and have encountered a problem. Whenever I have open tasks, any way Manager (msconfig, cntrl shift escape, Ctrl alt del, etc.), task manager opens and white and displays "Windows Task Manager has stopped working". I am increasingly frustrated with the problem. I tried booting in safe mode AND clean boot, but the problem persists. On top of that, the system restore fails whenever I'm trying to do.

  Could you please help me get running again the Task Manager?

  Do you feel the behavior if you log on with a different user account?

  Maybe, try to rename a HKEY_CURRENT_USER\Software\Microsoft\Windows NT\CurrentVersion\TaskManager to for example a HKEY_CURRENT_USER\Software\Microsoft\Windows NT\CurrentVersion\TaskManager.OLD in the registry. Then try to start the Task Manager again.

• After you have installed the free updates for Vista Home Premium 64 bit, Windows will not start

  After that I installed the free updates to service pack 1, the system goes through 2 of the 3 steps, while it recharges, then the system does not boot?  To get the computer to work again, I need to run the repairer of Windows, which allows you to restore the system to an earlier point?  Does anyone have an idea how to fix this?

  Do your system restore, then:

  Click Start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  See you soon.

  Mick Murphy - Microsoft partner