Age of Mythology works on VISTA? whenever I download it it says that the file has not been downloaded correctly... Help, please!
I tried to install age of Mythology on several occasions and it will start to play, but right after the intro, the program stops and a message saying that the file has not been installed properly arrives. I tried to run by clicking on the desktop icon and selecting XP XP.
I'd appreciate any help!
Hello ssasshastar,
Thank you for visiting the website of Microsoft Windows Vista Community.
Follow these steps to find out what's compatible with Vista before you buy or download:
http://www.Microsoft.com/Windows/compatibility/
You should check the Web site of the games see download and installation instructions.
This should solve your problem.
Let us know if these steps solve your problem. I hope the information is useful.
Kind regards
Anthony
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
Tags: Windows
Similar Questions
-
try installing acrobat. I bought it at Best Buy. The reception contains a serial number enabled to use when configuring the software. I walked into this and it says invalid series. Because Adobe also gives me a redemption inside the packaging code to receive a serial number online, I tried this and it also says inactive redemption code. I called Best Buy and they say that it has been activated on their end and the issue needs to be addressed with ADOBE.
Hi harmansmt,
Please check the KB: http://helpx.adobe.com/x-productkb/global/redemption-code-help.html
In case of problems you can contact Chat assistance at: get help with orders, refunds and exchanges
Kind regards
Rave
-
As noted above, immediately after you export an image in a file - if I want to go back to work on this image it just says that the file is not found. I have not changed the name of the file.
Also, after work on an image in Photoshop and saves a copy to the lightroom folder - I don't find it anywhere. It works if I save on the original image from lightroom, but if I save a copy I can't find it in the file anywhere!
Hi mayab13,
How do you export the image from Lightroom, because export image from Lightroom keeps the image in Lightroom.
Could you please tell me your step by step workflow.
Kind regards
Tanuj
-
Cannot install itunes. It installs but when I clicked on it said has not been installed correctly. I uninstalled, reinstalled several times but does not work.
Trying to download iTunes again, but instead run the installer from its current location, try saving it to your hard drive and then run the configuration file.
Problem installing iTunes or QuickTime for Windows
http://support.Apple.com/kb/ht1926iTunes for Windows Vista or Windows 7: troubleshooting...
http://support.Apple.com/kb/ts1717You can try both uninstalling and reinstalling as a new user to see if that helps:
http://Windows.Microsoft.com/en-us/Windows7/create-a-user-accountIf this isn't the case, I recommend you contact Apple for assistance.
Check your hard drive for errors:
Click Start
Type: CMD, according to the results, right-click CMD
Click on "Run as Administrator"
At the command prompt, type: chkdsk /f /r
When you restart your system, your computer will be scanned for errors and will try to correct them.
-
short cuts on the desktop for the URL will not work. Try to connect the browser when rises the address has not been transposed, it's all just white
There may be some problems that repair tools are not picking up. It may be preferable to a repair facility. This can help with any corruption of the registry, which could happen by the deletion of these programs. http://support.Microsoft.com/kb/917964
Keep in mind when running all that modifies the system it is always a good idea to have your data and backup programs (it's general advice for any system its always good to have a backup in case of possible failure of material/virus)
-
recently I went on vacation... sound computer works very well before I left. Came back, and now the sound does not work. I checked all the settings and it says everything is working. I've done some research and there was only one window to come when I rebooted that says a file with the extension dll is not found. So I restored by computer back to before I left on vacation, but still no sound. No pop up with the dll is not found though. I went in the "maintenance" section and found it seems to be a few questions audio below is the scheme which is the filler. Hope this is enough information for assistance. said the task of event 20 116. I have an ACER one with windows. the computer has HDMI dolby and realtek.
Judy Hello,
Thank you for visiting Microsoft Community and we provide a detailed description of the issue.
According to the description, I understand you have a problem with the sound does not work properly in the computer even if the settings say that the audio does not work properly.
Certainly, I understand your concern and will try my best to help you.
I appreciate all your efforts really to try to solve this problem.
This issue would have intervened if the sound card has went wrong in the computer or audio drivers have been corrupted.
I would suggest trying the following methods and check if that helps.
Method 1:
I suggest you to refer to the procedure described in the article below and check if it helps.
No sound in Windows
Note: The above article will help you identify and solve its current problems in Windows, including no sound from your speakers or headphones.
Also try to install the latest drivers from the chipset in the system and check if it helps.
If the problem persists, follow method 2
Method 2:
How to use the tool File Checker system to fix missing or damaged system files, please follow the steps in the link provided below.
https://support.Microsoft.com/kb/929833?WA=wsignin1.0
Note: System File Checker is a Windows utility that allows users to find corruptions in Windows system files and restore the damaged files. This article explains how to run the tool (SFC.exe) System File Checkerto scan your system files and to repair the missing system or damaged files from Windows or Windows 8 8.1. If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected.
I hope this information is useful.
Please let us know if you need more help, we will be happy to help you.
Thank you.
-
you just bought LR6 DVD that I tried to install Adobe says that the installation is not possible because I am running Vista, even if I run Win7 Home Premium on my computer. Any ideas how to solve this problem?
Right click on the file Setup.exe and choose Properties option.
Then click on the Compatibility tab.
The value of the Windows 7 operating system and check.
See the link below:
-
I bought a few years ago a Creative Suite Design Premium and when I want to record my serial number, your services say that the number is not valid. I am surprised because I have used it before on a PC computer that no longer works. I change my computer with a Mac. You can check the number you customer service gave me, L. Fernandes: < num series kglad deleted >. I give you my phone number in Paris: < phone number deleted - kglad >. Best account. Chantal
http://helpx.Adobe.com/Creative-Suite/KB/error-serial-number-valid-product.html
p.s. This is a public forum. the display of your phone number is a bad idea and display your serial number will get it banned (or used by someone else and will not you).
-
Webcam - Skype says that the webcam is not working
I tried Skype this morning and for some reason any, they told me that the Webcam was not working. Why would that happen? I have not had problems with this before that my computer is less than 4 months. Any suggestions?
Hello
You can use the camera without Skype? Have you rebooted to see if something was blocking
access the camera?Troubleshoot camera connection
http://Windows.Microsoft.com/en-us/Windows7/Troubleshoot-camera-connection-problemsYou probably need to recharge the device drivers and camera control software (usually included
with the drivers and installed at the same time).Login as an administrator.
Double-click Control Panel / Device Manager - Imaging - writing down of the brand and model of camera.
on this subject and on the tab of the driver is version. Now, click on update drivers (who are unable to do anything as MS
is far behind the pilots of certification). RIGHT click on the camera - UNINSTALL - REBOOT - it
will update the driver stack.Now, go to the system manufacturer's website and download the latest driver for the camera and the other related camera
software (if not more recent get the same).Download - SAVE - go to them and RIGHT CLICK - RUN AS ADMIN - reboot after each driver.
Manually look at the sites of the manufacturer for drivers.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmInstallation and update of drivers to 7 (update drivers manually using the methods above is preferred
to make sure that the latest drivers from the manufacturer of system and device manufacturers are located)
http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.htmlThen let windows updates on however prevent loading of drivers who are often older than the
those that you have installed. If updates suggests a pilot and then HIDE it and watch manually to see if their
really is a more recent version (at the time system manufacturer and the sites of the manufacturer of the device).Stop Windows 7 to automatically install device drivers
http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/How to disable automatic driver Installation in Windows 7 / Vista
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for professionals,
Ultimate and Enterprise)
http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/----------------------------------------------------------------------------
If the device works without Skype can communicate with their support.
Skype - Support
https://support.Skype.com/en-us/Skype - Forums
http://Forum.Skype.com/I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
I have a new Win 7 laptop and want to transfer the files from my old Vista laptop. Recently I used Easy Transfer and a USB cable to do this on a machine for the wife swap so I know it works. However, when you try to load transfer them easily on my Vista machine, I get an error message that says that this update is not available. Anyone know what is the cause and what is the solution?
original title: Windows Easy Transfer problemHi Michael,
1. you try to download Windows Easy transfer?
If you transfer files from Windows vista to Windows 7, you don't have to download Windows easy transfer.
In Windows vista and Windows 7 windows easy transfer is incorporated.
You can check the following items and check if it helps.
Transfer files and settings from another computer
Transferring files and settings: frequently asked questions
Hope this information is useful.
-
Need help...
My hard drive crashed,
then re-install Vista Basic Edition,
Complete the activation code (come when I bought my notebook)
but activation said that my license has already been used
and I have to purchase another license?
How to solve this problem?
Hello
You receive an error message?
I suggest you follow the step to contact the Microsoft support center and check.
(a) click Start and in the search for box type: slui.exe 4
(b) press ENTER on your keyboard
(c) select your country.
(d) take the phone activation option and brace yourself for a real person.
How to activate Windows Vista
http://support.Microsoft.com/kb/940315
-
My HP officejet 4500 works very well on my Toshiba laptop (my computer only and not shared) but windows has an error message saying that the printer driver. How to stop this message?
Visit the HP website and download the driver you need.
Good luck.
-
I tried to install Health Vault Connection. My computer, an HP laptop, tells me that the program has stopped working. It works on Windows XP and Windows 7 PC. I recently discovered that it will not work in DOS. How to get this running and how to uninstall BACK so that this program will be executed. Will affect the functioning of the laptop?
Original title: program compatibility Application Applications App Apps game games Legacy Crash crashes Hang hangs
There are no BACKS to win and has not been for some time, so I don't know where you got this information.
Clean boot the PC, then reinstall HealthVault
http://www.Microsoft.com/en-us/HealthVault/tools-devices/devices.aspx
(Remove compatibility options that you maybe solved everything first)
-
I have never had a problem with my computer before updating. I looked at various sites in regard to this problem and have noticed that a lot of people's problems with this update. Windows Installer Clean Up tool has failed. I also tried to install this through my anti-virus and that didn't work either. It is a complete mystery. Any help would be appreciated.
Thank you
roadbowler74,
Thanks for posting on the Microsoft Answers community forums. We want to help you solve your problem with the installation of service pack 2. There are several things that could cause this problem. Here's an article in the knowledge base that has some tips troubleshooting step by step for this specific problem:http://support.Microsoft.com/kb/947366
How to troubleshoot the installation of the service pack, Windows Vista and Windows Server 2008 issues.The article is too long for me to post this here, so I do not say that you read and follow the steps as it should help you solve your problem. Please let us know if you need more assistance.
Thank youGloria
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
original title: problem downloading
whenever I have download anything download is well over upto100% but the file or the software won't open or saved. It gives the message that this file contains viruses and has been deleted. Please help me find a solution thanks
I use compaq notebook pesario CQ 60 with pentium dual core inside windows vista AVG anti virus security system
Hi sirmalik,
· Did you the latest changes on the computer before this problem?
· The problem occurs with all the files?
· From which site you try to download the file?
· What web browser do you use?
I suggest you follow these methods.
Method 1: Start the computer in safe mode with network and check if the problem persists.
http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode
If the problem does not persist in SafeMode with network, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.
Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startupmode.
Method 2: Try to create a new user account.
Create a new user account
http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account
If the problem is resolved in a new user account, you can check the link on the way below difficulty a user profile is corrupted.
http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile
Maybe you are looking for
-
: No option for custome scalling
Before there was an option under 'ladder' which allowed me to scale manual to make it perfect for my TV.Now that option has gone I have no way to get it to fit my TV. None of the resolutions offered work. How can I return this option?
-
OfficeJet Pro 8600: HP Officejet Pro 8600 goes to sleep
How can I stop the HP Officejet Pro 8600 fall asleep when I remove my lap top of docking station?
-
How to save a Table of data on Excel file
Hi anyone knows how to save data to the table of labview, I want to save this data to the excel file.
-
Original title: error explorer.exe, Normaliz.dll is missing please help me about the issue. Hello I get the error "this application has failed to start because normaliz.dll was not found. Reinstalling the application may fix this problem"Please help
-
Mcagent.exe - Entry Point error
Computer froze - restarted. After a partial restoration still have no bar of tasks or ability to connect to the internet. Rec'd msg of error: "Mcagent.exe - not found entry Point entry procedure point GetProcess Id is not found in the KERNEL32.dll dy