After you install Windows 7, go back to Vista and asks for a password but do not remember placement

Similar Questions

• After you install Windows Vista, the maximum capacity of the hard disk reduced 80.0 GB to 3 GB

  Original title: reinstallment recent Windows vista has me to the maximum capacity of my hard disk (80.0 gb) why? __

  I recentlyreinstalled my windows vista, everything seemed to look and will work perfectly, so I decided to see how much space was left on the hard drive. My surpise there was only 3 GB of 80.0 gbhard drive. Now I'm sure that you would agree wiyh me and say that there is something wrong when installing on if so what can I do about it? You, I noticed there are some files like programs program then theres (86) below I see only in a few different places, as well as many files sent a text message if they are from my old program as if they never got deleted or formatted.

  Thanks for listening

  Hello

  ·        Did you do a clean install of Windows Vista without formatting?

  ·        How many letters pilot are there on the system, for example C:\, D:\?

  ·        The number of records your C:\ drive?

  Open C:\ drive and select all the files that are present and check what size is (of all files). Let us know the size.

  If you did a clean installation without formatting then, it may be a folder named windows.old. If you have the folder on the system, then follow the steps mentioned in the article below.

  How to use the disk cleanup feature to delete the Windows.old folder after you install Windows Vista

  http://support.Microsoft.com/kb/930527

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• A Message in a rectangular box "Messages Agent wants to use the 'Local products' kenchain. appearing on the screen and ask for Keychain password password.  This started after I changed the password of Apple resulting for the purchase of a new iPhone

  A Message in the box 1. "Message agent wants to use the 'Local products' kenchain. "is appearing on the screen and ask for Keychain password password.  This started after I changed the password of Apple resulting for the purchase of a new iPhone.

  My iPhone 5 has been damaged and the screen was not visible.  As a result, I couldn't open the iPhone.  I bought 5 s iPhone and when I got to connect with the iCloud

  I remember the answers to security questions.   The seller must change the password and enter new answers to security questions, I did.  This happened in Bangalore.  When I'm home in Ernakulam, Kochi (India), where I has the Air of Mac, Ipad and my wife had another iPhone and laptop computer Dell, these problems began to come up on the screen and blocks the screen.

  Four Messages are appearing: the first is on the top.

  Other messages are:

  2. ' cloudd wants to use the kenchain 'local products '. '

  appearing on the screen and ask for Keychain password password.

  3. ' com.apple.iCloudHelper.xpc wants to use the kenchain 'local products '. appearing on the screen and ask for Keychain password password.

  4. ' cloudpaired wants to use the kenchain 'local products '. ' is appearing on the screen and ask for Keychain password password.

  It of an upheaval and please suggest how to solve this problem

  Hello remy!

  I see that you are either prompted by iCloud Keychain with various alert messages.  I know it's important to have iCloud Keychain works correctly and I am pleased to offer you an article that should help you.  Please follow the instructions in the following support article:

  If your Mac keeps asking for the password in the keychain

  Thank you for using communities of Apple Support.

  See you soon!

• Upgrade SSD and allowing the UEFI again after you install Windows 8

  Hi, having a problem w / install Windows 8 on 128 GB SSD using boot inherited (to easily boot from CD/DVD) and then return to UEFI boot sequence. Model is Dell Inspiron 17r SE. I'm absolutely not an expert on the terminology and technology, so I hope that I am using the correct terms. I removed the 1 TB disk that was originally shipped w / to settle more easily. I am able to install correctly to win 8 to the new disk (using a disc Dell win 8). After I reboot and try to come back back in the UEFI, I get a reboot constant return to the menu of the BIOS/legacy/Windows, UEFI, parameters, Diagnostic Boot Manager. Windows 8 will start only if Legacy option or boot first hard drive is selected. I DO NOT have the msata SSD, so my problem is not in the driver problem intel matrix (or whatever it's called).

  I looked at the PDF of installation of windows 8 in the wiki and forums and basically tells you to put the computer in legacy mode and install Windows 8, it does not say you can return to the UEFI boot. The only thing I do not according to who download drivers SATA on USB/add iso and loading them to install. That would be the question? I wouldn't guess.

  I have also tried to hit SHIFT + F10 to install and enter Diskpart, select disk 0, Clean, convert the GPT and exit and then the installation. No change. Am I supposed to completely install Windows 8, go back to install the drive, do the SHIFT + F10 sequence and then install then it would convert my GPT disk? I would assume install Win 8 would like to ask if you had UEFI and law/format accordingly.

  Questions or comments, please let me know. I would like this mode to get started more quickly. It's fast now through the bios boot, but I wish it were through the UEFI.

  When you use the legacy mode to install Windows 8, your setup application assumes that you want to format the SSD as a MBR disk.  That's why your system keeps jumping from UEFI.  Try to remove your current partitions (the disk must be empty to start), change your mode UEFI system configuration option and using the F12 boot menu a time.  Your computer must have an option on this menu to start your DVD/CD drive UEFI mode.  When you reach this point, remember to select the option to format the drive as a GPT disk.  UEFI mode can manage data the MBR and GPT disks, but if you want to start to UEFI, I'm sure the system drive must be a GPT formatted the player so that there the UEFI boot blocks.

• After you install Windows XP service pack 2 on my computer the disc cd player no longer works. In addition, my printer will not work.

  • After that I put a disc in the drive it will reopen its doors.
  • I get no response when I try to print, as many ways as I can think, I used.

  If you go to the computer mftr's site. and looking for drivers for your specific model computer, they will be good. If there is a choice (as it often is with Dell machines for example), if you happen to download the wrong driver he just would not install or wouldn't work. No grand. But given that your computer is running, open the Device Manager and write the names/models of your hardware first. Then you'll know if you have an Intel card or a wireless Dell (for example). If the update of drivers will solve your problems I can't say because obviously I can't see and test your computer for myself. But it should not damage the computer. If you're worried, take the machine to a competent local computer tech (not a type of BigComputerStore/GeekSquad of the place) and have them tested and secure it. MS - MVP - Elephant Boy computers - don't panic!

• Windows 7 ask for a password, but there is no password area

  My laptop Windows 7 Starter was once an admin password, until I removed it. Now, every time I try to make everything about the admin it gives me the pop-up box and asks for the admin password, but it is not a place where I can type in it, let alone is not a password.

  I'm the only person who uses the laptop. I can access my account very well.

  I think that it could be antivirus software on the laptop, but I can not remove it without the admin password.

  Help, please.

  Hi Chacko,

  Thanks for posting your query in Microsoft Community.

  I understand that you receive the prompt to enter the password and does not not the password field. I'll be happy to answer your query. Let me ask you;

  • Are you referring to sing-in or password while accessing a particular program, page, window, setting?

  Since you had deleted the password, there could be several other reasons, including viruses as well as for this cause. From now on, I would suggest trying the following steps and check.

  Step 1: Start the computer in safe mode and check if you either get the password field or not at all.

  Please refer to: , start your computer in safe mode

  Step 2: If things are going very well, put the computer in a clean boot state and check.

  To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  Place your system in the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

  How to perform a clean boot in Windows

  Note: see 'How do I reset the computer to start normally after a boot minimum troubleshooting' to reset the computer starts normally after troubleshooting.

  Step 3: Run Microsoft Safety Scanner

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  Microsoft safety scanner

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• HP Envy 17 t-j100: where is beats? And the sound is bad after you installed windows 10

  So I installed windows 10 when he pulled out a few months back. When I install my audio beats is completely left! As this laptop is shipped with it. He was the symbol engraved on it so the reason that this laptop was so expensive in the first place with audio beats adding (I know that Hp has probably had to buy the rights or something and so increase the price). That being said, my audio beats went and my sound is too bad. As the volume is low (yes I made sure it's not muted and checked my sidebar, you know one next to the time on the screen and also the video player or the music I listen too and also the audio Manager but nothing is). Also, my audio changed too. It used a different name that according to me, but after the update is "IDT High Definition Audio CODEC". I've also updated my driver, but even once, nothing worked.

  Hello

  Try the following.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp63501-64000/sp63555.exe

  When finished, press and hold the Windows key and press R

  In the run window, type devmgmt.msc and press to enter.

  In Device Manager, expand sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you are finished, download and reinstall the Chipset driver at the following link.

  http://ftp.HP.com/pub/SoftPaq/sp63001-63500/sp63408.exe

  When the reinstallation of Chipset is finished, stop the laptop.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f9 to load the default values (sometimes it is f5, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  When windows has reloaded, open your download folder, right click on IDT Installer and select "Run as Administrator" to launch the installation.  When he finished, restart the computer again and let windows to load completely for a few minutes before checking it in.

  Kind regards

  DP - K

• After you install windows, 10 (v.13.3.2.35) cannot connect to my iphone iTunes 5. No help available?

  After you have installed windows 10 on my laptop, I lost the ringtones I had installed on my iPhone 5 (iOS 9.2) and recorded in my book, nor can I install them again because (v.13.3.2.35) iTunes could not connect to my iPhone.

  Try the following:

  1. Open Control Panel > Device Manager
  2. Plug in your device
  3. Locate Universal Serial Bus Controllers > Apple Mobile Device USB Driver
  4. Right-click and select software update of the driver...
  5. Click Browse my computer for driver software
  6. Go to C:\Program Files\Common Apple Mobile Device Support\Drivers or
     C:\Program Files (x 86) \Common Files\Apple\Mobile Device Support\Drivers
  7. Click on let me pick from a list of drivers for devices on my computer
  8. Click on Apple Mobile Device USB Driver
  9. Click Next, then close and exit the Device Manager

  Or try the iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support

  If not try a complete tear down and rebuild in accordance with the resolution of the problems with iTunes for Windows updates.

  TT2

• After you install Windows XP on my system, I can't activate any key in this regard.

  Work with multiple Codes are not valid on my computer.

  I recently installed Windows XP Professional SP2 on an old computer in my company office. When it was over, I started windows update and I was told that my key is not valid. I went into regedit and changed the OOBETimer so that I could enter another code, activate Windows using, I received from winkeyfinder on another computer in the company. This key was supposed to be invalid, so I asked my boss. He used winkeyfinder on his computer and had the same winkeyfinder key returned on another working computer. Then, he contacted an old workman and got two more known keys to work. After entering the Windows activate both would also be invalid. Any ideas?

  I recently installed Windows XP Professional SP2 on an old computer in my company office. When it was over, I started windows update and I was told that my key is not valid. I went into regedit and changed the OOBETimer so that I could enter another code, activate Windows using, I received from winkeyfinder on another computer in the company. This key was supposed to be invalid, so I asked my boss. He used winkeyfinder on his computer and had the same winkeyfinder key returned on another working computer. Then, he contacted an old workman and got two more known keys to work. After entering the Windows activate both would also be invalid. Any ideas?

  If they are retail or OEM, the key can be activated on a single computer. Why di you think they can be activated on more than 1 computer at a time?

• After you install Windows XP on a new hard drive, I am unable to activate it.

  Original title: key not turn

  After put xp to new hd key entered went to the Activation Center and they disabled key how can I fix?

  original title: impossible to activate

  Hi DonWebb,

  1. What happens when you try to activate Windows XP? You receive an error message?
  2. Where you successfully able to install Windows XP on the new drive?

  Refer to the article below for more information on activation of Windows XP.

  How to activate Windows XP

  http://support.Microsoft.com/kb/307890

• How to return to my previous operating system after you install Windows 8 Preview of consumer?

  Install Windows 8 big mistake. You will need to reinstall Vista, but has a HP with no disc.

  I installed windows 8: big mistake.  Got to get back to go back to Vista, but:

  1: Windows 8 wiped my recovery partition
  2: no disc HP
  3: out of warranty so HP will not answer questions
  4: have no friend with Vista which has a disc that I can use.

  only good news:

  I have windows.old, and I saved my windows.old plus all my downloads and data.

  Right, I have TO go back to Vista,

  1: Windows 8 incompatible with all other programs I need, and that you use every day.

  I like 8 sorry it's such a disaster at this time.

  I installed windows 8: big mistake.  Got to get back to go back to Vista, but:

  1: Windows 8 wiped my recovery partition
  2: no disc HP
  3: out of warranty so HP will not answer questions
  4: have no friend with Vista which has a disc that I can use.

  I have windows.old, and I saved my windows.old plus all my downloads and data.

  In addition to reinstallation Windows of information below, you can also try this, if you have the Windows.old folder to restore your previous Windows installation:
   
  Return to a previous system Windows using Windows.old:
  http://support.Microsoft.com/default.aspx/KB/971760
  Note: If you had installed Windows 7, follow the instructions for Vista

  Please note: you cannot uninstall the preview of consumption. To return to your previous version of Windows, you will need to back up your personal files, and then reinstall Windows from the installation or recovery media and reinstall your programs.
   
  For more information - Windows 8 consumer overview FAQ:
  http://Windows.Microsoft.com/en-us/Windows-8/FAQ

  Reinstalling Windows

  HP - order of the recovery disc for Windows 7

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?objectID=c00810334

  HP - restore the PC to its original state with the recovery disks:

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?objectID=c00809678#RestoreWithDiscs

• Error message! OXC190036! 4319/76322 (mscorsec.dll) after you install Windows Vista service pack 2

  I tried to install Windows Vista Service Pack 2 last night (after it has automatically updated several days ago) and it appeared to get 100% up-to-date point and he said of without shutting down your computer.  I left the computer for a while and I think it has restarted and it got stuck on this message! OXC190036! 4319/76322 (mscorsec.dll) for about 2 hours before I turned it off.  The message is still there when I try to restart and recovery mode is not able to help. Any suggestions? (It's a HP laptop on a 1 1/2 years and ran very well until now)

  https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until August 30, 2010.

  Microsoft free support for Vista SP2 at the link above.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows says no audio output device after you install windows 8 pro in my desktop computer.

  * Original title: sound problem

  After you have installed windows 8 pro in my desktop my windows says no audio output device is installed, I am already updated my audio driver in Device Manager, but its cant work, I'm also controls to restart windows audio in services.msc you please try to help me solve this problem

  Hello

  Press the Windows key + R to open the run

  Type dxdiag

  Click Ok

  Click on the sound tab

  If the drivers have been omitted you won't see a name only no Loaded device

  If you do not see a charge device click Test DirectSound

  If the Director plays with sounds, but you can not hear, check your speakers that can be turned off, disconnected, or broken.  Verfy pregnant are very good.

  Click Exit

  If the speaker is fine, go to the website of the manufacturer of your sound card and search for updated drivers.

  Download and install the drivers.

  Return to the screen of dxdiag and repeat the test for sound

  Click on the help tab if still problems

  Windows will guide you through more tests

• Several problems after you install Windows XP on TE2100

  I have a TE2100 and then I put in place the new operating system windows xp professional after finish I open window but not display full right is missing about 1 Inc. (upper left butom OK full) I search the device have yellow question mark '? ' "PCI Device" device
  How can I do it please tell me. Original card on Nvidia Geforce 4 220 (I don't remember)

  I have problem to even some bodies in the forum is the member name Stockcar44 you can watch on my link:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=31914&TSTART=0

  I'm sorry for not good English because I'm Thailand people

  Thank you for all

  Man, I'm sorry, but that is not acceptable you ask a question, post a link that contains the answer to your problem and ask what to do.

  I can only tell you what is written in the you´ve link posted: check the BIOS if "full screen" is enabled and updating your Videodrivers.

  That will solve your problem.

  See you soon

• It does not start after you install windows 7 on an SSD without going into the bios and clicking on the reader.

  Will change the bios fix it?  If yes how?

  CharlesR salvation,

  This concern is usually caused by an incorrect configuration of the BIOS of your device settings. If you have recently installed Windows 7, then most likely the boot priority is always set to the optical drive or USB (depending on which you have used in the installation of Windows 7).

  The BIOS settings are dependent on the manufacturer of your device, this is why we invite you to contact the manufacturer of your device for assistance by changing its settings.

  Kind regards

  BIA of Hamilton

  You can use the mark as answer button, if this post responds to your request.