Airport utility does not have Wifi

Similar Questions

• Connected to but the Airport utility does not see the time capsules

  Hi, I have several time capsules.

  I can connect to the web, but the airport utility does not see the time capsules.  I tried to restart the time capsules, router, computer, but I still don't see any of the devices on the network.

  What now?

  Have you tried the airport utility in the iOS version... Download on the App or iTunes store and load... Works better than the Mac version.

  Other than what Mac running what OS do you use?

  This modem you have and how is the installation of TC on the network.

• Airport utility does not support my Airport - options to change the channel?

  I have an older Airport - extreme, I think, and the utility does not support.  I'm out of luck to change channel?  Time Warner said their modem did not support my newest Airport (? it's TWC) and now the internet keeps smoking at least once or twice a day.

  I suggest that you keep it simple.

  Your airport automatically analyze and choose the best channel to use when it lights up. So, if you have not done for some time, powering to the airport, wait a few seconds and then put it to the top.

  Even if you could change the channel... How would you know which channel to choose?

  Time Warner said that their modem did not support my most recent airport

  Time Warner will only support for a product they have received for you.  But this does not mean that a router from Apple will not work with their service. I've used Apple products for over 10 years with Time Warner.

• Linking New Extreme old Extreme and Express. New Airport utility does not recognize old Extreme/Express

  I had a linear new extreme connection (connected to the wireless model Cat5) related to the old extreme then Express (newish).

  I would have put in place using airport Utility (for example) 4 years ago and has worked well.

  I changed my wireless modem (formerly broken) but cannot now reconnect the old extreme and express to the extreme again.

  The extreme new connects to internet just fine as long as it is in Bridge mode (does not work in DHCP/NAT mode).

  My real question is the utility software Airport now seems not to recognize the Express extreme or old old to get re-connected.

  The manual of Apple still shows configurations using the old utilitarian approach Airport (with each unit sitting on LHS page)

  If you're still using OS X (10.5.8)... as, you enter in your profile information... then the AirPort Utility in this operating system must be able to recognize the old AirPort Extreme and Express.

  However, if you have updated to a new operating system such as the Mountain Lion (10.8.x), Mavericks (10.9.x), Yosemite (10.10.x) or El Capitan (10.11.x)... and... you have more "round" or version 'dome' in the form of AirPort Extreme, and an old version of the AirPort Express A1084... so, the new version of AirPort Utility is not compatible with older airports.

  So, this would help a lot if we could get clarification from your part...

  (1) what operating system you're using now?  If you are not sure about this, click on the Apple icon in the upper left corner of the screen, then click on about this Mac and post back with the Version of OS X number that you see there.

  (2) what version of the AirPort Extreme you may have.  Is it a 'rounder', or 'dome' in the form of version... or... The "flat" or "square" version? If you have flat or square version, the number of model of the device is required. It is on the lower part of the airport, probably integrated in the base of carpet of MOSS. The model number starts with an 'A' follow-up of four digits. Please post back this information.

  (3) what version of AirPort Express you have?  Please look for the model number on the side of the Express. It is difficult to see, with grey lettering in a certain context, so you need to perhaps good lighting and glasses to discern the number of reading.  As extreme, the Express, model number starts with an 'A' followed by four digits. Please post back this information.

  Once we have the information we need, we know more about how to proceed from this point.

• Airport utility does not Time Capsule

  I recently bought a 2 TB TimeCapsule airport.  The ethernet cable from the router is plugged into the WAN connector and the power is on the Time Capsule device.  I can access internet via WiFi labeled Apple 686555 network device, but the Airport utility cannot locate the TimeCapsule which is 10 feet.  He sees the Apple 686555 network device, but not to join the airport Time Capsule.  The error is very descriptive: "an unexpected error has occurred.  Try again. "Very revealing.  Don't know what to do.  iMac running OS x 10.10 and 6.3.4 airport

  Thoughts?

  The "unexpected error" is caused by a bug in Yosemite.

  Try powering down of the time Capsule by pulling the power cord to the back of the unit or by unplugging the power cord from the wall AC

  Restart the Mac.

  After that the Mac was for a minute or two, switch on the time Capsule and let it run for a minute

  Then try the installation again

• Satellite L650-14F - system does not have WiFi

  Hi all

  I've seen a few topics about this, but I still can't solve my problems. I have brand new Toshiba Satellite L650 14th but I can't seem to use my WiFi.

  The problem is that the system does not recognize, even in the Device Manager there is nothing. I downloaded the driver from the toshiba site, but when I run it nothing happens. I also tried the BIOS update and install the package of added value, but still nothing. Also, someone mentioned editing tool of Network Device ID registry settings, I downloaded that too, but when I run also nothing happens. I did a lot of research and could not find the solution or the driver work.
  Furthermore, I have windows 7 64 bit.

  Any ideas? I really need wifi, my started classes two weeks ago and no internet at home, I can't do anything useful. Thank you.

  Hey Buddy,

  If the system doesn't recognize the WLAN card, it seems to be disabled.

  You should check the key combination FN + F8 which can enable/disable the WLAN connection.
  In addition on some laptops you can toggle the wireless LAN in the BIOS.

  Check this box!

• Airport Express does not extend WiFi range

  OK, I posted a long time will cost about an airport older Gen Express not extending my wifi range when implemented to extend (wireless) and connected to a network of Apple (Airport Extreme). No solution, so I gave up.

  Still frustrated by the lack of a strong wifi signal to my back door / Garden (it is a small house!), I bought a new Express and set it up again to extend my current network, placed it on my window sill back room (where I get a pretty good wifi signal on my iPhone and iPad), but about 6 feet of him, the other side of the glass in my garden I get a flicker of 1-2 bars the signal strength that is de-energized intermittently.

  I get no significant (or even vaguely reasonable) increase in force wifi when I approach from the Express, but increase next to the extreme.

  Or should I put either the express until properly (I'm sure I'm) or I am fundamentally misunderstand the term "extend a wireless network. Alternatively, I bought 3 years 2 defective Express apart.

  Can anyone help?

  See you soon.

  You have a handy Mac laptop? If so, we can run tests to understand the current quality of the signal at each location where you want to have a Wi - Fi access. If all goes well, we can find better place to place your Express extension for your goals of networking.

• BIOS update failed: the process does not have this system. The process of the utility is not complete.

  I have a Thinkpad T450s and I'm trying to update the BIOS version 1.19 to 1.20. I've created a live usb with the 'el tortio' - image extracted using linux "dd". Once I boot on the USB under Legacy-BIOS and select upgrade, it proceeds witht the error message "the process does not have this system. The process has been cancelled. "I have disabled the protection against theft, AMT (I think this is the option) and I'm sure that I use the correct .iso file from the downloads section. I don't have a Windows operating system installed, but I'm able to start in various linux distributions using Legacy and UEFI methods.

  Here is my BIOS information.

  "Manage 0 x 0031, DMI type 0, 24 bytes.
  BIOS information
  Seller: LENOVO
  Version: JBET54WW (1.19)
  Release date: 06/11/2015
  Address: 0xE0000

  Runtime size: 128 kB
  ROM size: 16384 KB
  Features:
  PCI is supported
  PNP is supported
  BIOS is extensible
  BIOS shadowing is allowed
  Boot from CD is supported
  Selectable boot is supported
  ACPI is supported
  Legacy USB is supported
  BIOS boot specification is supported
  Targeted content distribution is supported
  UEFI is supported
  BIOS version: 1.19
  Firmware revision: 1.2 "

  What could you suggest to get the update disc to recognize my system?

  I think I've fixed the problem, I formatted FAT16 USB drive and not in FAT32 and also when you use the geteltorito command, it is preferable to use the-o option rather than a redirection ">"syntax. " An article said that it is best to drop in a DOS command line using the USB boot, then run dosflash.exe from there, however, I could not edit the .bat file, but it is an option however.

  I hope this helps someone stuck in a similar situation.

• I just got a new modem (Arris SB6190) and now my Airport Extreme does not connect.  It worked fine with the previous modem (a rented one TWC).  Help!

  I just got a new modem (Arris SB6190) and now my Airport Extreme does not connect.  It worked fine with the previous modem (a rented one TWC).  Help!

  Always recommended to reset the airport back to settings by default and then set up again whenever you have a new modem or change your Internet Service provider.

  Turn off the new modem for at least 30 minutes. More is better.

  Perform a hard reset on the AirPort Extreme, then it turned off.

  Make sure that the Ethernet cable connects the modem to the "O" on the AirPort Extreme WAN port

  After the power of the modem 30 minutes down, turn on the modem and let it run for at least 5 minutes by itself.

  Then, turn on the airport and let it run a few minutes

  Set up AirPort Extreme again

  Important note... There are many reports of problems with the modem Arris SB and airports. Both are great products, but they do seem to work perfectly together for some users.

• Fingerprint utility does not recognize the password website - Satellite U400

  Problems with the password Bank (TrueSuite Access Manager, 2.5.29.0 latest version;) Vista); Utility does not work, does not recognize the Web site password entry, doesn't react at all. Tried it in IE8 and Opera 10, tried to reinstall Truesuite Access Manager. The fingerprint login works fine, very well file protection works.

  Someone at - it the same problem? Any ideas on a solution?

  Thank you.

  Thanks for the comments.
  If you have questions try to find answer using the advanced search options.
  In this forum, you'll find helpful advice a lot or comments about so many different issues with Toshiba laptops.

• Portege M200: Rotation utility does not work with the new driver

  Hello

  I have a Portege M200 with the Gforce 5200Go. Since the last officially available graphics driver is the 46,44 I changed the 93.71 and installed. But the Rotation Utility does not work with this driver.

  When I use the driver nv for the rotation of the screen the tabletpen's is more synchronized: move the tabletpen left results in movement of the mouse to the top etc.

  Anyone any ideas?

  Hello

  You must use the page of the Toshiba driver graphics driver and not the original on the graphics card manufacturing site

• My AirPort Utility is not configure my Time Capsule

  Hello

  I just bought a Time Capsule and trying to set up, but it seems that my AirPort Utility is not set up. He continues to display an error message.

  Anyone have a similar experience and know the solution to this?

  What is the error?

  It can sometimes be a bit difficult.

  If you have an ipad or iphone... iPad is bigger is easier to work on...

  Download and use the version of iOS utility, because it is much more reliable than the Mac one.

  If you still have questions... Tell us available to the entire network.

• EOS utility does not start

  Running W7, EOS Utility does not start. Worked fine for a few months. Already had some problems with the Wi - Fi connection, which is corrected after unistalling and install again. Now it starts (after editing a W7?). Works fine in another computer running W7. Any suggestions?

  Thank you all. The problem was not an update to W7, but 2015 AVG antivirus. Windows restore feature has been blocked by the anti-virus. When the antivirus has been removed to allow the restoration of Windows to work probperly, EOS utility poped up and worked fine. Now, I have to stop antivirus when using EOS utility. I inform the AV manufacturer to find a solution.

  PS: With friendly assistance from support of AVG, I created a few exceptions (the files that are not checked by AVG) and included the EOS Utility in this list of exceptions. He now works OK!

• exp.exe System/pass@xe_345 does not have the name of the service as input

  Please suggest,
  
  
  can be used below command name service
  exp.exe System/pass@xe_345 does not have the name of the service as input
  
  What is the problem with the command below
  

  C:\oraclexe>exp.exe system/pass@XE file=hr.dmp log=hr.log consistent=y owner=hr
  
  Export: Release 10.2.0.1.0 - Production on Wed May 12 16:16:28 2010
  
  Copyright (c) 1982, 2005, Oracle.  All rights reserved.
  
  
  EXP-00056: ORACLE error 12541 encountered
  ORA-12541: TNS:no listener
  EXP-00000: Export terminated unsuccessfully
  
  C:\oraclexe>exp.exe system/pass file=hr.dmp log=hr.log consistent=y owner=hr
  
  Export: Release 10.2.0.1.0 - Production on Wed May 12 16:16:56 2010
  
  Copyright (c) 1982, 2005, Oracle.  All rights reserved.
  
  
  Connected to: Oracle Database 10g Express Edition Release 10.2.0.1.0 - Productio
  n
  Export done in AL32UTF8 character set and AL16UTF16 NCHAR character set
  
  About to export specified users ...
  . exporting pre-schema procedural objects and actions
  . exporting foreign function library names for user HR
  . exporting PUBLIC type synonyms
  . exporting private type synonyms
  . exporting object type definitions for user HR
  About to export HR's objects ...
  . exporting database links
  . exporting sequence numbers
  . exporting cluster definitions
  . about to export HR's tables via Conventional Path ...
  . . exporting table                      COUNTRIES         25 rows exported
  . . exporting table                    DEPARTMENTS         27 rows exported
  . . exporting table                      EMPLOYEES        107 rows exported
  . . exporting table                           JOBS         19 rows exported
  . . exporting table                    JOB_HISTORY         10 rows exported
  . . exporting table                      LOCATIONS         23 rows exported
  . . exporting table                        REGIONS          4 rows exported
  . exporting synonyms
  . exporting views
  . exporting stored procedures
  . exporting operators
  . exporting referential integrity constraints
  . exporting triggers
  . exporting indextypes
  . exporting bitmap, functional and extensible indexes
  . exporting posttables actions
  . exporting materialized views
  . exporting snapshot logs
  . exporting job queues
  . exporting refresh groups and children
  . exporting dimensions
  . exporting post-schema procedural objects and actions
  . exporting statistics
  Export terminated successfully without warnings.
  
  
  
  ^C
  C:\oraclexe>
  C:\oraclexe>
  C:\oraclexe>
  C:\oraclexe>
  C:\oraclexe>
  C:\oraclexe>exp.exe system/pass@xe_345 file=hr.dmp log=hr.log consistent=y owner
  =hr
  
  Export: Release 10.2.0.1.0 - Production on Wed May 12 16:18:27 2010
  
  Copyright (c) 1982, 2005, Oracle.  All rights reserved.
  
  
  EXP-00056: ORACLE error 12541 encountered
  ORA-12541: TNS:no listener
  EXP-00000: Export terminated unsuccessfully
  
  C:\oraclexe>lsnrctl status listener
  
  LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 12-MAY-2010 16:18
  :39
  
  Copyright (c) 1991, 2005, Oracle.  All rights reserved.
  
  Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
  STATUS of the LISTENER
  ------------------------
  Alias                     LISTENER
  Version                   TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Produ
  ction
  Start Date                06-MAY-2010 15:32:57
  Uptime                    6 days 0 hr. 45 min. 41 sec
  Trace Level               off
  Security                  ON: Local OS Authentication
  SNMP                      OFF
  Default Service           XE
  Listener Parameter File   C:\oraclexe\app\oracle\product\10.2.0\server\network\a
  dmin\listener.ora
  Listener Log File         C:\oraclexe\app\oracle\product\10.2.0\server\network\l
  og\listener.log
  Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC_FOR_XEipc)))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=suvarna)(PORT=1521)))
  Services Summary...
  Service "ORCL" has 2 instance(s).
    Instance "ORCL", status UNKNOWN, has 1 handler(s) for this service...
    Instance "orcl", status READY, has 1 handler(s) for this service...
  Service "PLSExtProc" has 1 instance(s).
    Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
  Service "XE" has 1 instance(s).
    Instance "XE", status UNKNOWN, has 1 handler(s) for this service...
  Service "orclXDB" has 1 instance(s).
    Instance "orcl", status READY, has 1 handler(s) for this service...
  Service "orcl_XPT" has 1 instance(s).
    Instance "orcl", status READY, has 1 handler(s) for this service...
  The command completed successfully
  
  C:\oraclexe>tnsping XE_345
  
  TNS Ping Utility for 32-bit Windows: Version 10.2.0.1.0 - Production on 12-MAY-2
  010 16:19:18
  
  Copyright (c) 1997, 2005, Oracle.  All rights reserved.
  
  Used parameter files:
  C:\OraHome_1\network\admin\sqlnet.ora
  
  
  Used TNSNAMES adapter to resolve the alias
  Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = suvarna)
  (PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = XE)))
  OK (30 msec)
  
  C:\oraclexe>exp.exe system/pass@xe_345 file=hr.dmp log=hr.log consistent=y owner
  =hr
  
  Export: Release 10.2.0.1.0 - Production on Wed May 12 16:19:37 2010
  
  Copyright (c) 1982, 2005, Oracle.  All rights reserved.
  
  
  EXP-00056: ORACLE error 12541 encountered
  ORA-12541: TNS:no listener
  EXP-00000: Export terminated unsuccessfully
  
  C:\oraclexe>

  Seems you have the strategy (profile) password for the user of the SYSTEM, but it cannot be reason of errors like ' no. LISTENER '

  Question:

  change the unlock SYSTEM user account;

  Published by: Teymur Hajiyev 12 May 2010 16:15

  adding text "BOLD"

• Disk utility does not see an external drive on my network

  I'm trying to reformat the external drive that I use for backup on Time Machine, but disk utility does not see it. She appears in the Finder as a shared drive. I use OS x 10.11.6. Thank you.

  Disk utility is not supposed to see the network drives.

  If it's a USB, connect it to your computer.

  If it's an Ethernet or wireless, using a utility specifically designed for this.

  (145027)