AIO 600-1055: Win10 did not work & MS could not make it work. Reinstalled Win7 & now the DVD is not recognized

Have HP AIO 600-1055 Desktop. "Upgraded" to Win10. Didn't work & MS could not make it work. Reinstalled Win7 and now DVD is not recognized

Hello:

See run the resolutions listed in the link below the job for you.

https://support.Microsoft.com/en-us/KB/314060

#3 or #5 usually work.

Tags: HP Printers

Similar Questions

  • Dropped cell phone woman and now the DVD player does not work

    On a trip HP Pavilion dv5000 of my wife was in the computer bag and was dropped off a rack (my fault). Now the DVD drive no longer completely in the case and has no work at all, will not open except by putting a paper clip in the exit hole. Someone instructions how to take this laptop model out just enough to reset the rear DVD player were it belongs and to check the connectors? Would appreciate any help.

    You should find what you need in the Service & Maintenance Guide ICI

  • Why did datasocket works on some of the computers in a windows 2000 network, but not others?

    I use an executable program of labview which write Boolean arrays on multiple computers in a network and their bed on a computer 'server '.  All the client computers are running windows 2000 with the labview run time engine 8.6.  The server computer is running windows 2000 with the labview 8.6 developers edition.  I can only contact between a client computer and the server computer.  Communication will work either way between these two computers.  Either the computer can sucessfully read or write data datasocket.  Other computers cannot communicate in both directions.  All the computers are on the same network in the same workgroup and can see through the network.  It doesn't seem to be a firewall on all computers.  Suggestions?

    It seems he needs the installation standard/full engine runtime 8.6 with decision-making data.  I had the engine smaller run time file installed on the computers that did not work.

  • Reinstalled vista now the modem does not work, says the modem is already in use. Modem does not appear in the material...

    Vista Basic with dial-up. I reinstalled vista and now the modem will not work with any of the numbers given by my provider. He throws error numbers (Sorry didn't write them) and said that the modem is already current usage or other computer is busy. The modem does not appear in the lists of material and reinstallation does not work. The computer does not recognize when a new modem is installed either. I use the same drivers provided with the computer when I got it.

    Hello

    I suggest to refer to this link and follow the instructions in the link below and check, if this can help:

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-modem-problems

    It will be useful.

  • Need to reinstall Vista, but the DvD player does not work

    Alright. That is the problem. I installed windows 7 on my laptop because a virus crashed my windows vista and the lost disk. After installing windows 7 my dvd player wouldn't even appear or open. As there is no power going to it. Before installing 7 worked well. I want to downgrade back to windows vista. I had an iso, mounted police and when installed would not let me because the car is not active or something. Went to disk management in the config of the admin and active player. That I reset. When starting it stops saying BOOTMGR is missing press ctrl alt del to restart. I don't know what else to do. Help, please.

    Here's how to clean install Vista:

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

    http://support.Microsoft.com/default.aspx/KB/918884

    MS advice on the conduct of clean install.

    http://www.theeldergeekvista.com/vista_clean_installation.htm

    A tutorial on the use of a clean install

    http://www.winsupersite.com/showcase/winvista_install_03.asp

    Super Guide Windows Vista Installation

    After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

    Save all data, because it will be lost during a clean installation.

    Cheers.

    Mick Murphy - Microsoft partner

  • Hello! I restored my iPhone 5 because IOS 9.2 does not work well, and now the IPhone does not recognize the SIM CARD ☹️ please someone help me! What can I do?

    Hello!! Recently, I have restored my iPhone 5 because IOS 9.2 does not work well. But now my iPhone does not recognize the SIM CARD.

    I Don' t know what to do, help me please

    You get an error message?

    What did he say?

  • Firefox not working in Win7 now it crashes at startup even after a clean install. is there a problem with Symantec?

    Firefox worked on my Windows 7 desktop. One day he gave me a report of crash at startup, I went through the troubleshooting procedures suggested. I tried restarting, upgrade, uninstalled and reinstalled, uninstalled and cleaned the files and the registry and deleted the files module then resettled but nothing works. It keeps giving a crash report on startup. I remember that my Symantec software gave a message that FireFox has been stopped due to an attack on my system. Ever since then, it won't work and I can't seem to cross the screen to crash at startup of FireFox.

    Thank you for the report crash IDs. If you open the error reports and click on the 'Modules' tab, you will see that the first on the list in each case is "FLVSrvLib.dll". This module installs with various programs of Applian Technologies including Freecorder and Replay Media Catcher.

    This crash is closely related to have BOTH software Applian software of security AND Norton. As no doubt you don't want spend away from Norton, you can remove or disable the Applian software as follows:

    (1) uninstall and restart

    If you have either of these programs and it is not essential, try to uninstall it then restart Windows to ensure that none of its components are running.

    Firefox will start normally after that?

    (2) avoid auto-start

    If you do not uninstall the program, a few others said using the msconfig program to stop execution at startup FlvSrvc.exe circumvented the problem.

    See: http://windows.microsoft.com/en-us/windows/using-system-configuration

    You may still need to restart to unload the software of your current Windows session.

    Success?

  • Upgraded to Win7 now the touchscreen does not work!

    I recently had to send my TX2604ca in a replacement for the fans. Shortly after he come back that I switched to Win7 x 64. Since the upgrade, I can't touch the screen more. The pen still works, so I know that the material is fine, but no finger touch or gestures are recognized. I guess it's a driver issue, but I have not found anything that points to (work) touch drivers updated to Win7.

    Can anyone confirm that this is my problem? Or, preferably, suggest something that can solve the problem? I use the functions of key constantly. The pen, not so much.

    Read and follow this: http://forum.tabletpcreview.com/showthread.php?t=28392

    who will fix 98% of the problem.

    My problem is that now I have it functional but can not calibrate to the touch. Calibration 'touch' in the control panel simply does not work, it starts but does not recognize my hand. I tried all versions of the touch driver that I can do the job, and none of them is calibrated. I really need to calibrate; It is glaring off for me and ruin the possibilities of contact.

    It is very definitely a big problem.

  • WD external HARD drive no longer works with Win7 since the upgrade to Win10

    My laptop has Windows 7 installed and my external worked fine. My new laptop had win 8.1 pre-installed so I have connected my drive and worked fine but when I plugged in my Win 7 machine he was working more.

    I upgraded my new machine to win 10 to see if that would solve the problem, the drive connected but then I could not remove so I stopped the machine and deleted but I can't always connect to a Win 7 machine.  Everyone knows this?

    Hey there Leeaf72,

    I'm sorry to hear about the issue. What is the model and the capacity of the drive? Have you tried the drive on other systems or possibly with other USB cables?
    I would check if the drive is recognized in the BIOS, Device Manager or disk management. Here's how for the last two:
    Device Manager: http://products.wdc.com/support/kb.ashx?id=cXczh0
    Disk management: http://products.wdc.com/support/kb.ashx?id=xFP3QI

    I would also see if you have all the latest OS and driver updates. Try to reinstall the USB drivers. You can also try out them completely and let the update tool to install.

    If the drive is recognized I download and run WD Data Lifeguard Diagnostic and see if the car passes the quick and extensive tests. Here's a link: http://products.wdc.com/support/kb.ashx?id=a6nz3g

    Post back with some progress,

    Captain_WD.

  • After an accident on my PC Win10, how can I copy my contacts from my old PC Win7 on the machine Win10 Thunderbird?

    Both machines have the latest version of Thunderbird. I can't find any route in the menus that will do the job I need. I tried probably all FAQ relevant again to nothing does not.

    I don't think that there is a formal instruction to achieve this.

    First of all, is to copy your entire profile more useless in this case? Which would transfer your address books and much more.

    https://support.Mozilla.org/en-us/KB/Profiles-TB

    If you want to really just move address books, you can copy files from *.mab of one Thunderbird profile to another. Address book PAB lives in abook.mab and collected addresses lives in history.mab. These two may be copy-and-paste from one profile to another butmake Thunderbird is closed first. Other files *.mab represent user-defined address books and must be imported after them have been copied to the new system. Use https://nic-nac-project.org/~kaosmos/morecols-en.html for that.

    Inside Thunderbird itself, you can export the address book files and their re-importation to the new machine. The LDIF file format works best for this. You can also use CSV, but you will find that you need to select and arrange data fields.

  • My Apple Watch works fine, but now the time is 12 hours off - he thinks it's night now - how can I fix?

    My new Apple Watch works very well for several weeks, but today the time is 12 hours off - he thinks it's night now - how can I fix?

    HI -.

    Try the following steps:

    On your iPhone, go to: settings > General > Date time & - check that the value is automatically activated.

    Check that Bluetooth and Wi - Fi are activated on your iPhone:

    -Phone: Settings > Bluetooth - on.

    -Phone: Settings > Wi - Fi - on.

    Check that your iPhone and Apple Watch are connected:

    -When you show the time on your watch, drag upward on your watch dial > drag left / right for the look of settings > check it shows connected and shows a green phone icon. Disable airplane Mode if it is enabled.

    It can help to restart your iPhone and your watch. Turn on both devices off the power together first, and then restart your iPhone before restarting your watch:

    -To switch off your watch: press and hold the button side until you see the cursor off the power; slide it to turn off;

    -To switch on: press and hold the side button until you see the Apple logo.

  • When we publish a Web site create in MUSE, the server must be linux? Please let me know because I have the problem with the form works... now the server that I use is the window...

    I am trying to publish in my domain on windows server, but I have a problem with the form...

    The server must be linux to work the form?

    Thanks in advance for your help...

    Thank you Brad... but how can I understand if a Linux server support? I try to do something in particular?

  • DVD player not recognized after the upgrade to windows 8

    I write this to document some odd behavior, that I lived after the upgrade to Windows 8 in the hope that it might save some grief for others.  Of course, if someone could explain why this problem occurs, I'd be very interested/grateful for an answer.

    I recently updated my computer from Vista Ultimate to Windows 8.  I did a clean install of Windows 8, because there is nothing special about the machine I wanted to preserve.  In all cases, the upgrade went without a hitch and I was soon back up with Windows 8 as my OS (I really like, btw).

    The only oddity I noticed after the upgrade is that my DVD drive was not recognized by the operating system.  Remember, this is the same DVD player that was used to install the OS, so I found it rather peculiar.  After a bit of lost time, try software solutions theoretical I started to play with the equipment.

    My motherboard is an ASUS M3A78-EM.  My hard drive is attached to the SATA1 port and my DVD player is plugged into the SATA2 port.  I removed the DVD drive from SATA2, plugged into SATA3, restart Windows 8 (from HDD on SATA1) and Windows 8 now recognizes the drive!

    I thought it was really weird, so I stop, put the DVD on SATA2 drive, rebooted, and the drive was no longer available in Windows 8.

    OK, so I thought that maybe the SATA2 channel was bad (even if he had worked at the Windows 8 DVD installation, just an hour or two before), so I put my HDD on SATA2 and the DVD drive on SATA1.  After doing this, Windows 8 start very well (so there is nothing wrong with SATA2), and it recognizes the DVD on the SATA1 drive.

    OK, so I did that for a while, and virtually all combinations I tried worked as long as the DVD player is not plugged in SATA2.

    I cannot live with that, but thought it was really strange.  Also, I note that the old operating system (Vista) was acknowledging the same DVD player while it was plugged on SATA2.  This leads me to believe that the problem has something to do with Windows 8, but I can't imagine what could be the cause.

    Thanks dude.  After you create this registry key/value and restart Windows 8 was able to finally see my DVD drive on SATA2.  =)

  • DVD/CD burner is not recognized by XP on my Satellite Pro U300

    I just bought a Toshiba U300 Satellite Pro with Vista installed :-(.

    For my work, I need to use software that is not compatible with Vista... so I installed my XP - pro software.
    I ran Windows Update a few times, until there is nothing to update.
    I installed all the drivers on the Toshiba site.
    I've updated the BIOS.

    Everything seems to work, butX-(the DVD writer is recognized as "UNIDAD DVD-RAM (e :))"
    XP just a READER of CD/DVD, not recognize... a WRITER and I am absolutely sure that he's a WRITER, because I used it on Vista to burn a bootable cd.

    Someone knows what to do?

    Hello

    I think that this can be resolved very easily.
    Go to the properties of the CD/DVD (right click > properties), select the tab called record.
    There, you must activate the option called CD (mark) activate recording.

    By the way; have you tried to use a burning like Nero for example software?
    Check it!

  • Satellite M40X - DVD drive is not recognized

    I bought a new satellite pro m40x yesterday and today everything worked fine but today the dvd and cd rom is not recognized more. I don't know about cell phones, what can I do? I don't want to return it to Toshiba and wait 4 weeks to get it back.
    My son needs the notebook the week next to the school.

    Hi Christine,

    Please check in the Device Manager to see if there's anything showing against your CD-ROM drive. If your CD-ROM is always displayed, you should be able to run the process of troubleshooting against it to check for possible errors.

    If your CD-ROM is more listed and then launch the 'Scan for hardware changes' option to see if it detects your CD-ROM.

    HTH

Maybe you are looking for