Agent Extension SNMP event log has not initialized properly in windows 2008 R2

I enabled the functionality of SNMP Service and found the following error:

"Error 2019: Extension SNMP event log Agent has not initialized properly in windows 2008 R2 Enterprise 64-bit.

I uninstalled all related SNMP Applications and reinstalled the functionality of the SNMP Service, however, I always do face the same error.

According to the following of Article http://support.microsoft.com/kb/128729 , this requires to contact microsoft to obtain the fix.

I have a subscription with Microsoft technical support to download the fix mentioned the article above.

Any help please,.

Advertisement

Hello

The question you posted would be better suited in the community pro Windows 2008.
http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

Tags: Windows

Similar Questions

  • Shared folder of the server become unreachable. Event logs is not useful. No relevant newspaper found.

    Hello world

    Here's the scenario:

    Shared folder of the server became unreachable. Try to access via UNC (name or IP), but failed. Server is pings and accessible via RDP. Server service is started. I can telnet port 445. The Windows Firewall is disabled.

    OS: Windows Server 2008 R2 SP1 Standard

    Restarting the server problem.

    Need your help on this issue. The question met twice last August 08 and 28. Event logs is not useful. No relevant newspaper found.

    Thanks in advance.

    Ask in the forum Windows Server:
    http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  • Attempt to restore the system on Aspire E1-510-4659. Restoration has not initialized, but went to a BSoD loop.

    Tried a system restore but restore has not initialized and went into a loop. After a long delay itwent on a BSoD and looping continues by saying that he could restart the computer. There can be no. Can't stop to do a reboot.

    Hello

    You can use ALT + F10, to access Boot Options advances & you can try to refresh or Reset. Cheerse

  • System Restore does not: Windows XP, getting the error "system restore has not initialized because windows stops."

    "System restore has not initialized because windows stops."

    This message keeps me from using system restore any previous date, I chose. Restore fails every time.

    Window shutsdown too early. What can I do to prevent this?

    Try to boot mode safe (the F8 key as the computer starts from the tap) and run system restore from in Safe Mode.

    HTH,
    JW

  • I reinstalled the air combat Simulator 3 but he can't play. He gets at the beginning and then freezes. I've got shield deluxe antivirus 2009. He has not done this with the 2008 deluxe version of shield. Yet, I can play any other game.

    I reinstalled the air combat Simulator 3 but he can't play. He gets at the beginning and then freezes. I've got shield deluxe antivirus 2009. He has not done this with the 2008 deluxe version of shield. Yet, I can play any other game.

    Hi gullo56,

    Welcome to Microsoft Answers Community Forums.

    To help you better I would ask,

    a. If it functioned very well under Windows 7 before?

    ·         I suggest you to disable your firewall security software and check if you are able to play the game.

    From the link below, what I discovered is Microsoft Flight Simulator 3 is not completely compatible with Windows 7, but I would suggest that you follow the steps below to help troubleshoot your problem.

    http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?type=software&s=combat%20flight%20simulator%203

    1. as Microsoft Combat Flight Simulator 3 is supported by Microsoft Windows Vista to function normally, I suggest you run this program in Vista compatibility mode in Microsoft Windows 7.

    For information about how to run a program in an earlier version of Windows, visit the link below,

    http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

    2. you can also try to reduce the hardware acceleration and check if it solves your problem,

    1. Click Start-> Control Panel-> appearance and personalization.

    2. under customization, click on adjust the screen resolution.

    3. in the display settings dialog box, click the Advanced Settings button.

    4. in the monitor Properties dialog box, click the Troubleshooting tab.

    5. click on the change settings button.

    6. in the Security dialog box, click on continue.

    7 move the hardware acceleration slider to none to reduce or turn off video hardware acceleration.

    8. click on OK.

    9. restart Windows.

    Hope this information helped you.

    Kind regards

    Arona - Microsoft technical support engineer

    --------------------------------------------------------------------------------------

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • "The selected printer is not available or has not been properly. Check your printer or try to select another printer.

    Hello.

    I recently got a new computer. I have installed the printer software and it successfully print a test page. He will appear in devices and printers. Device Manager says it's working properly. However, it will not print anything else. No PDF no Word document, no web pages. Right now I get the error message that I put in the subject of the message, on a gray page. I turned it works again, I removed and put the cables. I don't know what else to do. Anyone know what is happening here?

    The convenience store has found nothing wrong.

    I reinstalled the printer software.

    Once again, the error message is; "The selected printer is not available or has not been properly. Check your printer or try to select another printer.

    Thanks in advance.

    For troubleshooting, please follow the links with the steps below.

    Click on the link below to fix common printer problems:

    Solve printer problems

    Follow the steps below on how to print attachments in Outlook 2010:

    Print attachments received in e-mail messages. Outlook 2010

    Follow the steps indicated by the ZigZag3143 (MS - MVP) on this link:

    Print from Outlook.com

    Follow the steps below on how to erase and reset the printer spooler:

    Clear Printer Spooler queues and activate the Spooler Service Print spooler is the main component of the printing interface. The print spooler is an executable file that manages the printing process. Print management is to retrieve the location of the correct printer driver, load the driver, queue function calls high level in a test of the work, schedule the print job for printing and so on. The spooler is loaded at system startup and continues to run until the operating system is shut down.

    Keep us updated.

  • get this pop up message "a necessary component of the Windows Media Center has not started properly. Restart Windows Media Center.

    Original title: Windows Media Center

    Whenever I try to add videos (or whatever it is) on my media center it will not add and I get this pop up message "a necessary component of the Windows Media Center has not started properly. Restart Windows Media Center.

    And I restart it, but it still gives me the same thing whenever I'll add things. I also have the Extender for my xbox 360 and video flies never show there either. A few moments ago, I got this working with my xbox and everyhting showed, now it gives me fits. Can someone please help

    Try this for me:

    Task Scheduler (Local)-> library of Task Scheduler-> Microsoft-> Windows-> Media Center-> MediaCenterRecoveryTask

    If this does not work, try this:

    1. open regedit by clicking on the start menu and type "regedit" in the search box and clicking on the link of the regedit program that opens.

    2. go in HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion

    3. click on the file --> export and save a copy of this portion of the registry where you can find later if you need IT.

    4 Note the values in the column of data to "ProgramFilesDir" and "ProgramFilesDir (x 86(). (If you have only one of those that, don't worry. I think that only users of Windows 64-bit will have both, but I don't know.)

    5. If you have a standard installation of Windows, the right for "ProgramFilesDir" column should read "C:\Program Files" and the right column for "ProgramFilesDir (x 86) ' should read"C:\Program Files (x 86)"." If they are not, try changing them to these values. To do this right click on the name in the left column and selecting Edit. Copy the 'correct' value of this message in the data value field in the box that opens. Click OK , and then do the same for the other (if you have two).

    6. RESTART. It will not work until you restart your computer.

    7. Open Windows Media Center and see if the problem is resolved.

  • I get an error code, ""this device does not work properly because Windows cannot load the drivers required for this device. " (Code 31) "on the computer.

    My drive hard seagate is not recognized on my laptop, I can see it in the legacy of the laptop but has an exclamation deside it, there a message when I tried to solve the problems, error was not fixed, the device status is "this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) »

    Is anyone know how can I access my hard drive again?

    Thank you

    Hello

    You has made changes to the system before the error appearing?  Cancel the changes.

    (1) in Device Manager > right click on the driver, and then select uninstall

    Reboot and Windows will reload the driver

    (2) remove the upper & lower filters that cause errors in Code 31

    http://pcsupport.about.com/od/driverssupport/HT/UpperFilters-LowerFilters.htm

    Access the manufacturer's Web site and search for updated driver

  • Error of USB host - peripheral controller is not working properly because Windows cannot load the drivers required for this device. (Code 31)

    Original title - USB - IF xHCI USB Host Controller

    This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

    I have a permanent error on my computer and when I run the troubleshooter I get the above message.  It says Windows cannot load the driver.

    Hello

    USB devices remove all you can - restart the computer - is still there, the error? If it isn't
    It is related to one of the add-in devices that you removed. If she is still there, then, the question is
    either a device internal who can not remove or physically with the USB bus itself.
    If it was not there, add devices at a time until it is displayed - keep in mind that it is
    possible that there are two (or more) devices in conflict over the issue. Once you
    identified the check of the aircraft with the help of the manufacturer.

    1. to find the control panel - device - device - right-click on it - uninstall - Manager then
    Restart the computer to see if it clears.

    2. same place - double click on the device - driver tab - driver update - to see if that helps.

    3. check with the support of system manufacturer (manufacturer of motherboard for customized systems), their
    online documentation and drivers, diagnostics and ask questions in their forums on all known
    questions. Update the Bios and chipset or other USB drivers.

    =====================================

    If necessary, we will use these additional troubleshooting methods:

    How to fix Code 31 errors
    http://pcsupport.about.com/od/findbyerrormessage/a/code-31-error.htm

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • My crashing after windows loading and I have this message - this device is not working properly because Windows cannot load the drivers required for this device. (Code 31)

    This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

    Hello

    Have you tried to update the drivers as suggested by Basith M?

    Method 1:
    You can run the fix provided in the link and check out them.
    Hardware devices do not work or are not detected in Windows
    http://support.Microsoft.com/GP/hardware_device_problems


    Method 2:
    You can also try the procedure described in the link to troubleshoot driver issues.
    Tips for solving common driver problems
    http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-driver-problems

    See also the proposal contained in the link and check.
    On a Windows Vista-based computer or on a Windows Server 2008-based computer, the Microsoft ISATAP map appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message
    http://support.Microsoft.com/kb/932520/en-us
  • This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

    Original title: this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) in graphics AMD - 8151 HyperTransport (MC) AGP3.0 Tunnel

    This device does not work properly because Windows cannot load the drivers required for this device. (Code 31) in the graphics AMD - 8151 HyperTransport (MC) AGP3.0 Tunnel, what do I do to fix this help please.

    Jake

    Hey Jake,

    Follow these methods.

    Method 1: Follow these steps:

    (a) restart your computer if you have not already done so. There is always the possibility that the error Code 31 that you see was caused by a temporary problem with Device Manager. If so, a simple reboot can solve the Code 31.

    (b) have you install a device or a change in the Device Manager, just as the Code 31 error appeared? If so, it is very possible that the modification caused the Code 31 error.

    (c) cancel the change if you can restart the computer and then check again the error Code 31. Depending on the changes, some solutions may include:

    Remove or reconfigure newly installed unit.

    Restore a version prior to updating the driver.

    Use system restore to undo the Device Manager recent related changes.

    http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

    (d) to remove the registry values filters upper and lower. A common cause of errors in Code 31 is the corruption of two registry values in the class of the CD-ROM/DVD-ROM drive registry key.

    Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link. http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

    Method 2: Update the latest graphic drivers.

    Updated a hardware driver that is not working properly

    http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  • Computer does not recognize network. -This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

    Hello!

    I have problems connecting to my network. I stay in a House (not my own) and I can't connect to the network in this House. When I choose the option 'connect to a network', nothing happens. I followed the instructions to display the "Device Manager" and watch the 'map', and he said:

    "This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

    Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available. »

    When I click on this button, nothing happens... Should I simply wait for Microsoft to return to me - or is there something else I need to do?

    Thank you!

    Hello

    You must get the drivers latset for m computer support site.

    Delete the "false: entry in Device Manager and install the new drivers."

    Jack-MVP Windows Networking. WWW.EZLAN.NET

  • Error: This device does not work properly because Windows cannot load the...

    I get this error message "this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) "via a wired connection. And that's the Microsoft 6to4 adapt #7 and the same card but the #4 one.  Are these drivers or another file that I could use DL?

    Hi JasonBedgood,

    1. Once you get the error message?
    2. did you of recent changes on the computer?

    This error occurs if the required driver is not installed or the driver is damaged.

    I suggest that you update the driver for the device and check.

    How can I update the driver for network card on the computer

    1. click on Start, click Control Panel, and then double-click System.
    2. click the tab hardware , and then click Device Manager.
    NOTE: If you are prompted for an administrator password or for confirmation, type the password, or click continue.
    3. click on network adapters to expand.
    4. under network adapters, double-click the entry for Microsoft 6to4and then click driver .
    5. click on Update driver software.
    6. follow the Wizard update software driver to update the driver for NICs .

    Updated a hardware driver that is not working properly
    http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

    If the device driver update did not help then check the link below for one of the thread with the question and try the steps mentioned by Lionel Chen on January 9, 2008
    http://social.technet.Microsoft.com/forums/en-us/itprovistahardware/thread/3a503cdb-e61c-44BC-97c4-0b38b0e5f929/

    I hope this helps!

    Halima S - Microsoft technical support.
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Huawei Mobile Connect 3 G Modem this device does not work properly because Windows cannot load the drivers required for this device. (Code 31).

    System: Windows 7 Ultimate 64-bit. QC processor 2.5 Ghz, 4 GB RAM, Nvidia 9600GT. The work of modem very well until about a month. Uninstalles the device, I reinstalled it but the same messages. I've updated the driver and software, still nothing. In safe mode, the modem driver is loaded and the devicemanager reports that the device is functioning properly. Once the system is booted in normal mode divcemanager reports: this device does not work properly because Windows cannot load the drivers required for this device. (Code 31). Help, please. I check the settings for the 6to4 drivers and there is no problem.

    Thanx

    Hi rui2010,
     
    Place your machine in a clean boot State to see if another application is in conflict with the modem.
    If this fails, I recommend you reach out to the community Hauwei for assistance:

     
    Aziz Nadeem - Microsoft Support

    [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

  • This device does not work properly because Windows... this device. (Code 31)

    Hello buddies, how to solve this problem (code 31)

    USB does not work on my PC, I found that it was the problem of the unit. and he wrote that this device does not work properly because Windows cannot load the drivers required for this device. (Code 31).

    How can I solve this problem?

    In addition, you can check the following registry key? :

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ (36FC9E60-C465-11CF-8056-444553540000)

    Is there a 'name' UpperFilters and LowerFiltersin the registry for this key, in the right window?

    If so, what is 'Data' for these names?

Maybe you are looking for