Air Print with Canon Selphy CP1200?

Similar Questions

• I want to connect my Canon Selphy CP1200 again to my computer, but the driver installation fails

  I'm trying to connect my new Canon Selphy CP1200 to my computer, but the installation of the driver fails.

  Hi phxiadydi,

  Please try download and install the latest driver for your CP1200 SELPHY available from the Canon web site.  Please use the following link:

  https://www.USA.Canon.com/Internet/portal/us/home/support/details/printers/mobile-compact-printer/se...

  Once the loading of this page, please click on the tab drivers.  The driver of Windows 7 it will be there.

  Please note that Canon Forum is not intended for immediate help, but a place for the community to give you help and comments. If there is a need for emergency assistance, please use the link below to join our friendly technical support team:

  http://www.USA.Canon.com/Cusa/consumer/standard_display/contact_us_consumer

• Air print with my HP 3520 printer?

  I LOOK can print from my iPad or iPhone 6 on my printer HP 3520 thanks.

  Hello

  Yes, it's an AirPrint printer:

  http://support.HP.com/us-en/document/c03274848

  As long as they are on a wireless to the SAME network, you can use AirPrint for printing.

  Kind regards.

• Can't print with my MacBook Air to my HP Desk Jet 3050 after update of El Capitan.

  Can't print with my MacBook Air to my HP Desk Jet 3050 after update of El Capitan.

  Have you run software update? That's what HP recommends that do you. I hope that he will find and install the updated software from there.

  Does your model listed.

  HP v3.1 for OS X printer drivers

• How to enable two-sided printing on MacBook Pro with Canon MX490 printer

  Hello

  I have the MacBook Pro (retina, 13-inch, early 2013) and OS X version 10.11.4 (15E65) and Printer series Canon MX490.

  When I try to make a double-sided, the printer settings printing does not allow me activate two-sided printing.

  

  Also when I go into the settings of the printer, there is no option for me to select this option to enable printing double-sided or duplex printing etc..

  

  When I try to print with TextEdit settings, I still get the same printer settings and it does not allow me to enable two-sided printing.

  I couldn't find answers online, and frankly it's frustrating. I would appreciate if anyone can help with the problem.

  Thank you very much!

  This is the screenshot of the settings under the printer to textedit. Sorry I don't tie with the original message earlier.

  

• El Capitan is compatible with Canon Pixma printer?

  The new Mac OS is compatible with Canon Pixma printer

  It is compatible with my 3 printers Pixma Canon's (MP830, MX922, Pro9000)

• How can I get my Canon i550 printer to print with all colors. Cleaned and aligned and there are a lot of ink, but do not print correctly.

  Print all colors with the exception of cyan, so blue and green print under rose.  I have cleaned the nozzles according to the instructions, there is a lot of ink in each cartridge and it worked a few days ago.

  Hello

  Check with Canon support, their documentation and online drivers. As Canon OEM is responsible for
  for the proper functioning of the printer and drivers provided.

  Canon - Support and drivers
  http://www.USA.Canon.com/Cusa/support/consumer

  Canon - Windows - Vista and Windows 7 support
  http://www.USA.Canon.com/Cusa/consumer/products?pageKeyCode=windowsSupport

  I hope this helps. Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Need a driver for Canon Selphy CP400 with Windows 7

  There is no driver support for my Canon Selphy CP400 constructor.  I am running windows 7.  What can I do to get a driver for it so my printer working again?

  TA

  Yes, there are

  

• Windows 7 Home Premium 64-bit with Canon IP6600D printer and unknown device

  I have a Windows 7 Premium build with a Canon Pixma IP6600D printer.  It worked sporatically at first with my Windows 7 until recently.  Now, I get an unknown device and the USB Plug N Play reports that it is not recognizing the device.  The USB port on the printer is good as it works perfectly on my XP machines and the USB port is on the PC as the other devices are recognized without incident.

  I tried stuff Device Manager usual for updated driver, updates the window, etc.  As this is a printer compatible 64-bit of Windows 7 (with some minor limitations), I was wondering why all drivers for Windows 7 is not recognize this printer.  Printer is good, USB is good, the cable is good.  Of course, the OEM driver disk is more compatible to reload the printer because it is a 32-bit application.  So, I rely on Microsoft Windows 7 drivers Canon for the deal.

  Just got off the phone with Canon and they confirm that the driver of Windows 7 are compatible plug-n-play and all I need and that Canon does not provide one direct driver other than the Add on Windows 7 x 64.

  Yet once, I ran all the windows and the driver updates to say everything is as current as possible.
  Next?

  THX.
  AGE

  Get the 64 bit Vista http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=DownloadDetailTabAct&fcategoryid=357&modelid=11864&default_os=windows_vista driver and install it, then the add-on (if you need it) on the same page, but change the OS to Windows 7 64-bit.

• Editor 2013 incompatibility with Canon MG5520 printer

  I have been using Microsoft Office Professional 2013 on a Dell XPS8700 with Windows 7 Desktop and all-in-one printer of Canon MG5520. Now I get error messages stating "Publisher" is not compatible with the printer. I checked the compatibility of Windows page and the printer IS compatible with Windows 7. I did a "system restore."  I uninstalled and reinstalled the printer.  Need suggestions. Thank you.

  Hello Susan,

  Please keep us updated on the status of the issue.

  As you mentioned that you are faced with this particular problem with Microsoft Publisher 2013, this is why I suggest that you post your question in the forum Microsoft Office to improve assistance in this regard.

  Microsoft Office Forum

  http://answers.Microsoft.com/en-us/Office/Forum/office_2013_release-publish-os_device_win7?tab=threads

  Hope this information is useful.

  Please do not hesitate to answer, in the case where you are facing in the future other problems with Windows.

  Thank you

• With Canon LBP6000 printer problems.

  Purchased a Canon LBP6000.
  Installed, but gives an error of communication.
  The error comes on then off so fast, it is difficult to read.
  It will print but without stop (guard printing).
  Install the driver several times.
  Changed the USB cords without change.

  The printer is attached to an old laptop and
  It worked properly.

  I run Windows 7 Home Premium on a Dell Vostro 260 S
  x 64.

  TIA

  Hi Ernie,.

  Have you installed the latest driver for the printer after have downloaded you from the Canon Website?

  If Yes, then I'll ask allows you to check with Canon support for further assistance on the issue. It could be a corrupt setting related to the printer when it is connected to this computer.

  Check out the link to post the same query in Canon forum:

  http://forums.USA.Canon.com/

  Please let us know if you need any other assistance on Windows. We will be happy to help you.

• Problem with Canon printer and scanner.

  My Canon MP610 printer suddenly stopped scanning, which gives the message "scanner driver supported by this software is not installed." Install and then try again"

  After trying a few things, I finally just uninstalled and reinstalled, using the installation CD and then following the instructions in

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/Canon-MP610-printer-a-newer-version-of-MP-drivers/b5d065bd-e384-4EC3-bffb-85f7aedbb101

  I did it several times now but all without success. The printer prints, but the scanner gives the same error.

  Any ideas? I am running Win 7 Pro 64.

  Hello

  If this isn't a driver problem there is a problem of setting or material and you
  need to contact Canon.

  As Canon OEM is responsible for the proper functioning of the printer/scanner
  and their drivers. Check with Canon support, their documentation online.
  and drivers.

  Good luck, you need to update or reinstall the latest driver.

  Canon - PIXMA MP610 - software and drivers<- select="" your="" version="" of="">
  http://www.USA.Canon.com/Cusa/support/consumer/printers_multifunction/pixma_mp_series/pixma_mp610#DriversAndSoftware

  Canon - Support and drivers
  http://www.USA.Canon.com/Cusa/support/consumer

  Canon - Support - contact us
  http://www.USA.Canon.com/Cusa/consumer/standard_display/contact_us_consumer

  Canon - Windows - Vista and Windows 7 support
  http://www.USA.Canon.com/Cusa/consumer/products?pageKeyCode=windowsSupport

  Canon printer - page local confirmation - could be from another region.
  http://pdisp01.c-WSS.com/OS/

  ====================================================

  The main issue is probably the drivers, but these can help:

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Find the manufacturer's Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Canon SELPHY ES1 Compact Photo Printer - device driver needed

  Need to find the driver for

  Canon Selphy ES1 Compact Photo Printer

  The site of Support of Canon for the SELPHY ES1 has 32 and 64 bit Windows 7 drivers: http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/selphy_compact_photo_series/selphy_es1#DriversAndSoftware

  How do you know if you are running 32 or 64 bit Windows 7: http://windows.microsoft.com/en-US/windows7/find-out-32-or-64-bit

• I can't print with the printer canon pixma comment do?

  Adobe comment print with?

  Hi marie-josed29443125,.

  Do I understand correctly that you try to print from an application Adobe to a Canon Pixma? What application you use, and you are on Mac OS or Windows? Are you able to print to that you print from other applications (not Adobe)?

  In general, as long as you have the printer set up with the right connection and the printer driver, you should be able to print from applications, including those from Adobe.

  I suspect that you may be running in trouble with the printer, so please let us know if you have a specific problem with an Adobe application, and we will try to get it sorted.

  Best,

  Sara

• Unable to communicate with Canon printer Acrobat

  I was scanning and printing with great success with Acrobat 8.1.0 and Canon MX870 until the subject a week ago, then breathless Acrobat scanninjg function. All non acrobat direct print functions of PC have not been affected. Upgrade to Acrobat X 1 in the hope of solving the problem, but it has not done. Acrobat X 1 installed Ok, but I still cannot print or scan using Acrobat X 1.

  Now get very frustrated and disappointed with the product Adobe and after-sales service.

  Any help would be welcome.

  Moved to this discussion in the forum printing & prepress.