After you install a Foxfire 5.0 update, I get this message when you try to open Mozilla: the procedure entry point sqlite3_db_status could not be located in the dynamic link library mozsqlite3.dll.

Similar Questions

• Update will not work because of missing files or procedure entry point NSS_InitializePRErrorTable could not be located in nssutil3.dll

  After update mozcpp19.dll and mozcrt19.dll files are not in the Firefox directory, and start conversation said that he needs them.
  If I put them in the boot of the not required files but gives an error
  Procedure entry point NSS_InitializePRErrorTable could not be located in nssutil3.dll

  I've just updated to Firefox 10.0.2 and exhibit the same problem of missing dll (Mozcrt19.dll and sqlite3.dll)

  I'm also using ZoneAlarm (but not a version with the virtualization of the browser) and find a comment about ZoneAlarm, I decided to stop ZA and try again Firefox: it starts without a problem.

  So my quick fix (very) is to stop ZA, launch Firefox and restart ZA....

• the procedure entry point NSSUTIL_EscapeSize could not be located in the dynamic link library nssutil3.dll

  Windows XP with Firefox 18.0.1 does not open when upgraded to the latest version.
  Error messages have been
  (1) the procedure entry that point pr_setcurrentthreadname could not be located in the dynamic library (2) ndpr4.dll the procedure entry point NSSUTIL_EscapeSize could not be located in the dynamic links (3) library nssutil3.dll was not able to load XPCOM

  A ran malware & anti-virus software then deleted Firefox via Control Panel, then residual file file C:\Documents & Folders\ApplicationData\Mozilla Director and program folder.
  Local & installed products ndpr4.dl and nssutil3.dll - fresh reinstall firefox several times - he got rid of the error message 1 but not 2 or 3 always cannot open Firefox.
  All solutions?

  I have this problem and I use Zone Alarm Extreme Security with Force active field. I found that by turning off the virtual Cache in Zone Alarm that this problem has disappeared and has been able to restart firefox.

  Here is a post I found that addresses the issue in some way. http://KB.mozillazine.org/Browser_will_not_start_up#Firefox_does_not_start_after_updating_with_ZoneAlarm_ForceField_enabled

• The procedure entry point strnlen could not be located in the dynamic link library msvcrt.dll

  Using Firefox 50.0 XP, SP3 - update from the previous version.

  This is the popup-

  http://i.imgur.com/3Jo5sqB.jpg

  Firefox.exe - Entry Point not found

  "The procedure entry point found strnlen in the dynamic link library msvcrt.dll."

  This occurs after I upgraded to 50.0 FF - I tried to reset and clean browser cache. Happens again 1 - 3 times per day. I am able to click through it, but why?

  Bug?

  Any help appreciated.

  TIA :)

  Here's what I did:

  Completely uninstalled FF 50 of my system. Following the official procedure of Mozilla.

  https://support.Mozilla.org/en-us/KB/uninstall-Firefox-from-your-computer#w_uninstall-Firefox_3

  Exported bookmarks and bookmarks toolbar.

  Then ran SFC - clean result. Used CCleaner for registry and cache - totally cleaned.

  The system is completely clean. Reinstalled FF 50. The imported bookmarks and bookmarks toolbar.

  One by one from reinstalled add-on.

  From this post, everything is fine - need a week. I will post at the time. If earlier said problem arises.

  Thank you! :)

• procedure entry point _except_handler4_common could not be located in the dynamic link library msvcrt.dll

  I installed assassin creed III, but when I want to play it game this error:

  procedure entry point _except_handler4_common could not be found in the dynamic link library msvcrt.dll.
  I don't know how can I solve the problem.please help me

  Hi mosi0098,

  Welcome to Microsoft Community where you can find all the answers related to Windows. You get the error message when you try to install the game, try the steps in this article and check:

  Error message: Procedure Entry Point not found in Msvcrt.dll file

  http://support.Microsoft.com/kb/324762

  Hope this information helps. If you have any other questions feel free to respond and we would be happy to help.

• The procedure entry point LdrSystemDllInitBlock could not be located in the dynamic link library ntdll.dll

  I was not able to use a particular computer since Wednesday morning, August 14, 2013.  The error dialog box. "The procedure entry point not found LdrSystemDllInitBlock in the dynamic link library ntdll.dll" on almost every application I try to open that includes IE, FireFox and Chrome browsers.  System/Windows Control Panel applications seem to work but nothing else.  I tried to do a restore of the system on several points before August 14, nothing helps.  That is that I keep getting this error on every application dialog box.  Is there one resolution other than backup can I reinstall Windows?

  Hi David,

  1. you remember changes to the computer before the show?

  2 the computer sits in a field?

  This problem may occur if the ntdll.dll file is damaged.

  Here are some ways you can follow to resolve the problem:

  Method 1:

  I suggest that you run SFC scan to check for missing or damaged system files. To do this, follow the steps mentioned in the link:
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  Method 2:

  I suggest you to re-register the dll (Dynamic Link Library) file from an elevated command prompt.

  a. click Start.

  b. type Cmd.exe.

  c. right-click on cmd.exe and select run as administrator.

  d. type regsvr32 ntdll.dll and press enter.

  Method 3:

  Step 1:

  You can try to start in safe mode and check if the problem persists. Only basic files and drivers needed to run Windows are started. If a problem doesn't reappear when you start in safe mode, you can eliminate the default settings and basic as possible cause device drivers. To start in safe mode follow the link.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2:

  If the problem does not occur in safe mode then boot to the desktop in normal mode and check that the third-party program is causing the problem. To configure your computer to clean boot follow the link below.

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8
  http://support.Microsoft.com/kb/929135

  Note: See "How to reset the computer to start as usual after a clean boot troubleshooting"

  under more information to prepare the computer to start as usual after a repair.

  Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.

• Procedure entry point __lc_collate_cp could not be located in MSVCRT.dll and services.exe

  After restarting my computer when you are prompted, I received the following error message
  SERVICES. EXE - NOT FOUND ENTRY POINT

  "" The procedure entry point not found _lc_collate_cp_func in the dynamic library MSVCRT. "." DLL.

  I can't go in front of her and the computer does not start
  Do you have any idea what this might be or how to fix it?

  Hello

  1 how long have you been faced with this problem?
  2 do you have you can all changes on the computer before this problem?

  Try the steps outlined in the article below and check if this help.
  Error message: Procedure Entry Point not found in Msvcrt.dll file
  http://support.Microsoft.com/kb/324762

• I am often unable to re - open Firefox in my laptop Windows XP based after I have just closed a previous session. I have to wait 30 more seconds or more. I get this message when I try to open immediately

  I can possibly open a new session

  Firefox takes a little time to close all the files that could be opened while it is running (like 5 seconds), but if the process crashes for as long as 30 seconds or more as you said you can have an add-on or a security program which is at the origin of Firefox takes too long to close completely.

  Firefox crashes when you close

  You need to look in the processes for firefox.exetab. But if you "kill" process, you might lose data. "Session" data are probably the first type of data that could be lost. Also, close Firefox with lots of tabs / windows open or quickly close tabs or windows immediately before closing of Firefox can result in a prolonged downtime.

• The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic library SQlite3.dll

  Hello

  My computer shows the message above to start...

  Pleaseadvise I must dotorectify the error...

  SQlite is not a Microsoft program.

  It is used by other programs such as Firefox and iTunes.

  You should be able to determine which program is causing the error by disabling the Start Up items unit you no longer receive the message. Use WIndows Defender to disable start-up programs: http://windows.microsoft.com/en-US/windows-vista/Stop-a-program-from-running-automatically-when-Windows-starts

  If your antivirus to stop Windows Defender running, proceed to step 4 of this article: http://support.microsoft.com/kb/929135

  The most likely explanation is a program from Apple. This thread can give you the solution:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/SQLite3-Wal-checkpoint-can-not-be-located-in/8b31c2b3-67cb-440C-B39B-4792c77c7eea?msgId=976f379e-f6ab-474B-b6bd-df7fdea0341f

• I updated Firefox, restarted and now I get the following error message when I try to reopen Firefox. "The sqlite3_stmt_readonly of procedure not found entry into the dynamic link library mozsqlite3.dll."

  I just updated Firefox and restarted.

  Download a new copy of Firefox and save the file to the desktop.

  • Firefox 6.0.x: http://www.mozilla.com/en-US/firefox/all.html
  • Uninstall your current version of Firefox.
  • Do not remove the data of a personal nature when you uninstall the current version.

  Delete the program folder Firefox before installing newly downloaded copy of the Firefox installer.

  • It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.

  Your bookmarks and other profile data stored in the Firefox profile folder and will not be affected by a relocation, but make sure that you do not select delete data of a personal nature if you uninstall Firefox.

  • http://KB.mozillazine.org/Profile_folder_-_Firefox

• When you try to log in to firefox, I get the message"the procedure entry point js_NextActiveContent could not be located in the dynamic link library js3250.dll. »

  ... And I can't open it.

  See:

  • http://KB.mozillazine.org/Browser_will_not_start_up#Procedure_entry_point_js_SaveRegExpStatics__error_in_js3250.dll_after_updating_Firefox

• the procedure entry point ntalpcsendwaitreceiveport could not located in ntdll.dll error whiel opening programs

  original title: ntdll.dll
  When I run no matter what program to progdvb ouvertede find this problom
  the procedure entry point ntalpcsendwaitreceiveport could not be located in the dynamic link library ntdll.dll

  Hello

  Follow these methods.

  Method 1: Follow these steps:

  Step 1: Start the computer in safe mode and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start and then click Run.

  (b) type msconfig and click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal Startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 2: Scan the file system (CFS) auditor to repair corrupted files.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

• Start Windows 7 error"the procedure entry point not found objc_exception_try_enter in the dynamic link library objc.dll"

  The procedure entry point objc_exception_try_enter could not be located in the dynamic link library objc.dll

  How can I avoid that this message that appears on my desktop when I connect to my desktop computer?

  I deleted iCloud and other programs, but it still appears.

  You can try the clean boot procedure to try to ascertain what autorun program is triggering this msg

  http://support.Microsoft.com/kb/929135

• Error 'the procedure entry point not found RtlCopyContext in the dynamic link library ntdll.dll' while clicking on

  Original title: I got this error by clicking

  Hello, I got this error by clicking on any .exe file (Anti Virus, players, etc.). "The procedure entry point rtlcopycontext could not be located in the dynamic link library ntdll.dll" Please help me because I can't start any program...

  Here is the screenshot of this error!

  http://Windows.Microsoft.com/en-us/Windows7/change-default-programs-using-set-program-access-and-computer-defaults

  Thank you very much. Problem has been resolved

• the procedure entry point longimp could not be found in the dll orauts.dll

  I use the oracle 11g R1, on Windows xp sp2 OS.when I wrote sqlplus in start-> run this error came:
  the procedure entry point longimp could not be located in dynamic link library orauts.dll
  
  Earlier which worked fine, but now its display error. How to solve this problem?

  user12222356 wrote:
  I use the oracle 11g R1, on Windows xp sp2 OS.when sqlplus in the early-> run this error, I wrote came:
  the procedure entry point longimp could not be located in dynamic link library orauts.dll

  Earlier which worked fine, but now its display error. How to solve this problem?

  SB,

  This code you ask the OP to execute and test? The error occurs when it is going to start > run and type sqlplus.

  OP,
  There was even a thread about this error,
  Problem at startup of SQL * MORE in oracle database 10g

  According to this, you should check the path of your system settings. There is also a MOS score, but who's not with you I guess since that talk about 10g and issues, according to the note, talk about patching of the db and 10202. But since you're already on 11 GR 1 material, you should be fine.

  Check path settings and try to go into the BIN folder and running the sqlplus a go from there. Post reactions here when you do that.

  HTH
  Aman...