Air iPad does not illuminate
The symptom is more simply not turn on:
It happened a few times before (within two weeks) that the ipad just froze and turned the icon apple black and white background. After working in the home/power together for a while, he fixed the situation. Last night, the white background happened again and I tried both home/power buttons. But he remained in an infinite loop power. Then I went to bed. This morning I loaded for more than an hour and just, it does not turn on, not even the white background.
If I take her to the store, be something beyond? The warranty has expired, so if a part needs to be replaced, it might be expensive and I prefer to buy something new.
Have you tried to restore the device? If you do not have an appointment at the Genius Bar, they will examine and diagnose the unit free of charge. From there, they will provide you with options. They do not repair the iPads, they replace them with refurbished appliances. If the warranty has expired, the elimination of costs of replacement warranty applies. That depends on your location, but you should be able to get an idea here. Apple - Support - Service Response Center If this isn't the case in the United States, you must ensure that you change your country in the drop-down menu. If you after registration, you can always buy a new device.
Tags: iPad
Similar Questions
-
I spilled coffee on my Macbook Air and does not illuminate. How to transfer files from the external hard drive to backup my new Macbook Air?
If you had a Time Machine backup, you can use the Migration Wizard and connect your new Mac on the external drive which has the Time Machine backup: move your content to a new Mac - Apple Support
-
the Air iPad does not connect to a printer to air even if the two are on the same network
DIIAP Air does not connect to air printer, even if the two are connected to the same network. Message "Air printer not found".
Readhere: printing from your iPhone, iPad or iPod touch - Apple Support
-
Hello everyone,
I have an iPad Mini 3. Today, as I turned off my iPad because an application crashed at different times. But once I turned off my iPad I could not turn it back on, even though I tried to reboot the iPad more than once with mode 'emergency', held at the home and power keys. (I even tried to charge it, but the problem does not have to be the battery). If I press the power button, the Apple logo appears, but then after about a minute it disappears and I can repeat this action but nothing happens. I also tried to connect the iPad to my Mac, but it seems that nothing is connected.
Anyone has an idea on what I need to do? Thank you very much in advance!
Hello Beasalby,
Try to put your device in recovery mode by following the instructions in this link If your iPad, iPhone or iPod touch won't turn on - Apple Support after that you did restore through iTunes.
Hope that solves your problem
-
I can't connect my wifi iPad air. I tried;
Reboot & force restart
Reset network settings
Connect the iPad to my Mac.
I can't do a software update to 9.3.2 (without wifi). Seen on another thread to remove this update under settings > storage management. Tried, did not help. When I try to check the updates, I get this message "an error occurred while checking for a software update".
Something is blocking your access to the update from Apple servers. Update iOS has never worked in this place before? Have you tried to use iTunes to update to iOS?
-
My MacBook Air does not illuminate
MY MacBook Air does not illuminate?
Nothing happens when you try?
Power light?
Tones? Startup chime?
If you connect to the charger, which is LED color on the card?
-
13-inch early 2011 macbook pro. light green mag extremely shoddy security cordon, macbook pro stopped charging bought new magsafe. and the led does not illuminate or strings. SMC reset now mac does not recognize battery. disconnected the battery and security cordon mag, maintained hold button / stop for 5 seconds, nothing. Another SMC reset and it is the only way Mac powered on that she has no back light for the keyboard and the fan works on high all the time, please can someone HELP, thanks.
This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.
-
iPhone 6 with iOS9.3.4.
WiFi button does not illuminate. I rebooted the phone. How can I make this button of the device?
You can always update your firmware with iTunes. But it seems you might have a larger, likely hardware problem with your phone.
Try to restore the firmware with iTunes. If this does not help, make an appointment with a genius at the Apple Store.
-
MY iMAC, which is several years old does not illuminate
Take the test/diagnosis. Nobody here can 'pull' hardware problems.
Barry
-
2009 iMac 21.5 does not illuminate
My 2009 iMac monitor is black and does not illuminate. It has been connected to different computers, macbook pro and a mac mini with the same result. Is there something that can be done or is it just toast?
Try to zap the PRAM or reset the SMC.
Board: https://discussions.Apple.com/docs/doc-3603iMac SMC and the PRAM reset
Otherwise, take the model to your local store from Apple or a DAD.
-
New Ipod Touch does not illuminate
Buy IPod Touch last summer (August 2015) and died this morning. Can not activate it or it will load. Any suggestions?
Try the following steps:
- Press and hold the home and power buttons at the same time for at least 15 seconds until you see the Apple Logo.
- If this does not work, load your iPod for at least 10 minutes, or until the Apple logo appears.
- If none of the steps above do not work, here is a link to give you more information: If your iPod touch does not illuminate
- Be sure to contact the Apple support if you need more help.
Good luck!
-
Toshiba 40 L 345 * DB does not illuminate
Hi guys,.
I wonder if someone can help me. I have TV model, above, that does not illuminate. His age of only 18 months. the power switch flashes between grreen and Red intermittently every seconds.
Any thoughts?
Rgds
Kedders
Hi Kedders,
I just encountered the same problem. While watching the TV, it shuts down suddenly. Even model & 18 months and now dead. If I leave it plugged in now, we get the same thing - the power switch flashes between green and Red intermittently seconds or - but no picture at all.
What's wrong?
Kind regards
Chris_UK
-
Satellite Pro C660 does not illuminate
Satellite Pro C660 does not illuminate. no noise, no light just fill out the dead.
any suggestions?
Hello
On this virtual path, it is not possible to provide an accurate diagnosis. All you can do is to unplug the power plug, remove the battery and leave it for a while. Then press the power button and hold it for 15 or 20 seconds.
After doing this connect the power running and try to start again.What happens when you do this?
-
3rd gen iPad does not load only red battery
My iPad suddenly not charge or sync. I only get the empty red symbol and or the Apple logo when I unplug and re - connect the charger cable. It will not turn on. I use the same USB cable comes with the iPad and have also tried my iPhone cable with my iPhone AC plugin but the results are the same. I had each cable connected for 24 hours and nothing. The iPad is not recognized by iTunes is indicated anywhere on the computer with one small exception. When you use the USB cable to charge/sync with my computer I get a message window telling me new iPad software version 9.3.1 is ready for an update, but when I click on update I get a message error "iPad cannot be synchronized. An internal error has occurred"and"an unknown error occurred (-50). My iPad does not appear as a device on iTunes. I tried to do a reset by pressing the sleep/power button & the big button on the screen, but nothing happens.
Thanks for any other suggestions to get this ipad works again
Have you tried the steps outlined in the article below? If so, I would recommend taking the iPad at the Apple Store for the assessment.
If your iPhone, iPad or iPod touch does not respond or won't turn on - Apple Support
-
Satellite L500-1DT does not illuminate
My laptop does not illuminate unless the switch the off market cable is disconnected and the connections are bridge on the motherboard. Any suggestions please?
You start your mobile phone if the battery is removed and the laptop connected to the power supply current only?
Maybe you are looking for
-
How to fix the error of Labview 2016 (32-bit) on Windows 10 database.
Hello I have software to read/write of labview (32-bit) database, which works fine on windows xp 2000 / 7 (64-bit). But it is not stable 10 (64-bit) Windows at all. It pops up an error on most of the time. Please see the attached database VI. After
-
CFS3 hangs upwards and will not stop running.
CFS3 worked fine with Vista, but began to hang. Upgraded to Win7 and it worked fine until I defragmented the drive and now it freezes and will not be cut. I even removed the CD and rebooted the system, and I can't restart the game because it tells an
-
Internet shortcut Shell Extension DLL
What is "Internet shortcut Shell Extension DLL? Sometimes when I try to install a new program, I get the message: "How do you want to open this file? Then, it shows a screen with the message "Internet shortcut Shell Extension DLL." But when I click i
-
The songs are a random mix of many / most of the albums that I backed up on my system. What happened twice, but the second time that the kitten was not involved and the list, various songs from the first game, just showed. I really like this and I
-
Got this from an estate sale and I was told that if he didn't ask for validation, it is probably wrong. Program is working well and do not ask for validation.Can you please confirm this or show me how to check registration / activation serial number