Agilent IVI drivers for 34410A multimeter

I develop using LabWindows/CVI 2013 SP1.

I downloaded the 32-bit version and 64-bit drivers IVI for Agilent 34410 A multimeter Agilent web page at the following address:
http://www.home.Agilent.com/Agilent/software.JSPX?CKEY=1639470&LC=Eng&cc=us&NID=-11143.0.00&ID=16394...

The files are:
driver_ivi_matlab_Agilent34410_1_0_25_0_x86.msi
driver_ivi_matlab_Agilent34410_1_0_25_0_x64.msi

I develop on Win7 64 bit.  I create 32-bit applications CVI.

What version of the IVI driver should install the x 86 or x 64?

Thank you

Kirk

For a 32-bit application, the _x86 driver is the right thing to use.

is there a reason why you are not using NIs IVI - C driver for this device (found at http://sine.ni.com/apps/utf8/niid_web_display.download_page?p_id_guid=E3B19B3E9419659CE034080020E748... )?

Tags: NI Software

Similar Questions

  • Interfacing pilot Agilent IVI - COM for U8903 Audioanalyzer of Labwindows/CVI

    When I try to use the controller Active X of CVI 2009 Wizard to create a C Wrapper for Agilents U8903x IVI - COM drivers, I get more than 100 errors "the too long method name. Is there one solution other than the edition of each name of the simple method, which is to long?

    Hey Markus.

    I just tried to create a controller for this driver and had no problem.  I have install the driver has been downloaded from here.  My only guess is that somehow FP File Format for new files by default "CVI 5.0.1 and earlier.  You can check this by opening a FP in CVI and then go to the Option"menu FP File Format.  Check 5.5 or 8.5 and later versions are selected.

    NickB

    National Instruments

  • All recommended drivers for Agilent 4155c?

    Hello

    I plan to control Agilent 4155c by labview. However I'm just learning that in a month. So could someone could give me some recommendation for 4155 c driver? My OS is windows xp w / labview 2009 full development.

    I tried the network driver, there are 2 drivers for 4156c (style of project & dll with envelope) and already someone said that the style of project is preferable. While the driver style project of 4156c also good 4155c?

    This is my first time to post messages here, please tell me if you need additional information.

    Thank you a lot of time!

    If you look at the Agilents site for manuals of GPIB programming for these devices, you will find one for the 4155c and the c of 4156.  Then they use essentially the same set of commands.  If the style pilot project should also basically works with 4155 c.

    With two exceptions: the driver would not accept the answer to a query ID (* IDN?) the HP 4155.  But it should be easy to adapt in the style of the project pilot. And 4156 c can support some chains of command, which are not supported by the c of 4155 (manual programming Agilents GPIB should list these commands). If the reader of style project make use of one of these commands, you must avoid the VI, who is using this chain of command.

  • For Fluke 8846A IVI drivers

    I am not able to download the drivers for Fluke 8846 IVI. Help, please.

    You can also try a different browser, some customers have reported problems with some versions of Chrome.

  • Cannot rename my PXI-4071 for something else that "PXI-4071" have the self-assessment work, and I can use the new name in the ivi drivers

    I tried to change the name of the PXI-4071 "DMM" that worked, but when I try to launch the "self-test" or open the app it Panel always fails.   This is also true if I pass the new name of the ivi driver.   Return to the name "PXI-4071" makes everything works again.   Note I managed to change the name of our PXI-2530 b 'SWITCH' and the name of our SMU-6363 to "MIO" and I could pass these names to their IVI drivers and they would work.

    I messed with alias VISA, IVI logical names, but nothing works unless it is called "PXI-4071.


  • The IVI Drivers: RangeCheck of initialization option set to true: failed to get an out-of-range error

    Hello

    I'm new to IVI drivers (started using them last week) and I have a problem with the option of initializing RangeCheck.

    So get used to the IVI drivers, I used the example provided with the AgilentE36xx IVI - COM driver (on my computer, it is located in C:\Program Files\IVI Foundation\IVI\Drivers\AgE36xx\Examples\VS.NET\Cpp\Example1).

    I could do everything I wanted except get an error out-of-range, during the passage of an out-of-range value to a function. I put the RangeCheck init option to true, but I don't have any error in the simulation, nor with the connected equipment.

    Attached is the code (from the example of Agilent) but modified so that it should throw an out-of-range error when adjusting the tension on the following line: spOutput1-> VoltageLevel = 1000; ... why no error.

    Still, it runs correctly. Can someone tell me what I'm not doing correctly.

    Kind regards

    Roman

    Hello

    I posted the question on the Forum of Agilent.

    Here is the link to the post: http://www.home.agilent.com/owc_discussions/thread.jspa?threadID=33348&tstart=0

    The problem is now resolved. Thank you for your help.

    Kind regards

    Roman

  • IVI drivers

    So I read through the VISA and IVI definition/intros, and it sounds like the listed on site IVI drivers of OR would be better to our application needs. It seems that every driver is supported in one or more of the following development environments: LabVIEW, LabVIEW/CVI, Measurement Studio or just of the .NET Framework. I would just like to interact with these drivers via c# in VS2010, but the drivers I need are not available in the .NET Framework.

    My question (s):

    Do I need to buy a subscription of Measurement Studio for VS2010 to use the Measurement Studio drivers? Can't I just use these in VS2010 without Measurement Studio?

    If I don't want to purchase Measurement Studio but want to continue to use these devices, the next best idea would directly communicate with the VISA layer for these devices?

    Thank you!

    Hi Geoff V.

    To answer your first question

    Do I need to buy a subscription of Measurement Studio for VS2010 to use the Measurement Studio drivers? Can't I just use these in VS2010 without Measurement Studio?

    My answer is NO! You could manipulate the managed to the native technology - PInoke code or something like that.

    Here's a simple example:

    [DllImport("IviFgen.dll", EntryPoint = "IviFgen_ConfigureOutputMode", CallingConvention = CallingConvention.StdCall)]
    public static extern int ConfigureOutputMode(System.Runtime.InteropServices.HandleRef Instrument_Handle, int Output_Mode);
    

    After that, just use the function declared in c#.

    Thank you

    Charles

  • IVI drivers in labview 8.0.1

    I am not able to install specific drivers IVI in LabVIEW 8.0.1.

    The drivers I want to use are for fluke 8846a, 8508a and 5720 a..

    The installation of these specific IVI drivers does not have an installation option for the version of labview 8.0, it gives the possibility to install on the versions 7.1, 8.2, 8.5, and 2009.

    Help, please.

    Hello Christopher,

    It is the support for LabVIEW waited for new IVI specific Driver installers (currently released installers only support LV 8.2 and higher).  You can simply copy the LV 7.1 on the files to the LV 8.0.1 directories and then mass-compilation live.

    See you soon,.

    NathanT

  • create IVI driver for HP 34401

    I searched and can't seem to find if there is a driver available for the HP/Aggilent 34401 IVI? Is it possible to create an IVI driver for this resource?

    Hello Dennis,.

    Please, try the following:

    1. make sure that MAX is closed

    2 re-run the IVI for IVI 34401 driver setup and use it to uninstall the driver

    3. make sure that MAX is always closed

    4 run the IVI installer from the IVI 34401 again driver to install the driver

    5 confirm that the installer put the files (.c, .fp and .sub) at the following location: C:\Program Files\IVI Foundation\IVI\Drivers\hp34401a

    5a. also confirm that there is a hp34401a_32.dll in the folder C:\Program Files\IVI Foundation\IVI\Bin

    6. open MAX and see if there is now a session driver for the specific driver of IVI hp34401A

    7. If there is not a session driver driver, you will need to create a

    Please let us know how it goes,

    NathanT

  • How to 'release' class IVI drivers in a MAX to bind a specific to a given class driver driver?

    Hi all
    I'm pilots to develop a family of instruments for which no IVI drivers are available.
    I want to manage these instruments as IVI devices in my test system
    I created a pilot of the new IVI class with the Wizard "Create Custom IVI class driver ' Labwindows/CVI, for my family of instrument
    Then, I created a specific new IVI driver with specific 'Create of IVI Driver' assistant, for one of the instruments of my family.
    In MAX, I created a Module of Instrument Driver software for my specific driver.
    In the published API tab, I can't add my new class driver API.

    Question: How can "publish" class IVI drivers to bind a specific to a given class driver driver?

    I use MAX 4.5 and 8.5 CVI

    Thank you for your help

    Hello Nveron,

    Looks like you will have to manually update the XML of IVI Configuration store to do two things:

    -Add your custom class as one of the published API


                IviCustom
                1
                0
                IVI - C
           

    -Add the API published to the software module


                    
                    
                    
     

    I just chose p678 as the idref to prevent conflict with the other existing idrefs.

    Let us know how it goes,

    NathanT

  • Windows 10 drivers for Mac

    Hello

    I have recently installed windows 8 via bootcamp, then updated to windows 8.1. Then I downloaded an iso 10 and updated Windows updated my 8.1 to 10. But now im having some driver problems. When I was using windows 8 and 8.1, I had no problem driver, but now I can't control my keyboard, the screen brightness or volume keys... Basically, all fn keys are out of wack. I tried to search on google to see if I can find the drivers I need, but all that says always use "Apple Software Update" tool in windows to get the drivers. I did, but he says that my machine is up to date. Can someone help me get the right drivers please and tell me how to install?

    I use a 2015 retina mac book pro 15 inches that uses the latest version of OS X and Windows 10 education.

    Thank you

    Please download BC6 drivers for Apple W10 using BC Assistant to a flashdrive uSB, as shown.

  • 64 bit Windows7/8/8.1/10 USB drivers for Palm Desktop

    Thank you people much more to Aceeca.com (Palm OS Garnet NEW manufacturers), the USB drivers for Vista, Windows 7 and 8 Win 64 bit operating systems are available.  There are many users Palm Desktop 4.x strives also to the declaration.

    I have synced my TX my Vista64 laptop computer bits and Windows 8.1 HP spectrum X 2 hybrid successfully through my USB cable.

    The drivers are located here:

    Aceeca Driver Downloads

    (NOTE: as of today, 01/08/2016 Aceeca site to be down for 'construction'.)  Drivers can also be found here: http://www.palmdr.com/windows-7-64-bit-usb-drivers)

    Installation instructions for Windows 7 (from Aceeca) are included in the download.

    Basic instructions:

    1 download the drivers and extract them in the same folder.  Remember the folder that you extracted to.

    2. try to HotSync your device.  It will fail.

    3. open the Device Manager and look for the yellow Triangle next to the other "Acceca" or "'Palm device ' in the"Other devices"section."

    4. right click on the device and choose "Update driver software".

    5. choose "Browse my computer for software" and guide them to the folder that you extracted the drivers Aceeca.

    6 choose 'Next' in the driver and then file location window tell him 'Confidence always Aceeca Ltd. software', then click on the button "install".

    7. I received an error message (Vista64) who told me "the drivers have been installed, but the device could not be opened." I realized my TX had expired, and fell asleep.  I tried a HotSync and it worked!

    Good luck!

    NOTE: Palm Desktop 6.22 may only multimedia show and install.  Here's how to fix this:

    If Palm Desktop 6.2.2 shows only the media and installation, try this: right click on the shortcut for Palm Desktop, and then choose 'run as administrator '.  Other modules should appear.

    To Palm Desktop run as administrator every time in Windows 8 / 8.1:

    Close to Palm Desktop, if it is open.  (This is a very important thing to do when you use 6.2.2 - it has been known to lose data when a computer is shut down without closing the program!)

    Right click on the desktop icon of Palm in the metro screen, then choose "open file location".  You will now see the actual file for the shortcut.

    Right-click on the file "Palm Desktop" shortcut, then properties.  Now, choose the tab compatibility at the top.

    At the bottom of the Compatibility tab is a checkbox: "run this program as an administrator", click OK.

    Try to open the Palm Desktop, all parties must appear.  You can see a box opens when you close the program asking "did the program runs correctly.   I chose 'Yes', and it has been working fine since then!

    If you are using a much older PalmOS device and try using Palm Desktop 4.x, you will need this additional patch Pimlico Software:

    Palm HotSync configuration

    WyreNut

    Forum member bobboffin has added this message:

    "After you try your first HotSync and failing (as expected) you may be unable to find any trace of the device in Device Manager, making the next step very difficult. It is me, and after some research, I discovered the following trick that allows Device Manager to display hidden and devices not present.

    Open Notepad and paste the following two lines are:

    Set DEVMGR_SHOW_NONPRESENT_DEVICES = 1
    Start devmgmt.msc

    Save it as SetDev.bat in My Documents.

    Open My Documents in Windows Explorer and double-click SetDev.bat. Device Manager opens.

    On the view menu, select Show hidden devices.

    You can now see in the other position of the device with a yellow triangle against it.

    You can now proceed to install the drivers according to the instructions.

    Note that the driver supports most versions of Palm OS. "I actually use an Aceeca Meazura 1000 rugged PDA running OS 4.1 - bobboffin.

    I hope this helps!

    WyreNut

    pattirclark wrote:


    SUCCESS... After writing my last response indicating no connectivity, I tried a last time and success for the Palm Palm devices and synchronization with 64-bit Windows 8 71 22.  Thanks again to WyreNut for all the support that I know that this Forum is an advantage for those who have limited computer knowledge and detailed suggestions has worked perfectly...

    Thank you again...

    And thank you! pattirclark!  You are the first person to report success with drivers Aceeca and Windows 8!

  • XP drivers for HP Pavilion Elite m9280.me desktop PC

    Hi, I'm looking drivers XP (downgrade) to HP Pavilion Elite m9280.me desktop PC.

    I can't find them on HP Web site, there is only the lightscribe software.

    Can someone write me a list of the devices (e.g. video: GeForce GT 130) or the site where I can the found? Thank you very much!!! Tangier

    Drivers for Windows XP:

    Intel G33 chipset (first installation and reboot) here

    Intel Matrix Storage Manager here

    Realtek HD Audio here (install it before graphics driver)

    Graphic Nvidia GT 130

    Use modded worm 185.85 Nvidia drivers.

    How to install under XP:

    Basically, it is a 3 step process:
    1. Download driver here, double click and select Extract.
    2. download modded INF here and replace the original INF in extracted folder.
    3 install and reboot.

    LAN Realtek RTL8111C here

    Lite - on Wireless LAN here

    .NET framework 1.1 (Install before HP multimedia keyboard)

    HP multimedia keyboard here

  • 15AC184tu: windows drivers for hp15ac184tu 8

    my laptop model is 15ac184tu. I am currently using win 8. but I don't have the drivers for win 8. so can you help me solve this problem... As soon as possible.

    Hello:

    HP does not support this model for Windows 8, and there is no Windows 8 drivers for the wireless network adapter that your laptop from anywhere I have ever been.

    I recommend connect you via ethernet cable, do the updates required to get the free upgrade to W8.1 in the windows store, then you can use the W8.1 drivers and software of the 15 t-ac000, except the BIOS and firmware files.

    http://support.HP.com/us-en/drivers/selfservice/HP-15-ac000-notebook-PC-series/7771404/model/8381866

  • HP 15-af158nm: Windows 7 drivers for HP 15-af158nm

    Hello!

    Just bought the HP 15-af158nm netobook and installed windows 7 (64-bit), but I couldn't access the internet, LAN or wirelles is USB not work porperly... Searched Hp's site and the internet for drivers but no use...

    Is could someone please tell me where can get the drivers for the following items:

    Ethernet controller

    PCI\VEN_10EC & DEV_8136 & SUBSYS_80CC103C & REV_07
    PCI\VEN_10EC & DEV_8136 & SUBSYS_80CC103C
    PCI\VEN_10EC & DEV_8136 & CC_020000
    PCI\VEN_10EC & DEV_8136 & CC_0200

    Network controller

    PCI\VEN_14E4 & DEV_4365 & SUBSYS_804A103C & REV_01
    PCI\VEN_14E4 & DEV_4365 & SUBSYS_804A103C
    PCI\VEN_14E4 & DEV_4365 & CC_028000
    PCI\VEN_14E4 & DEV_4365 & CC_0280

    PCI encryption/decryption controller

    PCI\VEN_1022 & DEV_1537 & SUBSYS_15371022 & REV_00
    PCI\VEN_1022 & DEV_1537 & SUBSYS_15371022
    PCI\VEN_1022 & DEV_1537 & CC_108000
    PCI\VEN_1022 & DEV_1537 & CC_1080

    SM Bus controller

    PCI\VEN_1022 & DEV_780B & SUBSYS_80CC103C & REV_42
    PCI\VEN_1022 & DEV_780B & SUBSYS_80CC103C
    PCI\VEN_1022 & DEV_780B & CC_0C0500
    PCI\VEN_1022 & DEV_780B & CC_0C05

    USB controller

    PCI\VEN_1022 & DEV_7814 & SUBSYS_80CC103C & REV_11
    PCI\VEN_1022 & DEV_7814 & SUBSYS_80CC103C
    PCI\VEN_1022 & DEV_7814 & CC_0C0330
    PCI\VEN_1022 & DEV_7814 & CC_0C03

    Unknown device

    ACPI\SMB0001
    * SMB0001

    Video controller
    PCI\VEN_1002 & DEV_6660 & SUBSYS_80CC103C & REV_83
    PCI\VEN_1002 & DEV_6660 & SUBSYS_80CC103C
    PCI\VEN_1002 & DEV_6660 & CC_038000
    PCI\VEN_1002 & DEV_6660 & CC_0380

    Thanks in advance.

    Concerning

    Hello:

    You need these drivers...

    Ethernet:

    This package contains the Realtek driver local area network (LAN) that allows the NIC (NIC) Realtek chip in the notebook models that are running an operating system supported.

    File name: sp71268.exe

    Network controller:

    The package contains the Broadcom wireless LAN drivers and utility which are required to enable the LAN adapter wireless Broadcom integrated into laptops supported that run an operating system supported.

    File name: sp70888.exe

    PCI encryption/decryption controller: note... this driver must be manually installed.

    This package provides the PSP AMD driver for the supported models that are running a supported operating system.

    FTP://ftp.HP.com/pub/SoftPaq/sp68501-69000/sp68619.exe

    To install the driver manually, download and run the above driver.  Conclusion of any windows error.

    Go to Device Manager and click on the controller W/C PCI who need the driver.

    Click the driver tab.  Click on set to update driver.  Select her browse my computer for driver software option and navigate to the folder of the driver that was created when you ran the file.

    This file will be located in C:\SWSetup\sp68619.

    Make sure that the include subfolders is selected and the driver should install.  Then restart the PC.

    SMBus controllers USB... and download and install the driver first on the list from the link below and restart the PC.

    http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2064

    Unknown device:

    This package provides the driver that allows the Synaptics TouchPad in the notebook models that are running a supported operating system. The pilot turns the touchpad General (for example, double-click and scroll) feature and provides a user interface.

    File name: sp72664.exe

    Video controller:

    This package provides the AMD graphics driver high definition (HD) and Catalyst Control Center for models of laptop computers that are running an operating system supported. For laptops equipped with switchable graphics modes, this package contains the drivers for the two graphics (GPU). Switchable graphics allow users to switch between a graphical power mode (normally used under the power of the battery) and a mode of graphics performance. If the video output high-definition multimedia interface (HDMI) is supported, this package also installs the HDMI Audio Driver.

    File name: sp71637.exe

Maybe you are looking for

  • Why can't update or add a new post to a community?

    Why can't update or add a new post to a community?

  • Logging with DSC on a network drive

    Hi, it seems that I can't save the data on a network drive. My ultimate goal is to connect to a NAS, but I now use a mapped shared folder as drive (say S:\). I tried with a shared folder on the development PC itself or on another PC. I have permissio

  • Uninstall IE 64 to IE 32

    I've been on a gaming site, and he said to get IE 64 to play games. I did and now it says to get flash which I can't for IE 64. If I want to return to my IE 32. How can I do this?

  • Fuze corrupt and not recognised in Explorer

    My Sansa Fuze 8 GB said "FAT is corrupted. Please connect the device to PC and recover FAT. "It's not displayed in Windows Explorer either. "I tried to reset to hold the switch for 15 seconds in the on position and taking too. Any help to get this de

  • How to use the print face feature two automatic? I get only one side printed.

    I just got a new HP Officejet Pro 8600 and it says it's supposed to automatically print double-sided.  When I have a paper face two feed the paper from the upper bin feeder, it takes in and it then prints on one side, then he pulls the book which he