Airport Extreme appearing does not in Airport utility
Airport Extreme is connected to the internet but will not be displayed in the Airport (see image below) utility.
My home network consists of the following:
Cable modem Comcast Arris TM722
- Airport utility to view an IP from Comcast ending 1
- Now, it displays 10.0.xx.1 and is connected to the internet, but the IP is really the same old Comcast ip address ending 1
Airport Extreme Office worm 7.7.7 (primary - dhcp)-has an IP from Com
- Airport utility to view an IP from Comcast ending with .xxx and internal ip address of 10.0.xx.1, but the ip address is really the same old Comcast ip address ending in .xxx internal ip address of 10.0.xx.1
Airport Extreme lounge worm 7.7.7 (bridged)
- Airport utility to view the internal IP ending par.2 (static)
Airport Express Patio worm 7.7.6 (bridged)
- Aport utility always displays an internal ip address, ending (3) (static)
All computers are:
MacOS worm 10.11.6
Airport Utility ver 6.3.6
Question: Neither Airport Extreme appears in Airport utility (both are gray with yellow triangle! icon), the Airport Express appears fine. Everything worked as it should until yesterday, I haven't changed anything. From time to time I run a vpn on one of my Mac client.
I can access one of the ends using the option "Set up other" under the menu of Airport utility file.
Wireless and internet work as it should, the usb drives attached to the 01 extremes are accessible.
Things I've tried (based on the reading of the support articles that I found from 2013 to present):
Electric bike on everything.
- Does nothing.
Soft reset everything.
- Does nothing.
Hard resetting everything.
- Does nothing.
Affecting the default extremes and reconfigure them.
- Does nothing.
Definition of 'Configure IPv6' to link-Local only on the two extremes.
- Does nothing.
Activation of the guest network
- Makes the show of extremes, but only one at a time, not both.
I am completely confused and looking for suggestions.
Thanks in advance.
This is because by turning back to my Mac on the extremes of the airport, so basically it comes a problem of iCloud.
The fix in this thread of Mac rumors-
In. short, turn off the back of my Mac on your Airport Extreme (or time capsule).
We expect that Apple will fix this.
Tags: Wireless
Similar Questions
-
D810 new camera appearing does not pix in raw files into components 11
D810 new camera appearing does not pix in raw files into 11 elements and lightroom 4
8.7 DNGC can be found here: http://www.adobe.com/downloads/updates/
You can buy upgrades for LR or PES, here:
-
Said Airport utility cannot find extreme AP, which used to be on the network and shows no other devices on the network. But all devices (MBPro, MBAir, iMac, iPod touch, iPad 2 air2) are connected to the internet. Wireless backups on external drives are being completed. El Capitan 10.11.2; Airport Utility 6.3.6. How do "seen it all" again?
What should do?
All you can do is to try to circumvent some of the bugs crawl into El Capitan.
Given that the AirPort Utility becomes easily confused about what are the devices on the network, it will sometimes help to perform a complete cycle of power on the network. If you want to try it...
Power off all devices on the network, routers, computers, accessories, mobile devices, printers, etc... in any order you want
Wait a minute
Turn on the modem first and let it run by itself for 2-3 minutes
Then, switch on the device connected to the modem and leaves turn a good minute
Keep power devices one at a time about a minute out until the entire network is back
Recheck the AirPort Utility
If still no luck, we will have to try some repellent on Mac.
-
SSD not included does not in disk utility
I have Macbook Pro 2014. during the day something happened where I got a folder flashing with the? Select this option. He held the repair shop and they said the hard drive was completely gone. O bytes of data. Instead of paying $150 for them to replace it, we decided to drop one in ourselves. I put the new SSD OWL and now which does not appear in the disc utilities. I tried it a few times and once it appears I can't erase or partition. I feel like there is something else. Any help as to the source would be appreciated! There are storms that day, so maybe something got fried? I had the computer on what I thought was a surge protector but just a fancy output Extender.
It is a pity of the storm or just a bad SATA cable.
-
CarPlay appearing does not in iPhone->; settings->; general
I can't CarPlay to work with my iPhone 6s in my VW Jetta S 2016 because it does not appear in the settings-> general on my iPhone. My wife, 3 children and I all have the iPhone 6. Have CarPlay in settings-> general (and therefore can connect to CarPlay), while I have not (and so I can not connect and get an error message when you try to connect my device is not compatible with CarPlay).
Someone has a similar problem? Have a work around? I really don't want to have to set my phone like new because I don't want to lose all my data backup so I hope that there is another solution. AppleCare tried and they were left speechless.
Thanks in advance.
Robert Marino wrote:
I can't CarPlay to work with my iPhone 6s in my VW Jetta S 2016 because it does not appear in the settings-> general on my iPhone. My wife, 3 children and I all have the iPhone 6. Have CarPlay in settings-> general (and therefore can connect to CarPlay), while I have not (and so I can not connect and get an error message when you try to connect my device is not compatible with CarPlay).
Someone has a similar problem? Have a work around? I really don't want to have to set my phone like new because I don't want to lose all my data backup so I hope that there is another solution. AppleCare tried and they were left speechless.
Thanks in advance.
Do you have restrictions set up on your iPhone? CarPlay may be limited under the Restriction settings on your iPhone.
SCR
-
my podcast last week by appearing does not in my Itunes store
My latest podcast does not appear in my itunes store?
Several people have complained recently that the store is slow to update is possible that you have been affected by the same thing. Sure, it might be something else, like some kind of technical problem with your workflow, but obviously I can't diagnose that without being told its URL.
-
Apple TV appearing does not in the airtime.
OK, so here is my problem. I'm at my fathers House. I want to show a video on the TV with its apple tv. But under the airplay icon its apple tv does not appear. I can see its apple tv from iTunes and play music or a movie with her on his tv, but I don't see using airplay to reflect my office. Any ideas on how to get it to work?
We have solved the problem. After reading several other posts on problems with ATV, we checked the operating system. Of course, there was an update. After the software update, it worked as it was supposed to. Now, it gives me confidence to get one of the new mountain BIKE for me.
-
USB-5133 appearing does not in MAX, "loader" shows driver in Device Manager.
I have a USB-5133 can I use it on several computers. I'm putting it on another PC (XP Pro). The device is recognized by windows and it goes to install the drivers. When it's done, in the Device Manager-> data acquisition devices, I see "NI USB-5133 Loader. On other computers, he said only: "NI USB-5133. The green light on the device is NOT on, and the device does not appear in Measurement & Automation Explorer.
No idea why the appropriate driver is not loaded? I have NO-SCOPE 3.5.2.
Hello Gallamine,
The NI USB-5133 Digitizer is a plug-and-play device, try removing the device in MAX. Then, unplug the device and plug it in again. The computer should record the device of MAX as "NI USB-5133. If this does not work, the data base of the MAX could be damaged. To resolve this problem, see the following link:
http://digital.NI.com/public.nsf/allkb/2C7480E856987FFF862573AE005AB0D9
Finally, if the database setting does not resolve this problem, try to reinstall the latest version of OR-SCOPE.
Kind regards
Roman S
-
OfficeJet Pro 8620 appearing does not in devices and printers
Short computer news:
Computer 1 - ENVY HP dv7 running 64-bit Windows to 8.1
Computer 2 - Dell XPS 12 running 64-bit Windows 8
I recently bought a new 8620 Pro of Officejet and currently am having problems actually use it.
I have already installed the driver for long from the HP website, but the printer does not appear in devices and printers. Not only, I'm unable to send print jobs to the printer from my computer.
However, the thing that is most troublesome is the appearance of the printer in places such as Device Manager and the print dialog box. I would like to remind that even using the print dialog box or print through any application (E.g. Microsoft Word) in fact the print job never crosses.
I already reinstalled the driver several times only to get virtually identical results. This problem only seems to occur on my computer main use who WANT a HP dv7.
I have however a second computer is a Dell XPS 14 where I can use the printer very well.
With the results of the SFC is not not a complete success and the issue be isolated to this computer, I think that it is time to perform a Refresh of the Windows 8 operating system.
How to refresh, reset or restore your PC<>
It would be wise to perform a backup system to be on the safe side.
Backup of your files (Windows 8)<>
See you soon,.
-
Dialog OPEN/SAVE not appearing does not in ALL programs.
Open and save diagouge boxes do not appear in all programs, although o know their, brcause when I try to click on the program, it is not anythingm to do more when I press the program escape to become accessible, please somone help
Try this. This practice on a window you can see open a file opensdialog box. Press Alt + space. To move, then press M. and move the mouse. Thisshould align the window with the mouse. If this is not the case, use the arrow keys.If M does not try S for size and see if you can resize the window.It is a little curious that all part programs that. Office programs use theirOwn to open dialogues not the system. Some programs to specify the locationof the dialog box. Well try the above.--..--"riokusho" wrote in message news: 077cab2c-e5e3-479b-bf8f-a63765f02647...> Open and save diagouge boxes do not appear in all programs.> nice o know their, brcause when I try to click on the program it> no anythingm when I press the program become escape> absolutely, somone please help -
Cursor/Caret appearing does not in EditField?
I have an EditField which cursor/insertion sign does not appear. What Miss me? Here is my code (and I use 4.5.0 and SIM 8300):
myEditField = new EditField( "", "", 7, Field.EDITABLE | Field.FIELD_LEFT ){ // inner class method to set field size (setExtent) public void layout( int width, int height ) { int maxFontWidth = getFont().getAdvance( "W" ); int fieldSize = myEditField.getMaxSize(); int newWidth = maxFontWidth * fieldSize; setExtent( newWidth, getPreferredHeight() ); } // inner class methods to handle changes onFocus/onUnfocus public void onFocus( int direction ) { super.onFocus( direction ); invalidate(); } public void onUnfocus() { super.onUnfocus(); invalidate(); } // inner class method to set text/background colors public void paint( Graphics g ) { if (myEditField.isFocus()) { g.setBackgroundColor( Color.LIGHTGREY ); } else { g.setBackgroundColor( Color.WHITE ); } g.fillRect( 0, 0, getWidth(), getHeight() ); g.setColor( Color.NAVY ); g.clear(); g.drawText( myEditField.getText(), 0, 0 ); super.paint( g ); } }; // end inner class overrides
Try this. Sorry do not know what I changed to your code at random is went through she change things that did not look right. However, the 'trick' is the drawFocus.
In any case, I need to real work, please review, compare, test etc and see how you go.
myEditField = new EditField( "Label", "Text", 7, Field.EDITABLE | Field.FIELD_LEFT ){ boolean _drawFocus = false; // inner class method to set field size (setExtent) public void layout( int width, int height ) { int maxFontWidth = getFont().getAdvance( "W" ); int fieldSize = this.getMaxSize() + this.getLabel().length(); int newWidth = maxFontWidth * fieldSize; super.layout( newWidth, height ); } // inner class methods to handle changes onFocus/onUnfocus protected void onFocus( int direction ) { super.onFocus( direction ); invalidate(); } protected void onUnfocus() { super.onUnfocus(); invalidate(); } protected void drawFocus(Graphics graphics, boolean on) { _drawFocus = on; super.drawFocus(graphics, on); _drawFocus = false; } // inner class method to set text/background colors public void paint( Graphics g ) { if ( _drawFocus ) { super.paint(g); return; } int currCol = g.getColor(); if (this.isFocus()) { g.setBackgroundColor( Color.LIGHTGREY ); } else { g.setBackgroundColor( Color.WHITE ); } g.fillRect( 0, 0, getWidth(), getHeight() ); g.clear(); g.setColor( Color.NAVY ); super.paint( g ); g.setColor(currCol); } }; // end inner class overrides
-
D: drive not appearing does not, impossible to install software.
Original title: d ' drive not appearing not
the attempt to load software and player D appearing not
Hello
To provide the proper resolution, I would need more information on your side.
1. is the specific issue during the installation of a particular program?
2. do you get an error message? If Yes, what is the exact error message?
3. are you able to see D: drive in Windows Explorer?
I suggest you try the procedure described in the article and see if it helps.
My drive does not appear in Windows Explorer
http://support.Microsoft.com/kb/330140Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base. How to back up and restore the registry in Windows:
http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registryCheck out the link for more information.
How to solve problems when you install or uninstall programs on a Windows computer
http://support.Microsoft.com/kb/2438651Hope this information helps. Answer the post with an up-to-date issue report to help you further.
-
APPS_TS_TX_DATA Tablespace appearing does not in OAM
Hi @Hussein snoussi
I'm having a strange problem in my system DEV. When I go to OAM-> dashboard-> site map-> monitor-> database-> storage, the APPS_TS_TX_DATA tablespace does not appear on the list of tablespaces. I went to sqlplus and run the following query:
SQL > select TABLESPACE_NAME
2 of dba_tablespaces
3 order of nom_tablespace;
The APPS_TS_TX_DATA tablespace exists on a list of tablespaces that appear. So I do not know why the APPS_TS_TX_DATA tablespace does not appear on the OAM.
Please help me.
Kind regards
Clamarion.
Hi guys I have solved the problem! That's what I did:
I just added a data file for the APPS_TS_TX_DATA tablespace and now the tablespace makes its appearance in OAM.
It's really weird.
-
V29 appearing does not in Android
Hello
When I submit my .sdk file, my folio v29 does not appear in the library on android devices. Why is this?
You post the folio v29 as Public using the same application account used to post other folios? (I assume you mean .apk, not .sdk.)
-
THIS IS LAME: css coding to a basic appearing does not in level browsers
I don't know why, I'm having such a fundamental issue with Binder sheets CSS in dreamweaver, have the CSS code will appear correctly in the design window, but the CSS does not appear in all browsers? Anyone else having this problem? Is there something wrong in the formatting?
CSS script @charset "utf-8";
/ * CSS document * /.
.1 a: active {}
fonts: Verdana, Geneva, without serif.
font-size: medium;
background: #0F6;
color: white;
}
.1 a: hover {}
-adjust the alignment: central;
font-size: medium;
Background: #0CF;
}
The HTML code is:
HTML <! DOCTYPE html >
< head >
< title > examples of button < /title >
< link href = "buttons.css" rel = "stylesheet" type = "text/css" media = "screen" > "
< / head >
< body >
< div class = "1" > < a href = "#" > button < /a > < / div >
< div class = "2" > < a href = "#" > button < /a > < / div >
< div class = "3" > < a href = "#" > button < /a > < / div >
< div class = "4" > < a href = "#" > button < /a > < / div >
< div class = "5" > < a href = "#" > button < /a > < / div >
< div class = "6" > < a href = "#" > button < /a > < / div >
< div class = "7" > < a href = "#" > button < /a > < / div >
< div class = "8" > < a href = "#" > button < /a > < / div >
< div class = "9" > < a href = "#" > button < /a > < / div >
< div class = "10" > < a href = "#" > button < /a > < / div >
< / body >
< / html >
I agree. There are some things I've learned that not workin CSS because they are already analysed by the browsers rules or definitions. Numbers of class or ID for example. Class or ID named "Center" 'left' (or 'middle') or 'right '.
Maybe you are looking for
-
Printing from 8600 second tray of hp
I can't configure my 8600 so that when I print from my pc it knows Tray 1 size letter paper and tray 2 paper of legal size.
-
Hello I try to use NI9268 CAN module for the first time (with a CRIO 9081). When I connect it I can get it to the MAX but I got the following error after the self-test: 0xBFF63001 (screenshot 1). Then, when I want to start the bus interface, I have e
-
Once the publication to a Windows Movie Maker project, can I go back and make changes?
make changes to the film maker projects Once the publication to a windows movie maker project, can I go back and make changes?
-
Problem to disable IPV6 router advertisements remove command
Hello: I have a Cisco 877 with IOS: Cisco IOS software, software C870 (C870-ADVIPSERVICESK9-M), Version 12.4 (24) T6, VERSION of the SOFTWARE (fc2) I implement Hurricane Electric Tunnel Broker, but actually to do this test, I unplugged the Wan Interf
-
The display to connect to the system?
Hi, how do I know the timings of when connect us to the system and that we did Hibernate or shut down the system? And what is the work that we had done between log on shutdown?