AirPrint not seeing HP wireless printers

Similar Questions

• My HP 8500 Wireless printer does not see my wireless network.

  Using my wireless HP8500 printer, I am unable to see my wireless network.  I recently bought a Linksys EA6500 router and this is when the change occurred.  I am Windows 7 64 bit on my laptop and desktop.  Does anyone have suggestions on what to do?  the printer is able to see other networks in the vicinity, but not mine.  My Network works fine with all my other devices.

  Thank you!

  I don't know what is happening here.  Cisco routers are usually pretty good at this stuff.

  That is, you can run Ethernet (Cat5) that should work and avoids all the problems wireless.  Your ipad/iphone will not worry how the printer is connected as long as the router can communicate with it.

  Once you connect the printer to the router with Ethernet, we will set an IP address of the printer:
  
  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). If you do not know the range, change the last set of numbers (those after the last '.') 250
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Enter the IP of your router (on the Page of the Network Config) for the gateway.
  -Enter for the first DNS 8.8.8.8 and 8.8.4.4 for second DNS. It's Google DNS. You can choose a different external DNS if you wish.
  -Click 'apply '.
  
  Now, stop the router and printer, start the router, wait, and then start printing.

• Computer laptop everything suddenly does not "see" my wireless router, use to work properly

  I have a HP laptop and it has implemented a wireless network a wireless d-Link N router.  Everything worked well for about 3 months.  Now, he can not connect.  Running the troubleshooting application to choose a connection - all my neighbors show up, but not that of my house.  The router is also new (he and laptop were Christmas gifts).   It used to work fine with Windows 7 one and now nothing...  I can't it appears in the list of wireless connections.
  My laptop 5 years running XP is in line with this router and it works fine - so I don't think that it is the router that is the problem.
  Thank you!

  Hello Bchek,

  Thank you for your message.  Check with your D-Link documentation and settings to make sure that the SSID broadcast has not been disabled.  This would prevent you from being able to see the wireless network.  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• VMware Player 5.0.2 does not see the wireless adapter

  Hello guys,.

  I'm having a problem with VMware Player 5.0.2 build-1031769 (the same exist with older versions of VMware Player 5 but it's the only one I currently have).

  The drive does not recognize my network card Intel Centrino Ultimate-N 6300 AGN wireless on a laptop Lenovo T410. I have an another T410 with Intel Centrino Ultimate-N 6200 AGN and it works fine.

  Here are the symptoms:

  -When using NAT networking it works fine

  -When I use open networking, the guest (in this case, Windows XP) operating system said that the cable is disconnected

  -J' found a few threads saying that this could be a router problem, but it's not because with the other computer laptop in the same network, everything works well

  -When I connect to the network using the work of connection LAN (cable) filled without problem

  -My Network on the host operating system works without any problem

  -Windows recognize the adapter wireless without any problem:

  

  -VMware Player does not display the adapter in the transition parameters but shows a kind of virtual map of Microsoft:

  

  -When I run the virtual network Editor is the same: no real but adapter Microsoft virtual card

  

  -J' tried to reset the default network configuration, but this did not help

  I am running Windows 8 Enterprise.

  I'd appreciate any help. Thank you.

  Have you looked in the host properties for the wireless NETWORK card see if the VMware Bridge Protocol client is installed?  If this isn't the case, add (the inf file must be in the folder that player is installed).

• I do not see any wireless (wifi) in network connection.

  Original title: I recently install windows xp on my dell D630 and now I don't have how to connect to the internet, however I don't see any connection (wifi) wireless networking connection.how it will work?

  connections WiFi had to install or? how I see the connections menu in the right side of the taskbar wireless?

  Go here and enter your service tag. Then download the drivers.

• "The center mouse & keyboard" do not see my wireless mouse / keyboard combo

  When I try to open 'the mouse and keyboard Centre' from the control panel or the Start Menu;.    I get the message "No Device Detected"...
  Unplug / plug the USB connector does not help...
  Reloading the drivers does not help...
  The troubleshooting online list doesn't have a link for this problem.

  The mouse and keyboard work (late question I was correcting after taking / disconnect and reload drivers (they were updated).)
  The control function still not open for me to make adjustments to the mouse.

  I investigated further and found that I received an update that does not work with my hardware... While this question the validity of the auto update process (why did I get this?)... The issue has been easily correctable by reinstalling the previous (correct) driver (s) used... So be it...
  D77

• Can not see the "wireless connection" option in the drop-down list in 'sharing' under the ics. Trying to establish an ad hoc connection.

  I'm trying to set up an ad-hoc connection between two laptops. I created a network. When I right click and select Properties. On the sharing tab, there is a check box for "allow other users to connect to this network. Below that, there is a drop down menu to "connecting home network." My problem is that I can't "wireless connection" under this sow drop andhence cannot establish a connection. Help, please! Using windows 7 64 bit home premium and have ralink 5390 adapter. I have internet through a wireless internet service provider. I use "Reliance Netconnect + wireless internet".

  Hi Amit,

  Please refer to this link and check if this helps you,

  Set up a computer-to-computer (ad hoc) network:

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-computer-to-computer-ad-hoc-network

• MAC user does not see the local printers to display the session

  I have a user of MAC OS x running on his MacBook Pro. It has the view more new version of the 3.0 client is installed and displays "printing enabled. It has an Epson printer installed through its LAN. On MAC it shows as "AirPrint. We tried to remove it and install the printer hard connected to the LAN and no change. What other issues could cause this? We reference this guide to print the view on MAC OSX.  In my view, that the agent on the virtual computer is 5.3. Any ideas on this one?

  http://www.VMware.com/PDF/horizon-view/horizon-view-client-Mac-document.PDF

  This problem has been fixed by moving users to a new virtual machine with latest 5.3 agent.

• Strangest thing: iPhones can't see the wireless network. Why not?

  Suddenly, an iPhone 5 and an iPhone 6 were not connected to the home network. I thought that the wireless router was to have a hiccup. Reset it and still no. Control a connected computer and internet. Thought that it was a wireless problem, but check the settings (I don't mess with) and they are fine. BUT, I realized my iPad is always connected to the network. IPhones don't even see the wireless network. SSID always broadcast on. I tried to enter the SSID and password manually, but iPhones say that the network does not exist. It's the strangest thing. What would make the invisible network for phones all of a sudden? Both phones are differnet OS running. One is the latest version, probably the previous version. It's a FiOS Actiontec router/router wireless. Everyone has heard of such a thing? I do not understand how it is possible...

  Try this on an iPhone. No matter which even with other iOS.

  Tap settings > general > reset > reset network settings

  You will need to enter the password for Wi - Fi.

• Satellite Pro P300-1AY does not see wireless networks

  I have a Satellite Pro P300-1AY and the unit does not see wireless networks.
  I replaced my card and it does not solve the issue.

  I set up another type of card and those who work well, it is only when I get an Intel 5100 (512AN_MMW) the unit does not see any network.

  I use win XP. Any idea?

  Hello

  You have the latest version of the BIOS?
  If this isn't the case, then you should first update the BIOS!

  The latest version of the BIOS is on the European driver Toshiba page and it can be modified running Windows OS.
  As far as I know, you must use 2.5 or later version BIOS.

  Check it!

• Satellite A30 does not see other devices in the wireless network

  I recently bought a Toshiba Wireless LAN Mini PCI Card, I installed and was able to recognize my broadband, but he does not see the other network devices. I have not provided with drivers or software for the operation of the card (I bought a decent retailer). Can you recommend me to downloads that would be this card?

  I have a laptop of Satelite A30 1 GB ram 60 GB HDD.

  Large files sometimes also stop transfer (crashes) when you use my USB connection. The usb controller uses the driver microsoft 5.1.2600.0 dated June 1, 2002.

  Is this a driver problem?

  Hello

  If the wireless network adapter is properly installed if you have not configured you.
  I put t know which devices in broadband services, you want to say but generally if you want to communicate or transfer files between laptops through the WiFi network so all the computers must be in the same domain or workgroup.

  I can't give you a correct answer, but only a suggestion. I have red that sometimes a lower potency could be responsible for this show. Try turning off the safe power option in the properties of the hub USB root in Device Manager.

  Hello

  If the wireless network adapter is properly installed if you have not configured you.
  I put t know which devices in broadband services, you want to say but generally if you want to communicate or transfer files between laptops through the computer WiFi network so all must be in the same domain or workgroup.

  I can't give you a correct answer, but only a suggestion. I have red that sometimes a lower potency could be responsible for this show. Try turning off the safe power option in the properties of the hub USB root in Device Manager.

• My Windows Vista computer does not see the network or printers that are connected to a computer using Windows XP

  before that norton was installed, it worked, but since Norton was installed AND DELETED, Vista will not see XP or its printers.

  I have checked the firewall and they took two computers, but still no luck.

  Hello

  Did you change your computer?

  This problem occurs if the (LLTD) link layer topology discovery Responder component is not installed on the Windows XP computer.

  Network card in Windows Vista makes network diagrams of connections between network devices that can be used to troubleshoot connectivity issues. Network map uses a discovery protocol called Link-Layer Topology LLTD (Discovery) that queries other devices on the network to determine how the network is organized.

  Windows Vista includes the software components that implement the LLTD protocol. For other devices on the network to display on the map, they must activate a discovery protocol that can meet the demands of mapping from the Windows Vista-based computer.

  I suggest you to install the update on windows XP.

  http://www.Microsoft.com/download/en/details.aspx?amp;amp;amp;displaylang=en&ID=5577

  This reference so

  http://TechNet.Microsoft.com/en-us/library/bb727037.aspx

• Received my brother in laws laptop cannot connect wireless, although I can of my own laptop. Trying to connect through the new laptop, I do not see even my own network.

  Received my brother in laws laptop cannot connect wireless, although I can of my own laptop. Trying to connect through the new laptop, I do not see even my own network! What I'm missing here? I'm sure it's maybe something simple, but for the life of me! (When my brother-in-law used this computer, he only uses it through dialup (!), he lives in a remote area). With the help of Vista, and when 'Management of connections' I see my network...

  original title: cannot connect wireless

  Hello

  ·         You get the error message?

  Method 1:

  I suggest you update the drivers for hardware connected to your computer on the Web site of the manufacturer check if it works.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 2:

  Also, follow the steps in troubleshooting section and check if that helps:

  In the Windows wireless network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wireless-network-connection-problems-in-Windows

  Check out these links and check if that helps

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-wireless-router

  http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-wireless-network

  See also:

  Solve problems with computers not appearing is not in the network map

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-computers-not-appearing-on-the-network-map

  Hope this helps

• I reset my router, now my two wireless printers will not print wireless.

  I reset my router and now none of my HP printers can print wireless.  They print with a USB key, but the installation program for the Wireless does not detect my wireless network.   I use an iMac and Airport extreme router.

  I have a different brand printer that works wirelessly now.  I don't understand why HP printers attached to the network.  Printers are c4780 and 4500.

  I tried your solution but still could not solve the problem.  I called HP support.  After a few minutes they determined that since it was an old printer and I recently updated my software on the computer and did a upgrade to the router, when I reset the router was not compatible with my printer.  They also suggested that I try with an old computer,.

  So, I ordered a HP OJ8600 at a great price and will move the printer on another computer.

  So Bravo are so your information, even if it was my fault for failing to provide more complete information, and given that the printer works somewhere else and I have a compatible printer on the way, I consider that this problem is solved.

  Thank you very much for your help.  I appreciate it.

• Can not see the external hard drive to my computer only in devices & Printers I tried many patches & need help please

  I do not see my external hard drive in my computer but I can't in my devices and printers.  I too see the drive in disk management.  There is a lot of data on my hard drive that I need to save. It says that I have to initialize so the computer sees the drive but it clears my data. How to recover data? The drive works and makes no noise. Help, please. I uninstalled the RPG player

  and reinstalled. I've also updated the driver and I still don't see the drive in my computer.

  Hello

  Welcome to the Microsoft community.

  I understand that you have a problem with finding printers and external hard drives in the computer. We apologize for the unhandiness caused to you and appreciate your efforts in trying to solve the problem.

  To help you better I would like to know the details.

  1. What is the brand and model of the computer?
  2. You did changes to the computer before the show?
  3. Have you tried to connect the same external hard drive on another computer?

  I ask you to run the hardware and devices Troubleshooter and check if the problem persists. It is an automated tool that checks the hardware attached to the computer for known problems and provides details on how to correct them.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  I ask you to install optional Windows, including updates updates and check if you are facing the issue.

  Reference http://answers.microsoft.com/en-us/insider/wiki/insider_wintp-insider_devices/how-to-install-and-update-drivers-in-windows-10/a97bbbd1-9973-4d66-9a5b-291300006293

  Keep us updated on the issue to help you better.