Alert FSRM does not

I have quotas of configuration using FSRM on win2008R2 Server files. The test e-mail can be sent succcessfully to the administrator. But when the file quota is exceeded the thresold, there no email or the event log. No error message is displayed. Any suggestions?

This issue is beyond the scope of this site and to make sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)

Tags: Windows

Similar Questions

  • JavaScript works with an alert, but does not work without it. Why?

    This happened to me before, but I was able to solve my problem. Now I'm not.

    Let me explain: I have a javascript function which I call when I double click on a line on a table:

    [code]

    function CallServ (evt) {}
    source var = evt.getSource ();

    AdfCustomEvent.queue (source, "call",
    {
    },

    (false);

    auxDblClick.call (this, source);
    }

    function auxDblClick (CBC) {}
    split var = src.toString () .split ('=');
    var idButton = split [1];
    var split2 = idButton.split(':');
    okButton = split2 var [0].concat(':');
    for (var i = 1; i & lt; (split2.length - 1); i ++) {}
    okButton = okButton.concat (split2 [i], ' :');)
    }
    okButton = okButton.concat ('dc_cb1');
    var comp = AdfPage.PAGE.findComponent (okButton);
    Alert (COMP);
    AdfActionEvent.queue (comp, comp.getPartialSubmit ());

    }

    [/ code]

    As you can see, my alert line is commented. If it is not commented, the "auxDblClick" feature works very well: it will print the model on the alert, and then it will perform the action of the dc_cb1 button. However, when I commented the alert function, it stops working.

    I have PartialTrigger set to "true" on my dc_cb1 button and the clientComponent is set to 'true '. I've also set to true ClientComponent on the table, but it does not work.

    So, why the function working with alert, but does not work with the alert off the coast? What Miss me?


    P.S: jdev version 11.1.2.4.0

    I found the solution:

    Before the "AdfActionEvent.queue (comp, comp.getPartialSubmit ());" line, I used the update function. Like this:

          var t = document.getElementById (okButton);
       
          t.Focus ();

    Now everything works fine

  • iCal open the alert file does not

    I have installed 10.11.3. iCal Prefs are set correctly according to the suggestions of Apple.

    However, if I set an alert to open the file in the section 'Custiom', the alert does not open the file or reacts in any way in time. What's most frustrating is when I open the same file again to check if I did something wrong, the field 'alert' is 'None' showing!

    What I want to buy Fantastical2 app (tested, it turns very well), although iCal played perfectly for years on different platforms of OS X, I used?

    Hello there, Bob.

    It seems that you encounter no success with the calendar to inform you with alerts personalized on your MacBook Pro. One thing to try is to test the behavior in a new user. This testing process is described in the following Knowledge Base article:

    How to test a question in another account on your Mac.

    Before you try a different user account

    If you see unexpected behavior on your Mac to first try the following steps:

    Try to search the base knowledge of Apple for the specific symptom or an alert message you see. There could be more simple measures that you can take to solve the problem.

    Try to boot your Mac in Mode safe. Restart your computer. Hold the SHIFT key when you hear the startup sound. Release the SHIFT key when you see the Apple logo appears. Your Mac starts up in Safe Mode. Safe mode performs a check of your startup disk directory and removes data from the cache. Once your finished Mac commissioning, restart the Mac normally (without hold the SHIFT key) and see if the problem is resolved.

    Make sure your software is up-to-date. The question that you see can be addressed by installing the available updates.

    Check to see where the problem occurs. If a problem arises until you see your desktop, it is less likely that it is related to a setting or a user account. If a problem occurs with a Web site, see if the pages of other websites correctly first load. There could be a problem with the site and not your Mac.

    How to test with another user account

    You can find out if unexpected behavior is related to the user file or a parameter in trying to reproduce the problem to a different user account. This process includes creating a new user account, connect to it and test for the issue.

    Create a test user account

    1. In the Apple menu, choose System Preferences.
    2. Click the users and groups in the System Preferences window.
    3. Click the lock icon and enter an administrator name and password.
    4. Click on the button Add (+) below the list of users.
    5. Choose a type of user in the new pop-up menu.
    6. Give the user a name and first name, account name, and password.
    7. Click OK.
    8. Close the System Preferences window.

    If there are documents from your user account that you want to test with original, place a copy of these items in the shared folder in the users folder. Press the Option key while dragging a file in this folder to create a copy.

    Connect to the test user account

    Log out of your current user account by choosing logout in the Apple menu, and then open a session the new account that you created. If you are prompted to login with your iCloud or Apple ID account when you log in, skip this step.

    Try to reproduce the problem

    Try the same steps that caused the unexpected behavior to appear. For example, if you are unable to print, try printing from this user account. If you were unable to connect to the Internet, try to navigate on a website of this user account.

    If you use specific test settings depends on (for example using a specific e-mail account or an account iCloud) implemented the same test user account. For email and other parameters, you can use the Internet accounts pane in system preferences to set up these types of accounts. If your home folder files are necessary for tests, copy them into the shared folder in the users folder (/ Users/Shared). After you connect as a user test, copy these items to the same location in the test user home folder to test with.

    If a problem occurs in account only one user

    Is using the same steps in a user account test does not cause the same unexpected behavior, most likely you don't need to reinstall applications or OS X.

    • If a problem occurs only in a single application, check the documentation or Web site for instructions on troubleshooting specific preferences or the definition of the application files.
    • If you need help with a problem or a specific alert message, search the Apple support Web site for the text of the alert message you see.

    If a problem occurs in more than one user account

    If the same unexpected behavior occurs in more than one user account on your Mac, try checking for software or hardware problems.

    Thank you for reaching out to the communities of Apple Support.

    Kind regards.

  • DR4100 alert message does not

    I install a DR4100 and it works for the most part very well.
    One thing I can't operate well email alerts.

    There is a recipient address, a host of electronic mail relay, and the Admin Contact Info (which I assume is the address of the sender used) configured. The unit itself is located on a subnet IP with no routing to the outside world, then the host of e-mail relay is pointing at the IP address of our backup server, also with an interface on the same subnet. On the backup server (Windows 2012R2), there is a portforwarding does (for an SMTP server) with 'netsh interface portproxy', an installation program, I used in many similar cases.
    I can't see any connection attempt (TCPView) on the backup of the DR4100 server, or I see anything in the newspapers of SMTP servers. The DR4100 himself said 'sent by e-mail to all recipients' and the event log shows "Send Test email".

    Is there another log on the DR4100 that could show what's really going on, or how do I fix this to alert?

    Being unsuccessful in the connection to our SMTP server with the DR4100 via a portforwarding server that I put in place the same server to act as a NAT router. This gave me half of success, I can now see the connections made to our SMTP server.

    It seems that, for the alert service e-mail is working properly, the DR4100 configuration must meet the following requirements (not mentioned in the manual)

    • The e-mail relay server can be entered as an IP address, it must be a FULL domain name host name
    • The DR4100 must have a valid DNS configuration of the above work
    • The DR4100 must have a valid default gateway, it can not be on a network again

    So for the other half of the story. indemnify a:
    Emails stuck in our because (legitimately) does not recognize the address of the spam filtering [email protected]

    Is there really no way to change the mailing address? I can't find.
    Otherwise, please add this as in future updates.

  • Red Alert 2 does not work?

    Hey, I have a problem with red alert 2

    that I can't start after the installation

    the following error message appears

    FATAL * string manager failed to initialize properly

    can you help me please?

    Hi Mohammed,.

    Have what version/series of red alert 2 you installed?

    Some versions of red alert 2 are not compatible with Windows 8. Please check the compatibility of the game by clicking on this link.

    Kindly, follow these methods and check if that helps.
    Method 1:
    Right-click on the game .exe and choose Run as administrator.

    Method 2:
    If this does not help, run the game in compatibility mode.

    Follow these steps:

    a. right-click on the game (.exe) and click on Properties.

    b. click the Compatibiliy .

    (c) under "compatibility mode; section, place a check on "run this program in compatibility mode for".

    d. Select Windows XP (or any other mode where the game is compatible).

    e. click apply and OK.

    f. now, try to play the game.

    Let us know if it helps. If the problem persists, we will be happy to help you.

  • Newbie Help - OME Setup - alert Email does not

    Hello

    I try to set up HOME in our Windows domain, but cannot work out why email alerts do not work. Here are the steps that I realized so far:

    • Installed OME v2.0.1.2222 on a server Dell PowerEdge R210 II running Windows Server R2 2012
    • Installed OMSA v8.1.0 on a server Dell PowerEdge R720xd running Windows Server R2 2012
    • The OMSA server, ensure that SNMP interrupts are enabled for all alert & under Alert Actions, enabled Alert on Console & broadcast Message. Platform event filter alert has also enabled
    • Compatible SNMP on both servers and set a unique name for the community & followed the instructions on section "Initial Setup" on the OME itself (what I need to enable ' send trap to authenticate on the server of the OMSA?)
    • On the OME server, configure settings for test purposes, set up to send alerts for all devices & categories & e-mail alert
    • Discovery of the network enabled on servers and made sure that network discovery & & Traps SNMP Service are defined as applications are allowed on the Windows Firewall
    • I sent an e-mail message to test from the server of the OMSA and it happens to the designated mailbox

    I can see alerts when I go on manage-> alerts on server for the server of OMSA OME, but no emails get releases by agencies.

    What Miss me?

    I'm having the same problem as you when I create an alert with the name action: "All issues" with another name works as it should.

    This probably has something to do with the fact that there is a view log of alerts with the same name.

  • Alert control does not not in the container with transparent windows.

    I have a tranparent window container in Flex 3, but the alert control appears.  It works well in the main application with windows, but not at the native Windows.

    Because the alert is called from methods in the file MXML albums titled

    MX:window, the mx:Window is the 'this' pointer the following should therefore be

    fix.

    Alert.Show ("your text", "title", 4, this ");

  • Alert box does not work when the swf is loaded in the parent file

    I'm having a problem. The code pasted below works fine. But when I load the file flash in a flash file 'parent' (the interface on the site), the alert message and audio don't work more.

    Here's the code - this is for when a user fills out a form, and the shot of the 'next' button

    on (release) {}
    if(selectedTrim=="")
    {
    mx.controls.Alert.show ("you must select a level of finish before you continue.", "BEWARE");
    }
    on the other
    {
    var mySound:Sound = new Sound();
    mySound.attachSound("btn-swish");
    mySound.start (0,0);
    gotoAndPlay ("TrimToColor");
    }
    }

    any ideas?

    thought about it - I neeed to add to the library of the project "parent".

  • Red Alert 2 on Windows 7 does not work

    I have Windows 7 on an Acer laptop and would like to play Red Alert 2 and Yuri revenge. Red Alert 2 does not Windows 7.  I can install it, but then the audio plays on the intro to video games.

    Do I have the version of DirectX that was going out in 2000 when I initially played RA2 or the updated version will be sufficient?  I have 3 options that I know of;
    -Install an emulator to run Windows 98 or XP and run RA2 on this,.
    -Change the code in the Games program files to recognize RA2,
    -Buy a new laptop with Windows XP on it and I hope it works RA2, audio-visual and everything.
    Can you help me to play my favorite PC game?  If so it would be greatly appreciated.
    Thank you for your time.
    Sebastian

    Hello

    Method 1:

    The game is not compatible with windows7, follow the link and check.

    http://www.microsoft.com/windows/compatibility/windows-7/en-us/Details.aspx?type=Software&p=Command%20%26%20Conquer%3a%20Red%20Alert%202%20-%20Yuri%27s%20Revenge&v=EA&uid=&l=en&pf=0&pi=0&s=Red%20Alert%202&os=32-bit

    Method 2:

    I suggest you follow the link and check.

    Make older programs in this version of Windows

    http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

    I suggest you install in windows XP mode and check.

    Windows XP Mode

    http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-XP-mode
     Install and use Windows XP Mode in Windows 7

    http://Windows.Microsoft.com/en-us/Windows7/install-and-use-Windows-XP-mode-in-Windows-7

    Download Windows XP Mode

    http://www.Microsoft.com/Windows/Virtual-PC/Download.aspx

  • bike alert icon is not showing in my e bike

    Motorola alert application does not appear in my device in the game store, however, it is shown that updated

    Please help locate

    Do you mean that the app is not in your app drawer?

  • aFile.remove () does not not as expected

    Trying to find out why the code below is not delete all the files in the target folder.

    After some tests, it seems that the only graphic files (jpg, png, gif) are removed, jumping docx, eps, pdf, doc, txt, etc.

    Have you seen what is happening before? Thank you

    #target framemaker
    
    var aGraphicFiles = [];
    
    //Check for target folder existance, if not, create.
    var myTargetFolder = new File("C:\\Basket2\\XML Tests\\BookFolder\\Resources\\DeleteMe");
    if (!checkFolderExists(myTargetFolder)){ //target folder does not exist
        myTargetFolder = new Folder("C:\\Basket2\\XML Tests\\BookFolder\\Resources\\DeleteMe");
        myTargetFolder.create();
    }
    
    //Check if folder DeleteMe is empty
    myTargetFolder = new Folder("C:\\Basket2\\XML Tests\\BookFolder\\Resources\\DeleteMe");
    aGraphicFiles = myTargetFolder.getFiles();
    if (aGraphicFiles.length != 0){
        for (i=0; i<aGraphicFiles.length; i++){ //scan array
            var sourceChild = aGraphicFiles[i];
            if (sourceChild instanceof File){
                sourceChild.remove();
                }
            if (sourceChild instanceof Folder){
                alert("I found a folder");
            }
        }
    }
    
    function checkFolderExists(myObj){
        var flagEx = false;
        if (myObj.exists){
            flagEx = true; //alert("myTargetFolder exists");
         } else {
            flagEx = false; //alert("myTargetFolder does NOT exist");
         }
         return flagEx;
    }
    

    Hi funsekon,

    Here is an example, it works:

    Unfortunately the editor does not accept code for time, so I put here in this way:

    Just a few notes in your code:

    It is easier to check if a file exists:

    If (objfile.exists)...

    The reason why your code does not work

    Define an object file to remove/delete it. : sourceChild = new File(aGraphicFiles[i])

    sourceChild.remove)

    Your line 3:

    var myTargetFolder = new File ("C:\\Basket2\\XML Tests\\BookFolder\\Resources\\DeleteMe");

    should be

    var myTargetFolder = new file ("C:\\Basket2\\XML Tests\\BookFolder\\Resources\\DeleteMe");

    VAT: BE CARFUL WITH THIS SCRIPT - WILL FINALLY REMOVE ALL FILES!

    var older = new Folder ("C:\\test\\deleteme");
    var oStartFolder = oFolder.selectDlg ("select a file");
    If (oStartFolder! = null)
    {
    DeleteFilesInFolder (oStartFolder);
    }

    function DeleteFilesInFolder (foFolderName)

    {

    var locError = false;
    var DeleteFolder = New Folder (foFolderName)
    var foFolderContent = DeleteFolder.getFiles (' ');
    for (var i = 0; i)< fofoldercontent.length;="" i++)="">
    {
    If (foFolderContent [i] instanceof file)
    {
    var FileToDelete = new queue (foFolderContent [i]);
    FileToDelete.remove ();
    If (FileToDelete.error > "")
    {
    locError = true;
    Alert ("error deleting file :") + FileToDelete.fsName;
    }
    }
    }

    }

  • WhatsApp alerts does not not after update iOS10

    I upgraded to iOS10 last night and since the update my custom in WhatsApp alerts are no longer works. Any sound, I set the alert, I get only one defect, his credits when I receive a message.

    Anyone know if this can be corrected by the intervention of the user, or that it does not require an update app WhatsApp will have to produce in the next few days?

    With the help of iPhone 6/16 Gb - WhatsApp v2.16.10 - iOS 10.0.1

    I had the same problem with the MS Outlook application.  Uninstalled and reinstalled the app to fix.  Takes screenshots of the app settings before I removed it.  I hope this helps.

  • HP Advisor alert does not

    Hello

    I installed windows 7 on my laptop. After you install the updates, the HP Advisor appears, but does not. In addition, it says 2 recommended alerts require your attention. It's boring because it is whenever I restart the computer. What could be the reason and what could be the solution?

    Thank you

    Contact HP support

    Related-online http://goo.gl/pNXWX

  • How can I set up Vista so that the PC does not switch to another window (for example the Spy Sweeper alerts) while I am playing a game?

    How can I set up Vista so that the PC does not switch to another window (for example the Spy Sweeper alerts) while I am playing a game?

    Vista is not in control of this technique. Spy Sweeper needs to have an option to control that. If this isn't the case, then it is badly programmed. Flight of focus (go to another window) when it is actually needed is a big no-no for the design. I find this option, if I were you :)

  • Vista Security Center alert (red shield) errors indicating security software (firewall, malicious software) does not not to start?

    Vista Security Center alert (red shield) errors indicating security software (firewall, malicious software) does not not to start?

    This problem has resurfaced. July 2011.

    2011 Microsoft Security Center alerts & errors?

    What The Red Shield keeps popping up with two questions in the Windows Security Center;

    (1) firewall does not run.

    (2) anit-virus Malware software is not running.

    Usually after a while it will reset and run, or I would go on the page of the security configuration to start a program.

    However, recently, the settings will not be reset, and it became an ongoing problem. He seems to have understood

    worse with Windows updates.

    He had a command back to review and reset the settings of windows Security Center in a solution under Windows

    but I wasn't able to find it again (the help has been restructured)

    I ran sfc/scannow, Glary Utilities, CCleaner and Advanced System Care.

    AntiVirus software are Microsoft Defender, F-Secure, Malawarebyes.

    I run Microsoft WindowsVista.

    Any help would be appreciated.

    Sincerely the rich;

    Hi rich,

    You may need to install the hotfix that is described in the following article and see if it helps:

    Windows Security Center does not detect the antivirus application that is installed on a Windows Vista-based computer

    Hope this information is useful.

Maybe you are looking for