AirPlay - aTV video, sound effects for AExpress: does not work with large files

Hello!

My setup

  • Internett--> modem (Cisco?) --> a/c Airport Extreme (latest high version)
  • iMac, iPad, 2 x iPhones. iMac installed Beamer.
  • Bedroom: AppleTV 3rd GEN rev A - hdmi--> LG TV (old). AirPlay ON, 'Apple TV room '. Connected to the local network of 5 GHz.
  • Bedroom: AirportExpress 1st GEN 802.11 a/b/g N-Draft (last type of those that go right into the socket) with AirPlay - stereo--> stereo BOSE. AirPlay ON, 'room '. Connected to the local network of 5 GHz I also tried to connect 2.4 GHz network, no significant variation...
  • Living room: AppleTV 4th Gen. - hdmi--> LG TV (new). AirPlay ON, "iTV."

Problem (abridged version)

Most of the time - but not every time - when I stream video + audio iMac to aTV and choose to listen to the audio portion of the aTV to a separate AExpress (which is connected to a better BOSE audio system), the movie will not play. Streaming both audio and video - and only - the aTV works perfectly, but then I have bad sound, since I use the TV's internal speakers. What is reasons for it? Tips to fix it?

Problem (full version)

Every time when I stream video and audio from large multimedia files (about 3-4 GB .mkv) of the iMac (Beamer) on the ATV to the room, I didn't encounter any problem. Buffering is fast (2-4) and there is no delay or other negative experience. Unfortunately, as with all flat TVs, the sound of the TV is poor. Since I have a BOSE sound system, placed around this TV, I like to use it for audio. As I do this is - after the streaming media file (Beamer) iMac to the bedroom aTV - pressing the Center "Select" button during 1 sec on the remote to display the "audio" preferences and select money "Chamber" (AExpress related to the BOSE sound system). In this way, I think that audio + video is streamed to the iMac on the ATV in the bedroom, and the sound is then broadcast the ATV to the AExpress. This is where the problem occurs. Sometimes it works very well, as today in the morning. No lag and everything works fine. But most of the time, after changing the preference "audio" in the sound stream for the BOSE, the beginning of the play symbol buffering becomes the symbol of the break and nothing happens. I hit play again and the symbol of the game / buffering symbol lights up for a few seconds, and then again to pause. She never starts.

The problem usually occurs with heavy multimedia files / large size 1080 p and 3-4 GB, not with the simplest 720 p files weighing about 1 to 2 GB. This makes me think it's a matter of WiFi capability. But if my WiFi network should not be able to manage that? I think that the apple TV in the bedroom and the AExpress uses the N standard, so it is the limiting factor. But if this interface should not be able to handle the traffic? Is it true that do what I do - separate the video and audio - use twice the network traffic?

I also want to mention that everything works perfectly at certain times, like this morning. Last night (12 h) it wouldn't work at all... Perhaps there are more traffic yesterday (Saturday) evening.

Questions (summarizes all Qs in text and some new)

  1. My network be able to handle the traffic encountered at the stream video + audio iMac to mountain BIKING in the room and streaming audio of ATV to AExpress at the same time?
  2. It is true that this configuration requires / use twice the network resources?
  3. Do you also think that my problem is caused by a network limited issue / the amount of data PR. second?
  4. I have a new (flat unit with power cord separate) Airport Express. This device manage more traffic and thus possibly resolve my problem?
  5. Other suggestions to solve my problem?

Sorry for long post, but I think that its better with much info little. Have a great Sunday =)

I think I can explain the reason for the problem... but I have little experience with sound problems... so you will need to figure out a work around.

The nature of wireless networks, it's to manage the stream very well... but they are much less good at the sensitive time of things like multimedia transmission continuously. In fact, if you want to stream multimedia content over wireless, it is preferable to use specialized units... no wifi. I have a 3D projector and home theater system that uses a special wireless link from Epson to the projector... It is amazing that it can handle the required data of 3D projection. It does so by using 60GHz or some these extremely high FREQ... and totally dedicated units... no wifi. In the end, we ran an HDMI cable in the wall... it was largest wireless but not could be started reliably. Wireless is simply not ready for the big time of streaming video high definition even when dedicated.

Wireless network adapter... It is wifi, can handle only one connection at a time and it time slices between clients. It's also half-duplex, so it can only send or receive... it can't do both at the same time.

On the other hand, modern interrrupteurs ethernet can stream to multiple devices at the same time. It can also handle send them and receive at the same time... That is to say in full duplex. This is why the networks ethernet much more suitable for media streaming wireless never can be.

As soon as you try to use double flow... even if it is audio (low bandwidth) and a video (broadband), you will cause huge delays to the video component. The video stream has literally if stop to give the time to the audio to catch up... you can immediately see where this will lead. Low resolution, it might work... but at high resolution, there is bandwidth inadequate considering the Division of time.

It would be much better to use the audio on the TV. Or check if the TV itself has audio output... that plug into the standard analog audio system RCA or it could even have out optical. Who will then provide a means by which the flow must not be split. My samsung smart TV offers you both.

The other solution probably won't be viable... execution of ethernet.

Tags: Wireless

Similar Questions

  • No-a-Ref does not work with audio files?

    I use LabVIEW 2013 32 bit under W7 - 64.  When I open an audio file and you write for, for example ref is valid, Not-a-Refnum? function returns True.  Is this a limit known audio file?  The same is true with the example program OR 'His file to the Output.vi' when an audio file is opened in read mode.  The works of VI, but the Not-a-Refnum? is set to True.

    DaveT

    This is a known limitation. The screws of Sound do not use a real LabVIEW refnum, they take advantage of just the type of file refnum to conceal their own internel reference as a LabVIEW refnum That has the advantage that you can wire not accidentally other refnum or integer to these screws, but that it is not working with the primitive IsNotA Refnum(). The node RefnumToPath in any case never could work, even if these screws used a real refnum of LabVIEW, given refnum would be a refnum of Sound specific resource, not a file (normal file or datalog) Refnum, which is type single refnum where the Refnum of the function of the path runs on for pretty obvious reasons, like other resources in LabVIEW are not a valid path.

  • Sound effects for Windows does not not after installing Skype

    Windows Messenger has informed me that it will soon no longer running, and that I had to switch to Skype.  I previously did not have Skype on my computer, so I followed the instructions for the installation of messenger-hotmail-Skype.  I had no problems with the Setup, and Skype works fine.  But now my computer sounds (as windows starts, shut down, etc.) do not work.  I went to the control panel and tried to switch to a different style to reset, tried test the individual sounds, but none of them work.  The option to test the sound of each effect works, I can click on the button, but no sound.

    Thank you

    Hello

    Thanks for posting in the Microsoft community

    From your problem description, I understand that you are facing problems with sound after you install Skype. Please let me know if you do not experience this problem.

    I suggest you try the following steps.
    Method 1: Open the troubleshooting of Audio playback
    http://Windows.Microsoft.com/en-in/Windows7/open-the-playing-audio-Troubleshooter

    Method 2: Tips for solving common audio problems
    http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

    Also refer to link:
    https://support.skype.com/en/faq/FA12208/what-happens-when-i-update-from-windows-messenger-to-skype

    Hope this information is helpful and let us know if you need help with Windows in the future. We will be happy to help.

  • Control of the Xbox 360 Wireless for Windows does not work with COD WAW

    Hello, I use the X box for windows pc controller. I have Windows Vista 64 bit installed, and I am trying to play Call of Duty World at War; However in the gameplay, the game does not respond to any controller input. Where this happens, it is indeed the controller wireless for windows with the wireless adapter and yes I checked for the last update and I.
    O.S Windows Vista, 8 GB of Ram, Intel Cor 2 extreme quad, HP laptop

    Hello dtorres17.

    Unfortunately, Call of Duty World at War doesn't support any input other than a mouse and a keyboard controller. Paul Smith - MVP for Windows desktop experience... I crawled off NNTP - for now. Detachment Aldershot, United Kingdom. On the internet at windowsresource.net and dasmirnov.net. Please post back to let us know what works and what does not. :-)

  • Movie Maker does not work with MP4V files?

    When I work with purchased the DVD, the error message that it does not recognize the MP4V of Movie Maker files. What can I do?

    Hello
     

    Thanks for posting in Microsoft Community!
     

    If I understand correctly you want to know if MP4V files are supported by Windows Movie Maker in Windows XP.

    I'm sorry to say but Mp4V files are not supported by Windows Movie Maker in Windows XP.

    To learn more about the supported files, please see the following link:

    Formats supported by Windows Movie Maker in Windows XP file
    http://support.Microsoft.com/kb/308464

    I have also provided a section below it may be useful for future reference:
    Hope the information is helpful and let us know if you need assistance on Windows.
  • Windows Explorer preview pane does not work with .docx files

    I use Windows 7 ultimate (64 bit). The preview in Windows Explorer pane does not display .docx files. How should I do?

    I ran a "repair" of Microsoft Office using the control panel "programs and features". Apparently, which did the trick. Thank you all for your help.

  • Windows Live Mesh for Mac does not work with Mac OS 10.7 Lion

    Maybe someone could help me with this.

    • I migrated to a disk hard again and update of Snow Leopard Lion this week
    • Live Mesh has stopped working so I downloaded the most recent distribution of MS: 15.4.5726.23, 20/07/2011 release date, which says it's for Mac, including the last OS 10.7 Lion as well.
    • It loads, wait, does nothing (the choice of unique to Quit or help menu, and then it ends after about 30 seconds, the LiveAgent not appearing.)
    • I made sure the application has access through the firewall Mac and use the stealth mode.  With stealth enabled, there are messages from the console: Live Agent is listening to 0.0.0.0:59142 proto = 6 AND Live Agent is listening to: ffff:0.0.0.0:59142 proto = 6 AND the first msg repeats.    I also disabled the firewall to test without effect if LiveAgent fails to load. Firewall of variants: with the firewall on, LiveAgent just sits with console messages above until the user clicks on the icon status agent and it then goes to the waiting interminable spinner; with the firewall off, it goes to spinner in less than 15 seconds spontaneously with the GSM, but two sets of their pop up.
    • I repeated a deinstall [app and files] / refresh-download/install process three times and got the same results.
    • In the Finder, and LaunchPad, the icon is displayed normally.
    • I reinstalled the previous version [15.4.5722.2] and the LiveAgent charges, but never decided and just hangs.
    • After doing this and made a fourth installation 15.4.5726.23, 20/07/2011, it now loads the agent but is still suspended as the previous version.
    • If after that, I have now the LiveAgent treat during initialization, but never finished.  It remains active for approximately 8 MB of RAM, but no cycles CPU are used
    • My sync folders are orphans of their source computer, although they always synchronize with my Win7 laptop.
    • I dug a little deeper trying to solve this problem.  I get the following error message if I dig in the 15.4.5726.23 app and run the executable manually:

    aarc01: ~ $ Applications/richard/Windows\ Live\ Mesh.app/Contents/MacOS/Windows\ Live\ mesh; "exit";

    Exception thrown:

    System.IO.FileLoadException: Error 0x1A88.  Debugging resource strings are not available. See http://go.microsoft.com/fwlink/?linkid=106663&Version=3.0.50908.0&File=mscorrc.dll&Key=0x1A88

    [IO. FileName_Name]

    Arguments: Microsoft.LiveFX.ResourceModel, Version = 15.4.0.0, Culture = neutral, PublicKeyToken = 7cec85d7bea7798e

    Debugging resource strings are not available. Often the key and arguments provide enough information to diagnose the problem. See http://go.microsoft.com/fwlink/?linkid=106663&Version=3.0.50908.0&File=mscorlib.dll&Key=IO.FileName_Name

    at Microsoft.MeshOperatingEnvironment.Runtime.Client.MoeRuntime.Start)

    at Microsoft.MeshOperatingEnvironment.Runtime.Client.ILFilter.ExceptionFilter.TryFilterCatchFinally (FilterDelegate filterDelegate, CatchDelegate catchDelegate, TryDelegate tryDelegate, FinallyDelegate finallyDelegate)

    I've seen this behaviour before with v.15.4.5722.2, about 4-5 months ago, but I do not remember what was the solution that solved.

    Can anyone out there advise me?

    THX in advance,

    RC

    Hello RichardCampbellVancouver,

    There is a dedicated forum dealing with problems Windows LIve Mesh. They will be better able to answer your question in the forum.

    Please transfer your question in the Windows Live Mesh Forums on the link below.
    Click on the yellow - ask a Question.

    http://windowslivehelp.com/product.aspx?ProductID=24&version=15.3.2804.0607

    Sincerely,

    Marilyn

  • Sony Vegas Pro 9 does not work with QuickTime or MP4 files

    My Sony Vegas Pro 9 does not work with MP4 files or all the Quicktime files. I know this doesn't have much to do with Windows XP but I just thought I would ask, if you need any information I would be happy to give you.

    Take a look at what it fixed my problem with Vegas platinum 9.0.
    http://www.custcenter.com/cgi-bin/sonypictures.cfg/php/enduser/std_adp.php?p_faqid=4787&p_created=1254146741&p_sid=q91HHDok&p_accessibility=0&p_redirect=&p_lva=&p_sp=cF9zcmNoPTEmcF9zb3J0X2J5PSZwX2dyaWRzb3J0PSZwX3Jvd19jbnQ9NCw0JnBfcHJvZHM9MTcmcF9jYXRzPSZwX3B2PTEuMTcmcF9jdj0mcF9wYWdlPTEmcF9zZWFyY2hfdGV4dD1tcDQgcXVpY2t0aW1l&p_li=&p_topview=1
    This is a link to the FAQ from Sony

  • Why pes 2012 does not work with me and my video card is 1699 MB Intel HD Graphics(core i3)?

    Why pes 2012 does not work with me and my video card is 1699 MB Intel HD Graphics(core i3)?

    Hello

    You receive an error message?

    Method 1:

    You can update the drivers of graphics cards and check.
    Updated a hardware driver that is not working properly
    http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly


    Method 2:

    You can also perform a clean boot and check if it works:
    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
    http://support.Microsoft.com/kb/929135
    Note: after a repair, be sure to set the computer to start as usual as mentioned in step 7 in the Knowledge Base article

    You can also check out the link:
    The problems of the game performance
    http://Windows.Microsoft.com/en-us/Windows7/fixing-game-performance-problems
    Diagnose problems running DirectX
    http://Windows.Microsoft.com/en-us/Windows7/diagnosing-basic-problems-with-DirectX

  • New iPhone IS does not work with MAC Mini 10.6.8. Apple support says upgrade your iTunes. Its the wrong color icon. WHAT? iTunes is the last 11.4 for my mac. All my music is on my Mac. Help!

    New iPhone IS does not work with MAC Mini 10.6.8. Apple support says upgrade your iTunes. Its the wrong color icon. WHAT? iTunes is the last 11.4 for my mac. All my music is on my Mac. Help!

    That is right. The requires iTunes 12.3.3 and in order to get it, you will need to update OS X to El Capitan. That's how Apple has created for better or worse, I'm sorry.

  • Firefox 10 for Mac - 11 installation does not work with Cooliris I have to install Firefox 10

    Firefox 10 for Mac - 11 installation does not work with Cooliris I have to install Firefox 10

    Double post please see also /questions/925441 #answer - 326583

  • Get "key to upgrade is for the edition of windows that does not work with Windows Anytime Upgrade"

    The PC is running Windows 7 Starter.  I'm trying to upgrade to Windows 7 Professional. I bought the card from Windows Anytime Upgrade Key.

    When I entered the PK, error, "put key in level is for the edition of windows that does not work with Windows Anytime Upgrade"

    Windows 7 Anytime Upgrade fails:

    If your getting the following: error: Windows Anytime Upgrade failed
    This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
    See: http://support.microsoft.com/kb/2660811

    = Other reasons and possible corrections.

    Windows Anytime Upgrade fails with the error:
    "every time that the upgrade has failed. Go online to solve the problem.
    http://support.Microsoft.com/kb/2658652

    If Anytime Upgrade still does not work:

    Shut down and restart your computer.

    Make sure that the Windows updates have been installed.

    Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821

    If Anytime Upgrade still does not work, turn off the user account control:

    1. go in user accounts in Control Panel

    2 change user account control settings

    3. pull the slider to the level as low as possible

    4. restart the PC

    5. pass by the "Anytime Upgrade" as usual

    Try the following:

    1 disable any security software before attempting to upgrade

    2. make sure that your computer is updated (devices and applications)

    3. disconnect all external devices before installing.

    4. check your hard disk for errors:

    Click Start

    Type: CMD, according to the results, right-click CMD

    Click on "Run as Administrator"

    At the command prompt, type: chkdsk /f /r

    When you restart your system, your computer will be scanned for errors and will try to correct them.

    1. click on start, type msconfig in the search box and press ENTER.

    User account control permission

    If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

    2. in the general tab, click Selective startup.

    3. under Selective startup, clear the check box load startup items.

    4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

    5. click on OK.

    6. When you are prompted, click on restart.

    7. after the computer starts, check if the problem is resolved.

    Also run the Windows 7 Upgrade Advisor:

    http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

    Who should I contact if I have problems installing and / or activation of my product key card?

    Please contact to the: www.windows7.com/getkeysupport.

    If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

    Learn how to install Windows 7 Service Pack 1 (SP1)
    http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

    If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
     
    HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

    Additional resources:

    http://answers.Microsoft.com/en-us/Windows/wiki/Windows_7-windows_install/how-to-successfully-do-and-troubleshoot-Windows/47e1943f-8255-452A-a7ad-2ae14dc974af

  • "Windows 7 Home Premium SP1 64-bit, an error message indicates" the upgrade key you have entered is for an edition of windows that does not work with Windows Anytime Upgrade.

    Tried using Windows Anytime Upgrade. Bought at Staples have product key is entered correctly. "Following instructions, accepted USA get error message says ' the upgrade key you have entered is for an edition of windows that does not work with Windows Anytime Upgrade. Enter a different upgrade key. »

    Which edition of Windows 7 is installed on the machine?

    Which edition of Windows 7 you are trying to do an Express upgrade to?

    Please note that the Express upgrade does not support OEM, MSDN-Academic, Volume (the student faculty licenses) license. If you are in possession of all these brackets, you will need to save and do a custom clean install. If you want to do it, please backup your Windows 7 Home Premium or according to edition currently installed. Some licenses for Windows distributed to tertiary level students are not perpetual, which means that you cannot continue to use the software after a course or graduating.

    ---------------------

    Windows 7 Anytime Upgrade fails:

    If your getting the following: error: Windows Anytime Upgrade failed
    This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
    See: http://support.microsoft.com/kb/2660811

    = Other reasons and possible corrections.

    Windows Anytime Upgrade fails with the error:
    "every time that the upgrade has failed. Go online to solve the problem.
    http://support.Microsoft.com/kb/2658652

    If Anytime Upgrade still does not work:

    Shut down and restart your computer.

    Make sure that the Windows updates have been installed.

    Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821

    If Anytime Upgrade still does not work, turn off the user account control:

    1. go in user accounts in Control Panel

    2 change user account control settings

    3. pull the slider to the level as low as possible

    4. restart the PC

    5. pass by the "Anytime Upgrade" as usual

    Try the following:

    1 disable any security software before attempting to upgrade

    2. make sure that your computer is updated (devices and applications)

    3. disconnect all external devices before installing.

    4. check your hard disk for errors:

    Click Start

    Type: CMD, according to the results, right-click CMD

    Click on "Run as Administrator"

    At the command prompt, type: chkdsk /f /r

    When you restart your system, your computer will be scanned for errors and will try to correct them.

    1. click on start, type msconfig in the search box and press ENTER.

    User account control permission

    If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

    2. in the general tab, click Selective startup.

    3. under Selective startup, clear the check box load startup items.

    4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

    5. click on OK.

    6. When you are prompted, click on restart.

    7. after the computer starts, check if the problem is resolved.

    Also run the Windows 7 Upgrade Advisor:

    http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

    Who should I contact if I have problems installing and / or activation of my product key card?

    Please contact to the: www.windows7.com/getkeysupport.

    If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

    Learn how to install Windows 7 Service Pack 1 (SP1)
    http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

    If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
     
    HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

  • Error, "the upgrade key you have entered is for an edition of Windows that does not work with Windows Anytime Upgrade." Enter a different upgrade key. "When you try to upgrade to Windows 7 Ultimate

    I have Windows 7 Home Premium and bought a Windows Anytime Upgrade to Windows 7 Ultimate. After extraction in the online store, I got a download link and product key.

    However, when I try to run the Express upgrade and enter the key that I got from the online store, the operation fails and the window says:
    "The upgrade key that you entered is for an edition of Windows that does not work with Windows Anytime Upgrade. Enter a different upgrade key. »

    What should I do?

    Windows 7 Anytime Upgrade fails:

    If your getting the following: error: Windows Anytime Upgrade failed
    This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
    See: http://support.microsoft.com/kb/2660811

    = Other reasons and possible corrections.

    Windows Anytime Upgrade fails with the error:
    "every time that the upgrade has failed. Go online to solve the problem.
    http://support.Microsoft.com/kb/2658652

    If Anytime Upgrade still does not work:

    Shut down and restart your computer.

    Make sure that the Windows updates have been installed.

    Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821

    If Anytime Upgrade still does not work, turn off the user account control:

    1. go in user accounts in Control Panel

    2 change user account control settings

    3. pull the slider to the level as low as possible

    4. restart the PC

    5. pass by the "Anytime Upgrade" as usual

    Try the following:

    1 disable any security software before attempting to upgrade

    2. make sure that your computer is updated (devices and applications)

    3. disconnect all external devices before installing.

    4. check your hard disk for errors:

    Click Start

    Type: CMD, according to the results, right-click CMD

    Click on "Run as Administrator"

    At the command prompt, type: chkdsk /f /r

    When you restart your system, your computer will be scanned for errors and will try to correct them.

    1. click on start, type msconfig in the search box and press ENTER.

    User account control permission

    If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

    2. in the general tab, click Selective startup.

    3. under Selective startup, clear the check box load startup items.

    4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

    5. click on OK.

    6. When you are prompted, click on restart.

    7. after the computer starts, check if the problem is resolved.

    Also run the Windows 7 Upgrade Advisor:

    http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

    Who should I contact if I have problems installing and / or activation of my product key card?

    Please contact to the: www.windows7.com/getkeysupport.

    If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

    Learn how to install Windows 7 Service Pack 1 (SP1)
    http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

    If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
     
    HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

  • 4clipika for satluj police (Punjabi) does not work with windows 8

    R/Sir

    4clipika software for satluj police (Punjabi) does not work with windows 8, but it works with 7 and windows xp. Please solve this problem.

    BSwakaf

    I suggest you cont developer patches or updates.  It is for the developer to make it work with win 8-not the other way around.

Maybe you are looking for