After you rename the directory of missing files

Similar Questions

• After you rename a folder full of files using LR CC, I now have two of each DNG file with consecutive numbers providing unique names!

  After you rename a folder full of .dng and. MOV files using LR CC, I now have two of each file DNG image with consecutive numbers providing unique names. . MOV files are not affected. Activated with "Bridge" and found it said one is one Mac Application, either in the form of windows. I have Lightroom on Mac and Windows PC with local catalogues which are clouds synchronized (but never on at the same time). Could be the cause of this problem? It is possible that differ from the Mac and Windows version catalogs and their creative together via the Cloud technology synchronization can cause this duplication is obvious when all files are renamed by using a number of automatic sequence?

  Yes, my default sort criteria is by file name as my beginning of file names with a reverse date followed by a sequence number. I think at some stage I must have reproduced all the files on the Windows PC and saved with a different range of sequence numbers after the element of date filenames outside of LR. Sometime later I have imported in the Lightroom. When I decided to rename all of them using this naming convention, I discovered the duplication hiding behind different file names. This turns out to be a lesson on the practices of workflow systems.

• DB does not open after you rename the name of the database

  Hi all
  
  I tried to change the name of the db, so I created new controlfile trace and set it as. I created controlfile successfully, my open db with success, but when I stopped and tried again to open it I saw the below error message
  
  
  
  CREATE CONTROLFILE SET DATABASE 'db2' RESETLOGS NOARCHIVELOG
  MAXLOGFILES 16
  MAXLOGMEMBERS 3
  MAXDATAFILES 100
  MAXINSTANCES 8
  MAXLOGHISTORY 292
  LOGFILE
  GROUP 1 ' C:\ORACLE\PRODUCT\10.2.0\ORADATA\db2\REDO01. NEWSPAPER "SIZE M 50,
  GROUP 2 ' C:\ORACLE\PRODUCT\10.2.0\ORADATA\db2\REDO02. NEWSPAPER "SIZE M 50,
  GROUP 3 ' C:\ORACLE\PRODUCT\10.2.0\ORADATA\db2\REDO03. NEWSPAPER "SIZE M 50
  -STANDBY LOGFILE
  DATA FILE
  ' C:\ORACLE\PRODUCT\10.2.0\ORADATA\db2\SYSTEM01. DBF',.
  ' C:\ORACLE\PRODUCT\10.2.0\ORADATA\db2\UNDOTBS01. DBF',.
  ' C:\ORACLE\PRODUCT\10.2.0\ORADATA\db2\SYSAUX01. DBF',.
  ' C:\ORACLE\PRODUCT\10.2.0\ORADATA\db2\USERS01. DBF',.
  ' C:\ORACLE\PRODUCT\10.2.0\ORADATA\db2\DB2. DBF',.
  ' C:\ORACLE\PRODUCT\10.2.0\ORADATA\db2\DB21. DBF',.
  ' C:\ORACLE\PRODUCT\10.2.0\ORADATA\db2\DB211. DBF',.
  ' C:\ORACLE\PRODUCT\10.2.0\ORADATA\db2\DB212. DBF',.
  ' C:\ORACLE\PRODUCT\10.2.0\ORADATA\db2\DB213. DBF',.
  ' C:\ORACLE\PRODUCT\10.2.0\ORADATA\db2\DB214. DBF',.
  ' C:\ORACLE\PRODUCT\10.2.0\ORADATA\db2\DB215. DBF'
  WE8MSWIN1252 CHARACTER SET.
  
  ALTER DATABASE OPEN RESETLOGS;
  
  
  
  
  SQL > @e:\creatdbdb2.sql;
  
  Created control file.
  
  
  Database altered.
  
  SQL > select file_name in dba_data_files;
  
  FILE_NAME
  ---------------------------------------------------------------------------
  C:\ORACLE\PRODUCT\10.2.0\ORADATA\db2\DB215. DBF
  C:\ORACLE\PRODUCT\10.2.0\ORADATA\db2\DB214. DBF
  C:\ORACLE\PRODUCT\10.2.0\ORADATA\db2\DB213. DBF
  C:\ORACLE\PRODUCT\10.2.0\ORADATA\db2\DB212. DBF
  C:\ORACLE\PRODUCT\10.2.0\ORADATA\db2\DB211. DBF
  C:\ORACLE\PRODUCT\10.2.0\ORADATA\db2\DB21. DBF
  C:\ORACLE\PRODUCT\10.2.0\ORADATA\db2\DB2. DBF
  C:\ORACLE\PRODUCT\10.2.0\ORADATA\db2\USERS01. DBF
  C:\ORACLE\PRODUCT\10.2.0\ORADATA\db2\SYSAUX01. DBF
  C:\ORACLE\PRODUCT\10.2.0\ORADATA\db2\UNDOTBS01. DBF
  C:\ORACLE\PRODUCT\10.2.0\ORADATA\db2\SYSTEM01. DBF
  
  11 selected lines.
  
  SQL > shutdown immediate;
  The database is closed.
  The database is dismounted.
  ORACLE instance stops.
  SQL > startup;
  ORACLE instance started.
  
  Total System Global Area 612368384 bytes
  Bytes of size 1250428 fixed
  222301060 variable size bytes
  381681664 of database buffers bytes
  Redo buffers 7135232 bytes
  Mounted database.
  ORA-00313: open failed for the members of the Group of newspapers wire 2 1
  ORA-00312: wire 2 1 online journal:
  'C:\ORACLE\PRODUCT\10.2.0\DB_3\DATABASE\LOG2db2.ORA '.
  ORA-27041: could not open the file
  04002 - OSD: could not open the file
  S/O-error: (OS 2) the system cannot find the file specified.

  845470 wrote:
  control_files string C:\ORACLE\PRODUCT\10.2.0\DB_3\
  DATABASE\CTL1NIRAJ. ORA

  I guess, you create controlfile as the directory of log files "C:\ORACLE\PRODUCT\10.2.0\ORADATA\db2\".
  So now, you will need to change pfile to again match controlfile.

  sql>create pfile='c:\pfile.ora' from spfile;
  

  Change the section of the command file "c:\pfile.ora" to match your NEW control file.
  then start DB, using the new file pfile

  sql> startup mount pfile='c:\pfile.ora';
  

  Check the locations of the data file and log files from views v$ datafile and v$ logfile.

  If everything is ok - open the database and create spfile

  sql>create spfile from pfile='c:\pfile.ora';
  

  Published by: Nikolay Ivankin on 23.03.2012 11:23

• After you rename the computer, the backup of the file history still showing the old name of the computer to its destination.

  Original title: history of Falie Worng Destination path

  I changed my computer name [my computer setting and the name, display name, computer and computer Description all equal under the same name]. But when the history of files backing up my files, he insists on putting the OLD computer name in the backup destination path, for example:

  Backup_Drive\\Backup_Folder_A\UserID\Old_Computer_Name\Data...

  I tried selecting a new backup drive and reboot several times, but the history of files always comes back to the old name of the computer when you create the destination path.

  How can I fix?

  Similar to the response of Siva here, you will want to return to

  C:\Users\\AppData\Local\Microsoft\Windows\FileHistory

  Now, if FileHistory was lit before, using the old username, there will be a configuration file and the Config1.xml and Config2.xml files will contain several tags using the old name of PC. Rather than wipe these files, open each file in Notepad and search for the name of your old PC and replace with the name of the new, do not forget to save.

  In addition, if you want to keep a backup that has already been created with the old name of PC, you'll need to find, rename the main folder ("old name PC") and in this folder, rename tags in the Web configuration files (as you did in the local configuration files).

  When I tried to delete my local config files, he would recreate using files of configuration of the backup, that were also incorrect, so I just manually renamed and mine works fine now under the new name of PC.

• Distortion after you convert the wav to mp3 file

  Hello

  I work with a sampling frequency .wav file 8 k, 16-bit, mono a Skype conference call that was recorded by the computer. Wav is ACM Microsoft file: Microsoft ADPCM. The audio quality of the original is not optimal, as you can imagine, but when I do my changes and convert to mp3 that sounds horrible. I don't know the technical term for it, but it sounds muffled and distorted - the effect you get when cut you your hand in front of the mouth and the move while speaking. I am at a loss for what to do. Is there a setting I need to change before conversion? I know it's a sampling rate low (I usually work with 44.1 K), which would contribute to the problem?

  Any help is greatly appreciated!

  Thank you.

  In a quick test, I was able to get significantly better results with an 8K, 16-bit source conversion to MP3 when you change the MP3 setting to 16 kHz.  In the file > save as dialogue, after selecting the MP3, click on the button 'Edit' next to 'Type of sample' and change the sampling frequency.  The file size was virtually unchanged, but the audio quality has been increased and by looking at the two files in spectral view showed a marked improvement.

  Edit: Oops, I answered by e-mail and didn't know that this has been posted on the forum Audition 3.  I suspect the results will be even better with the 3 MP3 encoder - both are by Fraunhofer.  Here were the differences I've seen when writing 8 k 16 K vs.  The resulting file is 29KO in both cases.

  

  MP3 recorded to 8K sampling frequency setting

  -------------------------------------------------------

  

  MP3 recorded at 16K sample rate setting.
  

• Necessary troubleshooting after you rename the parent folder

  Recently, I renamed some files from the month to the 00 month (i.e. from January to January 01) and moved this month RAW files in a subfolder for this shoot.  The bad news is that I forgot to do in Lightroom!  Usually I choose a photo, update its location, and it syncs all the other photos in this folder.  However, something went wrong.  Whenever I try to add a link to the photo, it says the name of the file is different from the one chosen, and I want to continue.  File names have been changed already and just the sub and parent folder.  This means that I have to do each photo one at time and a few hundred to re link. I have tried to right click on the parent folder and select the location of the update folder and file (wants to import photos as if they were never in the catalogue) synchronize any suggestions to fix this?

  

  Adding spaces before the name of the file using Lightroom did indeed cause a space to be present in both the file name as shown in Lightroom and the file name as shown in Windows.

  And the problem remains that your file in Lightroom names do not seem to match the names of files in Windows.

• User_sub_partitions data dictionary not updated after you rename the partition but user_tab_partitions is

  Hello

  Using oracle 11.2.0.3

  Date range poartitioned 1 partition for each month and 4 separate secondary partitions for each month.

  and executed suite

  ALTER table retailer_transaction rename partition SYS_P64937 tablespace PART_201505;

  ALTER table move subpartition SYS_SUBP64933 tablespace RTRN_PART_201505 retailer_transaction;

  ALTER table move subpartition SYS_SUBP64934 tablespace RTRN_PART_201505 retailer_transaction;

  ALTER table move subpartition SYS_SUBP64935 tablespace RTRN_PART_201505 retailer_transaction;

  ALTER table move subpartition SYS_SUBP64936 tablespace RTRN_PART_201505 retailer_transaction;

  ALTER table retailer_transaction change the default attributes for the partition PART201505 tablespace RTRN_PART_201505;

  Check user_tab_partitions and now to see nom_partition like PART_201505 but when check user_tab_subpartitions

  a still 4 secondary partitions with a score of SYS_P64937 name

  Why is this and how do you ensure user_sub_partitions corresponds to user_tab_partitions?

  Thank you

  user5716448 wrote:

  Thanks for the reply.

  Œuvres by renaming the index partition as suggested.

  However, one last problem to try to rebuild the local bitmap index that is marked as UNUSABLE for the affected partition is ORA-14287 cannot rebuild a partition of a composite range partitioned index.

  ALTER index RTRN_SAS_IDX PART_201505 rebuild partition;

  How we can rebuild the local bitmap index to ensure it can be used - would not want to delete the local bitmap index and rebuild?

  Thank you

  [oracle@localhost ~] $14287 oerr ora

  14287, 00000, "can not REBUILD a partition of a Composite range partitioned index.

  * Cause: The user attempted to rebuild a partition of a Composite range partitioned index

  which is illegal

  * Action: REBUILD the index partition, a subpartition at a time

• After you rename the data file, cannot start database

  Oracle 11 g 2
  OEL 5 (ASM)
  Network infrastructure (cluster install) - no CARS yet
  
  Something interesting happened. Perhaps this question might be more suited to the "ASM" section, but that's.
  
  I gave a data in ASM file an alias with the following command (the ASM instance):
  

  SQL> alter diskgroup DATA add alias '+DATA/oradb/datafile/users01.dbf' for '+DATA/oradb/datafile/users.253.795630487';
  
  Diskgroup altered.

  Then, as mentioned in Note: 564993.1, we need to update the database as well with the new alias. However, when I went to the stopping and starting of the database, I received the following:
  

  SQL> shutdown immediate;
  Database closed.
  Database dismounted.
  ORACLE instance shut down.
  SQL> startup mount;
  ORA-12514: TNS:listener does not currently know of service requested in connect descriptor

  It's strange. Nothing has changed except the alias being added to the data file. This is all before operation. That's happened?
  
  I think that it may have to do with the different ASMOPER, ASMADMIN, ASMDBA groups that have been installed as part of the installation of the grid Infrastructure. In addition, the listener is running out of the GI home.
  
  All my variables environment (e.g. ORACLE_SID, ORACLE_HOME, etc.) are defined.
  
  Any ideas?
  
  Thank you.

  Hello
  When you connect with tnsnames alias while the database is down the listner did not know the service, so you must start the database on the server database with sqlplus / as sysdba. After starting the registry of data base with the listener and your connection works again.
  Alternativ you can add a service to your listener.ora to connect with him while he is arrested, as long as you do not have it you must use local connect which means sqlplus / as sysdba.

  concerning
  Peter

• Root user cannot create VMS within the Resource Pool after you rename the Cluster

  Currently, vCenter manages two clusters. I renamed a single cluster and the root user seems now are not allowed to create a new Virtual Machine in resource pools to the title of the group with the changed name. I tried to change the name of the cluster to its original name... no luck.

  The root user can still create a VM under the individual cluster nodes, but not in a resource pool.

  The cluster that has not been renamed yet can be managed completely with the root user. Resource pools it allow me to create a virtual machine.

  I found this last issue and checked on each cluster node that the ACEDataRoleId is-1 for each section: http://kb.vmware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1031192

  I am at a loss, any help would be greatly appreciated! Thank you!

  I think it's a bug. When I created a new data center and migrate all nodes in cluster about him, the permissions problem I was experiencing did not follow.

  Thank you for your help.

• Firefox does not open after the update. Cannot open the profile technical, even when you use the directory in cmd line path

  I'm using Firefox on a Windows 7 computer. Firefox does not open after the last update. I read the help articles and it seems that I need to create a new profile because my settings were probably corrupted. I'm unable to open the profile technical, even when you use the directory in cmd line path. I tried the following commands in the command line:

  Firefox Pei
  "C:\Program Files (x 86) \Mozilla" PEI

  Nothing happens with every order.

  I am also running Norton Internet Security. I read a help of virtual navigation features Re article that can cause a problem. The article says to check the setting of virtualization in the internet security software and to clear the virtual cache. I went through all the menus of settings in Norton Internet Security version 21.6.0.32 and I don't see anything that looked like in "virtualization" settings, so I guess that does not apply to me. "

  If you have any ideas, I had appreaciate that your expertise!

  Hello arcandl, at the launch of the firefox is not after you double-click the shortcut, it is sometimes also a sign of active malware on a system.
  you might want to try running a scan with some various other security like the free version of malwarebytes and adwcleaner tools that are specialized to remove the adware and browser hijackers.

  Fix Firefox problems caused by malicious software

• Logging.XML file resets after you restart the managed server

  Hi all
  
  I modified the logging.xml file because I implemented a Logger.But ADF custom after you restart the server, SOA, logging.xml file get automatically back to the unmodified state, all this means that I modified was not.
  
  Am I missing something?
  
  Please suggest!
  Kind regards
  Shah

  Hi Shah
  In the EPS group, usually there is a set of Configuration files are synchronized to all of AdminServer breaks the run. A simple example is like file config.xml and some files of data sources, files, ldap, etc. Whenever we reboot the Soa or bam managed servers, they go to AdminServer and obtain a copy of these files. So, if you make any changes directly on the managed server computers, then can be is getting crushed when you restart the servers. Check the timestamp of all these files. Make the changes on the side means Admin on the machine where you have AdminServer running. If all goes well, soa/bam should get these files at startup.

  Thank you
  Ravi Jegga

• Why the highlighting of text in a PDF document does not work after you save the file

  Why the highlighting of text in a PDF document does not work after you save the file

  What application you use to highlight?

• After you change the raw file in CS6, jpeg looks dull and has weird tinge to it. I tried all color adjustments, but the result is the same throughout, jpegs of LR5 and 13 elements looks nice and consistent. How can I fix it?

  After you change the raw file in CS6, jpeg looks dull and has weird tinge to it. I tried all color adjustments, but the result is the same throughout, jpegs of LR5 and 13 elements looks nice and consistent. How can I fix it?

  Make sure the jpg has embedded sRGB profile.

  In what application you view jpg files?

  The symptoms you describe are typical of images with Adobe RGB or ProPhoto read in an application that does not support color management.

• Problem installing Webroot for MSN (part of the Internet software of MSN Premium subscription) "error 5: access is denied" and "Setup could not create the directory"C:; Program Files/Webroot/security /...

  Original title: problem installing Webroot for MSN (part of the Internet software of MSN Premium subscription)

  Try installing Webroot to MSN but when I run the installer, I get "error 5: access is denied" and "Setup could not create the directory"C:; Program Files/Webroot/security/current/plugins/antimalware/Backup ". OS is XP with Service Pack 3. I tried to delete my existing Webroot program and turning to the bottom/off other security options... Any suggestions? Thank you.

  Thanks for the reply. I was able to finally get the new Webroot program to install after running a Microsoft Fix affecting the directory uninstall the old prgm Webroot and meets a new error code (1603), which led me to this site to permissions Grant full control to the SYSTEM account.

  http://support.Microsoft.com/kb/834484

• How to rename the directory to DATABASE_B in ASMCMD DATABASE_A?

  Hi all
  
  I need to rename the database CURRENTLY [size 500 GB] of DATABASEB, that uses ASM filesystem. If I try to copy the files from the directory ' + DATA\DATABASEA\datafiles\ * ' to + DATA\DATABASEB\datafiles\ * ' his required too much time and thus increase the load on the server.
  
  
  So please let me know is possible to rename the directory in the ASMdisk group.
  
  
  Thank you

  Updated with step by step above updated post.

  Levi Pereira