Airport extreme disconnects when the ivp6

Similar Questions

• Why doesn't a USB drive I have previously used with AirPort extreme appear in the finder when used locally with my Mac?

  Why doesn't a USB drive I have previously used with AirPort extreme appear in the finder when used locally with my Mac?

  I tried to plug it into my mac to transfer files locally but will not be displayed in the finder or disk utility. Anyone know why?

  MacBook Pro (2015 retina) OS X 10.11.2 El Capitan

  Have you shut down / turning your Mac off... power off the USB drive... Connect the drive to the Mac... start up the Mac... then, turn on the USB drive?

  If no help, there are a number of posts to the thread in the forum El Capitan of support from users who have problems on their Mac USB.  You can post there to see if anyone has the answers.

  OS X El Capitan

• Airport Extreme works but the State of the led is off

  Airport Extreme works, but the State of the led is off, it is brand new and I can set up this last but the led stays off, showing no decided (green color or ambar)

  Could someone help with this?

  Thanks in advance.

  Hardware failure - defective leads.  Take that back for a new one, as big a PITA, you should.

• MSN disconnects when the cat and I have to sign, how can I solve this problem?

  Origianl title: MSNMSGR

  MSN disconnects when the cat and I have to sign, how can I solve this problem?

  Hi Sorauren,

  Remember to make changes before this problem?

  
  Disable the security software and verify afterwards; Follow the steps mentioned in the link below

  Disable the antivirus software

  If you use a non-Microsoft security software, you can check the documentation provided with the program to achieve this.

  Configure your security software to allow MSN to communicate on the internet.

  Important: Re activate security software once everything is done.

  You can post your query on the Windows Live Forum.

  http://windowslivehelp.com/product.aspx?ProductID=2

  In addition, see the link below

  How to contact MSN customer service
  http://support.Microsoft.com/kb/940784

• Manufacture of extreme dual band 802.11 airport "buzz sound" when the power supply is attached

  Hello

  which is very probably wrong with my Airport Extreme?

  My Airport extreme dual band 802.11 done "buzzing" sound when the power supply is attached. The sound disappears immediately when power is disconnected and begins as soon as you connected again. It started two weeks ago, and it's really annoying.

  THX,

  Laura

  Most likely, the question is a bad capacitor in the diet. These can fail and are, unfortunately, not serviceable by the user... unless you have experience with electronic repair. You can try Apple, but chances are that you will have the best chance to get a replacement from another source, such as Impact Computers & Electronics or eBay.  I'm sorry.

• Cannot set the Airport Extreme to extend the existing network

  Network WiFi of my holiday home is provided by the router from my ISP (Time Warner). I have an Airport Extreme, which used to be configured to provide the WiFi network to another well, and I would use it to extend the existing on the TWC router network.

  I had a lot of trouble to do a factory reset on the Airport Extreme, but I'm sure I managed (by turning on with the pressed reset button) after several attempts. At least the extreme doesn't show signs of the old network, he has provided.

  When I try to set it up in the Airport utility, he wants only to create a new network. If I click on 'Other Options' and select 'Add to an existing network', the next screen is titled "This Airport Extreme will create a network" and prompts to enter a new network name and password. (Specifying the name of the network current generates an error because the network already exists, as I expect for the creation of a new network.)

  Any ideas on how to tweak this Airport Extreme by extending a network?

  TIA,

  Doug

  P.S. I have reviewed plugging extreme in one of the TWC router EtherNet ports and create its own WiFi network (with the advantage of adding support for 5 GHz), but the last time I tried I lost all connectivity; I'm afraid that the ISP network might protect against too broad network, although the glitch may have been a coincidence. If anyone has experience/ideas on this alternative configuration, I might be willing to try again.

  AirPort Extreme would not be able to connect using a wireless connection and to extend the wireless network of the ISP, but if you can connect the AirPort Extreme to the ISP using a permanent router, wired Ethernet cable, then AirPort Extreme could be used to provide broader coverage of wireless in this way signal.

• Please let know us if it is practical to use Airport Extreme to extend the network wireless in a big house.

  I suspect that an original device connected to the modem cable... an intermediate device... and there should be a final device in a place further from the original device. I note that tech online article does talk to a wireless network using the 802.11ac signal. Would be grateful for advice on the feasibility of this. I currently have a Time Capsule, Airport Extreme connected my cable modem. I have a ~ 6 600 feet at home with the press on the 2nd story room and the other end of the House.

  You can use Airport Express to extend wireless created by an AEBS. If the AEBS is a model of turn then it supports 802.11ac, but most dishes are not. New the AEX take in charge 802.11ac, but it is of little use if the AEBS model is not.

• signal no disconnection when the page is closed by the gesture of eye?

  Hello

  Falling on a particular issue... First of all, I connect my context object to signal a bit of javascript using the onCreationCompleted

  onCreationCompleted:
  {
          // When the top-level Page is created, direct the data source to start
          // loading data
          MyObject.signal_1.connect(onJavaScriptFunction_1);         MyObject.signal_2.connect(onJavaScriptFunction_2);               MyObject.signal_3.connect(onJavaScriptFunction_3); }
  

  So far everything is going well, but if I unplug these signals, the page is busted, so the next time that the page is created, these signals will be attached to the same javascript function once more and so on for every time that the page is re-created.

  Then I thought, I should unplug these signals when the page came out... Therefore, I have given the NavigationPage because I couldn't see any signal onPopped or onDestroy... So I used the following code:

      paneProperties: NavigationPaneProperties
      {
          backButton: ActionItem
          {
              onTriggered:
              {
                  console.debug("Popping page, disconnect signals...")                // Disconnect signals
                  MyObject.signal_1.disconnect(onJavaScriptFunction_1);                      MyObject.signal_2.disconnect(onJavaScriptFunction_2);                 MyObject.signal_3.disconnect(onJavaScriptFunction_3);
  
                  // define what happens when back button is pressed here
                  // in this case is closed the detail page
                  navigationPane.pop();
              }
          }
      }
  

  After testing a few creation of the page / page popping, everything works fine. Signal is attached only once. But every time I close the page by using the gesture of look, then I suddenly I begin to see multiple signals attached to my context object... as directed by the console log output:

  emit > signal_1
  onJavaScriptFunction_1()
  onJavaScriptFunction_1()
  emit > signal_2
  onJavaScriptFunction_2()
  onJavaScriptFunction_2()
  

  My questions

  1. Where can I sign out signals to avoid leaving the unwanted signals connection?
  2. All the QML object seems to have a signal of {onCreationCompleted}, is an onDestroyCompleted or something similar?

  Thank you

  Hello

  There is no equivalent onCreationCompleted.

  But you can set a JavaScript function such as

  Page {
    function cleanup() {
      // disconnect signals here
    }
  

  and call from NavigationPane onPopTransitionEnded:

  NavigationPane {
    onPopTransitionEnded: {
      page.cleanup()
      page.destroy() // destroy the page if it was created dynamically
    }
  

  UPD: another option is to use the element of connection of QtQuick. According to this thread, it works in Cascades:

  http://supportforums.BlackBerry.com/T5/native-development/QML-connections-element/m-p/2063301#M9550

  Connect/disconnect signals automatically, but I haven't checked this app cascading.

• Auto Disconnect when the computer shut down wanted!

  I'm working on two computers, home and office. Physically, they are 4 miles away. If I forget to disconnect when I leave my office (the computer be here correctly closed), in order to continue my work at home, I have to get back to the office to do this. Why in God's name did not do something on this issue? An option in the preferences which disconnects automatically CC when the computer is off?

  You are allowed to two facilities of the site.

  If you shut down a computer, whenever you start a machine, you will need to log-in to ACC again.

  A machine has nothing to do with the other machine being left or turned off.

• Satellite L650 - WIFI connection disconnects when the AC adapter is removed

  Hello

  I bought Toshiba Satellite L650 in April 2011 in Canada.It works perfectly well in the Canada, but when I bring the laptop computer in Hong KONG to use, I have found the drops connection wireless lan or completely disconnected very often.

  However, my 3 other laptops in Hong Kong has this problem.

  I have
  -updated all the bio for window and software for the network adapter wireless;
  -deactivate the energy saving level
  -increase the TX power lever
  -the fact that said the following link

  http://support.Toshiba.ca/support/TechSupport/TSBs/viewtsb.asp?docid=TSB001593

  and still does not help.

  It's really frustrating to browse when internet is on and off.

  Could someone please help?
  Thanx
  T

  Hi mate

  I found a few solutions here on the forum and you have done great, but you forgot to update the WLan driver.

  So please update the WLan driver and disable the Wlan to economy settings too much energy.

  I think this should help you solve this problem!

  Good luck

• Sound card disconnects when the guest operating system tries to use

  I tried Ubuntu 10.10 and 11.04 as guest with VMplayer 3.1.4 under Windows 7 SP1 32 bit. As soon as it loads the login screen and attempts to play the drums, VMplayer gives the following errors and disconnects the sound card:

  [msg.sound.defaultbadwaveopen] the default audio device cannot be opened:
  | A device ID has been used that is out of reach of your system.
  | [msg.pciSound.HostOpenDspChannelFailed] Sound cut.

  When I plug the sound card and reload Pulseaudio in the comments, the same error occurs. I use the audio system integrated with the Microsoft High Definition Audio driver, but I do not know what chipset it uses. This problem could be related to SP1?

  Hi Scott,.

  Welcome to the forums.

  Take a look at the next thread on the same question in case it might help you:

  • http://communities.VMware.com/thread/291874

  Good luck.

  Concerning

  Franck

• C50D satellite - Internet disconnects when the display is in power saving mode

  Hello

  I have a C50D Satellite with Windows 8. I adjusted all the energy savings to not sleep or Hibernate including HDD to stay active when plugged in which it is at all times, but when screen DIMM and it turns off cutting my internet through eathernet and reconnects only when I wake up on the screen.

  I checked all settings power several times, and as mentioned above, all is set correctly all the ideas.

  Thank you

  To be honest I never heard of this issue. Please check the Windows settings, but also the power settings Toshiba you can find in the power settings for each power profile.

• Virtual machines, run extremely slow when the console is consulted 2 virtual machines Windows Server 2008 64-bit, Windows Server 2003 32-bit, 2 VMWare for virtual machine

  I'm in a difficult situtaition here.  I am the daily contact with a new client.  My linux guy, who is also my boss who is very busy, asked me to do some research trying to find answers for what's not on this server. We have a dual Quad Core 2.5 Ghz Lenovo server with 10 GB of ram.  2 500 GB hard drives are Raid 1.  We run Virtual Server VMWare 2 on a Debian with Gnome installation as a user interface for the side of things Linux.  Grub is the boot loader. There are two virtual machines running on the server.  The one machine that serves as a domain controller is a Windows SBS 2008 Server 64 bit, and the secondary machine has no responsibility domain.  The second machine is a Windows Server 2003 32-bit.  the 10 GB of ram 6 GB is allocated to the SBS server and 4 GB to the 2003 server.

  The problem I am running into is that everything is so slow, especially if I connect remotely to do any sort of administration on the network.  Some examples of issues I've noticed is that as soon as I log on the server via Remote Desktop SBS console management Windows Server spike to 80-95% CPU usage and it will not stop unless I close the management console.  Another instance is that if I open Backup Exec 12.5 on the SBS server it will kill the speed of the processor as well.  Long story short, there are a lot of machine to do what we need to do, but something is not configured right and non of us know what it is.  Another point to note is that the server has been in production for about 3 weeks, and the server seemed to have locked up just twice.  My professional guess is that over time, some chose thing is eating causing the crash of the memory.

  Sorry I do not have much technical insight on this topic, but this is the best I have to offer.  Any questions you all have, I'll ask my people and see if I can answer, but I could really use your help here.

  Thank you in advance,

  Heath

  2 things:

  1 you really need hard drives more than 2 in a RAID 1 for proper performance under load. More disks the better. Although I don't think that's what your problem is, he'll probably be the problem Next you will do.

  2. I don't know exactly where the configuration file is on your box of Debian for VMware Server, but you should consider adding the following options in the configuration file (on windows, it's the vmware 'config.ini'):

  prefvmx.minVmMemPct = "100".

  MemTrimRate = 0

  sched.mem.pshare.Enable = "FALSE".

  mainMem.useNamedFile = "FALSE".

  If you do some research, you can read about what these options (the largest is the memory page sharing - it should only be left on if you have a bunch of similar virtual machines running on the same box, that you don't have.) I honestly know why this is on by default, he kills the CPU when virtual machines are running different operating systems). These are the options that I now use standard in VMware Server deployments, with huge performance increases after you have added the. Just give a try.

  Edit: Also make sure that you have installed in your virtual machines VMware tools.

  Dimitri Rodis

  Integrita Systems LLC

  http://www.integritasystems.com

• Intel 2200BG always disconnect when the value g on a Satellite M70

  Hello

  After months of go around forums and messages, I still have the same problems with my card Intel 2200BG wireless.
  Of course, I've updated my bios, drivers,... but the problem remains.

  I called toshiba france and they were just as good to send me a link to the latest drivers...
  I have no problem with mode b and use channel 11.
  I think I'll just throw this card and buy another brand.

  Any suggestion?
  Thanks for the help
  JPaul of<>

  Hello

  Don't always blame your WLan card in Notepad.
  Wireless performance depends on the wireless card, but also on the WLan router!

  You define the G standard only on the router or wireless network card?
  In the WLan card properties, you should be able to put the B, G or two B/G.
  Also turn off the power save option on this map.

  Maybe you checked only the Toshiba driver for the latest Intel WLan driver page. Download the latest driver on the Intel site!
  You use the Intel ProSet utility?

• Airport Extreme dislike gigabit speed

  I'm having a strange problem. Backstory... I have an older Ooma VoIP device. It works very well.  The connection is Modem > Ooma > router - my modem (ARRIS Surfboard SB6141) and I use Airport Extreme. When the devices are connected as indicated everything works fine. The modem has a 'connection' light which is orange with this configuration. According to the manual of the modem, this light indicates Ethernet (10Base-T) or Fast Ethernet (100Base-T) is running.  When I remove the Ooma system and connect the modem directly to the router, the yellow led lights up blue saying that the signal that the modem sends is now a high-speed Gigabit Ethernet (1000Base-T).  Sounds great, but my router then ceases to broadcast and distribute a signal, directly and without wire connected with a cat6 cable.

  You could say, then leave him alone and I can do, but I'm willing to reconfigure my system with updated Ooma device, and causes my modem from orange to blue, thus losing my Wi - Fi.  I talked to Arris (modem does not work as expected), I talked to Ooma (if the signal is working on their device, they see not the problem). So that the leaves of the router.  Can anyone figure out what's going on? Why did I lose my signal when I go directly from the modem to the router when the speed seems to be better?  (Yes, I restart both modem and router in the right order).

  Any help would be appreciated.

  Thank you

  David

  It seems that your Ooma device only supports (up to) 100 Mbps Ethernet connections. On the other hand, does your AirPort Extreme support 1 Gbps Ethernet.

  The reason why you can be make connectivity issues when connecting your Arris modem to an extreme that is there has been many positions related to this. Specifically and the problem of incompatibility between the SB61XX series modems and airport base stations. This is not bad in themselves, they just don't "play well" together. Typical complaints is poor, transfer rate, and inconsistent Internet connectivity.

  Basically, you have two choices:

  1. Replace the Arris modem with another modem series of non-SB61XX. If you plan to go this route, you must select a modem recommended by your ISP.
  2. Replace your extreme with a non-Apple router.