Airport express at slow speed of the modem Arris SB6190

Hello!

My so-called WIFi Comcast gives me 150Mbps. My test only show 70 or slower speed on a WiFi test. After the call to them they told me to talk to my modems customer service. But their customer service is terrible. Here is my setup and yes everything has been switched off voltage and reset. And Comcast has been created with the modem while the Comcast guy was here. From the start after a few hard reset the express worked. Here's the question and the installation program.

I have a SB6190 (not wireless), Arris directly connected to my Airport express. The express (which deals with my wireless connection) is connected to a switch (for wired devices). But I think that my problem is the Express. ? Not sure, I guess my question is I do something wrong in public services from the airport with the Express settings? I do not see why I get more 75Mbps wireless. Or maybe Apple if your reading, you can give it a fix on your next update. Hope you can help and thanks!

Here some thoughts:

(1) the Airport Express uses 100 ports Ethernet of Mbit/s, so the theoretical maximum speed that could be achieved with an Ethernet or Wi - Fi through the Express would be 100 Mbit / s.

(2) the Express is not known for his speed wireless. On a connection of 100 Mbps Internet here, I see usually 45 - 50 Mbps at best more wireless, no matter if the 2.4 GHz or 5 GHz is used.  Ethernet checks better about 75-80 MB/s to the Express LAN port.

(3) these are user to user support forums, so it is very unlikely that anyone from Apple will ever see your post. If you want to provide feedback to Apple, you can do so here: Apple Apple - AirPort Express - Feedback will acknowledge receipt of your message, but they will not respond after that.

(4) the AirPort Express was introduced almost 4 years ago and it's been 2 years that Apple has provided an update firmware for the product, so additional updates are not probably... my opinion.

Tags: Wireless

Similar Questions

  • Interruption of the WiFi connection.  Green light is the Airport Express. Settings Network said the cable for the Wi - Fi connection is not connected or the device at the other end does not respond.

    Interruption of the WiFi connection.  Green light is the Airport Express.  Settings Network said the cable for the Wi - Fi connection is not connected or the device at the other end does not respond.  Tried to reset Airport Express, but remained light amber or orange flashing.  I unplugged it and waited and plugged back into the light turned green.  Rebooted computer (Mac Pro). Parameters of said the same thing.  Managed to create a WiFi "network with the ethernet in the network settings section, and yet I am wireless.  I am online but not wired and WiFi settings still says not connected, and either the cable for the Wi - Fi is not plugged or the device at the other end does not respond. I don't understand this situation.  My original WiFi name disappeared.  How I am on the internet?

    What is the brand and model of the modem Internet you have the AirPort Express directly connected by Ethernet? What exact model number is your Express?

  • Setup Airport Express: how to manually set the IP address and DNS?

    I just bought an Airport Express for the wifi in the ethernet cable that I have in my dorm room.

    To connect to the internet via the ethernet cable, I need to enter a number IP, DNS, gateway and mask provided by the dorm (as I did on my Macbook).

    The problem is that I don't see where I can do for the Airport Express. After I plugged the cable into it, it keeps wanting to configuration alone, which does not work (he's trying to "join the network" forever, without success).

    How can I configure IP, DNS etc. manually?

    Thank you much for the help

    Hello!

    I read the post and found article suggested for her: OS X El Capitan: connect to the Internet or a network using Ethernet

    Thank you!

  • I just got a new modem (Arris SB6190) and now my Airport Extreme does not connect.  It worked fine with the previous modem (a rented one TWC).  Help!

    I just got a new modem (Arris SB6190) and now my Airport Extreme does not connect.  It worked fine with the previous modem (a rented one TWC).  Help!

    Always recommended to reset the airport back to settings by default and then set up again whenever you have a new modem or change your Internet Service provider.

    Turn off the new modem for at least 30 minutes. More is better.

    Perform a hard reset on the AirPort Extreme, then it turned off.

    Make sure that the Ethernet cable connects the modem to the "O" on the AirPort Extreme WAN port

    After the power of the modem 30 minutes down, turn on the modem and let it run for at least 5 minutes by itself.

    Then, turn on the airport and let it run a few minutes

    Set up AirPort Extreme again

    Important note... There are many reports of problems with the modem Arris SB and airports. Both are great products, but they do seem to work perfectly together for some users.

  • Apple Airport express records is not on the wifi network

    HI, I bought an Apple Airport Extreme new several months and I haven't connected my Airport Express so far. For some reason, the Airport Express is same does not record on the network. I unplugged for several minutes and plugged in. I don't know if there may be a software update that I missed?  Someone had this problem?  I would be grateful for any help. Thank you! Chuck

    If you have not reset the Terminal AirPort Express to settings by default and then set up again to extend the network provided by the AirPort Extreme... so now may be a good time to do this.

    As it is, the Express is not "appear" on your network because it has not been provided with the settings to do.

    If you need some advice on how to get the Express running... we will need a little more information from you as follows:

    (1) your AirPort Express Terminal has two Ethernet ports... or... does he have one?  If is has one, we need to model on the side of the unit number. It starts with an "A" followed four digits.  For example... A1264.

    (2) AirPort Express Terminal will connect to the network using a permanent connection to the Ethernet cable wired to AirPort Extreme... or... the Express will connect wireless?

    (3) what device you use to configure the AirPort Express Terminal?

    (4) If you have a Mac, we need to know what operating system they are running. If you are not sure about this, click on the Apple icon in the upper left corner of the screen, then click on about this Mac and post back with the Version of OS X number that you see there.

  • Connect AirPort Express to lemon (Rogers Rocket) Wireless Modem/Router

    I just got Rogers Wireless internet new modem/router Hitron.  I use modem/router mode.  It's great. Very fast and a lot of range. Covers all 3 floors of my house.

    I want to connect an Apple Terminal to my Hitron router with an ethernet cable and put the Hitron in Bridge mode. I want to continue to use the Hitron router as my main and only router.

    However on another floor, I would use an Apple Airport Express connected to my stereo with a jack 1/8 '' to play my music wirelessly from my iTunes from Apple.

    To do this, I need this Apple Airport Express Terminal to 'find' the Hitron router.  How can I get to find the router Hitron?

    I guess that you have a current version or recent of the AirPort Express with the default settings.

    As long as the AirPort Express is located where it can receive a strong signal of the modem/router...and wireless Hitron the Hitron aircraft provides a wireless signal that uses industry standard wireless settings, the AirPort Express can 'join' the wireless network. Wired Ethernet is not necessary.

    Note that the AirPort Express will not "spread" or "repeat" the signal from the router/modem lemon to provide additional coverage of wireless signal wireless, but it can be used to join the wireless network and provide a signal of airtime for your stereo.

    Simply use a Mac running a current or recent operating system, or an iPhone/iPad and configuration "Wizard" Apple to set up things upward. The wizard will automatically offer the correct configuration to 'join' the wireless network. All you really need to do is to enter a device name that you want to use for the AirPort Express and the password of the wireless network and confirm.

    Start the wizard by clicking on AirPort Express under the title of the new AirPort base station.

    On an iPhone or iPad, the screen looks like this:

    In the example below, the wizard has detected a network named "2WIRE902" for the AirPort Express join. You will see the name of the wireless network that provides the Hitron modem/router on your screen. Just enter a name of device for the Express, then type the wireless network password, then type it again to verify.

    Click next at the bottom right of the window and the AirPort Express displays a green light for a minute or two and you're done.

  • How can I configure my Airport Express to mesh with new cable modem bridge mode?

    Time Warner sent me a new cable modem and my Airport express still flashing orange light. How can I configure the Airport express in bridge mode?

    You can simply do using AirPort Utility on your iMac or iPhone, as follows:

    • Run the AirPort Utility.
    • Select the AirPort Express Terminal and then, select change.
    • For a Mac:
      • On the network tab, change the router Mode to: Off (bridge Mode)
      • Select to update and allow the base station restart.
    • For an iOS device:
      • Select Advanced > DHCP and NAT
      • Change the router Mode to: Off (bridge Mode)
      • Select done and allow the base station restart.

  • Do I need two devices of Airport express to extend my Comcast router/modem?

    Hi, can someone tell me if I need two devices Airport Express to extend the range of my wifi using a modem/router to Comcast?

    It all depends on "how" you want to extend the scope of the Comcast modem/router.

    IF... you can locate a single AirPort Express Terminal at the remote location where you need more coverage of wireless signal... And... connect the AirPort Express Terminal to the modem/router using a permanent wired Ethernet cable connection. ... THEN... the AirPort Express can be put in place to create a wireless network using the same wireless network name and password as the modem/router.  When you do this, then the modem/router and AirPort Express will act as a 'great' network with many more.

    IF... you can not run the Ethernet cable from the remote AirPort Express back to the modem/router and leave only it connected all the time, then your only other option would be to use two AirPort Express devices.  An express train would be located near the modem/router and connect using a short Ethernet cable. This Express will be set to 'create' a wireless network.

    The second AirPort Express Terminal can then be configured to "extend" a wireless network and wireless to repeat the signal from the first Express... assuming that the second Express is located where it can receive a strong signal first Express wireless.

  • Slow speed of the internet in the normal mode and fast speed in SafeMode - Win 7 Home Premium

    Hello

    I have a slow speed of ~ 5MB internet when I was on about 30 MB. I thought he was the provider, but my laptop under that Win Vista Home Premium Wireless is fine and I got 23 MB download speed. The office win 7 Home Premium - use Firefox browser version 31, avast antivirus and virginmedia super hub 2.

    Someone at - it ideas please? I'm frustrated by the slow - flying it in safe MODE.

    No problem, it is stated in the pilot with no yellow question mark.

    Any help would be welcome at this depressing time.

    Would it be the power supply PC or modem/router (but if it works in safe mode, it is unlikely?)

    Thank you

    Steve

    Hello

    I found it's an AMD program called Quickstream AMD that is supposed to do a slow connection for streaming video faster, but it had the opposite effect for me. I have since got rid of him and we're back to a speed of 30 MB + I had before. I have just the graphics drivers now :-)

    Concerning

    Steve

  • AirPort Express is no show in the utility AP

    Airport Express 1264 does not appear in the chart of AirPort Utility.

    I had my time airport Capsule (3rd generation) running for years.

    Buy a model 1264 1st Gen Airport Express to extend the system.

    CAT6 used to connect Express to Time Capsule but Express is a utility AirPort show

    Not connected Express directly to Mac-Mini photo express is a show.

    2 days, I played and I tried many internet configuration scenarios.

    Can you help me or would it be better to mix the 1264 and buy another Express?

    Thanks in advance,

    Mike

    AirPort Utility is based on both the mDNS (aka, Hello) and IPv6 IP protocols to find an AirPort base station.

    I suggest that you check that your Mac mini is configured for, at least, only link-local IPv6 mode. To do:

    • Run system preferences > network > select depending on how you connect your mini to the network Ethernet or Wi - Fi
    • Select Advanced
    • Configure IPv6: Link-local only
    • Click OK.
    • Click on apply.
  • Old Airport Express lost after reset of the router, the connection cannot be seen/accessed

    the train:

    -Mid 2009 Macbook Pro, OS Yosemite airport 6.3.5 10.10.5, utility

    -Existing wifi network via a former Ubiquiti AC wifi or router which gets internet radio antenna on the roof of the local ISP.

    -old (1st gen.) A1084 Airport Express used only as a customer to listen to the music of the said Macbook.

    I am a musician who has been using my old AEX to listen to the music and the recording via Airplay and Airfoil for my Roland onstage for years without problem. I don't remember how I initially put in place, but I think it's as a customer only... IE, it broadcast as its own wireless network, or extend my network wifi etc, I just use it for listening to music.

    Well, a week earlier, a disgruntled rogue ex-my local ISP hacked their radio tower and all the customer routers turned into useless bricks (and also all our wifi network names changed to a name that begins with "mother" and ends by "-ers", but that's another story).

    Local ISP technicians have managed to get my router all re - set up and working, but I had to reconfigure my wireless devices (example: wifi printer) from scratch to be able to connect again.

    The tenacious hold on is this old Airport Express.

    I try to use the instructions found online to get connected again, but nothing does.

    Yes, I tried pressing the Reset button for 10 seconds, etc... He just goes at once orange flashing or sometimes solid orange light, and don't see the Airport utility. I tried to plug its ethernet port to the router's LAN port to see if the Airport utility, would see no change, Airport utility requires no base stations found. It has no Airport icon in my menu bar and no Airplay icon in any relevant application such as iTunes.

    Remember that in past I was able to reset/reconnect after network changes, it seems to me (I don't remember how). BTW, its location is located a few feet from the router, in order to hang it up through ethernet is easy if need be.

    Once again, I only want to not to listen to the music and the tracking records of my Macbook. Roland aren't in a convenient place for an electrician. As you can tell the age of my stuff, I'm a starving musician, don't want to have to buy something new.

    Help?

    Hello lisajoy,.

    Thank you for using communities of Apple Support. I see that you are having some connection problems with your AirPort Express Terminal. You did a great job trying to get this resolved on your own! I'm happy to help you.

    To solve problems, get connected Airport please try the steps in this link:

    AirPort Express: How to join an existing Wi - Fi network in client mode

    If you connect and are experiencing problems using AirPlay and iTunes heres some more information:

    Wi - Fi base stations: how to install and configure AirPort Express for AirPlay and iTunes

    Have a fantastic day!

  • My airport express base station works but the yellow light flashes constantly how can I get the green light?

    Yellow light blinking on my airport express and I can not get the green light flashes. Internet still works well.

    When the amber light is flashing, open AirPort Utility

    • Click on the AirPort router
    • Look for the Status parameter in the small window that appears
    • Click on the little orange dot here and another window will open to explain what might be the 'question '.
  • Airport Extreme and Airport Express remove blackheads effectively.  The Eeco seems a better solution.

    Airport Extreme and Airport Express do a bad job to expand the WiFi connection in a House.  The Ethernet port on the Airport Express doesn't seem to work.  The Eeco product seems to have done a better job to extend a Wi - Fi network in a home.

    You posted your comments as an issue. You have a question or a problem that you want to get help related to Apple network so that we can try to help you to?

  • Airport Express do not work when the mac has been turned off

    I plugged our mac mini and the Airport express separately to the internet via a network hub. When I turn off the green light on the airport Mac Orange and blinks. The internet connection disappeared.

    Is anyone know how I can configure the network, so I can turn off the mac without cutting off the internet at the Airport express?

    Post a screenshot of the express installation of airport utility.

    I plugged our mac mini and the Airport express separately to the internet via a network hub.

    This seems odd... What is a network hub? They went to fashion 20 years ago. Do you mean a switch? Real model number please.

    What model is the express?

    Is anyone know how I can configure the network, so I can turn off the mac without cutting off the internet at the Airport express?

    Plug the Express directly on the main router... and implemented in Bridge mode and create a wireless network. That's the way it should be installed now... but this 'hub' could be a problem.

  • Front side bus and processor very slow speed on the Satellite 2800

    I acquired a 2800-200, and it was running very slowly.
    Sandra 2002 shows the speed of processor as well as 199 Mhz FSB as 26 Mhz. A CPU speed test confirms it. How do I (I can) fix this?

    Everything else seems normal.

    Wow, this must be a very old unit it s not I known but thank you google I ve found some details ;)

    It seems that the unit has been delivered with a processor Pentium III 700 MhZ and 100 Mhz FSB.

    I m not 100% sure about this laptop, but the new units are delivered with the TPS (Toshiba Power Saver) that controls the speed of the CPU. If the temperature rises and the cooling modules are not longer able to cool the system the CPU speed CPU should be cut to reduce the temperature.

    I think you should check these settings on your laptop and also check the cooling fans because sometimes the dust and debris to prevent the circulation of air.

Maybe you are looking for

  • EA60-155 tohiba energy saver

    By mistake I delete watch on my laptop.anybody knows how to install it again?

  • Airport express base station at will without connect to airport extreme

    I tried to get my airPort Express to connect to the extreme via my iphone using the application configuration of the airport. He finds the express and he knows I have the extreme. I said I want to extend my current network and finds it units, but I r

  • can you get me a link to atl80sp1-kb973923 - x 64 .exe?

    I need to uninstall but cannot find the Setup program in my computer. for some reason empire total war must visual c ++ old to work. I can't find this specific anywhere

  • removable disk does not detect

    Hello I'm having the problem with the removable disk. In accordance with the instruction given, I installed USB 2.0 successfully. But also I receive the statement as "in the Insert the diskette into the drive. My unix is detection of card reader. But

  • Registry key is corrupted all-in-one HP officejet 7110

    I know someone's going to need more information I can provide, but I'll add what I can here. While trying to discern why the printer stopped accepting applications for the Internet printing and software (test page printed fine): I received a message