AIR-AP1231G-A-K9
Hello
If the customer buys Aironet AIR-AP1231G-A-K9 done it comes with built-in or external antenna as well as the product or they need to get the antenna separately.
Please clearify the same.
In the Cisco Configuration tool also creaton to purchase the antenna separately.
Concerning
Rama
Please find details as mentioned below
Kind regards
Tags: Cisco Wireless
Similar Questions
-
Evening,
I have a number of AIR-AP1231G scattered in my factory. All are fed power inline injectors and are working properly.
I am wanting to buy a number of PoE switches that will have the task off the injectors inline for an easier game to the top.
I bought a Cisco 300 Series 10 Max PoE Switch port, however the AIR-AP1231G won't start when you plug into the switch. No light on the switch or the AP.
Oddly enough, I have an AP1242G AIR of what powers well without any problem of the switch.
Is there any configuration, I need to do on the access point so that it can turn on from the switch? The datasheet of the switch indicates that it is 802.3af. I tried the access point on the 10MP models of 28 p of the 300 series and no go.
Can someone tell me please in the right direction? I'm really lost and PoE is slightly beyond me at the minute.
Hi Tim,.
You are welcome
Yes, it's worth a try. The 1230 is shown as it is supported.
http://www.microsemi.com/PowerDsine/documentation/SelectionGuide/SelectionGuide.PDF
See you soon!
Rob
-
Set up the AIR-AP1231G-A-K9 for WGB (IOS 12.4 JA (13d)
Hello
I'm trying to set up one of our extra 1231 AP as a workgroup bridge. The AP has been configured as a lightweight access point so I think maybe that's part of my question.
It was the documentation that I found to do the config: http://cisco.com/en/US/docs/wireless/access_point/12.4_3g_JA/configuration/guide/s43hot.html
However, I don't have the available commands that they list.
Here is HS worm info:
Cisco IOS software, C1200 software (C1200-K9W8-M), Version 12.4 (13d) JA, VERSION of the SOFTWARE (fc2)
Technical support: http://www.cisco.com/techsupport
Copyright (c) 1986-2008 by Cisco Systems, Inc.
Last updated Saturday, February 8 08 17:24 by prod_rel_team
SWN-e9-wh-01-SWAP #config t
Enter configuration commands, one per line. End with CNTL/Z.
SWN-e9-wh-01-SWAP (config) #int dot
SWN-e9-wh-01-SWAP (config) #int dot11Radio 0
SWN-e9-wh-01-SWAP(config-if) #stati?
% Unrecognized command
Is it not possible with the IOS and the AP I have?
Hi Eric,.
I'm just curious, did you convert the AP to IOS already?
This can be converted to a standalone/stand alone AP you want;
Here is a method of conversion;
Returning to standalone Access Point
You can convert an access point of the mode light return to autonomous mode by loading a Cisco IOS version that supports stand-alone mode (Cisco IOS release 12.3 (7) JA or earlier version). If the access point is associated with a controller, you can use the controller to load the version of Cisco IOS. If the access point is not associated with a controller, you can load the version of Cisco IOS using TFTP.
By using a TFTP server to revert to a previous version
Follow these steps to return mode LWAPP stand-alone mode by loading a version of Cisco IOS using a TFTP server:
--------------------------------------------------------------------------------
Step 1 the IP address of the computer on which the server software runs TFTP should range from 10.0.0.2 to 10.0.0.30.
Step 2 make sure the PC contains the file access point (for example, c1200-k9w7 - tar.122 - 15.JA.tar for a 1200 Series access point) in the TFTP server folder and the TFTP server is activated.
Step 3 Rename the access point image file in the folder of the TFTP server c1200-k9w7 - tar.default for a series of 1200 point, c1130-k9w7 - tar.default of access for a series of 1130 access point and c1240-k9w7 - tar.default for a series of 1240 access point.
Step 4 connect the PC to the access point using an Ethernet category 5 cable (CAT5).
Step 5 disconnect the power to the access point.
Step 6 push the MODE button and hold the button while you reconnect power to the access point.
Step 7 hold the MODE button until the status of the LED turns red (approximately 20 to 30 seconds), then release.
Step 8 wait until restarting access point, as indicated by the LEDs become green followed the status LED flashes green.
Step 9 after the access point reboots, reconfigure using the GUI or the CLI.
I hope this helps!
Rob
-
Emission of Radio AIR-AP1231G-A-K9 power
Hi experts,
I have some of these WAP and they all high gain 8dbi antennas. I wonder if I need to adjust the 'local cck/ofdm power' to certain values to match the antenna gain for that to work the best. The radio works in b/g mode. This is the current configuration of the interface Dot11Radio0.
interface Dot11Radio0
no ip address
no ip unreachable
no ip route cache
!
SSID XXXXXX!
base speed - 1.0 2.0 basic basic-5, 5 6.0 9.0 basic-11, 0 12.0 18.0 24.0 36.0 48.0 54.0
no short preamble
channel 2412
root of station-role
threshold RTS 2312
antenna gain 8
No dot11 extensions aironet
Bridge-Group 1
Bridge-group subscriber-loop-control 1
Bridge-Group 1 protected Harbour
Bridge-Group 1 block-unknown-source
No source of bridge-Group 1-learning
unicast bridge-Group 1-floods
Bridge-Group 1 covering-disabled people
endAlso, I would be grateful if you can report a bad config under this interface. Thank you!
Hello
# You don't have to configure the power setting. You can configure any desired power value, allowing AP to offset the gain of antenna to make sure that the TX power is wrong on the FCC regulation.
Kind regards
Manual
-
I'll order "AIR-AP1231G-E-K9" and requires external antennas. I need directlty antennas linked to this no wireless access point. "AIR-ANT4941" antinna is correct for this requirement. If it's the right choice, I have to order two "AIR-ANT4941" or one order can meet the requirement of two antinaas diversity.
AIR-ANT4941 is the correct antenna, and Yes, you need to order 2 of them.
-
Aironet 1200 series - power of the weak signal near AP
I recently bought an access point of the Aironet 1200 (AIR-AP1231G-A-K9) series and the initial setup - IP configuration on the AP, the installer does a SSID and turn on the radio.
I used my laptop to connect to the SSID that I created, but to my surprise the signal strength of my SSID was only 2 bars and sometimes 1 bar and I'm within 2 feet of the access point. However, the speed of connection/signal quality was varying between 24 Mbps and 36 Mbps.
Why is the signal strength so low?
Is is because I did not buy them with external antennas?
I missed something during the initial Setup?
Y at - it an option that I have change/fine adjust in the GUI to get the best signal strength?
Help, please.
"Is is because I did not buy them with external antennas?
Yes, that's correct. There is no internal antennas on this model of AP.
You need at least one, preferably two antennas of the same type for each radio. If you have the old 'A' radio with the paddle antenna, then you only need one or two antennas of radio 2.4 G.
Good luck
Scott
-
I have a question setting my AIR-AP1231G-E-K9 access point model. I'm not familiar with Cisco technology, but I can't be able to use the hyper terminal.
Could someone help me configure my access through the hyper terminal point. I much appreciated for your help.
Thank you very much
Tauseef Ahmed
Dubai, UNITED Arab Emirates
Could any one help me to configure my access point through hyper terminal.
This should be a two-in-one document.
-
All, Hy
you have the following problem:
Convert a Cisco 1231 with (used light update tool
C1200 - rcvk9w8 - tar.124 - 21A .JA2 .tar). it worked, but now the AP issn can't join the wlc:
AP with MAC 00:11:22:33.44:55 (AIR-AP1231G-E-K9) is unknown.
* spamApTask0: 18:26:44.598 Oct 02: 00:13:c4:e7:ad:c5 connection find DTLS delete AP (172:16:22:11 / 19157)
* spamApTask0: 18:26:44.598 Oct 02: 00:13:c4:e7:ad:c5 disconnect Ctrl-Capwap-DTLS session 0x14f3b038 for AP (172:16:22:11 / 19157)
* spamApTask0: 18:26:44.598 Oct 02: 00:13:c4:e7:ad:c5 CAPWAP State: Dtls shoot
* spamApTask0: 18:26:44.598 Oct 02: 00:13:c4:e7:ad:c5 DTLS keys for deleted successfully for AP 172.16.22.11 control plan
* spamApTask0: 18:26:44.599 Oct 02: State 00:13:c4:e7:ad:c5 machine Manager: failed to process the msg = 3 State = 0 172.16.22.11:19157 type
* spamApTask0: 18:26:44.599 Oct 02: 00:13:c4:e7:ad:c5 impossible to analyze packets 172.16.22.11:19157 CAPWAP
* spamApTask0: 18:26:44.599 Oct 02: DTLS closed connection events receivedserver 00:13:c4:e7:ad:c5 (172:16:22:5 / 5246) client (172:16:22:11 / 19157)
* spamApTask0: 18:26:44.599 Oct 02: 00:13:c4:e7:ad:c5 entry exists for AP (172:16:22:11 / 19157)
* spamApTask0: 18:26:44.605 Oct 02: 00:13:c4:e7:ad:c5 entry no. AP exist in the temporary database for 172.16.22.11:19157
(* spamApTask0: 18:26:44.606 Oct 02: 00:13:c4:e7:ad:c5 throw no - ClientHello Handshake or DTLS encrypted package to 172.16.22.11:19157) since DTLS session is not established
No idea here? Thanks in advance!
What code of the controller, you're on? 1200 is not supported after 7.0 code...
Older aps, the year 1200 did not come with microphones. An SSC is created, you are sure that the SSC is enabled in the wlc and you have the SSC on the controller?
http://www.Cisco.com/en/us/products/ps6366/products_configuration_example09186a00806a426c.shtml
__________________________________________________________________________________________
"Satisfaction does not come to know the solution, it is to know why." - Rosalind Franklin -
I have a MacBook Air, I tried to clean below the space bar. I think I broke it because when I put back it together it is incredibly hard to push and I need to move so he could push. How can I fix? I just need to get a new keyboard?
Make an appointment at the Genius Bar in Apple for the service. If you need a Apple Store - find a store - Apple.
-
2 Air 10 iOS iPad dropping wifi
I have an iPad 2 air in perfect condition, since it first came out. I have the cell phone/Wifi version with Verizon. My problem has been lately, when connected to wifi, the wifi shuts on the iPad many times when using, and more so at rest.
Did somebody encounter this problem since upgrading to iOS 10 It is the only variable that has changed, I'm still using the same networks that I have always used for Wifi.
Follow these steps to find and correct the problem:
1. you must check your Wi - Fi router: check if other devices can be connected. This will let you know if there is a problem with your Wi - Fi router. You can restart your router and restart the connection to WiFi.
2. make sure that Wi - Fi on and you can see your network
3. go to settings on your iPhone > Wi - Fi and check if it is enabled. And if there is a blue check mark next to a network name means that your iPhone or iPad was connected to this network.
4 restart your iPhone/iPad, router, cable/DSL mode
5. If this does not help, reset your network. On your iPhone, iPad, got to settings > general > reset > reset network settings. This will reset Wi - Fi networks and passwords, cell parameters and VPN, and APN settings you used before.
These measures should help.
-
Cannot start new iMovie on iPad Air project
Hi, I need to do a project for my university studies, final evaluation. I'm hoping to use iMovie on my iPad Air, as I have done so successfully in the past.
This week, I'm in iMovie and click the symbol +. Then I click on the option to create a new project or a trailer. But when I click on one of these options, nothing happens. If I click Cancel, nothing happens and the application crashes. I have to then close and reopen the app.
Look at a last projects is not a problem.
Indices received with gratitude. I wonder if it's because I recently upgraded to iOs.
iMovie has been updated for iOS 10. Make sure you have the latest version installed.
-
I feel a little brain locked with dropbox on my mac air. I was running out of space and cannot say if the 150 GB on my dropbox folder actually takes this amount of room
on my HD, I tried the DB docs and cannot understand it.
of course, it does not take place timm on my iphone even if I can access all the files on my phone.
does anyone know how it works and how I would keep some data too much HD space if she does not take place?
THANKS FOR ANY HELP
If you put something in your Dropbox storage space, then you can remove it from the computer. If you do not remove it from the computer, then it occupies space on your SSD as well as in your Dropbox storage space.
-
I have an Iwatch is the first gen however updated to ios 3.0, I also have a MacBook Air, which is a 2015. I only got about 4 months. I downloaded Sierra and was very excited on my watch unlock my mac. However, it will not work.
I did every step very carefully this Apple support suggested, I spent 2 h 30 in the store with a genius and it still does not work. I was on the phone with Apple support and hung up, so Im hoping to get some help here.
Hey Molly624,
If I understand correctly, you have trouble getting the Apple Watch to unlock your MacBook Air. It seems that you have already done some troubleshooting and you have perhaps already been through this material, but just in case I recommend to read this article. He hs the steps and requirements for this feature.
Automatically unlock your Mac with your Apple Watch
Thank you for using communities of Apple Support. Have a good.
-
10 do iPad iOS 2 Air running slow
After the upgrade to iOS 10, I noticed my iPad 2 Air starts to run slowly. I mean by "slowly" as slow as my old iPad Mini 2 ran on iOS 9. It is a huge problem, and I'd rather not buy a new iPad. Any ideas?
Hi MBCollector672,
Thank you for using communities Support from Apple. Sorry to hear you're having this problem with your iPad 2 Air. I'm kinda not clear about the exact nature of the slowness you describe (what specific aspects are slow, what is compatible or intermittent, etc.), but if it's pretty repetitive, you can try to stop all currently open applications, restart your iPad, then test for the slow pace. You can find the following articles useful:
Force an application to close on your iPhone, iPad or iPod touch - Apple Support
Restart your iPhone, iPad or iPod touch - Apple Support
You can also see if applications consume an amount unusual or unexpected autonomy. Applications that do are often "stuck" in the background, consuming the CPU power (and thus battery), which can lead to slow overall system. This article may also be useful:
On the use of the battery on your iPhone, iPad and iPod touch - Apple Support
Kind regards.
-
MacBook air crashes after the release of sleep since the upgrade of the sierra
Began to notice that since I upgraded my macbook air 2015 to sierra, system crashes. The trigger is always when I wake the sleep system (whether it is by opening cover or press a key). Issue is intermittent and may not be reproduced every time. I contacted apple support and they recommended resetting the SMC (ctrl + shift + cmd) but that didn't help either. I also did a check of filesystem (fsck-fy) and which seems to be very well so.
I noticed others seem to be faced with similar problems and a common theme that I noticed was that both we seem to have an installed tardisk. Not sure if this could be a factor?
While it is not any loss of data, the question is certainly annoying and disruptive to work.
The same question was observed at about 7 times since the update of the sierra. Containing the report of Etrecheck to the breast
# Date and time 1 Kills Sep 28 10:03:09 2016 2 Kills Sep 28 18:13:50 2016 3 Fri 30 Sep 11:49:16 2016 4 1 Oct 01:05:15 Sam 2016 5 Mon 3 Oct 08:05:42 2016 6 Mar 4 14:26:03 Oct 2016 7 Sea 5 Oct 11:19:17 2016 Sea 5 Oct 11:19:17 2016
Panic report *.
panic (the appellant 2 0xffffff8004f7316e cpu): initproc is out - output namespace 2 subcode 0xa description reason: no
News of the UUID:
0 x 101425000 uuid = < a525eaea-af86-30c2-b360-3d093b4f0828 >
0 x 100713000 uuid = < 268e1319-a81e-384a-9303-67c26873038a >
Thread 3 crashed
RAX: 0 X 0000000000002210, RBX: 0X00007FFFE358C314 RCX: 0X0000700000F06BDB RDX: 0X000000010075DD1E
RER: 0X0000700000F06B30, RBP: 0X0000700000F06B70, IHR: 0X000000010075C698, RDI: 0X0000700000F06BDC
R8: 0X0000700000F06BD0, R9: 0X0000700000F06BCC, R10: 0 X 0000000004001080, R11: 0 X 0000000100756188
R12: 0X000000010075E8A8, R13: 0X0000700000F06BCC, R14: 0X0000700000F06BDC R15: 0X000000010075C698
RFL: 0 X 0000000000010283, RIP: 0X000000010143B605, CS: 0X000000000000002B, SS: 0 X 0000000000000023
Thread 0: 0xffffff80108dcdc8
0x00007fffe36b7456
Could not read the context 0x0000700000e01cd8 LR
Thread 1: 0xffffff80108e1748
0x00007fffe36bf27e
0x00007fffe3568337
0 x 0000000000000000
Thread 2: 0xffffff801558e6f8
0x00007fffe37a6214
3 wire: 0xffffff80159b8028
0x000000010143b605
0x0000000101441c7e
0x00000001014297ad
0x00007fffe358c48e
0 x 0000000100756188
0x00000001007265f3
0x0000000100725ef8
0x00000001007291cb
0x00007fffe355a128
0x00007fffe356fc10
0x00007fffe3565ad2
0x00007fffe355c966
0x00007fffe35709d2
0x00007fffe3562d41
0x00007fffe35713bf
0x00007fffe35741b0
0x00007fffe37a661f
0x00007fffe37a6221
0 x 0000000042000000
Thread 4: 0xffffff80151f4260
0x00007fffe36bf4e6
0x00007fffe37a6221
0 x 0000000000000000
Wire 5: 0xffffff8015c45e18
0x00007fffe37a6214
Mac OS version: 16A 323
Kernel version: kernel Darwin in Version 16.0.0: Mon Aug 29 17:56:20 PDT 2016; root:XNU-3789.1.32~3/RELEASE_X86_64
Kernel UUID: 622D2470-C34D-31F9-A62B-6AA9A3C6A3CD
Name of system model: MacBookAir7, 2 (Mac-937CB26E2E02BB01)
******************************************************************************** *******************************************************
Mar 4 14:26:03 Oct 2016
Panic report *.
panic (cpu 1 0xffffff801817316e appellant): initproc is out - output namespace 2 subcode 0xa description reason: no
News of the UUID:
0x1065e4000 uuid = < a525eaea-af86-30c2-b360-3d093b4f0828 >
0x1055df000 uuid = < 268e1319-a81e-384a-9303-67c26873038a >
Thread 3 crashed
RAX: 0 X 0000000000000000, RBX: 0000000000000078 RCX 0 X: 0 X 0000000000000000, RDX: 0X000000000000007D
RER: 0X00007000061AC868, RBP: 0X00007000061ACCD0, IHR: 0X00007FDF61717C40, RDI: 0X00007000061AC888
R8: 0 X 0000000000000040, R9: 0X00007FFFE56873D0, R10: 0XFFFFFFFFFFFFFFFF, R11: 0 X 0000000000012068
R12: 0X00007FFFE5688148, R13: 0X00007FDF6160FAB4, R14: 0X00007000061ACCF0 R15: 0X00007FDF6160FAA0
RFL: 0 X 0000000000010206, RIP: 0X00007FFFDB52C00E, CS: 0X000000000000002B, SS: 0 X 0000000000000023
Thread 0: 0xffffff8023eb2be0
0x00007fffdcad2456
Could not read the context 0x0000700005fa0cd8 LR
Thread 1: 0xffffff8023eae260
0x00007fffdcada27e
0x00007fffdc983337
0 x 0000000000000000
Thread 2: 0xffffff802669e498
0x00007fffdcada4e6
0x00007fffdcbc1221
0 x 0000000042000000
3 wire: 0xffffff8027112260
0x00007fffdb52c00e
0x000000010561051d
0x00007fffdc975128
0x00007fffdc98ac10
0x00007fffdc980ad2
0x00007fffdc977966
0x00007fffdc976ee0
0x00007fffdc976cb7
0x00007fffdcbc1746
0x00007fffdcbc1221
0 x 0000000000000000
Thread 4: 0xffffff802538d510
0x00007fffdcbc1214
Wire 5: 0xffffff802538abb8
0x00007fffdcbc1214
Mac OS version: 16A 323
Kernel version: kernel Darwin in Version 16.0.0: Mon Aug 29 17:56:20 PDT 2016; root:XNU-3789.1.32~3/RELEASE_X86_64
Kernel UUID: 622D2470-C34D-31F9-A62B-6AA9A3C6A3CD
Name of system model: MacBookAir7, 2 (Mac-937CB26E2E02BB01)
******************************************************************************** *******
Report Etrecheck
EtreCheck version: 3.0.6 (315)
Report generated 2016-10-05 18:58:11
Download EtreCheck from https://etrecheck.com
Time 02:31
Performance: Excellent
Click the [Support] links to help with non-Apple products.
Click [details] for more information on this line.
Problem: Computer restarts
Description:
System of maintains restart with an error "panic (appellant 2 0xffffff8004f7316e cpu)": initproc is out - output namespace 2 subcode 0xa description reason: no ".
MacBook Air (13 inch, early 2015)
[Data sheet] - [User Guide] - [warranty & Service]
MacBook Air - model: MacBookAir7, 2
1 processor 1.6 GHz Intel Core i5: 2 strands
4 GB RAM not extensible
BANK 0/DIMM0
OK 2 GB DDR3 1600 MHz
BANK 1/DIMM0
OK 2 GB DDR3 1600 MHz
Bluetooth: Good - transfer/Airdrop2 taken in charge
Wireless: en0: 802.11 a/b/g/n/ac
Battery: Health = Normal - Cycle count = 76
Intel HD 6000 graphics card
Color LCD 1440 x 900
macOS Sierra 10.12 (A 16, 323) - since the starting time: 6 hours
SM0256G SSD APPLE disk0: (251 GB) (Solid State - TRIM: Yes)
EFI (disk0s1) < not mounted >: 210 MB
Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB
Mac 500 GB internal (disk2) / [Startup]: 505,01 (Go 343,25 free)
Encrypted AES - XTS unlocked
Storage of carrots: disk0s2 250.14 GB Online
Storage of carrots: disk1s2 255,52 GB Online
Card reader Apple
Apple Inc. BRCM20702 hub.
Apple Inc. Bluetooth USB host controller.
Apple Inc. Thunderbolt_bus.
Mac App Store and identified developers
~/Library/LaunchAgents/com.example.restart.plist
sh - c ~/Desktop/TarDiskPear.app/Contents/MacOS/TarDiskPear
A unknown file found. [Check files]
/Applications/Kies.app
com.devguru.driver.SamsungACMControl [no charge] (1.4.31 - 10.6 SDK - 2016-03-01) [Support]
com.devguru.driver.SamsungACMData [no charge] (1.4.31 - 10.6 SDK - 2016-03-01) [Support]
com.devguru.driver.SamsungComposite [no charge] (1.4.31 - 10.6 SDK - 2016-03-01) [Support]
com.devguru.driver.SamsungMTP [no charge] (1.4.31 - SDK 10.5 - 2016-03-01) [Support]
com.devguru.driver.SamsungSerial [no charge] (1.4.31 - 10.6 SDK - 2016-03-01) [Support]
/ Applications/Parallels Desktop.app
com.parallels.kext.hypervisor [no charge] (11.2.0). 32581 - SDK 10.9-2016-07-24) [Support]
com.parallels.kext.NetBridge [no charge] (11.2.0). 32581 - SDK 10.9-2016-07-24) [Support]
com.parallels.kext.usbconnect [no charge] (11.2.0). 32581 - SDK 10.9-2016-07-24) [Support]
com.parallels.kext.vnic [no charge] (11.2.0). 32581 - SDK 10.9-2016-07-24) [Support]
/ Library/Application Support/org.pqrs/Karabiner
[loading] org.pqrs.driver.Karabiner (10.20.0 - 10.11 SDK - 2016-06-19) [Support]
[no charge] 7 tasks Apple
[loading] Apple 168 jobs
tasks of Apple 96 [performance]
[no charge] 40 Apple jobs
[loading] 158 jobs Apple
Apple tasks 105 [performance]
[loaded] com.adobe.AAM.Updater - 1.0.plist (2016-07-15) [Support]
[cannot] com.adobe.ARMDCHelper.cc24aef4a1b90ed56a725c38014c95072f92651fb65e1bf9c8e43c37a2 3d420d.plist (2016-07-13) [Support]
[loading] com.google.keystone.agent.plist (2016-08-02) [Support]
[loading] com.oracle.java.Java - Updater.plist (2015-12-25) [Support]
[loading] com.adobe.ARMDC.Communicator.plist (2016-07-13) [Support]
[loading] com.adobe.ARMDC.SMJobBlessHelper.plist (2016-07-13) [Support]
[loading] com.google.keystone.daemon.plist (2016-09-02) [Support]
[loading] com.malwarebytes.HelperTool.plist (2016-09-15) [Support]
[loading] com.microsoft.autoupdate.helpertool.plist (2016-08-03) [Support]
[loading] com.microsoft.office.licensingV2.helper.plist (2016-04-11) [Support]
com.Nalpeiron.NetPro.plist [running] (2016-04-30) [Support]
[loading] com.oracle.java.Helper - Tool.plist (2015-12-25) [Support]
[loaded] org.pqrs.Karabiner.load.plist (2016-06-15) [Support]
[loading] org.wireshark.ChmodBPF.plist (2016-07-15) [Support]
[loading] com.bittorrent.uTorrent.plist (2015-12-26)
[cannot] com.example.restart.plist (2016-07-20)
iTunesHelper Application (/ Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Agent application of file transfer Android (~/Library/Application Support/Google/Android File transfer/Android File Transfer Agent.app)
XMenu application (/ Applications/XMenu.app)
Carabiner application (/ Applications/Karabiner.app)
Hidden Google Chrome application (/ Applications/Google Chrome.app)
Hidden KiesAgent Application (/ Applications/Kies.app/Contents/MacOS/KiesAgent.app)
fuspredownloader hidden Application (~/Library/Application Support /.) WAS / fuspredownloader.app)
AdobePDFViewerNPAPI: 15.017.20053 - SDK 10.11 (2016-08-03) [Support]
AdobePDFViewer: 15.017.20053 - SDK 10.11 (2016-08-03) [Support]
QuickTime Plugin: 7.7.3 (2016-09-13)
JavaAppletPlugin: Java 8 update 101 build 13 (2016-08-07) check the version of
AdobeAAMDetect: AdobeAAMDetect 1.0.0.0 - SDK 10.6 (2016-07-15) [Support]
MeetingJoinPlugin: Unknown - SDK 10.2 (2016-09-28) [Support]
tblive-4: unknown (2016-10-03)
Adblock more - Eyeo GmbH - https://adblockplus.org/ (2016-09-28)
iTube Studio - iSkysoft Studio - http://www.iskysoft.com (2016-07-19)
Open in Internet Explorer - Parallels - http://www.Parallels.com/fr/ (2016-07-24)
Java (2016-08-07) [Support]
Automatic backup: YES
Volumes to back up:
Mac 500 GB internal: disc size: 505,01 GB disc used: 161,76 GB
Destinations:
TOSHIBA EXT [Local]
Total size: 1.00 TB
Total number of backups: 17
An older backup: 24/01/16, 02:55
Last backup: 22/09/16, 17:07
Size of backup drive: adequate
Backup size 1.00 TB > (disc 161,76 GB X 3)
18% Google Chrome Helper (8)
8% WindowServer
6% mdworker (15)
5% of Google Chrome
3% kernel_task
Top of page process of memory: ⓘ
Google Chrome Helper 655 MB (8)
631 MB kernel_task
Mdworker (15) 201 MB
119 MB Google Chrome
Console 111 MB
49MO RAM free
3.95 GB used RAM (647 MB cache)
2 MB used Swap
October 5, 2016, 18:42:55 ~/Library/Logs/DiagnosticReports/QuickLookSatellite_2016-10-05-184255_[redacted] .crash
/ System/Library/Frameworks/QuickLook.framework/Versions/A/Resources/quicklookd. e app/Contents/XPCServices/QuickLookSatellite.xpc/Contents/MacOS/QuickLookSatellit
5 October 2016, 12:43:53 self-test - spent
October 5, 2016, 11:19:17 /Library/Logs/DiagnosticReports/Kernel_2016-10-05-111917_[redacted].panic [details]
October 5, 2016, 11:02:31 AM/Library/Logs/DiagnosticReports/Microsoft Outlook_2016-10-05-110231_ [redacted].cpu_resource.diag [details]
/ Applications/Microsoft Outlook Outlook.app/Contents/MacOS/Microsoft
October 4, 2016, 14:26:04 /Library/Logs/DiagnosticReports/Kernel_2016-10-04-142604_[redacted].panic [details]
October 4, 2016, 10:31:37 AM/Library/Logs/DiagnosticReports/Microsoft Outlook_2016-10-04-103137_ [redacted].cpu_resource.diag [details]
3 October 2016, 11:50:06 AM/Library/Logs/DiagnosticReports/Installer Progress_2016-10-03-115006_ [redacted] .crash
com.apple.Installer-Progress-System/Library/CoreServices/installateur Progress.app/Contents/MacOS/Installer progress
3 October 2016, 08:23:05 AM/Library/Logs/DiagnosticReports/Microsoft Outlook_2016-10-03-082305_ [redacted].cpu_resource.diag [details]
3 October 2016, 08:05:42 /Library/Logs/DiagnosticReports/Kernel_2016-10-03-080542_[redacted].panic [details]
October 1, 2016, 01:05:15 /Library/Logs/DiagnosticReports/Kernel_2016-10-01-010515_[redacted].panic [details]
September 30, 2016, 11:49:17 /Library/Logs/DiagnosticReports/Kernel_2016-09-30-114917_[redacted].panic [details]
September 28, 2016, 18:13:50 /Library/Logs/DiagnosticReports/Kernel_2016-09-28-181350_[redacted].panic [details]
September 28, 2016, 10:03:09 /Library/Logs/DiagnosticReports/Kernel_2016-09-28-100309_[redacted].panic [details]
If you have Bluetooth enabled, turn it off before going to sleep the computer.
Maybe you are looking for
-
Hello AppleScript and Automator Pros!
-
Downgrade HP Pavilion G6 2300st of Windows 8 for Windows 7. No driver?
Hello We bought a HP Pavilion G6 2300st to our parents with Windows 8 is installed. Unfortunately, they have some diffuculties with Windows 8. So I thought that we had to downgrade to windows 7. I tried to install Windows 7 on last night and I was no
-
HP G62-363NR with Windows 7 64 bit, FN key driver/software required.
Hello!I installed a clean Windows 7 64 bit on my laptop HP G62-363NR. I don't want to install all the HP programs EXCEPT the one that I need to be able to use the FN key. So far, I've tried HP Quick Launch, HP, HP Advisor and HP Support Assistant sof
-
All connections are ok, but my printer does not print why?
After selecting a page, when I print option NOTHING IS PAST IN MY PRINTER why? I like this several times... What do I do? -Sebastian
-
T series Internet download charts
Can someone tell me what I can do to correct a problem where my camera will not completely download internet graphic design? Do not download the background graphics and text and often I would quess where they are found on websites?