Air iPad Bluetooth headset

Similar Questions

• I'm looking for a bluetooth headset that connects to both my iphone 6 and my air of ipad.  I have a Bose bluetooth connection that does work on my ipad.  Any recommendations?

  Recommendations for a bluetooth headset that works on the iphone 6 and ipad air?

  Most helmets will pair at least 2 sources; Check the manual of your Bose can also. But you must pair it both, and you must manually switch the connection when switching from one to the other. It can only connect to one at a time (this is a BT Protocol limit). I have a headset of parrot Zik that pairs up to 5 sources (I use it with 4).

• loss of control ipad (screen magnify in-app Youtube kids) when you use a bluetooth headset

  loss of orders for ipad from tap - specifically screen expand in the Youtube kids application when you use a bluetooth headset

  I would contact with the helmet manufacturer or the helper application developer. Maybe it's that the app may need to be updated.

  Barry

• Can't associate my Sennheiser Bluetooth headset with my Verstuurd vanaf mijn IPad Pro and IPhone 5 s

  Can't associate my Sennheiser headset to my Verstuurd vanaf mijn Ipad Pro and my IPhone 5s.

  They ore well on my IPhone 4S and the Ipad 2.

  whatncan deceive you?

  to associate a bluetooth headset device that it has not been paired with before putting the headset in discovery / pairing mode your sennheiser manual should describe how you are going to do

• My iPad Bluetooth Air sees my iPhone 6s but not connected.  Help?

  MY iPad Bluetooth Air sees my device - iPhone 6s - but does not connect.  Help!

  You try to use hotspot?

• Notification by email to the phone and not headset/Bluetooth Headset

  I have an iPhone6 and whenever my bluetooth headset is connected, my notifications by e-mail through the headset and not via the phone.  I need to call to keep giving me the notification and send it through the headset.  Often, I have my phone and the headset on my desk and will not hear the notification.  I'm pretty sure I could change this once, but can't remember how.

  Maybe you have active AirPlay? Swipe up from the bottom of the screen to display the command center and ensure AirPlay is disabled.

  How to use AirPlay on your iPhone, iPad or iPod touch - Apple Support

  Also, go to settings > general > accessibility > routing of Audio calls > and set it to automatic.

• Bluetooth headset blackBerry 10 BB10 and Sony stereo

  Hello

  I am looking to buy a stereo bluetooth headset to complement my classic BB and I saw that Sony has a range including SBH20, SBH50 and SBH52. Anyone know if these will work with BB10 and if there is no limitation of their features when used with BB10

  Thank you

  An update my post, I just went ahead and buy the headphones SBH52 and they work very well with the BB10, including all music controls LED display showing the track is on the air and the phone number in dialling mode.

• Cisco IP Communicator with Bluetooth headset has fast battery drain

  Hi all, hoping to exploit the collective knowledge here to find an answer to a question that we live with bluetooth headsets with quickly draining the battery.

  Environment: We run Cisco UCM 10.5 and have some users with Cisco IP Communicator 8.6.4.  Computers are a mixture of office/computer laptop with Windows 7 32/64 - bit.  Most are bluetooth headsets, Plantronics Voyager legend UC with some older models of Plantronics.  These use a bluetooth dongle separated with flag State.  This helmet is announced as having 7 hours of talk time and 10 days standby.  Plantronics software is set to Audio enabled detection and headphones to maintain for PC connection as it is disabled.

  Behaviour: Normally, when the bluetooth headset is not in use, the light blue and the helmet is considered as standby.  When a call, the indicator light is a slow blink showing the helmet is in active use.

  Question: When not in a call, or when the CPIC is even launched, the indicator light is a blue blicking and users can hear 'air' in the helmet, even when not off the hook.  This led the helmet to be in Active mode and thus draining the battery at a higher rate.  Even if option software Plantronics headphones maintain link PC is off, it acts as if it was.  The only way that we were able to work around this problem is in the Plantronics software to disable Audio detection enabled.  This leads to the user needing to press the answer on the headset button and the answer button on the software phone which isn't ideal if users are up and on.

  So having said all this, is there a resolution to allow the headset to use with CPIC without the helmet being still active?

  It comes to video over IP, please move to the appropriate area.

• Can I connect the watch or Bluetooth headset at the same time?

  The watch or Bluetooth headset (maybe a pair of the Airpod) connect at the same time?

  I have iPhone 6 now and will update to 7 earlier.

  I do it all the time with my iPhone 6. I assume you mean to plug the headphones into the iPhone, right? Whatever it is, you can connect to the phone or watch.

• How to use a Bluetooth headset to make phone by Apple Watch call?

  My question:

  my iPhone is on the platform to the floor. I'm in the garden, away from my iPhone, outside of the coverage of bluetooth. However, I'm on my WiFi network so my Apple Watch is connected to my iPhone via WiFi.

  I get a phone call on my iPhone at home and my rings Apple Watch on my wrist in the garden. I answer with the watch, but I would like to continue the conversation by using my bluetooth headsets, which are associated with my Apple Watch...

  Is there a way to do this? As far as I can see, bluetooth headsets can be paired with Apple Watch to listen music stored Apple Watch...

  Tnxs.

  Hello

  It is not possible to use a Bluetooth headset that is associated with Apple Watch in order to pass or receive phone calls.

• Pairing Bluetooth headset with Apple Watch 2 series?

  Hoping that someone here has some good ideas, so I can avoid having to go through the centre commercial/Apple Store!

  Bought a watch series 2 the day of the launch, immediately tried to pair with the bluetooth headphoens I got (AvierBTE somethings). No luck. Thought maybe I just got bad headphones - but they always associate with my iphone 6 s. bought a pair of Mswift Pow helmet off Amazon and bluetooth headset at the same time borrowed a friend this pair with its original Apple Watch. My Mswifts, or his headphones will pair with my watch, although the two pair with my iphone.

  My watch IS pair with my amazon echo - so I know the bluetooth works.

  The watch is the headset in discovery mode, but when I try to pair, it gives an error and says it cannot associate, check that the camera is turned on, in range, etc..

  Another person had problems of this kind and has managed to find a solution?

  Hello

  Make sure that you follow the instructions for pairing here:

  Use the Bluetooth with your Apple Watch - Apple Support Accessories

  It can help to turn off pairing your headphones for your iPhone (or any other device that they can already be coupled to) before their pairing at your watch.

  It can also help when you try to pair your headset with your watch, to move the two devices to another place, away from any device Bluetooth can be active.

• IOS error 10 Bluetooth headset

  Hello

  Since I've upgraded to iOS 10 on my iPhone 6, my quick mpow Bluetooth headset does not work as Hey used to. When I turn on, they automatically connect to the iPhone and I get the small icon beside the battery meter indicates the State of charge, however, they do not appear as an audio device in spotify, itunes or other audio applications.

  Only the way to solve it is to "forget the device" and re-pair the helmet - pain in the * when to go to the gym, etc.

  I tried to reset the network settings according to another post on the forum, but there is no reaolve the question.

  Any ideas? She must have iOS 10 as they worked perfectly well until last week and I tried it on my iPod touch 4th generation and they work perfectly.

  Thank you

  I have this problem also with a SoundPeats QY8. I think it's a bug of iOS 10 because he was allowed in the iOS 9.

  In order to obtain the device name displayed for audio playback, one solution is to click on the name of the device under Bluetooth settings after it is already connected, which is a useless chore.

• update of iOS 10 listed is not on Air iPad

  When I go into my settings on the Air iPad app, it says I'm up-to-date with 9.3.5. There is no option to download iOS10.

  When I plug my iPad to my mac, it downloads the update in iTunes but will not install because the macbook isn't anywhere close to enough space for the backup of the iPad first. (Despite already be saved in iCloud.)

  So I'm stuck.

  Is there a way to make the update appear on the iPad for on-line downloading? Or y at - it a way to install first of the macbook without backup on the computer?

  In addition, earlier I was enrolled in the public beta for the new updates. Can pose problems with iOS 10 appears there?

  Just guessing, but a reboot is never bad. Hold down the sleep and home buttons until you see the Apple. Do you have enough free storage on the iPad? Incremental download during a concert and it probably extends to 2 or more, so you need 5 or so without doing the update.

• AirPlay only list bluetooth headset after the connection

  Hi all

  I wanted to see if it's just me or other people see this. I use iPhone 5 that I've recently updated to iOS10. In my daily use, I connect headphones bluetooth (4.0), MPOW Swift is the brand, to listen to music or watch YouTube videos. With iOS 9.x I never had a problem with the headphones recognized and used by all applications via AirPlay immediately. With iOS 10, which is not true. They connect as I see the icon in the status bar of the phone and Bluetooth settings section says that it is connected but when I go to music app and click on AirPlay they are not listed. I found to solve the problem, I must forget the device to the headphones and then repair and immediately their names still AirPlay and sound comes from the app through the headphones. This is the best though, if I turn the headset off power (disconnect device), then reconnect, I'm back to the same problem where they do not appear in the AirPlay and I pairing again.

  Anyone else see this problem? Unfortunately, I don't have another bluetooth headset to test this.

  Thank you!
  Jeff

  I'm having the same issue. It happens with all my Bluetooth devices. The Bluetooth is connected, as indicated by the icon in the status bar, and the said device. But music, iHeartRadio etc. play via speaker phone. Curiously, the phone works via Bluetooth and the active key Siri is not a problem of Bluetooth.

  I did some research and tried to reset my network settings as recommended without result. Now whenever I turn in a Bluetooth device, I have to connect manually if I want to use it for anything other than the functions of the phone. Very annoying.

  Apple, any suggestions?

• my air ipad storage is almost full. How do I purge of the less important items? Y at - it app to serve the music and pictures in double?

  My air ipad storage is almost full.

  How do I purge of the less important items?

  Y at - it app to serve the music and pictures in double?

  How can I keep on my ipad apps that are shared by other devices?

  First, have you checked when most of the storage used for?

  Check your storage space on your iPhone, iPad and iPod touch - Apple Support