After you have installed the Windows my computer application updates a password log when there not before.

Similar Questions

• Cannot access the network after you have installed the Windows updates

  original title: Windows update and Acer Aspire M3201

  Hi, I have a problem with my Acer Aspire M3201, which has Windows Vista on it. The system has installed the Windows Update automatically, so I can't access the internet and home network more. So I restored the previous update windows, then I can get into the internet again. A week later the update windows again but this time somehow corrupted previous restoration, I cannot restore and can not enter in the internet. I bought Windows 7 to upgrade my Windows Vista computer. The upgrade went OK game, but it was also installed the updateautomatically, and I cannot yet access the internet web browser of screws, but the command, I can ping any web site as www.cisco.com. Please help me. Thank you.

  If you updated that could trigger it, you can do is to uninstall and avoid installing it by hiding the update in Windows Update.

  Click Start, type: see installed updates
  Press enter on your keyboard
  Look for the update in question, no it click on, then click on uninstall.

  Restart your computer

  Open Windows Update, select the update, right-click and click Hide

  See also: Troubleshoot network Windows 7 http://clkon.us/bJtkA0

• After you have installed the Windows upgrade free 10 can you easily return Windows 7?

  I have to reinstall my applications and hardware drivers? Otherwise it is a matter of circuit breaker.

  Can I uninstall Windows 10 if I do not like it?

  See the following: how: go back to an earlier version of Windows from Windows 10

  Backing up your computer:
  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  Also check:

  How to: build 10 tips before installing the latest version of Windows 10

  How to: 10 things to do if the Windows 10 install fails.

  Once you have installed these important updates and followed the required steps, you should be ready to receive your free Windows 10 update this summer.

• After you have installed the Windows updates, my computer does not recognize that there is a disc in the DVD - ROM thing

  I had this problem for weeks and only recently someone told me that it is perhaps for this reason.
  I tried several things to fix, and one of those who created an error where when I clicked on drive E in Windows Explorer, it looks like:

  E:\ application not found

  So, in the end, I wiped my computer and everything on it and rebooted again.

  IT TOOK FOUR HOURS.

  So, I've set up the computer as I did when I got it 2 years ago, and everything was fine. I could insert a disc, it reads that and I was able to install my game, no problems.

  Now, I have reset everything up, and there are more than 2000 updates to update installed. So I did.

  SO NOW, after all this, which took another TWO HOURS - he does not all disks again.

  I play the Sims 3 - fiercely - and so I tried to re - install all my expansion packs, but it does not now.

  I DON'T want to make that whole process again and install all my games before updating Windows, because I believe, even if I did that, once I've updated, I can't play the game, because my laptop does not recognize that the game disc is there.

  Help, please.

  I spent so much money on these games, and I love them! I don't have the money to buy a new computer.

  I have a Lenovo Ideapad

  Core i5 Intel

  https://support.Microsoft.com/en-AU/KB/314060/en-us

  Your CD-ROM or DVD drive is not recognized by Windows or other programs

  Discussion here:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-hardware/Windows-8-DVD-RW-application-not-found/d68931e4-82f1-4D04-830d-49478ead5dd8

  Your AutoPlay doesn't work maybe not properly.

• Problem has been detected and windows has been shutdown error STOP: 0x0000008E. Get the memory dump after you have installed the trial version of MS Project 2010.__space.

  Original title: problem has been detected and windows has been shut down. Get the memory dump after you have installed the trial version of MS Project 2010.__space.

  Computer Message: Check if you have enough disk space. If a driver is identified in the stop message, disable the driver or check with the manufacturer for driver updates. Try changing video cards.

  Check with your suppliers of material, updates the BIOS. Disable the BIOS memory options such as implementing caching or shading. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to start advance startup options, and then select Safe mode.

  Technical information: * STOP: 0x0000008E (0xC0000005, 0x8054556C, 0xADB78A98, 0x00000000)

  Beginning physical memory dump

  Total physical memory dump. Contact technical support for further assistance group.

  Hi fernandomventura,

  Step 1: Disconnect all external devices (printers, scanner, USB (universal serial bus) readers, etc...) Except the keyboard and mouse and then start.

  If this solves the problem, then add back devices at a time until you discover the piece of hardware causing the issue.  Then get any drivers\software update for the device.

  Step 2: Follow the steps mentioned in the articles below which deals with a similar question

   

  General troubleshooting for an error message that you receive randomly in Windows XP: "Stop 0x0000008E"-restore the system to achieve ".

  http://support.Microsoft.com/kb/945658/

  You receive a random "0x0000008E" error message on a blue screen in Windows XP

  http://support.Microsoft.com/kb/827663

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I bought Photoshop CC 2015 creative thinking Cloud before running the trial version of my computer. After you have installed the creative cloud, the box with the number of days remaining still apears. How can I proceed?

  I bought Photoshop CC 2015 creative thinking Cloud before running the trial version of my computer. After you have installed the creative cloud, the box with the number of days remaining still apears. How can I proceed?

  Check your account indicates the subscriptions that you expect (and that the adobe, used in the next step id is correct) by logging in here and checking the status of your subscription, https://www.adobe.com/account.html

  then, if it's current, disconnect and then back to your client application using the adobe with the link above in cc id: http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

  If this fails, CC help | Applications creative Cloud back to update evaluation Mode to 2015 CC

• After you have installed the Realtek drivers, I get code 10 error and cannot start sound.

  original title: help with my sound please

  After you have installed the realtek driver it says code error 10 can't start sound...

  also I can't find the button sound.video and games on the Device Manager heres the message in Event Viewer:

  Log name: System

  Source: PlugPlayManager

  Date: 17/05/2012-18:50:27

  Event ID: 12

  Task category: no

  Level: error

  Keywords: Classic

  User: n/a

  : My computer

  Description:

  The device ' in Build Conexant Type 2 modem "(HDAUDIO\FUNC_02 & VEN_14F1 & DEV_2C06 & SUBSYS_10250126 & REV_1000\4 & 37d33e44 & 0 & 0102) disappeared from the system without first be prepared for removal.

  The event XML:

   

     

      12

      2

      0

      0 x 80000000000000

     

      435

      System

      badimo-PC

     

   

   

      Modem Conexant - in the generation Type 2

      HDAUDIO\FUNC_02 & VEN_14F1 & DEV_2C06 & SUBSYS_10250126 & REV_1000\4 & 37d33e44 & 0 & 0102

      00000000

   

  Hello I want to,

  The problem you describe looks like you are maybe install the wrong driver for your sound card.
  Have you checked that the driver is for your specific device?
  If you look in your system's Device Manager, is there a yellow exclamation next to the audio controller?
  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Device-Manager
  If so, this seems to indicate that the drivers installed are not good for your sound card. Usually if you double-click the device in Device Manager, it will say something in the sense of "Device cannot start".
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• HP 8600 printer range is found on the network after you have installed the Dymo printer for processing of credit cards

  HP 8600 printer range is found on the network after you have installed the Dymo 450 Turbo printer for processing of credit cards

  Hello Christina,

  1. What is the IP (Internet Protocol) address, the subnet and default gateway of the printer?

  2 have you tried to Ping to the IP address of the printer?

  Reset the printer can help get the problem solved.

  Perform the steps mentioned below to get the address of IP(Internet Protocol), subnet address, and default gateway.

  a: Type CMD in the search box start and press ENTER.

  b: now, type Ipconfig/all and press ENTER.

  Proceed as for Ping to the IP address of the printer.

  a: Type CMD in the search box start and press ENTER.

  b: type PING (IP address of the printer) , and then press ENTER.

  Reset the printing system:
  a: Go to System Preferences > Print & Fax
  b: Right (or control), click inside the box that lists your printers and select Reset Printing System.

  WARNING- This will remove ALL your printers!
  c: Select the sign more to add a printer. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

  Click on the link mentioned below as reference.

  http://Windows.Microsoft.com/en-in/Windows7/install-a-printer-on-a-home-network

  Note: "Check the title that reads" set up a network printer "

  Answer please if you have any questions.

• After you have installed the ripple 0.9.4.1 I can't find a way laucnhing it

  After you have installed the ripple 0.9.4.1 I can't find a way laucnhing, there is no program menu icons, not on desctop... nowhere.

  What is the way of how correct installation?

  I installed it on the D drive instead of c... but it's okay

  PS. anyone can fix version on the main site, it says 0.9.1 but actual installed version is 0.9.4.1, it confuses everything team.

  Open chrome.

  In Explorer, navigate to:

  C:\Program Motion\Ripple 0.9.4.1\ search

  Drag ripple_ui.crx chrome.

  Basically, see here:

  https://bdsc.webapps.BlackBerry.com/HTML5/documentation/ww_getting_started/Use_the_Ripple_emulator_C...

• problem with access to the image data after you have installed latest windows

  Hi, my name s mayur, I got the problem when I open my photos data, actuly I have a computer laptop sony vaio there and I m a photographer so usually I saved my data in my vista drive was slove, so I upgraded mwan Formate c drive and install windows 7 in there then when I cheack my image data in f drive I cant able to see the thuumbs when I open it in the windows image viewer He told me i dnt have the permission to access

  I did this solutions

  I changed my user to administrator - has not worked
  I changed the security settings and gives full control to user - does not work
  I've changed owner ship - does not work, I reinstalled vista - not worked
  I used hodden administrator - has not worked
  I have attached the HDD in the pc of windows genuen - has not worked
  I opened my hard drive under linux and not worked

  I am a hardware engineer also so can someone tell me what will be the reson when I cheak the propertese folder there are a few user (s16561613) with red qustion mark in the authenticated user, my laptop has a genuien windows and now I have installed the windows is not genuine and I dnt have the original windows. so is this problem related to the license... or is the problem of pricing to someone please help me... the security and

  Hello

  There will not be any support for a pirated copy of Windows. I suggest you install a genuine Windows 7 on the computer and test the issue. If you face the same problem let us know so that we can help you further.

  Reference:

  Windows Genuine

  http://Windows.Microsoft.com/en-us/Windows/genuine

• After you have installed the free updates for Vista Home Premium 64 bit, Windows will not start

  After that I installed the free updates to service pack 1, the system goes through 2 of the 3 steps, while it recharges, then the system does not boot?  To get the computer to work again, I need to run the repairer of Windows, which allows you to restore the system to an earlier point?  Does anyone have an idea how to fix this?

  Do your system restore, then:

  Click Start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  See you soon.

  Mick Murphy - Microsoft partner

• ORA-01102: cannot mount database in EXCLUSIVE mode in AIX after you have installed the database using dbca

  Hello!

  I have v7 IBM AIX and cluster HACMP set up two identical nodes included

  I have a head node after the installation of database using dbca I got error with the message:

  ORA-01102: cannot mount database in EXCLUSIVE mode

  Database cannot mount)

  Here is the information from the alert log:

  MON may 25 18:00:07 2015

  Starting ORACLE instance (normal)

  LICENSE_MAX_SESSION = 0

  LICENSE_SESSIONS_WARNING = 0

  SNA system picked latch-free 3

  With the help of LOG_ARCHIVE_DEST_1 parameter value by default as USE_DB_RECOVERY_FILE_DEST

  Autotune undo retention is enabled.

  IMODE = BR

  ILAT = 84

  LICENSE_MAX_USERS = 0

  SYS audit is disabled

  Commissioning:

  Oracle Database 11 g Enterprise Edition Release 11.2.0.3.0 - 64 bit Production

  With the options of partitioning, OLAP, Data Mining and Real Application Testing.

  ORACLE_HOME = /u01/app/oracle/product/11.2.0/dbhome_1/

  System name: nodename

  Name of the node: nodename

  Version: 1

  Version: 7

  Machine: 0003F6E5D600

  Using the settings in /u01/app/oracle/product/11.2.0/dbhome_1/dbs/spfiletestdb.ora side Server spfile

  Parameters of the system with default values:

  process = 500

  sessions = 772

  = 18G memory_target

  control_files = "/ ctl1/oradata/testdb/control01.ctl".

  control_files = "/ ctl2/oradata/testdb/control02.ctl".

  control_files = "/ ctl3/oradata/testdb/control03.ctl".

  DB_BLOCK_SIZE = 8192

  compatible = "11.2.0.0.0."

  db_recovery_file_dest = ' / backup/fra.

  db_recovery_file_dest_size = 100G

  undo_tablespace = 'UNDOTBS1.

  Remote_login_passwordfile = "EXCLUSIVE."

  db_domain = «»

  dispatchers = "(PROTOCOL=TCP) (SERVICE = testdbXDB)" "

  audit_file_dest = ' / u01/app/oracle/admin/testdb/adump.

  AUDIT_TRAIL = 'DB '.

  db_name = 'testdb '.

  open_cursors = 300

  diagnostic_dest = ' / u01/app/oracle '.

  MON may 25 18:00:08 2015

  PMON started with pid = 2, OS id = 14418020

  MON may 25 18:00:08 2015

  PSP0 started with pid = 3, OS id = 17891420

  MON may 25 18:00:09 2015

  VKTM started with pid = 4, OS id = 14090348 high priority

  VKTM clocked at (10) precision of milliseconds with DBRM quantum (100) ms

  MON may 25 18:00:09 2015

  GEN0 started with pid = 5, OS id = 9109714

  MON may 25 18:00:09 2015

  DIAG started with pid = 6, OS id = 16449704

  MON may 25 18:00:09 2015

  DBRM started with pid = 7, OS id = 17104928

  MON may 25 18:00:10 2015

  DIA0 started with pid = 8, OS id = 13303950

  MON may 25 18:00:10 2015

  MA started with pid = 9, OS id = 12517522

  MON may 25 18:00:10 2015

  DBW0 started with pid = 10, OS id = 11993232

  MON may 25 18:00:10 2015

  LGWR started with pid = 11, OS id = 15401010

  MON may 25 18:00:10 2015

  CKPT started with pid = 12, OS id = 6619318

  MON may 25 18:00:10 2015

  SMON started with pid = 13, OS id = 16515222

  MON may 25 18:00:10 2015

  RECCE has started with pid = 14, OS id = 13172906

  MON may 25 18:00:10 2015

  MMON started with pid = 15, OS id = 15794324

  commissioning 1 dispatcher (s) for '(ADDRESS =(PARTIAL=YES) (PROTOCOL = TCP))' network address...

  MON may 25 18:00:10 2015

  MMNL started with pid = 16, OS id = 18546742

  commissioning or shared server 1...

  Environment ORACLE_BASE = / u01/app/oracle /.

  MON may 25 18:00:11 2015

  ALTER DATABASE MOUNT

  sculkget: failed to lock /u01/app/oracle/product/11.2.0/dbhome_1//dbs/lkTESTDB exclusive

  sculkget: lock held by PID: 3670226

  ORA-09968: cannot lock file

  IBM AIX RISC System/6000 error: 13: permission denied

  Additional information: 3670226

  ORA-1102 marked during: ALTER DATABASE MOUNT...

  But if I install the darabase even dbca on node secondary, all installed and executed successfully.

  But in the two nodes even permissions, user oracle and oinstall group ID identified the same and $ORACLE_BASE and $ORACLE_HOME user owner oracle and oinstall user group.

  A someone has encountered this problem and solved?

  Thanks in advance!

  Hello

  you are using IBM AIX PowerHA for your database (active/passive) configuration. then you just install the binaries 'once' on one of the nodes. then coordinate with your operating system administrator to configure the fail the test scenarios.

  for your question. before you start the database, make sure that there are no "orphaned" oracle process using the UNIX grep command:

  $ ps - ef | grep ora

  Kill the oracle of the hanging of the process to release the lock on the database file handle:

  $ kill-9

  I hope this helps.

  Kind regards

• After you have installed the latest updates it freezes and blue screens or?

  I have installed the latest updates and it did not even to the part where he set up after a reboot.  Now I'm stuck in safe mode and no alternative.  Updates are not listed in the list of installed updates and I tried to do a repair of the system from the installation cd and I'm tempted to do a restore system since the day before two weeks before updates.  Nothing works.  Any suggestions will help!  I'd hate to reinstall because I have no backup support.

  Update: the event log has nothing in it to try to start safe mode.  If the problem occurs before the event log service was started.  I tried to uncheck all part 3 applications and services in msconfig.  I'm out of ideas.  Someone has everything?

  I said that I tried to do a restore from the day before and up to two weeks before the updates.  I actually found the problem and he had nothing to do with updates.  My crapped out video card and ATI Control Center was freezing at startup.  So I took out the video card and it starts perfectly.  Thanks for the help anyway.

• After you have installed the computer crashes security update.

  Original title: security update blocks the computer

  Tuesday, July 10, Microsoft has pushed through an update to the security features.  I have installed McAfee and Windows Defender is disabled.  Since the works of modernization, the keyboard and the mouse will freeze after a variable period of inactivity sometimes as short as 2 hours or as long as 12 hours.  The computer must be turned off at the switch and restarted.  The restart is problematic and often takes several attempts.  The last series of attempts took more than 90 minutes; so this question.  Sometimes on restart says explore "Cable is not connected to the"connecting to LAN"network adapter", but we all know that it is.  Random reboots solved this problem.  The operating system is Windows Vista Home Premium.  I am at a loss.  Disable for everything to run as it did before July 10 to date?

  Hello

  If you have McAfee installed on your computer, the time protection real Windows Defender will automatically close as McAfee already brings you this service.

  Method 1:

  Step 1: Check in safe mode.

   

   

  You can also check if the problem persists in safe mode.

  Reference:

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Now step 2.

  Step 2: Perform the clean boot and check.

   

  To help resolve the error message, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  
  Please note:  After troubleshooting, be sure to start your computer in normal mode by following step 7.

  Method 2:

   

  Perform the system restore.

   

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Method 3:

  Run an analysis of auditor of system files on your computer and check for the issue.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Check the updates are installed?

  http://Windows.Microsoft.com/en-us/Windows-Vista/see-which-Windows-updates-are-installed

  Check the event viewer for the detailed error message.

  http://msdn.Microsoft.com/en-us/library/aa189531 (v = office. 10) .aspx

  http://TechNet.Microsoft.com/en-us/library/aa997769 (v = exchg.65) .aspx

  Hope the above information is helpful.

• After you have installed the latest Windows updates, Lenovo T60 laptop running Vista takes 30 minutes to start

  I have Vista Home Premium installed on a Lenovo T60 laptop. The machine is
  3-4 years.

  Although the system has never been quick to start, after the latest Microsoft
  update has been downloaded and installed, it now takes about half an hour to start
  the system of cold starts and 20 minutes from the sleep position.
  It also takes a long extra time to get the Explorer running

  What happened during the update may cause this extra on drag
  performance? How can I change?

  I tried the system restore, but it would allow me to go back only to the point
  When the MS Update has been installed.

  Thank you.

  HR Sirois

  Is your system error free?

  Event Viewer reports

  1. normally, when an error occurs on your computer looking in Event Viewer should be your starting point to find a solution. More related system errors are recorded and get an exact copy of the relevant report is important. Unfortunately, is not easy to understand reports and most of the users computer need help with their interpretation. I have to say later interpretation.

  2 Event Viewer includes three main newspapers of Windows. Here's the Application, security, and system. For purposes of troubleshooting system is by far the most important.

  3. to access the system log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window select Windows and the system logs. Place the cursor on the system, right click and select filter current log. Check the front of the error and click OK and see you only reports errors. Click the Date and time column header to sort. You may need to click a second time to see the last report above.

  4. a tip for posting copies of error reports! Run Event Viewer and double-click the error you want to copy. Click the copy button to place a copy in the Clipboard and close Event Viewer. Now start your message and paste it into the body of the message. Make sure that it is the first dough right out of the event viewer.

  5. He cautioned against three types of reports, information, and reports errors. In most situations, it is the error reports that offer the best information but sometimes WARNING reports provide useful clues.

  6. all reports have stamps date and hour and when troubleshooting, it is important to focus on the latest reports. Reports of studies from the point when the computer is started, and then check if a similar report appeared in the previous session. If errors do not repeat investigation as to why they happen is wasted effort.

  7. in the individual reports the most important information is the event ID and Source such as these help when looking for help on the internet. The description is just as important and copy the exact text to use as search criteria greatly helps achieve better results when using Google. Not paraphrase descriptions when other people asking for help.