After you install a new copy of Windows 7 and updates, download now not a genuine copy

Similar Questions

• Certificate of authenticity will work after you install the new copy of Windows 7 64-bit?

  * Original title: COA

  Hi all

  I bought a used Dell laptop which still has its COA on the bottom of the unit.  Apparently the device was installed with Win 7 when new.  I would like to install a new copy of Win 7 64 bit, but would not know if the COST I would work since there is no information if the original installation is 32-bit or 64-bit.   Thanks for any information you could share with me.

  TT

  The COA will work as long you have correspondent reinstall media:

  For 5 years, Microsoft made it fairly easy for users of the Windows 7 operating system to get reinstall media. If you have lost your support disc or installation retail collection; either it has been damaged or defective; You can download a copy of the edition that you have licensed from a membership site called Digital River. More recently, Microsoft ended the availability to reinstall media that you can download as a. File ISO in Digital River, which is a digital reproduction of an optical disc.

  It was particularly convenient for people who could not easily get the manufacturer's recovery media, did not want to pay the fees required to get or preferred a clean configuration without the software packaged manufacturers or even a recovery partition does not work. It's easy to use, all you had to do was reinstall and reactivate using the product key located on the certificate of authenticity and download all the drivers on the manufacturers website.

  Given that this option is no longer available, what are your options? See the article for more details:

  How to: What are my options for Windows 7 reinstall media?

  Make sure you scroll down and read the section:

  What to do if you cannot get your manufacturer recovery media, refuse to use or to buy it or the Microsoft Software Recovery Website does not work?

  Other options:

  Step 1: Download a copy of Windows 7:

  For 5 years, Microsoft made it fairly easy for users of the Windows 7 operating system to get reinstall media. If you have lost your support disc or installation retail collection; either it has been damaged or defective; You can download a copy of the edition that you have licensed from a membership site called Digital River. More recently, Microsoft ended the availability to reinstall media that you can download as a. File ISO in Digital River, which is a digital reproduction of an optical disc.

  It was particularly convenient for people who could not easily get the manufacturer's recovery media, did not want to pay the fees required to get or preferred a clean configuration without the software packaged manufacturers or even a recovery partition does not work. It's easy to use, all you had to do was reinstall and reactivate using the product key located on the certificate of authenticity and download all the drivers on the manufacturers website.

  Given that this option is no longer available, what are your options? See the article for more details:

  How to: What are my options for Windows 7 reinstall media?

  Make sure you scroll down and read the section:

  What to do if you cannot get your manufacturer recovery media, refuse to use or to buy it or the Microsoft Software Recovery Website does not work?

  Step 2: Perform a custom installation, see Windows 7 section of the following article how to perform a custom installation:

  How to: perform a customized Windows installation

  Step 3:

  http://techingiteasy.WordPress.com/2012/04/13/how-to-activate-Windows-7-OEM-license-using-a-retail-disc/

• error code when sent for test printing after you install the new printer on windows 8

  Installed a panasonic KX-P1121E printer on windows 8. I got an error code when sending for printing of the test. And not able to print. Help, please.

  Hello

  Please provide more information for me to better understand the issue.

  1. how the printer is connected to the computer? Is it wireless or wired?

  2 do you have updated printer drivers?

  3. What is the full error message you get when you try to print?

  These steps will help you identify and fix common printer problems in Windows, including print errors, print spooler errors, and other issues that could prevent you from printing.

  Method 1: check if the printer is correctly installed.

  You can check the link for more information about how to install a printer.

  Install a printer

  http://Windows.Microsoft.com/en-us/Windows-8/install-a-printer

  Method 2: you can check the link for the troubleshooting steps.

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  You can check the link to download the drivers.

  http://Panasonic.NET/PCC/products/printer/windows_compliance/windows_8.html

  If please get back to us and let us know if this helps to resolve the issue.

• my wireless mouse and keyboard do not with windows xp after you install a new battery.

  my wireless mouse and keyboard do not with windows xp after you install a new battery. they work very well in the diagnosis.

  Hi nwecker,
   
  -What is the brand and model of your mouse and your keyboard?
   
  If the keyboard and mouse are Microsoft, here are some links that you can give a try on:

  Troubleshoot the incidents of the response to the mouse or wireless keyboard

  Solve the lack of response from the keyboard or the mouse wireless after weeks of typical use

• HP 5510 will be not printed black before and after you installed the new cartridge. the specified controls did.

  Photosmart HP 5510 will be not printed black before and after you installed the new cartridge.  The specified controls did.

  Yes, I was referring to manually clean the print head. I see that the 5510 lacks the possibility of leaving the print head manually.
  
  You can click on the menu of your SETUP program on your screen and go to TOOLS and clean the print head from there.
  
  If this does not resolve your problem, you may need to replace the print head.
  Contact HP Total Care (1800-474-6836), and if your unit is under warranty, its free.
  
  Let me know if this can help, thank you.

• AFTER YOU INSTALL SERVICE PACK 1 FOR WINDOWS VISTA, MY COMPUTER WILL NOT START SAYS UNATTENDED, DLL

  AFTER YOU INSTALL SERVICE PACK 1 FOR WINDOWS VISTA, MY COMPUTER WILL NOT START SAYS UNATTENDED, DLL

  Follow these steps to try to solve your problems of boot.

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• I saved mybookmark tabs, history, addons, preferences. But after I installed the new copy of Firefox, I am not able 2 synchronize my data in my Firefox. WHT shud - I do?

  I had backed up my data (bookmarks, preferences, tabs, history, modules) using Firefox sync. I formatted my PC and install a NEW copy of Firefox. But when I tried to restore the data using sync FF and after connecting successfully, they showed me a notice saying that "Firefox will start to sync temporarily" but my data has not been restored. What should I do to retrieve the data I saved?

  Firefox Sync is not a backup service unfortunately. Please consider in the future to save your profile locally before you reformat your computer. Backup and restore Firefox profiles information

• After you install a new motherboard, Windows XP says to turn on again, but it fails.

  I installed a new motherboard and now I have a saying of screen I have to activate windows again but activation fails with the message saying that could have pirated software. I walked into the 7 sets of 6 numbers, as requested by the machine on the phone. I also tried to activate online, but the computer does not connect. Anyone have a phone number for uk support it is a person not a machine?

  original title: Windows XP activation problems

  Your problem is probably because you have a preinstalled Windows - an OEM copy - copy and these licenses CANNOT be transferred to the new motherboards or new computers, except in conditions of warranty.

  Activatin is using the product key - which consists of 5 blocks of 5 characters each.

  The ID of the product that is referenced in the Sytem Propertyies page, will show if you have a key OEM - the second group of characters will be OEM, if so.

• How to reactivate Windows XP after you install a new motherboard?

  original title: REACTIVATE MY XP PRO AFTER INSTALLING NEW motherboard

  I had to have a new card mother installed a few days ago and after I got my CPU home and hook

  place a screen came up saying I had to re-activate my XP Pro.  Thirdly, I bought this computer custom made

  hand and was not given any o/s disc or product key, but I upgraded the operating system and it has been certified

  my Microsoft before.  How to re-enable it without the product key?

  Use Magical Jellybean Keyfinder to get your product key and then activate in the usual way.

  I assume that, by "upgrading of the o/s", you mean that you have downloaded and installed service packs or updates to security and not if you change from one version of Windows to another.

• The Windows Installer appears when not claimed after you install the new printer.

  I installed a Canon S400 printer and now when I open a folder, file or no matter what shortcut (either by double clicking or right click Open) MSI is trying to install one of the two applications PDF I had already installed. After canceling the installation program, the file opens. How can I fix? I am running Windows XP SP2. Please do not say reinstall applications, I have uninstalled them because they proved to be useless junk.

  If you don't want to reinstall applications, then use the Windows Installer Cleanup utility to remove these entries.

  Clean Up MSI (Windows Installer) - http://support.microsoft.com/default.aspx?scid=kb;en-us;290301

  MS - MVP - Elephant Boy computers - don't panic!

• Windows does not restart after you install the new hard drive.

  Hi, I upgraded from 100 gig 250 gig drive hard nice clean installation, worked perfect. Turn off the laptop, turn back on and only bios are accessible, without window, just a black screen with a small white bar flashing at the top of the screen. Put old drive in, everything works fine and in disk management the new shows drive but are not accessible? Anyone got a clue?

  Now I found the answer to my problem. Acer Aspire9802 WKMI recovery allows only 32 GB max loading mbr, therefore partitioned readers with a free majorgeeks.com partitioner and ye he

  The free program, I called EASUS PARTITION MASTER, dead easy to use for a novice like me! and with an instruction book complete in pdf format

  every 4 years, 21 '' screen singin' and laptop dance - now considered to be old!

  I guess if the sata drive is the same sata version as controller on your laptop, that's to say sata 1 or 2 or 3
  And if a later version of the sata it's backward compatible?

  Use the utility disk provided by the manufacturer of the drive check

• Keyboard keys not working only after you install the new OS Sierra

  I just install a new one copy Mac OS Sierra, but after that the keys on my keyboard don't work properly as some of the keys do not work yet at all. What can I do to solve this problem, and also if there is any software I can use to test the keys on the keyboard works properly or not

  See if you have enabled mouse keys. Other users have reported that after update to Sierra

  OS x: Impossible to type while mouse keys is enabled - Apple Support

• After you install a new motherboard it takes forever to reach the sign on screen after power on

  After turning on the computer, the new phones logo screen remains on for centuries before I got the sign of windows on the screen. If I disable this screen in the bios, I get messages from post for centuries, which is just as boring.

  Unless it is an exact replacement for an older MB, you must download and install all the drivers of Windows XP available for her, beginning by the chipset drivers. If you are unsure how to do this, view the make and model (including revision number; it is usually screen printing on the MB if is not in your documentation), and we will try to help you.

  SC Tom

• laptop does not start after you install a new hard drive

  HP G60-630us laptop... .replaced hard drive... .installed 3 boot disks... After you remove the last drive, when you click on continue it is supposed to start... .it reads no boot device... . If put you the first disc to start, you end up back where you started... I changed the boot order and put the hard drive first... even starts

  Hello

  That sound great for the hard drive.

  With regard to the problem you have with Windows activation, it's because your laptop is listed as originally came with Windows 7 Home Premium - as I mentioned in my guide for the creation of a sale installation disc at retail, the image that you use needs to be also be Home Premium - IE you cannot move to professional or ultimate edition as the key on your COA label will not work for a different version of Home Premium and there is no way around that.

  The image that should be used is on the following link.

  Windows 7 Home Premium 64-bit.

  You will need to create another disc of installation using the above Image and then use it to reinstall Windows 7 - the activation methods I described previously, then will work fine.

  Kind regards

  DP - K

• After you install service pack 2 for windows vista

  After installing service pack 2 for windows vista on my HP laptop, I started having a few problems. First off the computer would not go beyond the Welcome screen because he showed that an update was the installation (step 1 of 3:0 % etc.) and the computer reboots before finish. It kept the case whenever I started upward, even on safe mode. I tried to restore, but it would never be completed and nothing else would work. Now I can't go beyond the microsoft loading screen because it shows a black flat screen with no cursor. I can't enter safe mode. Help, please. Safe mode only shows the start screen but won't start so I can't access the control panel and tried to boot to the last known successful startup but it failed.

  Hello

  Try a startup repair and / or a system restore using a DVD of Vista from Microsoft

  Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.

  Here is the guide to repair Options using a Vista DVD from Microsoft.

  If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

  http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

  Table of contents

  1. Overview of Windows Vista repair options
  2. How to perform an automatic repair of Windows Vista using Startup Repair
  3. Advanced Tools Overview
  4. Conclusion

  If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

  Unfortunately, you have to buy it.

  Here is a link to it:

  http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  This Information Microsoft can help you resolve problems that you encounter during the installation of Service Packs for Vista.

  http://support.Microsoft.com/kb/947366

  And there is a Forum that Microsoft has put in place for problems with Vista Service Packs. If repost you the Forum they will definitely try to help you here...

  http://social.technet.Microsoft.com/forums/en/itprovistasp/threads

  Or you can repost you this link in the Windows Update Forum.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

  See you soon.