AFX freezes for 5 seconds when switching between first and AFX

Similar Questions

• X201i (3249 CTO): screen becomes a second when switching between battery, power supply

  So I had this problem since I put on the coming computer straight out of the box of Lenovo. Everything else works fine, but every time I'm leaving battery current alternative (or vice versa) the screen changes immediately brightness according to my settings and then turns off completely for 0.5 to 1 second before it is again and everything is back to normal. Happens EVERY time, so it is a permanent, 100% recreatable (and recurring) problem.

  I googled for a solution, but all I found is on updating drivers and uninstalling the software - which are not applicable on this machine. All the drivers are up to date and I have no installed software problems. Everyone knows what could be wrong or, more importantly, how to fix this?

  First I thought it was a problem of having a LED screen (I have experience only LCD screens), but it is not logical for me. I'd appreciate it really answers and suggestions for this annoying problem.

  FYI, I'm on a X201i (3249 CTO) with Win 7 home premium 64-bit.

  Super thank you!

  Note from Moderator: Edition subject to the content of the game.

  
  

• Resolution of screen changes back back when switch between Yosemite and Fusion 7

  Upgrade to Yosemite on my MacBook Pro has forced me to also upgrade to Fusion 5, who had been very stable and problem free. Unfortunately, I knew a behavior very boring to the resolution of the screen in my virtual session of Windows 7, when I toggle between Yosemite and the virtual partition of Windows 7. Any time that make a screen resolution change and change over on the side of Yosemite, when I return to Windows 7, the resolution returns to the default setting of 2880 X 1800, which requires a magnifying glass to see! Does anyone else know this? I couldn't find a thread discussing this problem, but I know that yosemite is new.

  In addition, since it is clearly a bug, can someone tell me the best way to report it to VMWare? I'm sure they want to know about the bugs, but I don't know the best way to report them. They were very helpful when I discovered how hard this upgrade to Yosemite before checking to see Fusion 5 was consistent (if not) was a mistake on my part - they got me on track, and even if it's a bear to learn how to get a live person on the line with VMWare site Once I did, I finally got a guy who nailed - Kudos to their technical support for this team.

  Glenn

  Hello Glenn

  Try to disable the support of the retina by going to

  1. Virtual Machine menu > settings > display. Uncheck the use full resolution over Retina display.

• Reset the workspace when switching between laptop and external monitor

  Is there a way to have my work space reset itself (or better yet change between two workspaces) when I pass between my laptop and my external monitor to my office. Adobe likes to crush my workspace in a sea of useless, mutilated pallets when I leave my office. There at least had the kindness to put it when I get back.

  I realize I can manually reset and I even put in place a combination of keys, but I don't see why he can't do it on its own. Or better yet, stop blend it upward in the first place.

  Unfortunately, I think it's an OS and PS reacts only to have to resize it to another monitor.

• Why the relative values of RGB and CMYK will not change when switching between Photoshop and InDesign?

  I'm trying to put together a Guide to color for my company's brand guidelines.

  Initially, I worked for InDesign and copied all H, RGB and CMYK values that I had when I went in an eye my original color palette.

  However when I put the same values of RGB in Photoshop I gives me a (somewhat) a different set of CMYK numbers than I had initially documented in InDesign.

  Why is this?

  JamieCurtis5 wrote:

  It makes me feel a bit nervous leaving aside CMYK all together...

  CMYK is essential for a company's brand guide. The printer ask again, it's a simple and direct question. If they cannot answer this fundamental question, that speaks well of their professional standards. It is a common practice and highly standard procedure. I do it all the time (and get answers directly in the world).

  That said, if this guide in general and not necessarily related to this particular printer, it might be preferable, specify a profile which is commonly used as a general practitioner in your area. It depends on where you are. Here in Europe, it would be either Coated FOGRA39, ISO Coated v2 300% (eci).

  In the United States, I guess us Web Coated (SWOP) v2 would be on a list, not because it's necessarily just for the purpose, but simply done to be the default Photoshop. Printers must get loads of the present. Same here in Europe, where this profile is never used any where, a lot of people use it just because it is the default value of the PS and it never gets turned into something more appropriate.

• First Pro crashes when switching between applications

  Hi all

  I edit with Premiere Pro on a Mac Pro running OS X 10.10.2 cylinder (3.5 GHz 6 - Core Intel Xeon E5, 16 GB 1866 MHz DDR3 ECC, over-pants D500 3072 MB), when I connect the images with Excel, I noticed after some time switching between Excel and Premiere Pro or all the other apps, first Pro STILL crashes with the error serious.

  
  

  Project is very disappointing and frustrating that you need to open the recovery file, creating another file and have to get timecode all over again, lost a lot of time to. Expect First pro to work smoothly on a Mac Pro.

  Anyone have a similar experience or know a solution?

  Thank you

  L

  29/03/2015 07:19:23.457 com.apple.xpc.launchd [1]: (com.adobe.AdobePremierePro.66488 [4527]) Service was released due to the signal: Segfault: 11

  Here is my complete crash report:

  https://www.dropbox.com/s/08igd5s3s6evquv/Adobe%20Premiere%20PRO%20CC.txt?DL=0

  Process: Adobe Premiere Pro CC 2014 [4527]

  Path: / Applications/Adobe Premiere Pro 2014/Adobe Premiere Pro 2014.app/Contents/MacOS/Adobe first Pro 2014 CC CC CC

  ID: com.adobe.AdobePremierePro

  Version: 8.2.0 (8.2.0)

  Code type: X 86-64 (Native)

  Parent process:? [1]

  Responsible for: Adobe Premiere Pro CC 2014 [4527]

  User ID: 501

  Date/time: 07:19:22.403 2015-03-29 + 0100

  OS version: Mac OS X 10.10.2 (14-1514)

  Report Version: 11

  Anonymous UUID: D42F2CB9-98B4-C04E-E594-A17C39AC5324

  Sleep/wake UUID: B58E8A4B-751B-4568-925F-D3E9E1130B43

  Time since started awake: 13000 seconds

  Wake time: 4000 seconds

  Crashed thread: 0 dispatch queue: com.apple.main - wire

  Exception type: EXC_BAD_ACCESS (SIGSEGV)

  Exception codes: KERN_INVALID_ADDRESS at 0 x 0000000000000000

  Hello world

  I dug deeper reading crash log, and discovered that the reason of my crash is primarily due to the confusion of audio output my mac has as he move from an internal speaker and speaker output and causes the crash. Since I had bought a DAC (digital-to-analog converter) and set the audio output of the DAC first and have no accidents since then. It will be useful.

  L

  ---

  Thread 0 crashed: Dispatch queue: com.apple.main - wire

  0 com.adobe.AudioSupport.framework 0x0000000103d7f8d0 ML::Device:GetNumberOfPhysicalChannels(unsigned_int,_bool) + 80

  1 com.adobe.AudioSupport.framework 0x0000000103d6adb8 ML::CoreAudioHost:PrivateInitDriver(std::basic_string____,_dvacore::utility::SmallBlockAllocator::STLAllocator_ _>_const&) + 712

  2 com.adobe.AudioSupport.framework 0x0000000103d6a18f ML::CoreAudioHost:LoadDriverPrivate(std::basic_string____,_dvacore::utility::SmallBlockAllocator::STLAllocator_ _>_const&,_bool,_bool) + 351

  3 com.adobe.AudioSupport.framework 0x0000000103d6dac1 ML::CoreAudioHost:LoadDriver(std::basic_string____,_dvacore::utility::SmallBlockAllocator::STLAllocator_ _>_const&) + 33

  4 com.adobe.AudioSupport.framework 0x0000000103d7b348 ML::CoreAudioHost::AddDependancy() + 56

• Trails of the icon when switching between desktops in the Sierra

  I noticed some display problems since the update for Sierra. I see some trails icon when switching between desktop computers as well as a line of 1px of random colors on the right side of the screen seems to be leftover pixels for the desktop switch as well.

  Here is a screenshot: https://cl.ly/hegc

  Here is a video showing the paths of the icon: https://cl.ly/hef9

  Any other light this or know how to fix? It's rather annoying.

  Thanks in advance,

  Brent

  Hello Brent Spore.

  Thank you for reaching out to the Community Support from Apple. I know how it is important to keep your Mac running properly, and I want to help him.  Whenever we see the behavior as what you described, it is a good idea to test the symptoms in a separate user in safe mode. This will help us determine if the remanence of the icon is linked to a problem with the user account or if it's a question broad system. The articles below will guide you through these steps.

  How to test a question in another account on your Mac.

  Try safe mode if your Mac does not end commissioning

  If the ghost still occurs in safe mode, then we know it is a question broad system and I would recommend backup your Mac and Mac OS re-install using recovery, as described in the articles below:
  

  Use Time Machine to back up or restore your Mac

  How do I reinstall macOS

  If the behaviour continues or if you encounter difficulties, the entire community is here to help.

  Best regards.

• Combustion chamber is very slow when switching between tabs, the legs more slowly, he gets, switching between the windows of Firefox is almost instantaneous.

  In this case all that is display of each tab. For example, if I open it, say, 8 new tabs by default it takes about 5 seconds to switch between them, although all that they show are links to my sites top of page 9. I also noticed a new tab opening takes more time more I already opened. The problem is particularly well with the tabs. Navigation is not just slower than usual and as I said above, switching between Firefox Windows in not affected.

  If it works in Mode safe mode and normal mode with all extensions (Firefox, Tools/menu key > Modules > Extensions) off and then try to find which extension is the cause by allowing an extension at a time until the problem reappears.

  Close and restart Firefox after each change via * button '3-bar' menu > exit (Power button)

  • Windows: File > Exit
  • Mac: Firefox > quit Firefox
  • Linux: File > exit
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• Rearrange the spaces when switching between applications

  When switching between apps spaces can reorganize, which is disturbing for users with specific workflows. For example, right now I have 6 places with different applications in each, and I have these in a specific order. However, since upgrading to El Capitan, I find continues to reorganize themselves. I can reproduce this by opting for an application by opening a window in a non adjacent space. For example, I have a window open in 4-space and I am consulting a window in space 1. If I pass this request, space 4 will be moved to position 2. It always seems to move space to the next position to the right of the current space. I can reproduce this reliable either by opting for an application by using cmd - tab, or if I have multiple windows for a single application running in more than one space, using app expose.

  Djroshi,

  My office reorganise themselves once the screen saver is running can provide you with some tips to change this behavior.

  

• I have a problem with the mouse cursor moving left to right and not conversely when switching between screens.

  Original title: change the direction of the mouse moves from the main screen to the external monitor

  My mouse movements from left to right when moving from one screen to the other, I want that he move right left how do that change

  Hi Jayson Bourne,

  Welcome to the Microsoft community. According to the description of problem cursor mouse moves from left to right and not vice versa when switching between screens. Provide the following information:

  ·         Did you do changes on the computer before the show?

  ·         You get the error message?

  ·         What is the brand and model of the mouse?

  I'll help you with this problem. I suggest you follow these methods.

  Method 1: Follow the steps in the article.

  Change the settings of the mouse

  Method 2: Update the latest drivers/software for the mouse.

  Updated a hardware driver that is not working properly

  I hope this helps. Let us know if you need help with Windows related issues. We will be happy to help you.

• Delicate design adds huge empty space when switching between breakpoints

  Hello

  On my site: http://mannyrothman.com . For some reason any in the browser when switching between breakpoints (mobile office and back on desktop) a large white space appears between «for professional content...» ' And 'contact'.

  What is going on? Is this a bug of Muse or do I set my breakpoints incorrectly?

  Thank you!

  Hi Manny,

  Your HTML widgets at the top of your page are the cause. Interestingly, it seems to be the "Flipping Transitioner V5" widget which is triggering problems. When I remove this Widget, page exports and behaves properly. With only this widget on the page, he begins to develop, then corrects herself. My recommendation is to study with MuseResources.com why this widget is causing this bug.

  Thank you

  Dana

• It takes up to 4 minutes for the player switch between library and Rip, and vice versa.

  I run Media Player 11 on my XP machine with spare 120G on the C: memory and 3G - recently, it takes up to 4 minutes for the player switch between library and Rip, and vice versa. I have re-installed twice but no change. No new software has been installed before this time.

  Hello Absno69,

  Thank you for your message.  You mentioned that there were no new software installed before that happens.  Were there any hardware changes or updates?  If this isn't the case, we will perform a system restore to a point that you know that your system is working effectively.  Click HERE for the system restore instructions.
  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• PS CC load and freezes for 45 seconds before anything can be done.

  PS CC load and freezes for 45 seconds before anything can be done. Even the red x in the upper right is frozen during those 45 seconds, then everything is gone. I'm running on Windows 7 Professional with 32 GB of ram.

  It makes no difference if the GPU is enabled or disabled.

  Can anyone help?

  Thanks in advance

  Paul

  Hi raffeld,.

  I suggest you to please disable the Welcome screen and also do you have images in the library of Photoshop or not?

  Kind regards

  Tanuj

• How to get a dialog/pop up when switching between PanelTabbed ShowDtlItem

  I have an obligation to ask the user through a dialog/pop up when switching between PanelTabbed ShowDetailItems (if he really wants to move to another tab).
  How can we achieve this?
  Framework provides all the methods?

  Hello

  Since you have to remove the switch tab, I think you should try an af:clientListener, and then cancel the click event and display the context menu. If the user confirms the switch, manually set the property disclosed on the showDetailItems that you want to display and the panetabbed componnent ppr

  Frank

• Switching between microphone and line-in in the Realltek Sound Manager

  Ok.
  Now I know where the Realtek Sound Manager, and I can control the parameters of the microphone and speakers.
  But how can I switch between microphone and line-in?
  At the moment I don't see a line of component option snap at all. Is it because it's a kind of auto detect and the opportunity every time I connect something?
  Everyone knows this, or has some experience in this regard?
  Cordially in advance
  Frans

  Sorry but I don't understand what exactly you want.
  You have built in mic or you can use the external microphone connected to the mic-in port.
  When the external microphone is connected a resident will be disabled.

  The question is: what do you want exactly and for what purposes? Please explain what is the reason for this switching between mic and line-in port?