AirPrint works only not on HP ENVY5540
Hi I just bought a new printer that has AirPrint, but I can't get our mobile devices (iPad 2 of 2) to find all printers air.
Our office is an iMac, the printer is in another room what USB connected to an Airport Extreme on our ethernet network. Airport Extreme is off with wireless bridge mode. I wonder if the Airport Extreme, perhaps causing the problem?
Any suggestions appreciated
Apple is very serious about the Air in AirPrint. Air Printing requires that the printer must connect to the network via a Wireless ... connection not USB.
If you don't want to configure your printer to connect wirelessly, you will not be able to print from any type of device iOS... iPhone, iPad, iPod... unless... you add additional software of 3rd as Printopia that pourrait allow iOS devices to print via a connection of USB printer. More info here:
We have a HP Color Laserjet M252DW in our business that we intend to use Airprint for printing from our Mac machines, but we cannot make it work.
We use a Cisco wireless with a 2500 WLC. We have configured mDNS and are able to see other printers, but not the M232DW.
What we have tried so far:
> Search for the firmware updated (not available)
> Reset the printer and reconfigure
> Use the static and DHCP IP addresses
> Restart the printer, WLC and Mac devices
The printer is connected to the same network wireless as users. As I said, Airprint works on other printers, it works just not on this one.
Any ideas of what I may be missing or what I can try?
I got to work. But only after I reset the default printer and it reconfigured.
I needed to configure mDNS on Cisco WLC, then after I reset and reconfigure the printer, it took a little time to see the recording on the WLC and for Apple devices pick up (about 5-10 minutes).
It took that long only for this particular model because the other HP printers have been detected immediately, but those are wired, however.
To accomplish the same thing for devices Meraki see the following link.
Let us know if that helps. Just know you may need to reset your default printer, reconfigure, then wait a while.
Messenger Service, or the Net send command not working only not on the remote computer, despite the messenger service is started "it works only if I restart the service.
operating system is windows xp
service pack 3
Have you done a recent software or hardware changes to the system?
This problem occurs because the Messenger service is disabled. The Messenger service must run on the destination computer to activate the NET SEND command.
Because the service is already started, and you must restart the service, you can try to stop the service, change the startup type to automatic and start the service. Check if it helps.
Please refer to the article to define the service as automatic:
For more information, see the article:
Hope the helps of information.
Let us know if you need help with Windows related issues. We will be happy to help you.
I have a laptop HP V6500 Pressario, with Vista Home Basic installed recently. I have two problems with my laptop:
1 > there is no sound, and I see the error "no audio device is installed" with a red cross on the "speaker" icon.
2 > drive CD/DVD is not visible in 'my computer '.
These two problems are persistent, but begin to work from time to time, say once 20 times when I turn on the laptop, I see the CD drive and also audio works, but these work only for about 10 minutes...
I tried the Dr.Fixit and it did not help and have also installed the latest drivers for my notebook to the hp site:
Any help to solve these problems is much appreciated... Thanks in advanceHey riri,.Try these steps and check the result.
Step 1: Delete the invalid registry keys
1. Click Start, type regedit and press to enter. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
2. in the navigation pane, find and then click the following registry subkey:
3. in the right pane, click UpperFilters.
Note: You may also see an UpperFilters.bak registry entry. You don't have to delete this entry. Click UpperFilters. If you do not see the UpperFilters registry entry, you may still have to delete the LowerFilters registry entry. To do this, go to step 6.
4. in the Edit menu, click on delete.
5. When you are prompted to confirm the deletion, click Yes.
6. in the right pane, click LowerFilters.
Note: If you do not see the LowerFilters registry entry, unfortunately this content cannot help you further.
7. on the Edit menu, click on delete.
8. When you are prompted to confirm the deletion, click Yes.
9. exit the registry editor.
10. restart the computer.Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: see How to back up and restore the registry in WindowsStep 2: Uninstall any software CD/DVD burning.
1. Click Start, type appwiz.cpl and press to enter.
2. from the list of programs, select CD/DVD burning software and click on uninstall.
3. once the uninstall, restart the computer.Step 3: Install device drivers in a new user account.1. open user accounts by clicking the Start button, clicking Control Panel, click user accounts and family safety (or by clicking on user accounts, if you are connected to a network domain), and then clicking user accounts.
2. click on manage another account. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
3. click on create a new account.
4. type the name you want to assign to the user account, click an account type, and then click on create an account.I hope this helps.Kind regards
Syed - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
I use jdeveloper 12 c on windows internet explore.
I'm at the following link
It works only if I insert new records. After the update, it does not work. He leaves me no update.
How to work around it please?
User, tell us your exact jdev version, please!
It works if yo udefine the unique key in the DB?
I've been looking around in the forums, but I couldn't find solutions to my problem.
I have a satellite A130 and I am running a windows VISTA family Basic. I have a problem with my fn functions.
I can only use flash on the top of my screen cards, just by dragging my mouse upwards on the top of my screen.
The key works only when I start my computer, at startup, but when the computer is running, there is no other "fn", I could use but my mouse to show my flash cards and use them.
Is there something else I could do?
I have same situation, remove the starting windows for the form Flash cards and you have no pictures at the top of the desctop, but keys will work.
Since the update to the latest version of the CC a few days ago, my shortcut to toggle mode screen (F) does not at all. I tried to reset my preferences and I checked my preferences of shortcuts - but nothing seems to fix the problem.
Well, I finally got it working - but not quite how. A combination to reset the preferences, parameters of deleting and re-installing Photoshop. Although I had to reinstall twice before, it made a difference.
In any case, fixed now fortunately! I appreciate the help.
The site is http://www/tuckermarcom.com/blog .
Someone with experience with links not working do not in your blog Business Catalyst, specifically in a mobile view? I have a responsive model that uses the blog module, but for some unknown reason, the links inline in the blog simply do not work (not type) while in the mobile display (like an iPhone). The blog titles, link to it is the landing page and system of links work well - it is the I added links that seem to have the question. Any help would be greatly appreciated! Thank you
The hotfix allows the pop up in the General settings of the iPhone. Minor correction - great results.
The iMac does not recognize the SD card when inserted. Nothing in the Finder. If I leave the card in the slot and restart the iMac, it is recognized. This all started after the upgrade to El Capitan. Anyone?
Please ask for help in the communities of Support from Apple. Looks like you have problems reading from an SD card with your iMac. Here are the things I would check.
The first thing that you want to make sure that the data on your Mac is safe. You will need to use Time Machine to backup to an external hard drive. The recommendation is to use an external hard drive twice the size of your hard drive internal. Use this article to help make a backup: use Time Machine to back up or restore your Mac.
Then, you need to determine what you want to open or to display when you enter the SD card in. If you are looking for pictures to open when you insert the SD card, when you enter the SD card, open the Photos. On the import tab, there is a checkbox "Open pictures for this device". Make sure it is checked. If it is checked, uncheck it and re-check. It is necessary sometimes to get these settings reset.
If you are looking for only to have a pop up on the desktop image, please go to the Finder, then click the word Finder in the next to the Apple menu bar. Click on Preferences. Make sure that you check the tab general, and that the box for the external drives. If it is checked, uncheck it and re-check. Close the Finder preferences.
If you are still not able to find the SD card on the desktop or in the Photos, you will want to check if it shows up in disk utility. You can check by opening Finder > Applications > utilities > disk utility. Make sure the SD card is showing correctly in disk utility without having to restart the Mac.
If you still have the problem, with the insertion of the card and read by the Mac, look for more updates. There may be a new update driver or firmware required to get this working correctly with the new operating system. Use the App Store, updates, or contact the manufacturer of the SD card to see if they can provide updated information.
Thanks again and have a great rest of your day.
I mainly used a USB mouse with my M3 lately but went to use the touchpad, the other day and found the scrolling features (i.e. the right and at the bottom of the pad, used to scroll the active window) worked no longer. In the window options of two points, the functions are enabled. I tried altering the functions of the pad, but each time, the new settings have not been applied and next time, I opened the window settings, they were restored to their previous state.
Any help would be appreciated!
I have Tecra M1 and there is the same as on your M3 Touchpad setting. I really don't understand how this can happen. I also use an external USB wireless mouse, but everything works fine. The only thing I noticed is that this feature is possible if the cursor is inside the window where you want to use this feature.
I'm writing to a friend... None of us is particularly in computer science.
Recently, his computer had to be replaced; so, she bought a used HP Pavilion Slimline, 400-034 PC with Windows 8 OS (not sure that all the operating system to 64-bit... just guessing). The PC seems to work very well; However, with its previous system she used a printer (HP 7410 All in One) and a webcam (HP-HD-HD3110 & HD 3100). She can't get either auxiliary to work devices. Can anyone tell me if these components are compatible and that, if so, wherever it can access drivers or other software that may be required.
Also, would you recommend that she has first upgrade to Windows 10?
A Windows 8 driver must be installed to use the printer on the new PC.
You can either upgrade to Windows 10 or not, the printer is compatible with both operating systems and it is a matter of personal preference...
For 7410 printers, drivers can be downloaded from the following link:
Note: If the printer is connected to a USB port, unpulg the cable from your PC now.
In the devices Panel and printers and select remove device for the icon of the printer before installing the software.
Regarding the HP Webcam, I'm afraid that it's incompatible with Windwos 8.1 or Windows 10, it is only supported on Widnows 7 or earlier operating systems:
You try to install the drivers for Windows 7 by using Compatibility Mode (download the file to your computer, right click and select Troubleshoot Compatibility and then follow the steps on the screen) but it has never tested on Windows 8 or 10 and if it works not you replace the webcam with a model more late which is compatible with the operating system.
my remote was working initially. now it does not work in Qosmioplayer or WinMCE mode. The red light in the receiver when you press the remote control in order to do not a dead battery! any suggestions as to what was popular up
Have you installed any other tools or utilities, or have you changed a few settings?
As far as I know you need the infrared receiver only to control the MCE Win.
The receiver is plugged into the USB port. Please check in Device Manager if the receiver is recognized. Also, check the cable of the infrared transmitter is also related.
However, if you are working with the Qosmio player receiver should be removed from the unit.
Moreover, in the user manual, you can find useful information about the remote control
I have problem with my multimedia keys. They don't work after installing WXP and all drivers. Only key work is WWW browser. I wanted to put DVD/CD key to start winamp, but it is impossible. I can put this control controls and panel\Toshiba, but it still doesn't work. Also in the case of default CD/DVD settings key does nothing.
I tried also to play, stop, next and prev keys in winamp hotkeys (options\preferences\global hotkeys winamp), but I can put only 1 key. When I am pressing the play button in the shortcut field keyboard winamp, it says "0 x 1770001", but after I save it turns into '0 x 1000000 '. Also when I am pressing the Stop button, it says 'E', and after save it also evolves into '0 x 1000000 '. And analog: prev button - '0 x 1740001', by pressing the next key - ""(only space), but after save this settings it also evolves into '0 x 1000000'. "."
So only the first shortcut key works - for all the multimedia keys. Can you give me some tips to solve this problem?
PS. [Sorry for my English:]
All the multimedia keys are designed to work with Microsoft Media Player and not for use with other media players. Install a few plugins for Winamp. Please see this section on Winamp on Toshiba laptops.
I have a Pavilion DM4-3050US laptop. The brightness keys don't work at all. All the other function keys work fine, like F9 and F10 to volume. I looked long and seriously and tried almost all of the solutions that I found, which it which seemed so promising: http://h30434.www3.hp.com/t5/Notebook-Display-and-Video/Brightness-Controls-Stopped-Working-dm4/m-p/.... Nothing works, however. I won't do a factory reset - no need to reinstall all the software for the brightness. I also called HP and they offered replace the laptop, but still once, does not only apply to worsening brightness keys. Does anyone have any ideas or suggestions? It must be some sort of bug that HP is aware, no?
Then work my F2 and F3 keys. They began to apply when I have connected a Microsoft Comfort Curve keyboard to my laptop. This prompted Win 7/MS update find software for the keyboard that I downloaded and installed. After the reboot, I discovered that the F2 and F3 keys now dim and brighten up the screen. I know that this will not work for others, it seems to be related to the installation of the keyboard software, but he has restored somehow keyboard settings that work even if I'm not using the external keyboard.
OK, I've had something similar with previous Smartwatch (MN2), but I had hopes to go with SW2.
LG Swift L9 is 4.1 (JBean). SW2 is *. B.0.25 (ALREADY updated with the latest, via a soft PC/cable and Sony Update Service).
So here's how it is:
-J' managed to pair with me LG9.
-demand for Smart Connect (on the idle screen) so I install it from the game.
-by opening Smart Connect on the phone, asking questions about SW2 app, once again - I install it from the game.
-then what happens, is that I get the white rectangle on a gray background on the screen of smartwatch and SHE.
-the only thing to recover/restart of the process is to reset the watch, try to pair again, that works, but immediately after, if I'm only smartconnect - I get the white rectangle on a gray background.
Any ideas? Suggestions?
My Sony - its advertised to work with 4 + smartphones Android, LG Swift L9 is such a smartphone. If it turns out to be a blocker - I'm going to Pebble (assuming that if he only works with LG L9)- AND WILL NEVER LOOK BACK.
I wanted to stick with Sony, because I am a dev, and Sony seems to provide more structured SDK/API for this product by comparing to other smartwatches (with relatively pleasant store Play integration). But * beep *, know all this im lose confidence... (and patience).
PS Yes - I called Sony support UK already, but they seem clueless. It seems that these guys here never had the SW2 in their hands.
OK, looks like I solved my problem, then post it here - if someone comes barely similar.
I took my SW2 to a colleague with another motive than mine (I think it's Samsung Galaxy something SII, also with Android 4 +). Then we paired up, and then, surprisingly - SW2 downloaded a SW update, got the upgrade to this 1.0. * slash 1.0. * version and the work began with his phone. Then we odd he reset the SW2 and paired with my phone - and it worked!
Was apparently the version of SW2, I had initially was veeeeery old, old enough that didn't connect my LG L9 and old enough that my LG L9 might not even be updated. Once we have passed this point - everyhing works fine (at least for the last 5-6 hours).
Problem solved then.
Maybe you are looking for
Creation of an intranet to a collection of security videos and am linking to a video through a picture icon in the form of:< a href = "K: \'link to the movie" > "" < /a > Overview on the works of IE9, the movie starts when the splash screen is clicke
HP Solution Center is installed on the client computer. Customer a fax PC installation, functionality, it receives faxes on computer. However, if the customer has a document on the computer which it wishes to send it by fax, is it possible? Please no
I have toshiba satellite p870 core i7 laptop and the bios password IM need bios jumper or or are planning to open the device This Drop modil > 6050a 2492401 gl10fg Please help me [email protected]
computer automatically starts in safe mode without prompting, a problem with your computer can prevent Windows to start normally
The other day, I registered my printer ePrint service. I took my own address of e-mail (like [email protected]). Then I had some problems with my printer, after which its configuration has been reset. When I restored my setup and open the ePrint Cente