AIP - SSM 40-level question.

Hello

I am trying to upgrade the AIP - SSM software file 'IPS - K9 - 6.0 - 6 - E4' in 'IPS-engine-E4-req-7.0-2 '. But it is not allow.

"Could not pass the software on the sensor.

Level the current signature is S698. The current level of the signature must be less than S480 for this installation package. »

So I tried to update the signature file less than S480, "IPS-GIS-S460-req-E3".

"Can not upgrade the sensor software be"
This update can be installed on the sensor with and the version of the 3 engine.

The currently installed engine version is 4.

There is no signature file in cisco downloads less S480 in version 4 engine.

See the version

AIP - SSM # sho version

Application partition:

Cisco Intrusion Prevention System, Version 6,0000 E4

Host:

Domain keys key1.0

Definition of signature:

Update of the signature S698.0 2013-02-19

OS version: 2.4.30 - IDS-smp-bigphys

Platform: ASA-SSM-40

Serial number:

License expires: November 3, 2013 UTC

Sensor time is 3 days.

Using 4203216896 bytes of available memory (24% of use) 1045143552

application data using 41.4 M off 167.8 M bytes of disk space available (26% of use)

startup is using 37.8 M off 70.5 M bytes of disk space available (57% of use)

MainApp N-NUBRA_2009_JUL_15_01_10_6_0_5_57 (Ipsbuild) 2009-07 - 15 T 01: 15:08 - 0500 Running

AnalysisEngine NO-NUBRA_E4_2010_MAR_24_22_44_6_0_6 (Ipsbuild) 2010-03 - 24 T 22: 47:53 - 0500 Running

CLI N-NUBRA_2009_JUL_15_01_10_6_0_5_57 (Ipsbuild) 2009-07 - 15 T 01: 15:08 - 0500

Upgrade history:

* IPS - K9 - 6.0 - 6 - E4 21:14:06 UTC Wednesday, March 24, 2010

IPS-GIS-S698-req - E4.pkg 15:44:43 UTC Sunday, February 24, 2013

Version 1.1 - 6, 0000 E4 recovery partition

____________________________________________________________________________

Any help will be much appreciated... Thanks in advance.

Liénard

If you try the software version Upgrade, try to use the IPS-K9-7, 0-2 - E4.pkg instead of the engine update package.

Tags: Cisco Security

Similar Questions

  • AIP-SSM-10 upgrade question

    I have an AIP-SSM-10 (IPS - K9 - 6.0 - 5 - E2) running inside an ASA (active failover mode / standby). I tried to put a signature update today (version S447, first time) and he said I need engine lvl 3 to update the signature and I am currently at lvl 2.

    Here's my question, what are the versions can I go to? I'm stuck with the versions of level 2 of the engine when using the AIP - SSM or can I put on until the next major release of 2.0000 E3. And is it really a good idea or not. What would you suggest?

    Also, I guess I would need to install the release .pkg file. Is this good?

    Thanks in advance!

    You can switch to the 5,0000 E3, 6,0000 E3 or one of the E3 7.0 images (x). You want the .pkg file.

    Mount the sensor in the CLI:

    conf t

    Update ftp://user:password@/ upgradefilename.pkg

    When the sensor complaines on the upgrade, just say 'yes' to go ahead in any case. This is a known bug, do not believe that the CLI.

  • silly question on module aip - ssm

    When the aip ssm module is in inline mode. fact the package first analyzed by the aip ssm module or it is first checked by the firewall rules if it is allowed and then sent to the aip ssm module.

    can someone throw some light on this.

    concerning

    Sushil

    All firewall rules are applied prior to sending the packets of the SSM.

    So if the package will be deleted by a firewall rule, the package will not be sent to the SSM.

    If the package will be changed by a firewall rule, then the change will be before being sent to the SSM.

    There are two exceptions, and this is the encryption and final release of the package.

    Encryption occurs after they are sent to the SSM, so SSM always sees a unencrypted traffic (where the ASA is encryption tunnel endpoint).

    And of course send the package by the SAA through external sound interfafes happens after the sending of the SSM.

    In the case of promiscuity, followed by the SSM, encryption and pass arrive just after that a copy is sent to the SSM.

    In the case of the line followed by the SSM, encryption and transmit occur only after that the SSM has completed the analysis and the package was not refused by the SSM.

  • Question of the clock of the AIP - SSM

    We have configured our AIP - SSM and synchronized with our command NTP servers.show clock shows the time corrcet in the CLI

    See the sensor clock #.
    16:42:35 GMT + 05:30 Sunday, March 28, 2010

    probe # show clock detai
    16:53:25 GMT + 05:30 Sunday, March 28, 2010
    Time source is NTP

    But the time indicated in the last TAB update shows the hour UTC. Even in my case logs are updated with the time information UTC only. I set the time zone correctly.

    What do I need to configure something else to update my timestamp in the event log.

    In the second version of the IPS, a new column has been added for "time sensor" in the event viewer.

  • Question on the CSC - ssm modules and aip - ssm in the ASA5500

    Is it true that the CSC - ssm and aip - ssm modules cannot coexist in the device of ASA5500 at the same time?

    Another issue is the site of cisco using the command keyword intra-interface involving NO IPSEC TRAFFIC, there are example of config/example

    It is true that the CSC - ssm and aip - ssm modules cannot coexist in the device of ASA5500 at the same time.

    It is not a sample configuration partitions on the spot yet. However, outside the control of the same security, you must the ordinary rule of translation to pass traffic. Also, because of the dynamic nature, it allows only one-way traffic. For example:

    NAT (inside) 10 192.168.1.0 255.255.255.0

    Global interface (10 Interior)

    Global (ouotside) 10 interface (is not required however)

    Sincerely,

    ~ AJ

  • Help configuration AIP - SSM

    I have two questions about the AIP - SSM.

    (1) is the ACL in AIP - SSM has any type of relations to the ASA ACL?

    2) our four interfaces are all used. Is it possible to assign the SSM an IP address in the same subnet as the management interface?

    (3) should then the management interface serve as a gateway for the SSM?

    interface GigabitEthernet0/0

    nameif outside

    security-level 0

    IP address 65.x.x.1 255.255.255.0 watch 65.x.x.2

    !

    interface GigabitEthernet0/1

    nameif dmz

    security-level 50

    IP address 172.16.x.1 255.255.255.0 watch 172.16.x.2

    !

    interface GigabitEthernet0/2

    nameif inside

    security-level 100

    IP address 255.255.255.0 192.168.x.1 watch 192.168.x.2

    !

    interface GigabitEthernet0/3

    STATE/LAN failover Interface Description

    !

    interface Management0/0

    Speed 100

    full duplex

    nameif management

    security-level 100

    IP address 10.0.x.1 255.255.255.0 watch 10.0.x.2

    management only

    Here are the answers to your questions-

    (1) is the ACL in AIP - SSM has any type of relations to the ASA ACL?

    No of years) ACL on SSM is completely independent of the ACLs on the ASA.

    2) our four interfaces are all used. Is it possible to assign the SSM an IP address in the same subnet as the management interface?

    VNA) absolutely. You can assign the SSM management port IP address in the same subnet as your managemnet interface. In this way, all management traffic will remain independent of normal DATA traffic.

    (3) should then the management interface serve as a gateway for the SSM?

    VNA) you're right... :-)

    Hope that helps.

    Kind regards

    Maryse.

  • Downgrade IPS on AIP - SSM to 6.1.1 6.0.2

    Need to know how to return to v602 once a v611 upgrade was carried out.

    The recovery partition is also v611.

    Two methods as well as a comment. The comment is that you will want to come back to 6.0 (4), not 6.0 (2) for operational use.

    [edit] The following works of generically on autonomous sensors... I missed that this is a question for the AIP - SSM. It should still work on the AIP - SSM with adjustments for the input/output "foreigner in the area.

    To recover, a reimage using one of the tftp-able images (or a CD boot if you have a sensor 4235/4250) is the gold standard to go backward. You will lose your configuration when do you and you need to re-run the installation program.

    The other way and officially it is not supported for "damages", but it works 98% of the time, is to load the recovery image - r (IPS-K9-r-1.1-a-6.0-4-E1.pkg) and then make an application partition 'recover' the level of the "conf t". This reimage your sensor and preserve the installation of the base system. You will still lose the customizations of signature and passwords will be reset to factory default, but the network configuration is preserved, so you can do it remotely.

  • installation of update of signature for JOINT-2 AIP - SSM

    Hi every one, im not sure about this issue but I think its beter ask you experts.i want to know that if I update the signature for example for my JOINT-2 can I install this update of GIS on my AIP - SSM--> assume that software IPS on both devices are same and I also installed the license key valid on AIP - SSM.now can I do this or not? and I know that if you do not license installed on JOINT-2 you cannot install any point of GIS on JOINT-2 but this topic AIP - SSM? I want to say I can install updated GIS on AIP - SSM without installed the license key valid on AIP - SSM? Thank you

    There are 3 main types of Signature updates.

    (1) IPS sensor Signature Update

    (2) updates of Signature CSM for IPS sensors

    (3) signing IOS IPS updates

    The IPS Signature Update file name is in the form: IPS-GIS-Sxxx-req - Ey.pkg

    That's probably what you are referrnig to in your message. This file can be installed on ANY device IDS/IPS or Module.

    Here, the requirement is not the platform but rather the level of the engine. The part "req - Ey" in the file name indicates that the sensor has already run the 'y' the software engine level.

    If a file IPS-GIS-S436-req - E3.pkg can be installed on any IDS/IPS device or Module as long as the software on this sensor is a version of the 'E3 '.

    The CSM updates are updates of signature for the Cisco Security Manager. They contain special files that SCM uses to update, and then also included in the JLC update is the update of real sensor described above. CSM unpackages the CSM update, updates and then uses this file embedded to upgrade the actual sensor.

    The third type of file is for routers IOS loaded with the special IOS software that has the distinction of IOS IPS where the router itself (instead of a separate module of the IDS/IPS) keeps track of the signature.

    These updates to the signing IOS IPS settle on the real router and are not installed on the Modules or the sensor IDS/IPS devices.

    So to answer your question, yes the same Signature Update for your JOINT-2 is the exact same Signature Update for your SSM modules.

    The same exact file is available through several different paths on cisco.com. But no matter which way cisco.com you have downloaded the file, you can always install it on all the Modules and the IDS/IPS Appliances.

    With respect to licensing, the license works the same on all Modules and the IDS/IPS Appliances. A license must be on the sensor for the Signature Update to apply.

    NOTE: A trial license is available at cisco.com for new sensors to allow you to get everything set up properly for your sensor to be covered by a service contract and get the standard license for the service contract.

  • Updated AIP-SSM-10 on ASA 5510

    Hello

    I want to upgrade the IPS module in an ASA 5510, and I have a few questions. The AIP - SSM is running E3 479.0 1.0000 and I have a valid account of the ORC etc for this.

    1. What is the version of the software on the question of the ASA?
    2. When I look in the software downloads< ips="" there="" are="" .pkg="" and="" .img="" files.="" i="" want="" to="" upgrade="" to="" 6.3(3)e4.="" do="" i="" have="" to="" re-image="" the="" ips="">
    3. AFAIK redefinition to wipe the device so I just reload the config after, right?
    4. I guess I can apply any update after going to E4?
    5. Can you give me links for this upgrade?

    see you soon

    Let me give some clarification on a few points:

    2. There is no need to recreate the image on the device using the .img file.  You can improve the mechanism of maintenance of your existing configuration using the .pkg file.  It is the recommended method for upgrading to Cisco IPS devices/modules.  The .img file to recreate the image should only be used to restore the default device.

    5 here are links for the upgrade of the probe using a .pkg file.  For updates through the IDM user interface:

    http://www.Cisco.com/en/us/docs/security/IPS/6.2/configuration/guide/IDM/idm_sensor_management.html#wp2126670

    For upgrades via the CLI:

    http://www.Cisco.com/en/us/docs/security/IPS/6.2/configuration/guide/CLI/cli_system_images.html#wp1142504

    Another point of clarification; current releases of IPS software supported on the AIP-SSM-10 are (taking into account you are currently running 6.2 (1) E3):

    6.2 (3) E4

    7.0 (4) E4

    You can go directly to each output.

    Scott

  • Cisco ASA 5510 + license + AIP - SSM

    Hello.

    I have this box.

    I have a few questions about it.

    (1) I'll be able to update the firmware (from 8.2 to 8.3 or greater for example) without smarnet for ASA 5510? And what can not do without smartnet?

    (2) I have only AIP-SSM-10 module this ASA 5510. is there a smartnet, too? And when I buy only one module is it build in a subscription for 1 year for the signatures of the IPS?

    (3) if I have the Cisco ASA 5510 base license, my IPS on AIP-SSM-10 will work?

    (4) as I foresee in a purchase of the year a 5510 more with the same module and mount ther of failover. I really need license Security more than failover (active / standby)? For active/active, I know I need one, Yes?

    Please help me.

    (1) you must Smartnet in order to download the software from the download from cisco.com site.

    (2) Yes, there is also a smartnet for the AIP module. Module AIP does not come with one year subscription, but you can ask for a demo license.

    (3) Yes, the basic license is OK for the AIP module.

    (4) Yes, you would need license security more on the two ASA to be able to run any type of failover on ASA5510.

    Hope that answers your questions.

  • Automatic update AIP-SSM-10 and ASA 5510 (Beginner)

    I see that it is possible to automate the updates of the ASA 5510 and AIP SSM via FTP on my own server. Is it possible to automate the download directly from Cisco.com?

    Thank you!

    Jeremy

    Jeremy, the answer to your question is correct, as far as the Cisco products are concerned. So I wrote a PERL app that does exactly that, and I published an article about it in the June 2007 issue of Sys Admin magazine. Here's the article online: http://www.samag.com/documents/s=10128/sam0706a/0706a.htm

    And it is also on my site, with a tar of scripts to:

    http://www.LHB-consulting.com/pages/apps/index.html

    Good luck.

    -Lisa

  • Cannot access the AIP SSM via ASDM

    CISCO recommendations below:

    Cannot access the AIP SSM via ASDM

    Problem:

    This error message appears on the GUI.

    Error connecting to sensor. Error Loading Sensor error

    Solution:

    Make sure that the IPS SSM management interface is up/down and check his IP address configured, default gateway and the subnet mask. It is the interface to access the software from Cisco Adaptive Security Device Manager (ASDM) on the local computer. Try to ping the address of management of IPS SSM IP interface on the local computer that you want to access the ASDM. If it is impossible to do a ping check the ACLs on the sensor

    ----------------------------------------------------------------------------------------------------------------------------------------------

    I've tried everything recommended above. I can ping the host ASDM the FW and the SSM-10 module. Well, I ping the host machine and the SSM of the ASDM. I opened as wide as possible ACL. I changed the IP addresses and masks several times. The management of the ASA port and the SSM and the PC are on the same subnet.

    A trace of package from the PC to the SSM shows that it is blocked by an ACL rule, and yet I opened wide.   I've seen this kind of problem before and it was solved by applying the double static NAT, but I don't know how to do that if all the IP addresses are on the same subnet.

    Tried everything, need help from high level.

    The IDM software that comes with ASDM does not support java 1.7. The portion of the ASDM ASA supports 1.7 but launch the IPS cmdlet works only with 1.6. The TAC enginner suggested that I use the IME (IPS Manager Express) which is available for free on the Cisco's (http://www.cisco.com/en/US/products/ps9610/tsd_products_support_general_information.html) Web site.

    I've been playing with it today, and so far it seems to work pretty well.

  • AIP - SSM recreate the image in secondary ASA 5500 (failover) with virtual contexts

    Hello guys,.

    The scenario is as follows:

    2 ASA 5500 with virtual contexts for failover.

    The ASA elementary school has the work of the AIP-SSM20.

    ASA school (which is in active / standby) has its SSM20 AIP to work now and everything is in production.

    Someone tried to configure this 2nd AIP - SSM, changed the password and lost, so I tried to re - the image (without authorized passage recovery), but the connection fails on the TFTP server, where is the image of the AIP - SSM.

    Now questions, documentation Cisco re-imaging view orders under ASA #.

    but as this scenario has several virtual contexts the ASA # shell contains no IP address as you know (which I suppose is the reason why the ASA cannot download the image from the TFTP server) and switch to another context (ASA / admin #) re-imaging commands do not work (hw-module module 1... etc...).

    What is the solution? Is there documentation for it (with security contexts)?

    Thank you very much for reading ;) comment on possible solutions.

    Yes,

    Some things to keep in mind.

    (1) run 'debug module start' on the SAA before running the command "hw-module module 1 recover boot. This will show you the ROMMON of the MSS output as it tries to make the new image and you can look for any errors.

    (2) before trying to download from the SSM, first use a machine separate download tftp from your laptop. This will ensure the TFTP on your laptop works and confirm what directory (if any) that you can use as the file location.

    (3) if the tftp download does not SSM, then the SSM is unable to properly connect to your laptop. You need a crossover cable to connect your laptop to the SSM. If you have a crossover cable, then you could try to connect the MSS and your laptop to a small hub, or configure a new vlan on your switch with only 2 ports and connect the MSS and your computer laptop this vlan 2 port.

    (4) also try the download first at the end of the gateway to 0.0.0.0 since your laptop and the SSM will be on the same subnet. If this does not work then you can try a non-existent 30.0.0.4 address as gateway.

    (5) understand that the IP address that you specify for the MSS using the command "configure the hw-module module 1 recover" is just temporary for download. Once an image is installed, then sitting at the module and run the "setup" command in order to configure the permanent address you want ure on external port of the SSM. This address in the "setup" command can the same as that used in the command 'get the 1 hw-module module configure' or a completely new (as in your case). Just make sure that you connect to the network just to what address you give.

  • The ACE IPS Cisco and Cisco ASA AIP - SSM (IPS)

    Is there a difference between the features offered by the Cisco ACE IPS and Cisco ASA AIP - SSM (IPS) devices?

    Can we do without Cisco ASA AIP - SSM (IPS) of 'only' configuration/implementation Cisco ACE IPS.

    Cisco AVS/ACE emphasis on commissioning and to secure web-based applications. IP addresses do not focus on just the web applications and trying to get the multiple layers of the OSI stack. Consider the IPS as a general practitioner and the ACE/AVS as an eye surgeon, or something :)

    Here is the response from Cisco itself:

    http://www.Cisco.com/en/us/prod/collateral/modules/ps2706/ps6906/prod_qas0900aecd8045867c_ps6492_Products_Q_and_A_Item.html

    Q: how is Cisco AVS Firewall application differs from an intrusion prevention system (IPS)?

    A. IPSs are solid solutions of protection against targeted attacks of known vulnerabilities in major platforms such as Windows, Solaris, Apache or Microsoft Internet Information Services (IIS). Cisco AVS excels to protect against targeted attacks Web sites or enterprise applications. These applications can be built custom internal applications or software vendor. Signatures and security patches are generally not available for these types of applications, and building these security levels in each application, it would be almost impossible.

    Q: how is Cisco AVS Firewall application differs by a network firewall?

    A. The Cisco AVS 3120 and Firewall network such as the Firewall of Cisco PIX® and Cisco ASA 5500 Series Adaptive Security appliances are complementary products. The application Cisco AVS Firewall secures Web applications; excellent network in the network security firewall. and the Cisco AVS provides defense in depth for Web applications.

    Firewall network apply policy networks, IP addresses and ports; they have a wide range of application for many different protocols layer features. The firewall can and will be deployed in many locations, including the edge, edge of the enterprise network, branch, etc. Cisco AVS imposed the policy on data HTTP as URL, headers and parameters. Cisco AVS is deployed in the data center in front of Web applications

    Concerning

    Farrukh

  • The AIP - SSM to unused ASA connection interface

    Hi people,

    Perhaps, someone has already raised this issue, but I was unable to find anything relevant. We have an ASA with an unused interface (gig0/3). The sensor of the AIP - SSM is physically connected to this interface with the following IP settings:

    Sensor (192.168.2.2/30,192.168.2.1)---interface ASA (192.168.2.1/30)

    It's basically point to point connectivity, and I can reach the ASA of the sensor and the other way around.

    This design is dictated by the lack of a free port on the switch.

    Technically, it should work without any problems, but I can't seem to be able to reach the sensor. There is a switch between my PC and the sensor and the switch has the corresponding static route added. I can reach the switch sensor.

    Is there a security feature hidden I don't know that prevent communication with the sensor.

    And ACL of the sensor allows the traffic to all networks (0.0.0.0/0)

    With the sensor acl set to 0.0.0.0/0, the sensor must be allowing connectivity.

    You can use the 'View of package' command on the sensor to look at packets on the interface command and control to see if the packets are what makes the sensor.

    You say that you have a static route on your switch for the switch reach your sensor. Do you know if your PC is configured to use the switch as the computer's default router. If the PC is to use a different default router, then the other router should also the static route.

    The other possibility is that the SAA itself can be deny traffic.

    Since this is an ASA connected to the MSS interface, the traffic must be routed through the ASA. Standard firewall rules apply to this traffic. The security level of the interfaces can prevent traffic, and an ACL may be necessary in order to allow the circulation of your PC be routed to the SSM.

    NOTE: If you don't want to have to worry about roads, the other alternative is to make the network between the ASA and SSM to be an isolated network that only 2 machines know.

    You can then use PAT static to map a port on the inside of the ASA interface with the address of the SSM 443 https port and map a second port of the SAA within the interfaces to the address of the SSM SSH port.

    How your home PC would simply plug the ASA IP using these specific ports and the ASA would do the translation of port and transmit on the MSS.

    The SSM address could also be dynamically PAT would have on the SAA within the address, so SSM could start the connection to other machines on the inside network.

    Another alternative if you have addresses available on your inside network IP is to use static NAT instead of PAT. And just go forward and has the ASA statically map an IP network on IP of the SSM on the network that only the ASA and the SSM inside could know.

    In both cases the network between the ASA and SSM would not routable at, and you wouldn't have to worry of reproducing static routes anywhere.

    SIDE NOTE: A separate network for the SSM you Becase you will also need to NAT or PAT address of the SSM for the ASA to outside interface. In this way the SSM will be able to connect to Internet to download cisco.com auto updates, and/or pull overall correlation of servers cisco information. It's probably the same configuration that you would already other internal addresses, and just to be sure, you cover the SSM since you have it on a separate subnet.

Maybe you are looking for

  • Why firefox blocks websites that I go to every day

    yesterday when I tried to go to the website of the library of the County of Richland, it says that firefox has blocked it - I want to know why and how I can unlock it - I searched for the answer and have not – this is the address that I tried to go h

  • Outage map mother Toshiba P10 - 504

    I recently had a major problem with my Toshiba P10-504. I have no idea how it is happened, but according to the Toshiba people who are setting the motherboard has failed. This meant that when trying to turn it on all I got was the blue light and nois

  • Opening on iPhone6 screen icons went down 1 "?

    my screen Phone6 now has opening icons on the bottom half of the screen, high is empty, although normal resume; appearance when an access point is open. How can I my screen back to normal?

  • iPhone now a paperweight?

    Hi all If you browse any other questions I asked, you will see that my phone is struggling with storage space. I was told that the update can correct the problem. My phone (in the use settings) showed I had 0 GB free, but to plug into itunes, I learn

  • the deployment of windows xp in mdt 2010.

    I have installed and configured the waik and mdt 2010 server 2008 R2. She now asked wim files to capture boot image. But in XP it is not allowing me to do this. Kindly help me on this.