After you install an update, I have a new toolbar.

Similar Questions

• Why my virus program esetnod 32 guard tell me that my system is not updated after you install the update of all the nessary?

  Why my virus program esetnod 32 guard tell me that my system is not updated after you install the update of all the nessary?

  I have download all necessary Windows 7 updates, but they are not installed. Can anyone help?

  Kind regards

  Mitch

  Hi Mitchell,

  Please uninstall and reinstall the ESET program and check if it solves the problem:

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  For further assistance:

  ESET knowledge base

  http://KB.eset.com/esetkb/index?page=home&locale=en_US&option=None

  Please post us with the result.

• After you install the update, I get this message on an application Facebook '502 Bad Gateway nginx' what is the problem and what should I do to solve the problem?

  After you install the update, I get this message on a Facebook '502 Bad Gateway application
  Nginx' what is the problem and how do I solve the problem?

  See also:

  • http://en.kioskea.NET/FAQ/15289-Google-nginx-404-error
  • [811399/questions/811399]

• After you install the update for LR cc 2015/5 AffichageOptions in the library doesn´t Module shows any type of lens. What has gone wrong?

  After you install the update for LR cc 2015/5 AffichageOptions in the library doesn´t Module shows any type of lens. What has gone wrong?

  See this thread on the official Adobe feedback site: Lightroom CC 2015: objective metadata missing when importing field. Community customer Photoshop family

• High CPU use/Slow Performance after you install the updates of Windows

  I run Vista Business 32-bit.

  After you install many Windows updates in the last few days, I've known very slow performance after the system worked for a while. Resource monitor shows 70-100% CPU usage, even when you run all the apps (that I know of). This makes everyhting grind to a halt, same trip that the mouse jerky movements. I ran several complete system with McAfee anti virus scans and not found problems (using the latest software). The detail showed the so-called ", PID4 NT kernel and system" using 18% avialable CPU capacity, but this process is not always shown to use much more capacity when the slow performance occurs. Nothing else don't use much capacity CPU, I see.

  More recently, the capacity of the CPU became crazy, jumping from zero to 100% usage in a back a suite oscillation. When I shut down and restart, performance improves, but erodes little by little over time.

  Is this a sign of a virus, or is it a problem with the recent Windows updates or some kind of conflict with my software such as McAfee? How do I tell me what to do? Anyone else have this problem with the recent Windows updates?

  Help!  Thank you!!

  McAfee applications (and Norton) are known for not not upgrade (or uninstalling) itself.

  1. download the McAfee Consumer Product Removal, save it to your desktop tool: http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. now run this triple McAfee fix: http://service.mcafee.com/FAQDocument.aspx?id=TS100507

  NOTE: Step #2 McAfee fix run the removal tool, you have already downloaded in my step #1 above.

  4 IMPORTANT! => After the reinstallation of the McAfee application (step #3 of the McAfee fix), manually & repeatedly updated the McAfee application, until you get a prompt "no update more".

  5. open Internet Explorer (only) to http://support.microsoft.com/kb/923737 & run the difficulty.

  6. OPTIONAL: For good measure, pen also Internet Explore (only) to http://support.microsoft.com/kb/971058 & race that secure it in DEFAULT and modes and AGGRESSIVE. [1]

  7 restart a last time & test.

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Satellite Pro T130 - problems in sleep mode after you install the update wireless

  After installing the 3G modem & updates on day of Wireless manager from 29 September, my laptop began to have trouble waking sleep mode. Most of the time I had to hard stop. I solved currently the changing options issued for the "sleep mode" in the Panel, for the most part by turning off the advanced features (hybrid sleep, sleep, sleep network adapters usb). However, I want to solve the problem no doubt, as the current options require more time to enter the mode 'sleep'.

  My laptop is a Toshiba Satellite Pro T130 running under Windows 7 64-bit.

  Please help us :-)

  You have installed the updates recommended by Tempro?
  You can send us you have installed versions?

  I assume that with the old versions you didn t have this problem?

• My phone is lock and does not start after you install an update to Windows.

  After you have installed the Windows Vista Home Premium on my laptop, I am unable to start my laptop properly.

  Boots systems and load normally until the display of connection where instead of the login screen, I show the screen updated frozen on "Installing part 3/3 (0%) update." The laptop stays on this screen, with the cursor froze with a loading icon, for about half a minute until the screen shuts off and reboots the system, put the system in a loop, I can't on.

  I tried: turning off on and powered. using advanced boot options to open the system to all types of 'Safe Mode' and leaving the laptop for some time before trying to turn on the system again. All these things have not worked and the system remains in the lock down.

  I wonder if it is a common problem after the latest Vista updates or if it is more specific to my laptop. Whatever it is, any kind of feedback and advice would be most appreciated.

  Thank you.

  After you have installed the Windows Vista Home Premium on my laptop, I am unable to start my laptop properly.

  "part 3/3 (0%) update installation." ... and restart the system.

  See if this sugesstion can help you:- http://support.Microsoft.com/kb/949358 >

• Unable to connect to the Internet after you install the update

  My computer crashed this afternoon. I restored it since restoration, but Firefox lost disk and my Trend Micro antuvirus.  I downloaded the two products, but when I try to install them, they are trying to reconnect to the internet to complete the download.  Or the program is able to do.  I can log on the Internet and to allow them there have turned off the Windows Firewall and Windows Defender, suspecting one of them was blocking the remote connection.  I am running Windows Vista and IE8.  When I Windows Update, I lose all internet connections and have to use system restore to go back before the updates.

  Original title: remote connections

  Hi Cauvagee,

  ·        You are able to access remote desktop connection now after you disable the firewall and Windows Defender?

  It seems that one of the update is at the origin of the problem of Internet connectivity. You can follow the steps below and check it it helps you solve the problem.

  Step 1

  You can access to view the history of update on your computer and the Coachman, who was the last update that was installed when this problem occurred and post back the details of the update.

  To view the update history, follow the steps below:

  a. open the control panel (all items view), and click the Windows Update icon.

  b. click on the link to view update history.

  Step 2

  Check out who are the updates which has been installed on the computer before that the problem began, later, uninstall it and check if that helps.

  1. Open installed updates by clicking on theStart button, clickingControl Panel, clickingPrograms and then underPrograms and features, clickingView updates installed. Note the number KB for the updates have been installed before this problem started.
  2. Select the update that has been installed and uninstall the updates one by one and check the update which is at the origin of the problem.

  Step 3

  Once you take note of the update that causes this problem, you can download the stand-alone version of the update on your desktop and try to install it manually and check to see if it helps you to solve the problem of internet access. To download the standalone version of windows updates follow the steps below:

  a. take note of the update with the Ko only when your computer tries to update and install it.

  b. visit the following Microsoft Web site:http://www.microsoft.com/downloads/Search.aspx

  c. search by downloading the update.

  d. save it on the desktop.

  e. try to install it manually.

  If the problem persists after you have installed the stand-alone version of update, you can try to start the computer in safe mode with network and check if you can connect to the internet and post back the result. To boot to the desktop in safe mode keep tapping key F8 during restart. Once you see the option to start it in safe mode with select network and press ENTER.

  Access the link to learn more about how to start the computer in safe mode:http://windows.microsoft.com/en-US/windows7/Start-your-computer-in-safe-mode

  I hope this helps. Let us know the result.

  Thank you and best regards,

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• After you install the updates of windows for Vista home edition, the computer tries to restart and then says "computer could not start", then begins to the Startup Repair. Suggestions, how can I fix?

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Hello

  Welcome to the community of Windows Vista answers.

  First of all, we will try if we can start in safe mode.

  Safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed.

  Steps to start your computer in safe mode with networking
  1. to start mode safe mode with networking, restart the computer and press the F8 key for about four to five times. You will see "Safe Mode with network" listed in the advanced options of Windows.

  2. Select "Safe Mode with network" and then press ENTER.

  Access the link below for more information on how to start in "Safe Mode with Networking":
  http://windowshelp.Microsoft.com/Windows/en-us/help/323ef48f-7b93-4079-a48a-5c58eec904a11033.mspx

  The system restore.
  http://support.Microsoft.com/kb/936212

  Method 1:
  The restore of the system of Windows Recovery Environment (WinRE)

  (a) Insert Vista DVD and boot from the DVD.

  (b) that you want to start the computer from the Windows Vista DVD, you press a key, your keyboard when you see the prompt. You should now see a black screen with a white status bar at the bottom indicating that Windows is loading files... After some time, the status bar becomes completely white and you will see a screen indicating that Windows is loading. The environment of the installation of Windows continues to load and when finished you will be presented with a screen that prompts you for information about your location and language.

  (c) in this screen, you must configure the language to install, time and currency format and keyboard or options for method of entry so that they are well positioned. When done, press the next button. You will now be at the main Windows Vista Setup screen where you would normally install Vista on a computer.

  (d) because we want to repair the computer, you must click on repair your computer option. This will bring you to a new screen where the repair process get all facilities of Windows Vista on your computer. When finished, you will be presented with the System Recovery Options dialog box

  (e) select the Vista installation you want to repair.

  (f) in the system recovery options, click on system restore to restore the system.

  Method 2:

  Run the disk check Windows recovery environment to correct the bad sector on your hard drive

  (a) Insert Vista DVD and boot from the DVD.

  (b) that you want to start the computer from the Windows Vista DVD, you press a key, your keyboard when you see the prompt. You should now see a black screen with a white status bar at the bottom indicating that Windows is loading files... After some time, the status bar becomes completely white and you will see a screen indicating that Windows is loading. The environment of the installation of Windows continues to load and when finished you will be presented with a screen that prompts you for information about your location and language.

  (c) in this screen, you must configure the language to install, time and currency format and keyboard or options for method of entry so that they are well positioned. When done, press the next button. You will now be at the main Windows Vista Setup screen where you would normally install Vista on a computer.

  (d) because we want to repair the computer, you must click on repair your computer option. This will bring you to a new screen where the repair process get all facilities of Windows Vista on your computer. When finished, you will be presented with the System Recovery Options dialog box

  (e) select the Vista installation you want to repair

  (f) in the system recovery options, select command line and enter the command chkdsk/r.

  For the above two steps, you can see the link below.
  http://windowshelp.Microsoft.com/Windows/en-us/help/95b4c03a-ac42-49a4-a90d-8f3736a995271033.mspx

  Once you perform the restoration of the system, download the updates and install them manually one by one, this should help you knowing what update causes this problem.
   
  Concerning
  Amrihta.

• After you install the update, I get script error box popping up

  original title: after installing the update I get error script to appear, box what the sam Hill I do?

  I installed an update that recommended the bulk of security on my computer and now I get a script on the screen error message. When I tried to install a gamebar, so that the site wasn't ready yet so my update was unable to download the toolbar. This seems to be the script error that keeps popping up on my screen. I'm not an expert, far from it, in computer science, so I hope someone out there can help you.

  Thanks for your quick response and I appreciate the suggestion, but the person getting impatient that I am, I went to the backup and restore functionality and configure the computer a moment before I started to have trouble and that seems to have solved the problem. If I have problems in the future I will definitely use this site to ask questions, thanks again.

• Re: Portege R500: controller button does not work after you install the update

  After you have installed the latest version of Toshiba Value added Package, the two buttons (toshiba assist, and backlight power) do not work properly: they open instead a window of Firefox.

  I guess there is something to configure in the section "Optimizing" Toshiba Assist.
  When I open the program "Toshiba buttons functions" (sorry for the puny, Spanish translation, it is called: "functions of Toshiba botones") all entries are empty and I have to enter the Url of the program supposed to turn off the backlight of the screen of my LCD...
  I have no idea where to find this executable.

  Can someone help me?

  Why you n t use the OS restore option?
  The operating system supports the option of system restore and this helps to put the system in the previous point.

  Check, maybe it helps to get the old version of the Toshiba Package Value added.

• After you install the update to Windows, the configuration is impossible, so it is up to the old configuration

  Once I have install Windows updates and the computer is restarted, the subsequent configuration process does not correctly (it still says 0% complete) and then the computer opposite to the old configuration, so that the "Important updates of Windows" message appears again and again because it has not been installed correctly.

  Could you tell me what is happening?

  Hello

  1. the updates you are trying to install?

  2 did you change on your computer before this problem?

  You can follow this link & check if the problem persists:

  Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates

  Hope the helps of information.

• Should we format the C drive after you install this update

  I use service pack 2 automatic update to download service pack 3. Does it format the C drive after installing this update?

  No..........

• Error message - Media Center had to close after you install the updates in the Windows XP computer.

  Original title: Media Center error and close message.

  I received a windows update last night and when I restarted my computer I got an error message that Media Center had to close. I sent error report, but the error message comes back upward. How fix the error or at least get rid of the error message?

  Hi PaulArnesen,

  Update that you installed before the problem?

  (a) that you try to run the system restore that will repair return the computer to the point while it was working fine.

  How to restore Windows XP to a previous state

  (b) later, you can manually download the update from the Microsoft Download Center and install it.

  Hope the helps of information.

  Please post back and we do know.

• After you install an update from the CPU to 100% usage

  I installed an important update for Win 7, it was for forefront security. After the installation was successful, I saw that my CPU usage went to 100% and the memory above 70 %s. In the Task Manager, I saw around 50-100 process rundll32, and also a lot of wermgr.exe. I tried to uninstall the update, but the problem is that I can see that update my update history (control of configuration\systeme and Security\Windows Update\View update history) but when I want to uninstall that I don't find it in the installed updates. Please help me how to get back to the original on my laptop configuration. This problem heat intensely my laptop and I fear that it could damage my system.

  Thank you

  Anshul

  Try posting in an appropriate instance of Forefront specific: http://social.technet.microsoft.com/Forums/en/category/forefront ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft