Air-cap2702i-a-k9 flashing blue and red, suggestions?

Similar Questions

• Webcam on Qosmio F60 flashes blue and Red

  Hi guys, I have a Qosmio F60. The problem, I think that I am facing right now, it of the flashes between blue and Red webcam for awhile and goes back to blue. And it's kind of hot behind the webcam on the laptop cover.

  Is it supposed to become hot when I make video calls?

  And what could be causing the flashing of the led light for the webcam.

  Hello

  Don t know exactly what the blinking led could mean but I have a question;
  The webcam works properly? Can you use this as supposed?
  If Yes, then I wouldn't be worried

  Incidentally that cam should not get hot, I think the FL inverter that is placed behind the screen is hot, but it's ok.

• If make it my video it flashes yellow and Red logos added. My computer is Mac...

  If make it my video it flashes yellow and Red logos added. My computer is Mac...

  Thanks, Neil

  I upgraded my Mac OS El Capitan and now everything was normal again

• Flashing green and Red pixels

  Hey, guys!

  I'm new to the forum and I apologize in advance if there is another thread with the same problem. I wanted to just share some pictures and maybe get answers to my problems. As mentioned in the legend my macbook air that I bought last year has green and Red pixels flashing on the screen. It covers just a vertical strip of 3-4 cm on the left side. It does not affect the performance but it gets really annoying. Im guessing there is something faulty with the video card or the matrix of pixels.

  Here are some photos: https://scontent-vie1-1.xx.fbcdn.net/v/t1.0-9/13237711_1269211393091692_22297742 29739562934_n.jpg? oh = aedf6434da04f4dbdb6... and https://scontent-vie1-1.xx.fbcdn.net/v/t1.0-9/13239870_1269211399758358_20321648 26971687538_n.jpg? oh = cac08d41fe32ec25fb1... .

  Anyone know what seems to be the problem? In addition, the 1 year warranty covers these dysfunctions of the material? And how long would it take for the apple service center to fix it?

  Thank you in advance!

  See you soon,.
  Vasil

  It looks like a bad graphics card. Bring any Apple store, it must be covered under AppleCare.

• Yellow, blue and red lines on my video projects.

  I have problems with my Premiere Pro video software because there are yellow and red lines going through the videos. When I export the project, you can see the lines in the video. I have two hypotheses, either my infernal and external hard drive is almost full, or it happened after I downloaded Capitan.Hop El I can help

  Issue with El Captian, turn off the MPE material in project settings for now.

• Photo of reminder on the monitor with the vertical strips/stripes blue and Red

  Play a clip in the timeline, the monitor and the xetrnal monitor shows the clip with thin red vertical lines/bands at constant distances.

  The AVI in body 5.5 clip plays, I imported it to the 5.5 even as asset, but playing the AVI in still image is distorted, as mentioned.

  I work in PAL.

  Anyone suggestions what's happened and how to eliminate the distortion? Thanks for the reply.

  Chris

  If you have an nVidia graphics card, and then set the 3D settings 'let the application decide '.  Vertical scratches should disappear.

  -Jeff

• m8200n crashes, blue screen, freezes, power light flashes blue in Sleep Mode!

  Hello world! I have the HP m8200n and similar problems for a year now such as published by other people with the Black Out of the screens, screens blue and gel. I did a lot of game online lately and installed a video card, better food, added a GB of ram and a Blu - ray burner and also added some fans inside. I am still using the Windows Home Premium 32 bit OS that comes with it, and all the software is always up-to-date. Only thing I noticed what happens regularly is when the black screen, blue screens or freezing is usually just after I wake the computer from sleep mode. Then I usually attempt to restart it places several times until finally, it starts and works without any problem. Of course, I ran the diagnostics and all past. But just recently noticed when I put my computer into sleep mode, the front power led does not more change to amber color, it just flashes blue and turn off without reason. He always wakes normally when I move the mouse, and the blue light comes on and when I put it in mode 'sleep' it goes back to the blue flashing light. In addition, when I start to play online the rear case fan begins to spend a quick back and forth and then at normal speed. Usually, I try to blow and clean up so much dust that I can possibly do. But I wonder if these are all signs that my computer is about to fail completely? No matter how useful counsel that it would be VERY, VERY, very appreciated!  Thank you!

  I have same m8200n and same night Mare, I pulled out one of the ram sticks first the left right and fixed it

• Flashing blue/black screen on installing the VM - Windows Server 2012 RC tools

  Hello

  I have a problem with the installation of the tools from the virtual machine to a new server RC VM Workstation v8.0.2 2012 both 8.0.3: when the graphics driver is installed the machine virtual display flashes blue and black and can not be recovered.

  Reboot safe mode allows the virtual machine to start with a working screen, where to find VM tools apparently not installed. I then had success removing the VM graphics card and from the virtual machine as usual. VM tools then displays correctly installed in the virtual machine, but there is no VM card in Device Manager.

  I tried the suggestion here (http://communities.vmware.com/message/2059062#2059062) nothing works.

  Someone at - he managed a successful VM Server 2012 RC tools installation?

  See you soon,.

  Conan.

  I had this same problem when installing Server 2012 RC x 64 on my new machine simply active and virtual 3D graphics acceleration in the preferences of the VM.  This solved my problem.

• TOSHIBA PX1267E - 32 1 external HARD drive does not: seeing flashes blue/red

  Dear reader,

  I have a drive external HARD of PX1267E - 1 32. It worked fine for a year or two. Now, it started to malfunction.
  The light which should show current data traffic, now blinks red/blue (by changing half a second). When I connect it to the PC, it is a sound of connection, and a sound to unplug a few seconds later (it continues to repeat this once in a while).

  Anyone know what is happening, or what I need to do? More importantly, I need to know if it is worth fixing and if its even fixable.

  Thanks in advance!
  Freek

  Same here with my drive toshiba 320 GB external hard... S/N: 1103060475 / PX1223E - 1 32

  It just happened last week. All of a sudden you hard drive went from blue to red.
  And the computer no longer recognizes.
  So it worked out perfectly. No problem at all.

  Looks like it is a problem in Dutch? And that's happened with Freek and me at the same time?

  How can recover us information that is still on this subject.
  Because the case where the hard drive is there... just can not be opened.
  So we can't pull the hard drive from the case.
  Someone at - it also have a useful answer in this one?

  After you install a new device driver, it is also always recognizable not on my pc.
  Toshiba Harddisk can be seen in my computer, but played cannot enter or read data about...
  It works, but no data is recoverable more because of a problem in the i/o device so he says...

  Who can help us both... because it looks like I have and Freek have the same problem, and both live in the Netherlands. ;-) Perhaps both a bad Live Essentials Windows Update done?

  Unfortunately, the warranty is just late (1 year) because it was only guaranteed for 2 years
  So, it's no choice more :(

  Please advice us ;-)

  -How we recover the data on it. Brand, it works again?
  -How to open the hard disk to retrieve the disk and put it in another case...

• framed color box color changes randomly - with red, blue and yellow

  Hello

  I want the user to do something when the color box changes from black (ready) to green (together), then red, yellow or blue (go). The user wil know what colors come to them.

  The user will will push a specific sequence of buttons depending on the color.

  Success will push the sequence of buttons assigned to a specific color. There are 16 push buttons. (this is to recall and response time)

  In any case, I can write the program without problem.

  The user can test red (push a specific sequence of buttons according to red), then blue and yellow. I can get to repeat a color so they will make four tests.

  Sorry for being long-winded.

  My question is how I randomly generates a color to begin a trial.

  If this set of tests is unclear by the subject on go the color was presented randomly as a guest.

  Any help would be greatly appreciated!

  Thanking you in advance,

  NK

  If you have a fixed set of colors, put them in a table and generate a random number between 0 (Array Size-1) and an element of the matrix of the index. Multiply the random number (0-1), multiply by the rounded and maximum value at most closely to get your index.

  If you want to generate a truly random color, use the RGB color VI and wire 3 random numbers between 0 and 255 to generate a random red, green and blue component like this:

  

• Inserting a Flash Drives and cell phone causes blue screen - stop 0x3B

  Original title: inserting a few Flash Drives, but not all, and cell phone causes a blue screen of death

  Computer Dell Inspiron 518 Intel core 2 quad, 6 GB memory, office 2 years.
  HP Vista 64-bit, Service Pack 2, updated version 6.0.6002 fully implemented.
  No change to HW or SW immediately before the first detected failure, but the USB port which is not often used.
  History - off Ready Boost after a short experience and installed months ago driver and card Renesas Electronics USB 3.0.  This driver has been disabled through all of this, but I've not yet physically removed the card.  Disable ready boost was simply to stop - no other instructions not found for removal.

  Anitvirus BitDefender and Malwarebytes scans are both clean.

  A flash drive works fine, but three others cause seconds blue screen of death after installing into any USB port.   Bought a new flash drive and it also causes a crash.  Found cell phone also gives BSOD.  All work fine on another computer.  USB is currently led printer, external hard drive, digital camera downloads and keyboard/mouse very well.  Tried both USB ports with the same results and back and disconnected all other USB devices except the keyboard and mouse.  Remove and reinstall all USB drivers (6) one by one (the 1CH9 Intel USB controllers host family) and USB controllers enhanced (2);  also storage device USB and device drivers USB Composite and façade drivers card reader.  After each new facility, any 'bad' flash player causes immediate crash.  'Good' flash player's Centron Centon Pro 8 GB and one of bad flash drives is one attached PNY 8 GB, another a San Disk.  I think, but I don't remember, that the 'good' flash player was installed for Ready Boost test.

  Unable to find a failure code or no trace of several accidents in the problem reports.   Here is all the data of failure that I could find:

  0x0000003B
  (0x00000000c0000005)
  0xfffff8002a8db87
  0xfffffa601

  I'm puzzled.  Thanks in advance.

  Tom

  Hello

   
  You must update the BIOS (Basic Input Output System) and the Pilots of the Chipset using the computer manufacturer.

• I'm unable to access my skydrive account, I get my user id and password but when I try to access the skydrive page it just flickers and flashes a canned red shield in the address bar.

  I'm unable to access my skydrive account, I get my user id and password but when I try to access the skydrive page it just flickers and flashes a canned red shield in the address bar. I managed to go into the live account and change the password, so I know that the connection details are correct. I can access my hotmail account.

  I signed up for skydrive two days ago and have loaded the documents that I cannot now reach!

  original title: skydrive connection problem

  Forum on SkyDrive here:

  http://windowslivehelp.com/product.aspx?ProductID=6

• Green, green and red flashing lights

  Can someone tell me this that green, green and red flashing lights on an access point 3602 indicates?

  Thank you

  Chris

  AP attempts to discover a WLC (CAPWAP discovery in the process).

• How to add the Norwegian language to my ipa file in Adobe Flash Professional and AIR settings

  Hello

  How to add languages Norwegian to my file API in Adobe Flash Professional and the parameters of AIR?

  Norwegian users get my apps in English rather than Norwegian. Desperately need help!

  Cordially Ylva

  If it's a question about location, then this thread: Re: how to locate the name of the application into an air ios app? discusses explains how to add the Danish language, which is not localized to be default.

• My air led is orange flashing

  MY air game is orange flashing instead of stay green. What is the problem

  Wifi hotspot: understand and resolve a blinking amber status light - Apple Support