After you install DMO of the Campus, SYSTEM installation, data mover does not show PeopleSoft HRCS Database

Similar Questions

• AFTER YOU INSTALL SERVICE PACK 1 FOR WINDOWS VISTA, MY COMPUTER WILL NOT START SAYS UNATTENDED, DLL

  AFTER YOU INSTALL SERVICE PACK 1 FOR WINDOWS VISTA, MY COMPUTER WILL NOT START SAYS UNATTENDED, DLL

  Follow these steps to try to solve your problems of boot.

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows 7 Installer error "Setup could not use the existing system partition because it does not contain the required free space.

  Repeatedly tried to install the upgrade to windows 7 and pure install and get the error message on all partitions available "Setup could not use the existing system partition because it does not contain the required free space.  All 3 partitions on a single disk have over 90 GB and separated from the disc more than 65 GB of free space according to the properties of the disk and initial screen during installation.  Tried to reformat a partition empty all reinstall Xp sp3 without result.  What can I do?

  Remove the data cable of all drives except the drive that you want to install Windows 7 on.

  Remove all external devices.

  Delete all partitions on the disk leave all of the disc as "unallocated".

  Boot from the Windows 7 DVD and then install, when you reach the point where it asks you to select a drive, click the "Advanced" option and create a new partition (at least 50 GB) to install Windows and continue with the installation process.

  Also: http://social.technet.microsoft.com/Forums/nb-NO/w7itproinstall/thread/1b1adc74-3d94-4897-a3c1-7aabde44fe4b

  JS
  http://www.PAGESTART.com

• During the installation of Windows 7 Ultimate, get error, "the installation program could not use the existing system partition because it does not contain the need free space."

  When installing win7 ultimate, {install} error message indicates "Setup could not use the existing system partition because it does not contain the free space required... I have 500 GB free, ram 4 GB 2.4 ghz quad... any help?"

  If you have any external storage devices such as external hard drive or thumb drive, unplug them, they might interfere with installation.

• I just plugged my camera and uploaded new photos for my Creative Memories Photo Manager. Now when I go to the Safely Remove Hardware my camera does not show... only my external hard drive.

  I have a new computer.  We have been plug an external hard drive to move my photos in the new computer.

  I just plugged my camera and uploaded new photos for my Creative Memories Photo Manager.  Now when I go to the Safely Remove Hardware my camera does not show... only my external hard drive.  I'm afraid of getting my camera.

  Any help is greatly appreciated!
  Thank you
  Oumar W

  Creative Memories Photo Manager probably ejected your camera after you import the images. Check the default settings and change them if you prefer something different.

  If your camera is not displayed as ejection, it is safe to remove it. Damage to the file system wouldn't be possible, but not certain, if he had written active file or buffer not released when the device has been deleted.

• the windows boot configuration data file does not contain a valid entry os

  Hello

  I got this message when recovery... I can't get the windows... I have the CD recovery, but when I boot it... It gives me this message

  the windows boot configuration data file does not contain a valid entry os

   

  
  How do I solve this problem

  Hello

  Assuming that it's just a problem with the recovery media, here's another solution, you can try.

  Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

  An example of a COA label can be seen here.

  You can create a Windows 7 installation disc yourself using another PC - just download the good Disk Image ( it must be the same version that originally shipped with your laptop - IE if your laptop comes with Windows 7 Home Premium, that is the file you need to download ) from the link below and use an app like ImgBurn to burn the ISO correctly file on a blank DVD - a guide on the use of ImgBurn to write an ISO on a disc is here.  The source of the Image is - Digital River.

  Images of Windows 7.

  Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  All pilots additional and the software you may need are located by entering your full model number or Nr here.

  Kind regards

  DP - K

• After you install Windows Vista, the maximum capacity of the hard disk reduced 80.0 GB to 3 GB

  Original title: reinstallment recent Windows vista has me to the maximum capacity of my hard disk (80.0 gb) why? __

  I recentlyreinstalled my windows vista, everything seemed to look and will work perfectly, so I decided to see how much space was left on the hard drive. My surpise there was only 3 GB of 80.0 gbhard drive. Now I'm sure that you would agree wiyh me and say that there is something wrong when installing on if so what can I do about it? You, I noticed there are some files like programs program then theres (86) below I see only in a few different places, as well as many files sent a text message if they are from my old program as if they never got deleted or formatted.

  Thanks for listening

  Hello

  ·        Did you do a clean install of Windows Vista without formatting?

  ·        How many letters pilot are there on the system, for example C:\, D:\?

  ·        The number of records your C:\ drive?

  Open C:\ drive and select all the files that are present and check what size is (of all files). Let us know the size.

  If you did a clean installation without formatting then, it may be a folder named windows.old. If you have the folder on the system, then follow the steps mentioned in the article below.

  How to use the disk cleanup feature to delete the Windows.old folder after you install Windows Vista

  http://support.Microsoft.com/kb/930527

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I installed photoshop CS4 on a new PC with the original CD. Camera Raw does not show the 'Snapshots' tool and the tool "setting of the target". Thanks for your help!

  I installed photoshop CS4 on a new PC with the original CD.

  Camera Raw does not show the 'Snapshots' tool and the tool "setting of the target".

  Thanks for your help!

  

  As you can see, you are using version 5.0, who can't stand still not instant in it.

  Please check for updates in Photoshop > help.

  Concerning

  Sarika

• The key of the MA is not configured properly or is corrupted in the file system and s doe does not exist in the repository of management.

  I get this error and is it possible to solve this problem without re-creating the service/s once again, etc. Just curious, if you have suggestions/steps I may have missed or I'll drop and recreate new services

  In any case, I have a backup of the emkey.ora and place it in the sysman/config directory, but still does not work... Please see below...

  C:\Documents and Settings\abigail > emctl status emkey

  Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0

  Copyright (c) 1996, 2010 Oracle Corporation.  All rights reserved.

  Enter the password for the repository:

  ********

  ****

  The key of the MA is not configured properly or is corrupted in the file system and the DOE

  s does not exist in the repository of management. To correct the problem:

  (1) (copy the emkey.ora another WHO file or backup machine OH/sysman/c

  onfig directory.

  (2) configure the emkey.ora file by running ' emctl config emkey - emkeyfile < emkey.

  ".ora file location >.

  C:\Documents and Settings\abigail > emctl config emkey - emkeyfile E:\app\abigail\p

  roduct\11.2.0\dbhome_1\sysman\config

  Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0

  Copyright (c) 1996, 2010 Oracle Corporation.  All rights reserved.

  Enter the password for the repository:

  ********

  ****

  The key of Em is already configured. To override the current configuration, run "em".

  CTL emkey < options > config - force. "

  C:\Documents and Settings\abigail > emctl config emkey - emkeyfile E:\app\abigail\p

  roduct\11.2.0\dbhome_1\sysman\config-force - sysman_pwd *.

  Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0

  Copyright (c) 1996, 2010 Oracle Corporation.  All rights reserved.

  The key of the MA could not be configured. Cannot access the file E:\app\abigail\product

  \11.2.0\dbhome_1\sysman\config.

  C:\Documents and Settings\abigail > emctl dbconsole sysman_pwd secure *.

  Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0

  Copyright (c) 1996, 2010 Oracle Corporation.  All rights reserved.

  http://Abigail:5501 / console/em/aboutApplication

  DBCONSOLE already stopped...   Fact.

  Officer is arrested...   Fact.

  Dbconsole fixing...   Has begun.

  Please enter repository schema password:

  Dbconsole fixing...   Failed.

  EMKey is misconfigured.

  Sorry but I have to ignore your suggestion and don't worry how I spend my time

  AND OHMYGODD IT WORKSS! For later use, this is how I solved it based on my research, in fact based on a particular search:

  http://franjv.blogspot.com/2013/08/eMKey-problems-in-Oracle-RAC-11gr2.html

  Thank you the one who wrote this and... is it the same "Fran" who helped me last time? Coincidence?

  In any case, thanks

• iTunes movie does not show on the ipad after download

  When I rent a movie via itunes on my ipad air 2 it runs it through the treatment of download, but the film does not show in one of my shopping list

  To download in the video the iPad app play you (which is where you looked too?) -It will appear in the purchased for redownloading, rentals are a unique download only

• After installation of the operating system 7, Photoshop CS does not work and is called a power PC program. It is an Intel machine and Photoshop has worked well with OS 10.6.

  After installing OS 7 (from 6 OS) on a machine Intel, Photoshop CS and CS2 will not open. I get the message that the Power PC programs are more supported. Why is this happening? Thank you.

  The message is clear (if you know what Power PC means, in other words). All G5 and many ancient used Mac made by Motorola and IBM called PowerPC processors. More recent that all Mac G5s use Intel processors.

  You talk to any OS, Mac, Windows, Linux, etc, the application that you are using must be written and compiled for the CPU and operating system, or it won't work.

  Your copy of Photoshop were written for older Mac using PowerPC applications and does not not on any Mac running Lion 10.7.x or later version. They ran under Snow Leopard 10.6.x because it was the last version of Mac OS X to include Rosetta, which is an emulator PowerPC that allowed these older apps to function, even though the Mac has an Intel processor.

  Your have several options.

  (1) buy a new version of Photoshop that runs natively under Leo.

  2) back to Snow Leopard.

  (3) purchase Server Snow Leopard from Apple ($20) and that run in a virtual machine as the free VirtualBox, VMware or Parallels. You can then run your PPC software in the virtual machine. It means that you were running an OS within an operating system and need a good amount of RAM installed to support the two well enough for your Mac is not slow to a crawl.

• Adding printer series HP PSC2100 via the IP Port, type of printer does not show on the list of devices even when you are using the factory supplied driver disk.

  Installation D-Link DP-301U network home of three computers. I am able to access the printers using its IP address, Setup has worked with Vista Ultimate system but two systems of Windows XP Pro (SP3) does not Printer series HP PSC2100 list when you use the 'Disk' during installation radio button. Is there a work around or Microsoft drivers to resolve this error?

  Hello William51,

  Thank you for your message.  Try the following steps to add your printer.
  Click "Start" > select "printers and faxes".
  Click on 'Add printer' > click 'Next' > select ' local printer, and then make sure that detect automatically is disabled
  Select "Create a new Port" and the arrow down to "Standard TCP/IP Port" > click "next".
  Click "next".
  Type the IP address and click on 'Next' > 'Finish '.
  You must then install the driver/software for your device.  You can use "Have Disk", download from website, or find your model.
  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 7 Windows Update doesn't load after installation of Windows 7 Service Pack Beta, then Outlook 2010 (Outlook 2010 has attempted to change Microsoft Update, after 24 hours, I rebooted the computer) and now, Windows Update does not work.

  Windows 7 Professional 64 bit

  Windows 7 Service Pack (so that I don't get a bunch of file wrong mistakes of corruption when using svn)

  Outlook 2010 (it works but I had to restart Windows forcefully during the first round as she tried to change the update settings)

  Now I can not install XPMode and cannot run Windows Update.  There is no error, no errors in the log of events, loading just perpetually for initial load of XP Mode or Windows Update.

  How can I fix Windows Update?

  In this forum, you will find support for Win7 SP1 RC: http://social.technet.microsoft.com/Forums/en/w7itproSP/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• After clean install of Windows 7, Netflix and Internet TV plugin does not work on Windows Media Center.

  Original title: problem with Windows 7 Media center

  Is there anyway that I can replace the whole C:\Windows\ehome? There is a permissions issue, and I can't find a way to change the permissions...

  The only reason I want to do is I did a clean install of windows 7 and the plugin TV Pluzz.fr and the internet do not work on this computer and it seems to be no work around. But I have a PC where WMC works fine and I can replace the entire record of WMC and it should work like the other PC (I think).

  I could do if I ran linux or something, but I'm looking for something simple or a fix to this problem with WMC.

  Hello

  Thanks for the reply.

  It is too bad to know the steps in my previous post did not help to solve the problem.

  I would like to inform you that starting from September 20, 2012, the experience of Internet TV is no longer available. You can consult the following Microsoft article that has the same information:

  Cannot open Internet TV in Windows Media Center

  http://support.Microsoft.com/kb/2801382/en-us

  For problems with Netflix, I suggest you follow the steps in the Microsoft article and check following:

  http://support.Microsoft.com/kb/972496/en-us

  Also applies to Windows 7.

  Please answer us on the State of the question to help you further.

• iMac 27 "2010 super reader accepts the Snow leopard installation disc, but does not seem to sit in the car to allow their reading

  iMac 27 "2010 snow leopard install disc came with my iMac and are version 10.6.3

  installation disk after installation of the new hard drive I need to load but SuperDrive does not appear to load correctly the cd in the drive. I can eject with eject button, but as operating system has not loaded, I get accepting player and playback of discs.

  Super car has always been a guy to load discs so am aware of that happening.

  Tips anyone?

  Thanks in advance

  Sarah X

  I think you can find what you need in l http://www.dummies.com/how-to/content/how-to-boot-snow-leopard-from-a-dvdrom.htm

  If who disobeys, then your drive may have problems.

  Further, create a clone bootable on an external HD. You will need either SuperDuper or Carbon Copy Cloner to make. Then, when you install a new HD, just boot from the clone and the format, the HD and restore the complete system of the clone.