Aironet 1142 not broadcasting the SSID

I configured the device manually, not even using quick or Express security configuration then... it's possible that I missed something.

Anyway, here's the problem. Although the SSID is configured as 'AP1', this SSID is not among the networks available on the client computer.

The connection configured in the group policy for the customer, should happen actually automatically, based on the SSID, but because the SSID is not broadcast, connection fails as well.

The Aironet is among the available networks 'Other network' and if I click on "connect" I am asked to enter the SSID-> AP1

Although fashionable, the error message displays (unable to connect to the network, or something to that effect), the laptop * fact * connect once I have close this window. Access to the network is complete and functional - I can ping other hosts, etc...

I would post screenshots, but not knowing what parameter is missing or incorrect, I must print dozens. So here's the sh run out of the AP obtained via telnet (just below). Can someone tell me what is missing? It's a test network so all information is 'real' (nothing has changed for privacy):

Note: I even changed the hostname to "AP1" (it's still LAB1 below) but that has not solved the problem (do not think it would be).

#######################################################################################################

Lab1 #sh run
Building configuration...

Current configuration: 2321 bytes
!
version 12.4
no service button
horodateurs service debug datetime msec
Log service timestamps datetime msec
encryption password service
!
hostname LAB1
!
Pulse 9 logging console
enable secret 5 $1$ $9EWD kxrbg8KxikRFypOieKiZh.
!
AAA new-model
!
!
AAA rad_eap radius server group
Server 10.0.0.12 ACCT-port auth-port 1812 1813
!
AAA rad_mac radius server group
!
AAA rad_acct radius server group
!
AAA rad_admin radius server group
!
AAA server Ganymede group + tac_admin
!
AAA rad_pmip radius server group
!
RADIUS server AAA dummy group
!
AAA authentication login eap_methods group rad_eap
AAA authentication login mac_methods local
AAA authorization exec default local
AAA accounting network acct_methods power group rad_acct
!
AAA - the id of the joint session
!
!
dot11 syslog
!
dot11 ssid AP1
authentication open eap eap_methods
authentication-key wpa version2 management
!
!
!
062506324F41 Cisco 7 password username
!
!
Bridge IRB
!
!
interface Dot11Radio0
no ip address
no ip route cache
!
encryption ciphers aes - ccm mode
!
SSID AP1
!
gain of antenna 0
local power 2
power customer 2
root of station-role
Bridge-Group 1
Bridge-group subscriber-loop-control 1
Bridge-Group 1 block-unknown-source
No source of bridge-Group 1-learning
unicast bridge-Group 1-floods
Bridge-Group 1 covering-disabled people
!
interface Dot11Radio1
no ip address
no ip route cache
Shutdown
gain of antenna 0
DFS block 3 Strip
channel SFR
root of station-role
Bridge-Group 1
Bridge-group subscriber-loop-control 1
Bridge-Group 1 block-unknown-source
No source of bridge-Group 1-learning
unicast bridge-Group 1-floods
Bridge-Group 1 covering-disabled people
!
interface GigabitEthernet0
no ip address
no ip route cache
automatic duplex
automatic speed
No keepalive
Bridge-Group 1
No source of bridge-Group 1-learning
Bridge-Group 1 covering-disabled people
!
interface BVI1
IP 10.0.0.51 255.0.0.0
no ip route cache
!
default IP gateway - 10.0.0.12
IP http server
no ip http secure server
IP http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
radius of the IP source-interface BVI1
format of server RADIUS attribute 32 include-in-access-req hour
RADIUS-server host 10.0.0.12 auth-port 1812 acct-port 1813 borders 7 15135A0E07782F2
12E60
RADIUS vsa server send accounting
1 channel ip bridge
!
!
!
Line con 0
line vty 0 4
!
end

LAB1. #

You must add the command "guest mode" under the terms of the section. (without the quotes of course)

Sent by Cisco Support technique Android app

Tags: Cisco Wireless

Similar Questions

  • New Cisco Aironet 1602i is not broadcasting the SSID I place

    New Cisco Aironet 1602i is not broadcasting the SSID I place

    SSID I set up is not broadcasting, so I don't see the wireless network to choose and connect. On my laptop if I choose specify the name of the SSID then I am able to connect to the wireless network. I have only 1 Configuration SSID on the access point. Anyone know how to update the configuration for the SSID is broadcast?

    The green light on the AP flashes and turns off about 3 seconds; is this normal or should it stays on all the time?

    Current configuration: 1842 bytes

    !

    version 15.2

    no service button

    horodateurs service debug datetime msec

    Log service timestamps datetime msec

    encryption password service

    !

    host ap name

    !

    !

    Pulse 9 logging console

    enable secret 5 $1$ rrlE$ msWqu8CGY/tpDkgRAAAIe /.

    !

    No aaa new-model

    no ip Routing

    no ip cef

    !

    !

    !

    dot11 syslog

    !

    dot11 ssid Mi Casa

    open authentication

    authentication-key wpa version2 management

    WPA - psk ascii 7 142017070F0C787B7579

    !

    !

    Crypto pki token removal timeout default 0

    !

    !

    username Cisco privilege 15 password 7 112A1016141D

    !

    !

    Bridge IRB

    !

    !

    !

    interface Dot11Radio0

    no ip address

    no ip route cache

    !

    encryption algorithms aes - ccm tkip encryption mode

    !

    SSID Mi Casa

    !

    gain of antenna 0

    STBC

    beamform ofdm

    root of station-role

    Bridge-Group 1

    Bridge-group subscriber-loop-control 1

    Bridge-Group 1 covering-disabled people

    Bridge-Group 1 block-unknown-source

    No source of bridge-Group 1-learning

    unicast bridge-Group 1-floods

    !

    interface Dot11Radio1

    no ip address

    no ip route cache

    !

    encryption algorithms aes - ccm tkip encryption mode

    !

    SSID Mi Casa

    !

    gain of antenna 0

    DFS block 3 Strip

    STBC

    beamform ofdm

    channel SFR

    root of station-role

    Bridge-Group 1

    Bridge-group subscriber-loop-control 1

    Bridge-Group 1 covering-disabled people

    Bridge-Group 1 block-unknown-source

    No source of bridge-Group 1-learning

    unicast bridge-Group 1-floods

    !

    interface GigabitEthernet0

    no ip address

    no ip route cache

    automatic duplex

    automatic speed

    Bridge-Group 1

    Bridge-Group 1 covering-disabled people

    No source of bridge-Group 1-learning

    !

    interface BVI1

    IP 192.168.10.200 255.255.255.0

    no ip route cache

    !

    by default-gateway IP 192.168.10.1

    IP forward-Protocol ND

    IP http server

    no ip http secure server

    IP http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag

    !

    1 channel ip bridge

    !

    !

    !

    Line con 0

    line vty 0 4

    local connection

    transport of entry all

    !

    end

    Hi you must guest mode config on the ssid... Read this bud

    https://supportforums.Cisco.com/docs/doc-5442

    Sent by Cisco Support technique iPhone App

  • Get my F4580 to connect to my network that is not broadcasting its SSID

    I am a user of Apple's Mac, I try to connect my Deskjet F4580 to connect to my wireless network.

    I use a Belkin Pre N1 Wireless router, which is configured to not broadcast the SSID is.

    I tried to enter the SSID manually on the Setup for the F4580, but he can't see it.  I don't want to start broadcasting the SSID because of security concerns.

    How do both speaking to another.

    Thanks in advance

    Arbroathsmokie

    Broadcast your SSID.  Not to broadcast is not a security measure.  Not at all.  It is free on the internet that can read your SSID that you stream or not.  Read more here.

    Use WPA or WPA2 (not WEP, which can also be broken with freeware) encryption with a password strong and enjoy more security and less hassle you have now.

  • Broadcast the ssid on WLC for multiple ssid

    Hello

    I'm looking to broadcast the ssid as 13 on the controller, but another 2 not broadcasting. can we do this? It will be totally 15 SSID, provision of services to clients over several suppliers.

    Thanks in advance

    Hello

    By default, the Cisco access point supports 16 SSID... If you want 15 SSID in werving network customers then its possible at the level of the problems... If the SSID is not broadcast, check if customers correctly enter the credentials and create a manual profile on the laptop or something... it will work.

    Let me know if that answers your question...

    Concerning
    Surendra
    ====
    Please do not forget to note positions that answered your question and mark as answer or was useful

  • HP Photosmart Prem 310a went offline suddenly and will not identify the SSID to run the Network Setup Wizard.

    All of a sudden the printer has gone offline a few days ago.  Went through all the diagnostics, etc. but nothing fixed.  A solution-Assistant will not work cause it will not identify the SSID of the network that he has done since it was installed (long ago).  Have tried everything I can find online, unless I don't understand or is not quite apply and still nothing.  Wireless network works with everything except the printer. I am not very computer so I do not understand most of the letter & numbers abbreviations used here.  Help.

    It may be a heat problem - radio from the printer gets flakey when it's hot.

    Finding 5 wireless networks should - Yes you have one, but your neighbors also have.

  • Broadcast the SSID off

    Safety precaution I have disabled SSID.

    all of my users that is connected, lose their wifi.

    Because their device is configured to automatically search for the 1900ac router and connect, and why can't they sign?

    Since you have hidden the SSID name, you will need to manually enter the name of the SSID on devices out there it having to connect.

    FYI, hiding the SSID can see that a good not, however in most cases with scanner users still find hidden SSID names. It's an effect placebo for users.

  • 2540 HP printer all in one: Blue Hp flashing wireless. Do not accept the SSID password

    I have a HP 2540 wireless with a blue light problem flashing. The error message is 'do not accept password' somethhing or similar to that. I restarted the router, printer and pc according to the instructions. I reloaded the latest drivers from the Hp I homepage I pressed the buttons wireless and cancel them for 5 seconds. None of this works. The printer will not connect to my home network or directly to my pc. I have windows 7 pro 32 bit and Att Uverse network using WPA - AES. I type the correct SSID password, but it does not accept the installation program. He logged the first right on the day with all the features of operation area. I think I need to reset to the factory as I've made a few changes setting to print from IE Explorer and Google Chrome.  From one day to the next day something changed after the next power Cycle.

    Connect to your router and remove all security on your SSID temporarily. Now try to connect to your SSID unsecured. Are you successful? If so, go back and add WPA2-AES with your password and try again.

  • Do not remember the WPA key. Other computers on the network

    I don't remember my WPA key and reset isn't exactly an option since I have other computers already configured for the existing key. I don't mind reset other computers as well if I knew for sure that it works. However, there is a discrepancy between the length of the WPA key on my Linksys (indicated as asterisks-33) and the length of the WPA key shown on the laptop of my wife (indicated as asterisks-63).

    I am trying to add a Wii to my network. Our router is currently not broadcasting the SSID, but I typed the name of the router in the Wii in any case. (She even will be able to find a network that is not broadcasting its SSID?).

    I also added the Wii MAC address to the list of trusted computers.

    Regarding the password, I considered to change but I'm worried I might spoil my wife configuration.

    When I go into my wireless settings, I see that I use a WPA TKIP encryption which is 33 characters long. However, when I go into the configuration of the network on my wife's computer, she says that his encryption key is 63 characters (WPA - PSK TKIP). Why the keys of different length?

    Is it possible to change the encryption key on the router to something I'd remember? If so, that will enter my wife's computer? Wouldn't make sense that what I typed in the settings wireless of Linksys (33 characters) would be the same as mine rather than 63 characters?

    I'm so confused.

    Any help?

    First, the County of asterisk is meaningless.  Even the number of characters in your password is a secret, so all good programmer who wrote your wireless network card driver shouldn't have a number of astrerisk which corresponds to your password.

    Set your "broadcast SSID" "enabled."  Do you really think someone will lose hundreds (or thousands) of hours of time to break your password, just enter a router WPA?  As long as you use WPA or WPA2 and a password, you shouldn't worry about your SSID broadcast.

    You can use any key (sometimes called password or password) you want, but all the keys (in router and all computers) will be the same.  Ideally you should use a strong password.

    Choose passwords (keys): you should never use a Word from the dictionary as a password. If you use a Word from the dictionary as a password, or WPA2 can be cracked in a few minutes. When you take your login password and key encryption (password or password), you must use a random combination of uppercase letters, lowercase letters and numbers letters, but no spaces. A connection password, must be 12 characters or more. WPA and WPA2 passwords must be less than 24 characters. Note: Your key, password or password should not be a space in it.

    Most individuals should have their routers defined so that "remote management" of the router is disabled. If you must have this option enabled, then your password needs to be increased to a minimum of 24 random characters.

    An additional problem is that Windows XP requires SP3 run WPA2 (WPA with AES =).

  • trying to connect to the PS3 online, my router is microsoft but the SSID is not displayed? Help, please

    Trying to connect to the PS3 online, my router is microsoft but the SSID (or our wireless network name) is not displayed!  Help, please!

    Jamie

    Hello

    1. What is the brand and model of Microsoft Router?

    If you use Microsoft MN - 700 router see link below and follow the steps.

    MN-700 Base Station Configuration Guide

    Download the guide and open page 3 that contains instructions for recording in the router. Page 16 has also the steps to configure the router to broadcast the SSID

    If in case you use a Microsoft MN - 700 router, I suggest you to provide exact model name to get more information about the issue.

    I hope this helps.

  • LWAPP access point not to advertise the SSID

    I have a 4402 WLC and LWAPP AIR-LAP1131AG-E-K9 connected to it.

    I've been struggling with the config for some time now.

    I have a laptop next to who will not see the SSID I configured it broadcast.

    I have no idea why, but I got the following errors in the log.

    APR 17 11:37:59.091 sim.c:913 SIM-3-GW_MISMATCH: MAC address of the 00:0f:f7:32:c1:80 GW received the JOIN query is different from the MAC addr 00:00 caching: 0C: 07:ac:64 of the Gw. removal of the address IP of Gw 10.45.50.97 for AP Mgr. & send ARP REQ. for resolv

    APR 17 11:37:49.080 spam_lrad.c:1107 LWAPP-3-DISC_INTF_ERR2: ignoring the discovery request received on one VLAN badly (70) on the interface mode LWAPP-L3 (1)

    I notice that the first error property intellectual GW-related, but I don't know if this is specified, and why it is inconsistent.

    I don't know what the second error means either on the VLAN evil.

    Please can someone help!

    Thank you very much

    Neil

    I saw this in HP laptops some time there and his call "LAN Switching".  By default, it is disabled on BIOS.

  • hp7520 disable wireless or hide the SSID

    Hello.

    I have a HP Photosmart 7520.

    It works fine except my client does not want the ssid broadcast in the doctor's office.

    It is already password protected, but he dislikes the ssid 'disorder' in the air.

    I would like to disable Wi - Fi to the printer or at least hide the ssid broadcast.

    Is this possible?

    Thank you.

    Go to the printer and turn off wireless Direct.  Quite.  This assuming the printer is connected to the router.

  • The SSID on Cisco WLC support no.

    Hi all

    Can you please help me to provide details on the following Cisco wireless controller?

    1. no support SSID on Cisco WLC

    2. is it possible to limit the SSID on the access point (for example, I have 10 SSID configured on the controller, I want 10 first access points using SSID (SSID 1-5) and rest of the AP SSID 6-10)

    Thank you

    Jamal

    Hi Jamal,.

    Just to add to the great info of Robert (+ 5 points Robert)

    The feature you're looking for is called WLAN substitute in versions 4.x WLC.

    Allowing substitution WLAN

    By default, all defined WLAN transmission on the controller access points. However, you can use WLAN editable to select WLAN is transmitted and who are not on a per access point basis. For example, you can use WLAN to control override goes where in the guest WLAN network or you can use it to disable a specific WLAN in a certain area of the network.

    This doc.

    http://www.Cisco.com/en/us/docs/wireless/controller/4.0/Configuration/Guide/c40wlan.html#wp1114777

    Once you create a new WLAN, WLAN > page edition for the new WLAN. In this page, you can set various parameters specific to this general policy, RADIUS servers, political security WLAN key, and 802.1 x settings.

    * Check Admin status under general strategies to activate the WLAN. If you want AP broadcast the SSID in beacon frames, check the SSID broadcast.

    Note: You can configure up to 16 WLAN on the controller. The Cisco WLAN Solution can control up to sixteen WLAN for Lightweight APs. Each WLAN has an ID separated from WLAN (1 to 16), a WLAN SSID (name of the WLAN) separate and can be assigned to single security policies. Lightweight APs broadcast all Cisco WIFI WLAN SSID Solution assets and apply the policies that you set for each WLAN.

    The good doc.

    http://www.Cisco.com/en/us/Tech/tk722/tk809/technologies_configuration_example09186a0080665d18.shtml#C3

    In versions 5.x, you will use AP groups, because in versions 5.x WLC, WLAN substitute has been replaced by the "Groups of AP" feature;

    Creation of groups access Point

    After all the access points have joined the controller, you can create up to 150 groups of access point and assign up to 16 local wireless networks in each group. Each access point announces that the WLAN enabled that belong to his group of access point. The access point no announcement not disabled WLAN in its access point group or WLAN that belong to another group.

    http://www.Cisco.com/en/us/docs/wireless/controller/5.2/configuration/guide/c52wlan.html#wp1128591

    To learn more about George video AP discover excellent groups

    http://www.my80211.com/Cisco-Labs/2009/3/22/Cisco-AP-group-nugget.html

    I hope this helps!

    Rob

  • Pavilion dv6: Notebook does not receive the signal of 5 GHz

    Hi, recently I bought a new modem router with the capacity of 5 GHz. After the establishment of the net, my laptop does not have the SSID. Other devices receive the SSID and connect to. How can I check, discover and recognize the net working at 5 GHz

    Hello:

    Most likely your laptop is only a single wireless card band (2.4 GHz) (model ending in bgn suffix).

    Virtually no consumer class computer laptop HP made at the time came with a wireless card dual band (model ending in abgn or agn suffix).

    Even those made today... most of them still have cards of single band.

  • WiFi does not connect if the SSID is not broadcast.

    I've updated to Sierra this afternoon. Everything seemed fine after the update. After dinner, my MacBook Pro (retina, 15 inches, beginning 2013) would not connect to Wifi. I reduced to a few things.

    It wouldn't connect the 5 GHz n If the SSID has been hidden. If I admitted the SSID to shown, it would connect without problems. It would connect to the 2 GHz band, even with the hidden SSID.

    I did the typical SMC reset and reset the NVRAM. I deleted the files related wifi and restarted the router and the MBP. I'm obviously on now and the speed seems normal with no dropouts. I can't hide the SSID now and will continue to work until he's asleep; No dice after that without reactivation SSID broadcast.

    Any thoughts?

    See you soon,.

    Fred

    With your same Apple ID, you can register for a free developer account and start a conversation with Apple engineers. They will answer your question: Bug Reporter https://bugreport.apple.com/

  • WiFi does not work if the SSID is not broadcast by router

    I have a new 55HX929 and tried to connect to my wifi with its built-in wireless adapter. I do not broadcast my network SSID the router for security and privacy. The searched TV network, does not, and then it asks to enter the SSID. Then, it saves the information and trying to connect but fails. If I enable SSID broadcast on the router and then the tv connects fine but I don't have to do. My tivo with its usb wireless adapter works fine with the SSID broadcasts do not when I configure the network settings. On the same stand as the TV with the power of the signal fine. I am currently using a wireless connected to the ethernet jack TV bridge to work around the problem, but it's a waste when the tv should work with a standard network configuration.

    Reading sortiesdvd.com, people have the same problem with NX720 and Sony Google Internet tv. So it seems to be a common problem with Sony games.

    I tried online support chat, and they were not able to help. Everything they told me to do was reset the router and tv which does not help. I don't think they understood that a SSID came from how they responded to my questions.

    Can we get a fix for this?

    Thank you for your messages. We have forwarded your comments to Sony engineering for future updates.

Maybe you are looking for