AIX not sendmail

Hello

I have mail in AIX problem. I can not send an email to user Oracle but can send messages to root level, sucesssful. E-mail send user either oracle eventually dead.letter, expert pleae help. Thank you.

Check your configuration file "sendmail.cf.

Contact your Internet service provider (or visit their website "support"),

to find the ID of their 'SMTP' mail server, for example, something like "smtp.verizon.co".

Insert this value.

Starting a command line prompt, type something like "nslookup smtp.verizon.co."

ensure that your AIX system can contact a DNS server

to translate this name to a valid IP address.

If it cannot, then you must check your DNS-server configuration and update this configuration file.

Tags: HP Desktops

Similar Questions

  • Error FRM-41839

    Hi all
    I start to receive "FRM-41839: disk i/o on the disk error temporary buffer file /tmp/filebfKMCw.TMP.
    When I hit OK, I get "ORA-01403 no data found ' and ' FRM-40507: Oracle error: cannot get next request record.»

    He's filebfKMCw.TMP $
    -rw - r - r - 1 applprd s/n 536177 Jul 21 14:01 filebfKMCw.TMP

    Is it a space in the directory/tmp?

    Thank you
    Eugene

    Hello

    See (Note: sendmail 737897.1 - how to remove Messages from queue) for steps clean this directory, or just add more space (move the directory some other partitions with enough space).

    Kind regards
    Hussein

  • When installing Oracle BI 12 c on AIX is xmalloc of error: could not allocate 2112164888 bytes (0 bytes allocated)

    Dear all

    I was asked to install Oracle BI server on an AIX 6.1 Server 12 c old we have.

    I have JAVA SDK 7 which is supposed to be certified with both weblogic and BI 12 c

    I have installed weblogic with no problems, but when you call BI installation I get this error

    xmalloc: could not allocate 2112164888 bytes (0 bytes allocated)

    I tried to adjust/etc/security/limits

    $ ulimit - a

    Time (seconds) unlimited

    leader (Blocks) unlimited

    Data (KBytes) unlimited

    Stack (KBytes) 196608

    Memory (KBytes) unlimited

    coredump (Blocks) unlimited

    nofiles (descriptors) 65536

    threads (per process) unlimited

    process (per user) unlimited

    I don't know if this is related but I thought that it might help, but it didn't

    I have enough memory on the server, so what else could be wrong?

    Thank you all

    He is certified according to

    http://www.Oracle.com/technetwork/middleware/Fusion-Middleware/documentation/FMW-1212certmatrix-1970069.xls

    in any case, I found the solution, I don't even believe that such a thing has stopped me for a long time

    I only had to run the command from the same directory where the bin file!
    I used to run it like this

    . // bi_platform - 12.2.1.0.0_aix_ppc64.bin

    I should go the location first, then executez./bi_platform-12.2.1.0.0_aix_ppc64.bin

    Thanks to you all

  • Coherence does not not on AIX

    Hello

    Installed the consistency, even the new 3.7.1.6 full distribution. but when he started, she raised an exception on socket:

    bash - 3.2 #./coherence.sh
    . / coherence.sh [11]: pushd: not found.
    . / coherence.sh [15]: popd: not found.
    * From storage off the console *.
    version Java "1.6.0".
    Java (TM) SE Runtime Environment (build pap6460sr10fp1-20120321_01(SR10 FP1))
    IBM J9 VM (version 2.4, JRE 1.6.0 IBM J9 2.4 AIX ppc64-64 jvmap6460sr10fp1-20120202_101568 (active JIT, active AOA))
    J9VM - 20120202_101568
    JIT - r9_20111107_21307ifx1
    GC - 20120202_AA)
    JCL - 20120320_01

    02-05-2013 Oracle coherence 3.7.1.0 15:39:29.755/1.990 < Info > (thread = main Member, = n/a): responsible operational configuration of "jar:file:/u02/app/oracle/coherence_3.7.1/coherence/lib/coherence.jar!/tangosol-coherence.xml".
    02-05-2013 Oracle coherence 3.7.1.0 15:39:29.948/2.182 < Info > (thread = main Member, = n/a): responsible for operational substitutions of "jar:file:/u02/app/oracle/coherence_3.7.1/coherence/lib/coherence.jar!/tangosol-coherence-override-dev.xml".
    02-05-2013 Oracle coherence 3.7.1.0 15:39:29.950/2.184 < D5 > (thread = main Member, = n/a): configuration optional override ' / tangosol-coherence - override.xml ' is not specified
    02-05-2013 Oracle coherence 3.7.1.0 15:39:29.974/2.208 < D5 > (thread = main Member, = n/a): configuration optional override "/ custom - mbeans.xml ' is not specified

    Oracle Version 3.7.1.0 Build 27797 consistency
    Grid edition: development Mode
    Copyright (c) 2000, 2011, Oracle and/or its affiliates. All rights reserved.

    02-05-2013 Oracle coherence GE 3.7.1.0 15:39:31.987/4.221 < WARNING > (thread = main Member, = n/a): PreferredUnicastUdpSocket failed to set receive the buffer size of the packets of 1444 (1.99 MB); actual size is 42%, 609 packages (863KB). Consult the documentation of your operating system with regard to the increase in the size of memory buffer maximum taken. Proceed to the actual value can cause suboptimal performance.
    02-05-2013 Oracle coherence GE 3.7.1.0 15:39:31.987/4.221 < D4 > (thread = main Member, = n/a): TCMP linked to /192.168.1.74:8088 using SystemSocketProvider
    02-05-2013 Oracle coherence GE 3.7.1.0 15:39:31.991/4.225 < error > (thread = main Member, = n/a): error starting to cluster: java.net.SocketException (Wrapped): the name of the socket is not available on this system.
    at com.tangosol.util.Base.ensureRuntimeException(Base.java:288)
    at com.tangosol.util.Base.ensureRuntimeException(Base.java:269)
    at com.tangosol.coherence.component.net.Cluster.onStart(Cluster.CDB:40)
    at com.tangosol.coherence.component.net.Cluster.start(Cluster.CDB:11)
    at com.tangosol.coherence.component.util.SafeCluster.startCluster(SafeCluster.CDB:3)
    at com.tangosol.coherence.component.util.SafeCluster.restartCluster(SafeCluster.CDB:10)
    at com.tangosol.coherence.component.util.SafeCluster.ensureRunningCluster(SafeCluster.CDB:26)
    at com.tangosol.coherence.component.util.SafeCluster.start(SafeCluster.CDB:2)
    at com.tangosol.net.CacheFactory.ensureCluster(CacheFactory.java:427)
    at com.tangosol.coherence.component.application.console.Coherence.run(Coherence.CDB:25)
    at com.tangosol.coherence.component.application.console.Coherence.main(Coherence.CDB:3)
    at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:48)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:600)
    at com.tangosol.net.CacheFactory.main(CacheFactory.java:827)
    Caused by: java.net.SocketException: the name of the socket is not available on this system.
    at java.net.PlainDatagramSocketImpl.socketSetOption (Native Method)
    at java.net.PlainDatagramSocketImpl.setOption(PlainDatagramSocketImpl.java:408)
    at java.net.MulticastSocket.setInterface(MulticastSocket.java:424)
    at com.tangosol.coherence.component.net.socket.udpSocket.MulticastUdpSocket.instantiateDatagramSocket(MulticastUdpSocket.CDB:33)
    at com.tangosol.coherence.component.net.socket.UdpSocket.open(UdpSocket.CDB:12)
    to com.tangosol.coherence.component.net.Cluster$ SocketManager.bindSockets (Cluster.CDB:129)
    at com.tangosol.coherence.component.net.Cluster.onStart(Cluster.CDB:36)
    ... 13 more

    Exception in thread "main" java.lang.reflect.InvocationTargetException
    at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:48)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:600)
    at com.tangosol.net.CacheFactory.main(CacheFactory.java:827)
    Caused by: java.net.SocketException (Wrapped): the name of the socket is not available on this system.
    at com.tangosol.util.Base.ensureRuntimeException(Base.java:288)
    at com.tangosol.util.Base.ensureRuntimeException(Base.java:269)
    at com.tangosol.coherence.component.net.Cluster.onStart(Cluster.CDB:40)
    at com.tangosol.coherence.component.net.Cluster.start(Cluster.CDB:11)
    at com.tangosol.coherence.component.util.SafeCluster.startCluster(SafeCluster.CDB:3)
    at com.tangosol.coherence.component.util.SafeCluster.restartCluster(SafeCluster.CDB:10)
    at com.tangosol.coherence.component.util.SafeCluster.ensureRunningCluster(SafeCluster.CDB:26)
    at com.tangosol.coherence.component.util.SafeCluster.start(SafeCluster.CDB:2)
    at com.tangosol.net.CacheFactory.ensureCluster(CacheFactory.java:427)
    at com.tangosol.coherence.component.application.console.Coherence.run(Coherence.CDB:25)
    at com.tangosol.coherence.component.application.console.Coherence.main(Coherence.CDB:3)
    ... 5 more
    Caused by: java.net.SocketException: the name of the socket is not available on this system.
    at java.net.PlainDatagramSocketImpl.socketSetOption (Native Method)
    at java.net.PlainDatagramSocketImpl.setOption(PlainDatagramSocketImpl.java:408)
    at java.net.MulticastSocket.setInterface(MulticastSocket.java:424)
    at com.tangosol.coherence.component.net.socket.udpSocket.MulticastUdpSocket.instantiateDatagramSocket(MulticastUdpSocket.CDB:33)
    at com.tangosol.coherence.component.net.socket.UdpSocket.open(UdpSocket.CDB:12)
    to com.tangosol.coherence.component.net.Cluster$ SocketManager.bindSockets (Cluster.CDB:129)
    at com.tangosol.coherence.component.net.Cluster.onStart(Cluster.CDB:36)
    ... 13 more


    Any help?

    K.

    Hello

    Since your original post, it looks like you use the script coherence.sh file to set the properties of the JAVA virtual machine, you need to modify this script. More specifically, to the bottom of this file, you will see a line like this...

    JAVA_OPTS="-Xms$MEMORY -Xmx$MEMORY -Dtangosol.coherence.distributed.localstorage=$STORAGE_ENABLED $JMXPROPERTIES"

    .. .you must change this line to read...

    JAVA_OPTS="-Djava.net.preferIPv4Stack=true -Xms$MEMORY -Xmx$MEMORY -Dtangosol.coherence.distributed.localstorage=$STORAGE_ENABLED $JMXPROPERTIES"

    JK

  • User not DBA trying to access the binary sqlplus: AIX

    DB version: 11.2
    Operating system: Aix 6

    I created a user level oracle DB called testusr and I created the unix user called testusr as well.
    But when I try to run sqlplus, I get the following error.
    su - testusr
$ whoami
testusr
$ id
uid=1690170420(testusr) gid=206(svgrp)

export ORACLE_HOME=/u01/oracle/11.2/db
export ORACLE_SID=orcl
export PATH=$PATH:$ORACLE_HOME/bin
export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:$ORACLE_HOME/lib

$ sqlplus /
ksh: sqlplus:  not found

$ ls -alrt /u01/oracle/11.2/db/bin/sqlplus
/u01/oracle/11.2/db/bin/sqlplus: No permission   #This file actually exists
    This is the setting of the ACL for /u01/oracle/11.2/db directory ORACLE_HOME. testusr belongs to the Group of svgrp that has
    been granted read and execute privileges.
    cat /tmp/acl_settings_for_OH11.2
*
* ACL_type   AIXC
*
attributes: 
base permissions
    owner(oracle):  rwx
    group(dba)   :  r-x
    others       :  ---
extended permissions
    enabled
    permit   r-x     u:manh
    permit   r-x     g:kevh
    permit   r-x     g:svgrp
    No idea why the testusr can not see sqlplus binary?

    You need to check the permissions for each of the components of the path: /u01/oracle/11.2/db/bin/sqlplus

    Thus, each directory path
    / U01/oracle /.
    /U01/Oracle/11.2/
    /U01/Oracle/11.2/DB/
    /U01/Oracle/11.2/DB/bin/

    must have read and execute permissions (but NOT write permissions)

    And, of course, the sqlplus binary must have read and execute permissions.

    Hemant K Collette

  • The CSSD does not start automatically on the Non-RAC - AIX 5 L

    Hi all

    Database: Oracle 10.2.0.4
    AIX 5.3 TL 10 OS

    I am facing a problem with the Non-RAC/Clusterware CSSD.

    When we restarted the CSSD service server does not start automatically, and there is no relevant messages in the log files of the CSSD.

    Run 'localconfig reset $ORACLE_HOME', to run but does not start the CSSD.

    Running 'start /etc/init.cssd' - does not work, nothing happens when you throw

    I manually ran "file/etc / init.cssd to run" and the start of the CSSD (ossd.bin) service without errors.

    No error on errpt in AIX.

    I opened a SR, but I'm waiting for response from the Oracle.

    Hello

    I think that this problem is not with Oracle, but in AIX.

    It may be that a process that starts at the start is the other process. You need to identify what application/process.

    Check the process in inittab who are already active and which are inactive, they must be active.

    A clue: is very common process that is launched in standby mode keep the boot server.

    wait
When the init command enters the run level that matches the entry's run level,
start the process and wait for its termination.
All subsequent reads of the /etc/inittab file while the init
command is in the same run level will cause the init command to ignore this entry.

    http://publib.Boulder.IBM.com/InfoCenter/AIX/V6R1/index.jsp?topic=/com.IBM.AIX.files/doc/aixfiles/inittab.htm

    Kind regards
    Levi Pereira

  • INDEX_FFS trick works not - why 11.2.0.1 on AIX

    Hello

    I try to run

    Select / * + INDEX_FFS (t index_name) * / *.
    from table_name t

    Index in question is local bitmap index on a partitioned table.

    Abnother query have done us a full scan against the table in question.

    Considering that a full scan can be quciker - wanted to at least try but when watching explian plan does not show with her.

    Can use
    Select / * + INDEX (index_name t) * / *.
    from table_name t

    and full bitmap index analysis.

    I would like to make fasft complete analysis to see if it is faster.


    Thank you very much

    Full Fast scan to avoid going to the table with a full table scan if the index contains all the columns needed.
    It's probably not the case with a bitmap index.

    Refer to the documentation [url http://docs.oracle.com/cd/E11882_01/server.112/e25789/indexiot.htm#sthref320]

  • Is there a group who is to wear the firefox, thunderbird or seamonkey for IBM AIX(5.3, 6.1 and/or 7.1)?

    Just try to find a more recent version of firefox, thunderbird and seamonkey for my
    IBM AIX (5.3 and 7.1) systems.
    I was wondering if anyone in this forum knows of someone trying a port of the
    latest version of AIX. (I use firefox 3.6.28, 3.1.20 Thunderbird and seamonkey 1.1.18)
    I really must update these products. Impossible to have full access to many sites.
    Would appreciate the help locating a never version running on my system.

    dkcchayek wrote:

    If I wanted to give it a try; how do I locate the full source tree for the Linux version of firefox, mozilla and seamonkey?

    I guess you mean not Mozilla Thunderbird. Mozilla Application Suite is a much older than Firefox 3.6.28 discontinuous product (the latest version is dated April 21, 2006).

    You can find references to the VisualAge C++ compiler which is normally necessary to build. IBM has rebranded this product to XL C/C++.

    dkcchayek wrote:

    Thanks for the input!

    We invite you for what I could provide little help.

  • OSX Server Postfix does not start - help!

    Hi all

    I inherited a 10.7.5 os x server.

    He currently acts as a mail (IMAP) server.

    When I click on start mail - it stops just again.

    Clients use the imap Protocol to send or receive mail, they had on another account. The used imap server as a storage of archives.

    Everything was working fine but suddenly stopped, messaging service. I tried to make it work again, but currently I'm quickly anywhere.

    I think it's a permissions problem, the outputs are below.

    The server is Let's say also that the certificate has expired, it would also prevent workstation (as a service)?

    This server is about to be killed, all I want to do is connect to the imap folders and export data!

    Thanks for any help

    Server: ~ serveradmin$ sudo postfix check

    Postfix/postfix-script: WARNING: group or other write: / Library/Server/Mail/Data/mta

    Server: ~ serveradmin$ sudo postfix set-permissions

    Server: ~ serveradmin$ sudo usr/libexec/postfix/post-installer updated-permissions/usr/libexec/postfix/post-install: error: / postfix-files is not a file.

    Server: ~ serveradmin$ sudo usr/libexec/postfix/post-installe data_directory = / Library / / Mail/data/mta server upgrade-permissions

    / usr/libexec/postfix/post-install: error: / postfix-files is not a file.

    Server: ~ serveradmin$ sudo serveradmin fullstatus mail

    mail: setStateVersion = 1

    mail: readWriteSettingsVersion = 1

    mail: cluster = _empty_dictionary

    mail: servicePortsRestrictionInfo = _empty_array

    mail: protocolsArray:_array_index:0:status = 'ON '.

    mail: protocolsArray:_array_index:0:kind = "INCOMING".

    mail: protocolsArray:_array_index:0:protocol = "IMAP".

    email: protocolsArray:_array_index:0: state = 'STOPPED '.

    mail: protocolsArray:_array_index:0:error = «»

    mail: protocolsArray:_array_index:1:status = "OFF".

    mail: protocolsArray:_array_index:1:kind = "INCOMING".

    mail: protocolsArray:_array_index:1:protocol = 'POP3 '.

    email: protocolsArray:_array_index:1: state = 'STOPPED '.

    mail: protocolsArray:_array_index:1:error = «»

    mail: protocolsArray:_array_index:2:status = 'ON '.

    mail: protocolsArray:_array_index:2:kind = "INCOMING".

    mail: protocolsArray:_array_index:2:protocol = "SMTP".

    email: protocolsArray:_array_index:2: state = 'STOPPED '.

    mail: protocolsArray:_array_index:2:error = «»

    mail: protocolsArray:_array_index:3:status = 'ON '.

    mail: protocolsArray:_array_index:3:kind = "OUTGOING".

    mail: protocolsArray:_array_index:3:protocol = "SMTP".

    email: protocolsArray:_array_index:3: state = 'STOPPED '.

    mail: protocolsArray:_array_index:3:error = «»

    mail: protocolsArray:_array_index:4:status = "OFF".

    mail: protocolsArray:_array_index:4:kind = "OUTGOING".

    mail: protocolsArray:_array_index:4:protocol = 'SERVER '.

    email: protocolsArray:_array_index:4: state = 'STOPPED '.

    mail: protocolsArray:_array_index:4:error = «»

    mail: protocolsArray:_array_index:5:status = "OFF".

    mail: protocolsArray:_array_index:5:kind = "INCOMING".

    mail: protocolsArray:_array_index:5:protocol = "Junk_mail_filter".

    email: protocolsArray:_array_index:5: state = 'STOPPED '.

    mail: protocolsArray:_array_index:5:error = «»

    mail: protocolsArray:_array_index:6:status = "OFF".

    mail: protocolsArray:_array_index:6:kind = "INCOMING".

    mail: protocolsArray:_array_index:6:protocol = "Virus_scanner".

    email: protocolsArray:_array_index:6: state = 'STOPPED '.

    mail: protocolsArray:_array_index:6:error = «»

    mail: startedTime = «»

    mail: logPaths:IMAP Log = "/ var/log/mailaccess.log".

    mail: logPaths:POP Log = "/ var/log/mailaccess.log".

    mail: smtp = logPaths:Lists ' / var/log/mailman/smtp.

    mail: logPaths:Lists subscribe = "/ var/log/mailman/subscription.

    mail: logPaths:Migration Log = "/ Library/Logs/MailMigration.log".

    mail: logPaths:SMTP Log = "/ /var/log/mail.log.

    mail: logPaths:Server Log = "/ var/log/mailaccess.log".

    mail: logPaths:Lists error = "/ var/log/mailman/error".

    mail: logPaths:Lists message = "/ var/log/mailman/message.

    mail: logPaths:Virus DB Log = "/ var/log/freshclam.log".

    mail: logPaths:Lists smtp-failure = "/ var/log/mailman/smtp-failure.

    mail: logPaths:Lists qrunner = "/ var/log/mailman/qrunner.

    mail: logPaths:Amavisd Log = "/ var/log/amavis.log".

    mail: logPaths:Virus Log = "/ var/log/clamav.log".

    mail: imapStartedTime = «»

    mail: servicePortsAreRestricted = 'NO '.

    mail: state = 'STOPPED '.

    mail: postfixStartedTime = «»

    Server: ~ $ sudo serveradmin postconf - n

    Biff = no

    command_directory = / usr/sbin

    config_directory = / etc/postfix

    content_filter =

    daemon_directory = / usr/libexec/postfix

    data_directory = / Library/Server/Mail/Data/mta

    debug_peer_level = 2

    enable_server_options = yes

    header_checks =

    html_directory = / usr/share/doc/postfix/html

    imap_submit_cred_file = /private/etc/postfix/submit.cred

    inet_interfaces = loopback only

    inet_protocols = all

    mail_owner = _postfix

    mailbox_size_limit = 0

    mailbox_transport = dovecot

    mailq_path = / usr/bin/mailq

    manpage_directory = essential

    maps_rbl_domains =

    message_size_limit = 0

    mydestination = $myhostname, localhost. $mydomain, localhost

    mydomain = AAA.co.uk

    mydomain_fallback = localhost

    myhostname = AAA.co.uk

    MyNetworks = 127.0.0.0/8, [: 1] / 128

    newaliases_path = / usr/bin/newaliases

    postscreen_dnsbl_sites =

    queue_directory = / Library/Server/Mail/Data/spool

    readme_directory = / usr/share/doc/postfix

    recipient_canonical_maps = hash: / etc/postfix/system_user_maps

    recipient_delimiter = +.

    relayhost =

    sample_directory = / usr/share/doc/postfix/examples

    sendmail_path = sendmail

    setgid_group = _postdrop

    smtpd_client_restrictions = permit_mynetworks, permit_sasl_authenticated allowed

    smtpd_enforce_tls = no

    smtpd_helo_required = no

    smtpd_helo_restrictions =

    smtpd_pw_server_security_options =

    smtpd_recipient_restrictions = permit_mynetworks reject_unauth_destination permit_sasl_authenticated allowed

    smtpd_sasl_auth_enable = yes

    smtpd_tls_CAfile = / etc/certificates/server. AAA.co.uk.4C925A07FB31A9F93148448EE1140838C6ECE9D2.cha in.pem

    smtpd_tls_cert_file = / etc/certificates/server. AAA.co.uk.4C925A07FB31A9F93148448EE1140838C6ECE9D2.cer t.pem

    smtpd_tls_ciphers = medium

    smtpd_tls_exclude_ciphers = aNULL, SSLv2, ADH, eNULL

    smtpd_tls_key_file = / etc/certificates/server. AAA.co.uk.4C925A07FB31A9F93148448EE1140838C6ECE9D2.key .pem

    smtpd_use_pw_server = yes

    smtpd_use_tls = yes

    tls_random_source = dev: / dev/urandom

    unknown_local_recipient_reject_code = 550

    use_sacl_cache = yes

    virtual_alias_maps = $virtual_maps

    SMTP LOG

    dec 16 15:17:20 Server postfix/qmgr [11517]: fatal: scan_dir_push: open active directory: no such file or directory

    dec 16 15:17:21 Server postfix/master [10118]: warning: treat/usr/libexec/postfix/qmgr pid 11517 exit status 1

    dec 16 15:17:21 Server postfix/master [10118]: WARNING: / usr/libexec/postfix/qmgr: bad command startup - limitation

    dec 16 15:18:21 Server postfix/qmgr [11586]: fatal: scan_dir_push: open active directory: no such file or directory

    dec 16 15:18:22 Server postfix/master [10118]: warning: treat/usr/libexec/postfix/qmgr pid 11586 exit status 1

    dec 16 15:18:22 Server postfix/master [10118]: WARNING: / usr/libexec/postfix/qmgr: bad command startup - limitation

    dec 16 15:19:12 server postfix/Pick-up [11649]: fatal: scan_dir_push: open the maildrop directory: no such file or directory

    dec 16 15:19:13 Server postfix/master [10118]: warning: treat/usr/libexec/postfix/pickup pid 11649 exit status 1

    dec 16 15:19:13 Server postfix/master [10118]: WARNING: / usr/libexec/postfix/pickup: bad command startup - limitation

    dec 16 15:19:22 Server postfix/qmgr [11655]: fatal: scan_dir_push: open active directory: no such file or directory

    dec 16 15:19:23 Server postfix/master [10118]: warning: treat/usr/libexec/postfix/qmgr pid 11655 exit status 1

    dec 16 15:19:23 Server postfix/master [10118]: WARNING: / usr/libexec/postfix/qmgr: bad command startup - limitation

    dec 16 15:20:23 Server postfix/qmgr [11729]: fatal: scan_dir_push: open active directory: no such file or directory

    dec 16 15:20:24 Server postfix/master [10118]: warning: treat/usr/libexec/postfix/qmgr pid 11729 exit status 1

    dec 16 15:20:24 Server postfix/master [10118]: WARNING: / usr/libexec/postfix/qmgr: bad command startup - limitation

    dec 16 15:21:12 server postfix/Pick-up [11761]: fatal: scan_dir_push: open the maildrop directory: no such file or directory

    dec 16 15:21:13 Server postfix/master [10118]: warning: treat/usr/libexec/postfix/pickup pid 11761 exit status 1

    dec 16 15:21:13 Server postfix/master [10118]: WARNING: / usr/libexec/postfix/pickup: bad command startup - limitation

    dec 16 15:21:15 Server postfix/showq [11763]: fatal: open the lock pid/unix.showq file: could not create the file exclusively: no such file or directory

    dec 16 15:21:16 Server postfix/master [10118]: warning: treat/usr/libexec/postfix/showq pid 11763 exit status 1

    dec 16 15:21:16 Server postfix/master [10118]: WARNING: / usr/libexec/postfix/showq: bad command startup - limitation

    dec 16 15:21:24 Server postfix/qmgr [11769]: fatal: scan_dir_push: open active directory: no such file or directory

    dec 16 15:21:25 server postfix/master [10118]: warning: treat/usr/libexec/postfix/qmgr pid 11769 exit status 1

    dec 16 15:21:25 server postfix/master [10118]: WARNING: / usr/libexec/postfix/qmgr: bad command startup - limitation

    dec 16 15:22:16 Server postfix/showq [11805]: fatal: open the lock pid/unix.showq file: could not create the file exclusively: no such file or directory

    dec 16 15:22:17 Server postfix/master [10118]: warning: treat/usr/libexec/postfix/showq pid 11805 exit status 1

    dec 16 15:22:17 Server postfix/master [10118]: WARNING: / usr/libexec/postfix/showq: bad command startup - limitation

    dec 16 15:22:25 server postfix/qmgr [11811]: fatal: scan_dir_push: open active directory: no such file or directory

    dec 16 15:22:26 Server postfix/master [10118]: warning: treat/usr/libexec/postfix/qmgr pid 11811 exit status 1

    dec 16 15:22:26 Server postfix/master [10118]: WARNING: / usr/libexec/postfix/qmgr: bad command startup - limitation

    dec 16 15:23:12 server postfix/Pick-up [11836]: fatal: scan_dir_push: open the maildrop directory: no such file or directory

    dec 16 15:23:13 Server postfix/master [10118]: warning: treat/usr/libexec/postfix/pickup pid 11836 exit status 1

    dec 16 15:23:13 Server postfix/master [10118]: WARNING: / usr/libexec/postfix/pickup: bad command startup - limitation

    dec 16 15:23:17 Server postfix/showq [11838]: fatal: open the lock pid/unix.showq file: could not create the file exclusively: no such file or directory

    dec 16 15:23:18 Server postfix/master [10118]: warning: treat/usr/libexec/postfix/showq pid 11838 exit status 1

    dec 16 15:23:18 Server postfix/master [10118]: WARNING: / usr/libexec/postfix/showq: bad command startup - limitation

    dec 16 15:23:26 Server postfix/qmgr [11844]: fatal: scan_dir_push: open active directory: no such file or directory

    dec 16 15:23:27 Server postfix/master [10118]: warning: treat/usr/libexec/postfix/qmgr pid 11844 exit status 1

    dec 16 15:23:27 Server postfix/master [10118]: WARNING: / usr/libexec/postfix/qmgr: bad command startup - limitation

    dec 16 15:24:18 Server postfix/showq [11870]: fatal: open the lock pid/unix.showq file: could not create the file exclusively: no such file or directory

    dec 16 15:24:19 Server postfix/master [10118]: warning: treat/usr/libexec/postfix/showq pid 11870 exit status 1

    dec 16 15:24:19 Server postfix/master [10118]: WARNING: / usr/libexec/postfix/showq: bad command startup - limitation

    dec 16 15:24:27 Server postfix/qmgr [11878]: fatal: scan_dir_push: open active directory: no such file or directory

    dec 16 15:24:28 Server postfix/master [10118]: warning: treat/usr/libexec/postfix/qmgr pid 11878 exit status 1

    dec 16 15:24:28 Server postfix/master [10118]: WARNING: / usr/libexec/postfix/qmgr: bad command startup - limitation

    dec 16 15:25:12 server postfix/Pick-up [11903]: fatal: scan_dir_push: open the maildrop directory: no such file or directory

    dec 16 15:25:13 Server postfix/master [10118]: warning: treat/usr/libexec/postfix/pickup pid 11903 exit status 1

    dec 16 15:25:13 Server postfix/master [10118]: WARNING: / usr/libexec/postfix/pickup: bad command startup - limitation

    dec 16 15:25:19 Server postfix/showq [11986]: fatal: open the lock pid/unix.showq file: could not create the file exclusively: no such file or directory

    dec 16 15:25:20 Server postfix/master [10118]: warning: treat/usr/libexec/postfix/showq pid 11986 exit status 1

    dec 16 15:25:20 Server postfix/master [10118]: WARNING: / usr/libexec/postfix/showq: bad command startup - limitation

    dec 16 15:25:28 Server postfix/qmgr [11992]: fatal: scan_dir_push: open active directory: no such file or directory

    dec 16 15:25:29 Server postfix/master [10118]: warning: treat/usr/libexec/postfix/qmgr pid 11992 exit status 1

    dec 16 15:25:29 Server postfix/master [10118]: WARNING: / usr/libexec/postfix/qmgr: bad command startup - limitation

    dec 16 15:26:20 Server postfix/showq [12019]: fatal: open the lock pid/unix.showq file: could not create the file exclusively: no such file or directory

    dec 16 15:26:21 Server postfix/master [10118]: warning: treat/usr/libexec/postfix/showq pid 12019 exit status 1

    dec 16 15:26:21 Server postfix/master [10118]: WARNING: / usr/libexec/postfix/showq: bad command startup - limitation

    dec 16 15:26:29 Server postfix/qmgr [12024]: fatal: scan_dir_push: open active directory: no such file or directory

    dec 16 15:26:30 Server postfix/master [10118]: warning: treat/usr/libexec/postfix/qmgr pid 12024 exit status 1

    dec 16 15:26:30 Server postfix/master [10118]: WARNING: / usr/libexec/postfix/qmgr: bad command startup - limitation

    dec 16 15:27:12 server postfix/Pick-up [12048]: fatal: scan_dir_push: open the maildrop directory: no such file or directory

    dec 16 15:27:13 Server postfix/master [10118]: warning: treat/usr/libexec/postfix/pickup pid 12048 exit status 1

    dec 16 15:27:13 Server postfix/master [10118]: WARNING: / usr/libexec/postfix/pickup: bad command startup - limitation

    dec 16 15:27:21 Server postfix/showq [12085]: fatal: open the lock pid/unix.showq file: could not create the file exclusively: no such file or directory

    dec 16 15:27:22 Server postfix/master [10118]: warning: treat/usr/libexec/postfix/showq pid 12085 exit status 1

    dec 16 15:27:22 Server postfix/master [10118]: WARNING: / usr/libexec/postfix/showq: bad command startup - limitation

    dec 16 15:27:30 Server postfix/qmgr [12101]: fatal: scan_dir_push: open active directory: no such file or directory

    dec 16 15:27:31 Server postfix/master [10118]: warning: treat/usr/libexec/postfix/qmgr pid 12101 exit status 1

    dec 16 15:27:31 Server postfix/master [10118]: WARNING: / usr/libexec/postfix/qmgr: bad command startup - limitation

    dec 16 15:28:04 server postfix/postfix-script [12220]: warning: group or other write: / Library/Server/Mail/Data/mta

    dec 16 15:28:04 server postfix/master [12233]: fatal: bind 127.0.0.1 port 25: address already in use

    dec 16 15:29:15 postfix server [12296]: error: to send mail, use the Postfix sendmail command

    dec 16 15:29:15 postfix server [12296]: fatal: the postfix command is reserved for the superuser

    dec 16 15:36:21 Server postfix/postfix-script [13267]: warning: group or other write: / Library/Server/Mail/Data/mta

    dec 16 15:36:21 Server postfix/master [13280]: fatal: bind 127.0.0.1 port 25: address already in use

    dec 16 15:37:08 Server postfix/postfix-script [13371]: warning: group or other write: / Library/Server/Mail/Data/mta

    dec 16 15:39:42 Server postfix/postfix-script [13585]: warning: group or other write: / Library/Server/Mail/Data/mta

    A copy of the disk backup, so that if one of the following conditions fails, or the disk itself is a failure - you have a copy of the data.

    It's probably more permissions, but try a repair permissions and a volume.

    Some of what is shown implies that Postfix is partially started and partially failed.

    What I would try here: create one or two copies - back ups - this disk out for external devices and disconnect and reverse these copies, install a clean copy of 10.7.5 on an external drive to work, install Server.app on it, start the and migrate in this drive OS X Server configuration settings.

    Otherwise, there are discussions on access to the Bank of messages directly.   On top, I don't remember where this mail store.  On most recent releases.app, I look around slot/library/server/mail for this, however.  Probably in/library/server/mail/data/email/users

  • sendmail data header overflow

    I get alerts related to this ID of GIS (3115). It is a Microsoft store with an e-mail Exchange 2003 server. Is there a risk? Should I worry about this alert?

    Laughing out loud

    (1) it is older than the hills

    2) known false positives (see: http://tools.cisco.com/MySDN/Intelligence/viewSignature.x?signatureId=3115&signatureSubId=0)

    (3) you are not running sendmail

    from the s311, it is turned off by default and retirement. You "Kimbo" it or you run an older set of signatures?

  • OBIEE 12 c on AIX 7.1 installation

    I get the error when you run the tool to configuration below:

    I am running AIX 7.1 and 12 DB c with 1 bps. Any help?

    [2016 02-14 T 13: 44:52.048 - 06:00] [bi] [NOTIFICATION] [] [oracle.bi.install.config.basesteps] [tid: 62] [ecid: 0000LBXH ^ Eb4Ax ^ _xT1FiW1MkDP9000004, 0] Failed shooting step: Add the service instance by default with: oracle.bi.bar.si.exception.ServiceInstanceLifeCycleException: failure in the management of all the managers during import service instance.

    [2016 02-14 T 13: 44:52.049 - 06:00] [bi] [ERROR] [] [oracle.bi.install.config.actions] [tid: 62] [ecid: 0000LBXH ^ Eb4Ax ^ _xT1FiW1MkDP9000004, 0] Non-sautees failed during the action of configuration: oracle.bi.bar.si.exception.ServiceInstanceLifeCycleException: failure in the management of all the managers during import service instance. [[

    java.lang.RuntimeException: oracle.bi.bar.si.exception.ServiceInstanceLifeCycleException: failure in the management of all the managers during import service instance.

    at oracle.bi.servicelcm.metadata.BARMetadataPlugin.createServiceInstance(BARMetadataPlugin.java:109)

    at oracle.bi.servicelcm.BIServiceInstanceManager.createServiceInstance(BIServiceInstanceManager.java:286)

    at oracle.bi.install.config.steps.application.AddDefaultServiceInstanceStep.createServiceInstance(AddDefaultServiceInstanceStep.java:113)

    at oracle.bi.install.config.steps.application.AddDefaultServiceInstanceStep.executeSingleShot(AddDefaultServiceInstanceStep.java:73)

    at oracle.bi.install.config.basesteps.SingleShotActionStep.execute(SingleShotActionStep.java:32)

    at oracle.bi.install.config.basesteps.StepList.execute(StepList.java:85)

    at oracle.bi.install.config.actions.BIConfigAction.doExecute(BIConfigAction.java:129)

    at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:405)

    at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:88)

    at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:108)

    at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)

    at oracle.as.install.engine.modules.configuration.action.RequestQueue.performSequentialExecution(RequestQueue.java:284)

    at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:260)

    at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:185)

    at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:82)

    at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:87)

    at java.lang.Thread.run(Thread.java:785)

    Caused by: oracle.bi.bar.si.exception.ServiceInstanceLifeCycleException: failure in the management of all the managers during import service instance.

    at oracle.bi.bar.si.ServiceInstanceLifeCycleImpl.importServiceInstance(ServiceInstanceLifeCycleImpl.java:399)

    at oracle.bi.servicelcm.metadata.BARMetadataPlugin.createServiceInstance(BARMetadataPlugin.java:106)

    ... 16 more

    First fix for this:

    unset ORACLE_HOME before running for OBIEE 12 c configuration wizard.

    Another option is to install without the application of sampleLite.

    Ensure that the language game is another OBIS EN_US-UTF-8 will not start

  • Hosted Oracle Workspace Email does not?

    Hi team,


    Is a current maintenance work apex. Oracle.com the last 12 to 14 hours?


    Until yesterday, email to apex. Oracle.com went smoothly. Today morning, e-mail simple code start


    apex_mail. Send

    (p_to = > '[email protected]', )

             p_from           => ' [email protected] ',

    p_body = > 'Cool ',.

    p_body_html = > 'Cool ',.

    p_subj = > 'Cool '.

    );

    apex_mail.push_queue;

    end;


    does not through. Apex_mail_log shows no errors. Queue is empty.


    I don't know what happened to this code working until yesterday. Are there limits on sending e-mails that I saw in my application? However, it does not even for SQL workshop. Can someone try to send e-mail and see it please.


    joelkallman-Oracle Chubby Kiran Can you please check. Thank you.


    Kind regards

    Sunil Bhatia

    Hi Sunil,

    SHE looked at him.  There was a change of configuration of sendmail that caused this problem.  It is now fixed.

    Thanks again for reporting this.

    Joel

  • How to plan interfaces or packages, if the files are windows and my server is AIX 7.1?

    Hi Expertise,

    I have to plan the interfaces and packages in studio ODI tends in Windows and the server is located in AIX 7.1

    While I'm with Agent to run the interface, it is been display of the file not found error. But while running without an agent he was running, the files are placed in the windows system, but not the AIX server.

    but when I put these files in AIX, I am able to run the interface with the agent. but in my scenario, the files are regardless of operating system.

    Can someone help me in the performance of the interface in which the DISHES files are in the Windows system and ODI server is IBM AIX 7.1 server.

    Please help me correct on how to program (I just calendar because, if the interfaces are able to run with agent then obviously they must provide, please correct me if I'm wrong.  ) interfaces using agent. ???

    I am very new to AIX.

    Thank you

    Shakur.

    1. Install Agent ODI on Windows Server? It solves your problem.

    2. the second way is sharing directory with files Windows OS using samba, and your agent on AIX server could take the files in the shared directory

    IBM how to export a share in Windows and mount the disk on AIX with CIFS. -United States

    P.S. I have never work with AIX, but do the same patterns on Linux

  • DBCA 12.1.0.2 does not deselect options database

    Hello

    After a software successfully on IBM AIX 7.1 installation I started the creation of the database using DBCA

    I noticed that in the section "Database Options", all components are selected and the boxes are Devils so I can't disable any component.

    dbca.png

    I found MOS Doc-ID 1590570.1 and it seems that this is normal.

    1 does anyone know what is the reason for this?

    2. has someone at - he found a solution for this problem? I prefer not to install unnecessary components...

    For some reason you seem to think that it would be an advantage to install a CBD with only the necessary database components. Well, apparently you can create a CBD with all components installed, or create a non - CBD were you can do not to install certain components. I'm afraid a users forum is perhaps not able to provide you with a definitive answer why there is such a design.

    The way I see it, from what I learned about 12 c so far, what you are trying to accomplish would probably add more complexity, affecting many aspects of the multitenancy, including the PDB of the SEED, which should be adjusted according to your custom options. It will also complicate things when you decide to connect or transfer other databases in your CBD.

  • Need steps to install RAC Oracle 12 c on AIX

    Hi all

    I need documentation/tutorials for installing RAC 12 c on a support for AIX version. I don't have any experience on AIX, is very different from CentOS/RHEL/OEL?

    Hi delphine,.

    I highly recommend that you will follow the official Oracle documentation:

    1. Start with the installation of the grid Infrastructure:http://docs.oracle.com/database/121/CWAIX/toc.htm
    2. After the installation of the complete Network Infrastructure, you can go ahead with the installation of database: http://docs.oracle.com/database/121/AXDBI/inst_task.htm#BABBBHJH

    In addition, I recommend you install 12.1.0.2 which is the last patch set for 12 c and it includes many fixes for bugs in 12.1.0.1 and also of new improvements and features that were not available in 12.1.0.1 (for example, the memory option, and many others).

Maybe you are looking for

  • Where can I download drivers for my Satellite A215-s4747?

    Hello I have a Toshiba Satellite a215-s4747 and I intend to downgrade my system from windows vista to windows xp sp 3 and I was looking for the net but could not find the drivers. Can someone help me where I could download all the necessary drivers f

  • Installed Windows after Ubuntu, now cannot start in Ubuntu

    Original title: dual boot problem I installed xp in the drive c. and ubuntu in the D drive... All things are very well... my system worked fine... But when I installed another XP in drive E to test the CD... The ubuntu boot option is gone... when I f

  • I got laptop lenovo (y510), when I turn the camera on the picture is upside down. How can I fix?

    on my lenovo laptop (y510). When I turn the camera on the picture is upside down. I uninstalled the camera and installed again, but the problem persists. looking for a solution.

  • make a call using pjsip

    Hello -Example of VOIP application using pjsip, in my application correctly registered with the server iptel, I created-I want to make a call, but I'm not able to call. I get no error but nothing is happning. Reference to this: http://208.74.204.192/

  • BlackBerry Smartphones stuck on the home screen

    The system seems to be stuck on the "Home Screen" (the screen with the background image). You can hold down the blackberry button and it will bring up a menu where I can read my email and make calls (the trackball works here), but I can't choose anyt