Alert security Windows displays haven't turned on automatic updates do not. Cannot depend on them with information about the section centres secuity.

Similar Questions

• Explorer Windows-why are header fields not fill with information about the files?

  I've added a few new header fields to locate some files in Windows Explorer because I need to get the counts for the number of files in each folder and transfer this information to a spreadsheet.  It would be easier that when I opened the main file would be listed all the sub-files and the information I need would be just listed in the field next to the header file.  Otherwise, I need to right click on each file individually and go to properties to get the count of file information.  Any help would be appreciated, even if it's another way to get the leaders for each individual file.  Thank you!!

  Hi Glen,

  Because your problem is by design, you can leave your comments on the following Web site:

  http://connect.Microsoft.com

  Hope this information is useful.

  Jeremy K

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• alert security Windows may be disabled, and automatic updates cannot be activated

  I downloaded and ran Microsoft Security Essentials, Malwarebytes, Glary Utilities, Advanced Windows Care, SuperAntispyware, and nothing seems to disable these WINDOWS SECURITY ALERTS that appear every time I start the computer.   I can not turn ON the automatic Windows Update, and the DIFFICULTY IT CENTER that displays an error and then closes, advising me to go to this FORUM.   Can someone give me please a different direction.   Thank you.

  Hello

  1. What is the exact error code or error message that you get while you run the fix it Center?

  2 would. what Fixit you perform?

  3. what happens when you turn on automatic updates?

  I suggest you to follow these steps and check if that helps.

  Method 1:

  Check if the Security Center service is turned on.

  To do this, follow these steps.
   
  a. click Start, type services.msc and press enter.
  b. double-click Security Center.
  c. set its Startup type to automatic.
  d. define the status of services to Started.
  e. click OK.

  Method 2:

  Set the date system and the hour correctly according to the time zone that you belong

  HOW to: Change the Date, time, number, and currency value displays in Windows XP:

  http://support.Microsoft.com/kb/307938

  Method 3:

  Run the file system (CFS) checker.

  Steps to perform a scan SFC:

  a. click Start, click principally made programs, Accessories, and open the command prompt.

  b. type the following command and press ENTER:

  sfc/scannow

  [The command sfc /scannow. analysis of all protected system files and replaces incorrect versions with appropriate Microsoft versions.]

  Once the scan is finished, close the command prompt window, restart the computer and check.

  Check the link for more information on Scan SFC below mentioned: http://support.microsoft.com/kb/310747

  I hope this helps.

• alert security Windows says I have no anti virus protection, but MSE is on and up to date.

  Original title: security alerts Windows sees no MSE

  alert security Windows says I have no anti virus protection, but MSE is on and up to date.  I get no error message and my updates are current.

  It was the Security Center, but I rebooted and the problem is no longer.  Thank you

• How can I turn off automatic updates of windows on my old xp?

  Original title: chris

  How can I turn off automatic updates of windows?

  Hello

  You have XP that your Thread appears in Windows_XP - Windows_Update Forum at the web address?

  You should only get the malicious software removal tool every month now as Support for XP ended in April.

  If you do not want to get this:

  Click Start > right click on my computer > click Properties > click on the "Automatic updates" tab at the top of the system than appeard Properties window > click the option box for "disable automatic updates > apply and OK your way out.»

  See you soon.

  Edit: just saw that you do not have XP. I typed the reply to your message to moose that you posted your second post

• Whenever I am trying to find information about the album in Windows Media Player I get Script error

  Original title: tagging music in WMP

  Whenever I try to find information about the album in WMP, I get an error message that says:

  An error has occurred in the script on this page

  Line: 1

  Tank: 243

  Error: Automation server can't create object

  Code: 0

  URL: http://fai.music.metaservices.microsoft.com/FAI/scripts/default.js

  Do you want to continue?   Yes or no

  (Sorry, didn't know how to do the screenshot)

  This has happened for several weeks now

  Hi,

  ·         What operating system do you use?

  ·         What version of Windows Media Player do you use?

  Method 1:

  Follow these steps and check if that helps:

  (a) launch Windows MediaPlayer

  (b) click on the file-> tools-> Options-> tab security->

  Uncheck the box c) the following

  (d) to run the command script when it is present

  (e) the script commands and rich media streams runs when the player is in a Web page

  Method 2:

  If the problem persists, disable script debugging in Internet Explorer, and then check the issue.

  a. open Internet Explorer, click Tools and then click Internet Options.

  b. in the Internet Options dialog box, click the Advanced tab.

  c. Click to select the script turn off debugging (Internet Explorer) and disable script debugging (other) check boxes, and then click to clear the display a notification of every script error box.

  d. click OK to close the Internet Options dialog box.

  Review the links below, I'm sure that this will help solve your problem better:

  How to fix script errors in Internet Explorer on Windows computers?
  http://support.Microsoft.com/kb/308260

• Automatic updates do not. Discovered when trying to install Security Essentials.

  I have XP - Media Center Edition.  It has been updated to SP - 3 some time ago.  I've always used updates to power off, so I never see the process underway.

  I just uninstalled Norton 360 and that he would upgrade to MS Security Essentials, but Setup has failed.  I then googled the error code and found an article that said that it could be related to not having all the updates.  I went and manually start the automatic updates and I found it is bombed on.  Then I checked the log and found that it worked very well until an automatic update around September 17, 2009.  After this, almost all the automatic updates failed.  I never know what I used the update to the power down of the method.

  I found a post that says (Phase 1) stop the windows update routine and rename the folder "c:\Windows\SoftwareDistribution" and then restart the windows update routine.  Phase 2 was to force a reinstallation of Windows Update Agent.  I did these things and when I did an update, found that an update loaded for windows, but all other updates (for things like the Net.frame) and other applications, has failed.  Try to install Security Essentials also bombed.

  I looked through the forums and found that most of the people are referred to an article on whether you installed the SP3 before restarting after repair or installation of SP2.  This doesn't seem to be my problem.

  I hope that this story sounds familiar to someone who can guide me to a solution.  I still haven't yet installed virus protection program and really want to use the bulk of the security.

  Thanks for any help you can give,

  John

  [1] the error Code is 0 x 80070643.

  [2] Yes, this machine has had two or three other versions of Norton until I removed it.  Each previous version and the last have been that all deleted using the function "Remove Programs" "control panel".

  A1. See http://social.answers.microsoft.com/Forums/en-US/msestart/thread/908fad3e-f9fc-4d8a-be83-ae7d3bc48db5

  A2. Applications, (Norton and McAfee) are known to not uninstall (or upgraded) themselves.

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. double-click on the file that you saved in #1 above to run the utility. DO TAP not your keyboard until the race ends, then restart.

  4 test cycle.

  For more assistance, post in...

  Support MSE forums
  http://social.answers.Microsoft.com/forums/en-us/category/MSE

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Can not turn on automatically updates.

  Automatic updates will not not turn on. I use Windows XP, SP3. I use the Micro Soft Security Essentials I goto the Security Center to turn on the automatic updates but it does not allow me to do. The light is red, not green.

  Any help?

  Hi Tim,.

  Were there changes to the computer before the show?

  Please follow the steps from the link and check that it works very well.

  Check out the link:

  You can not turn on automatic updates on a Windows XP Service Pack 2 computer

  http://support.Microsoft.com/kb/916261/en-us

  For all windows questions do not hesitate to contact us and we will be happy to help you.

• Windows Vista Ultimate guard restart after automatic updates

  Someone help me please find the fix for this problem.  I don't want to re - install Vista again.

  My computer has been in auto for Windows Vista Edition full update.  Service pack 1 & 2 was installed without any problems.  The last update was an optional update for Chinese langauage packs.  When I noticed that this update was at a standstill at 36%, I tried to restart the computer.  Then, there was that messeage "configuration updated, do not turn off the computer".  It takes more than 15 minutes and nothing happened, so I restarted the computer.  Now, the message appears after windows logo vista 'configuration updated step 3 or 3 to 0%.  The update could never finished, the computer just reset again once, the same thing repeats again and again.

  Thank you.

  Hello

  I guess that part of the question could be a driver which is really old or similar should not be loaded.

  This exit Windows updates on (after you have access) and stop the updates of the driver to load.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ---------------------------------------------------

  You can use the solutions in this KB - 3 methods and I listed a little help for them below

  The update is not installed successfully, you receive a message, and the computer restarts when you try to
  install an update in Windows Vista
  http://support.Microsoft.com/kb/949358

  Method 1: Start Windows Vista with the Windows installation media and use the repair feature

  How to do a startup repair in Vista
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  You can also do a safe mode startup repair to access the Recovery Options If you have them available
  or use the DVD as described above.

  This tells you how to access the System Recovery Options
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  Method 2: Start the system in safe mode and then use the system restore feature

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  Method 3: Rename the Pending.xml file, and then change the registry (this method is part of the advanced troubleshooting)

  See article below for that.

  You can use this method on the updates that have this problem.
  http://support.Microsoft.com/kb/949358

  Hide the update (click right - HIDE in the updates of Windows) and go to the Microsoft Download Center to download
  and install it.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  ------------------------------------------------------

  Once you are in Windows I was running once again reset here as a precaution.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Hope this helps sort it out for you.
  Rob - bicycle - Mark Twain said it is good.

• Windows Vista boot problems, after an automatic update

  Can someone help me with the boot?
  When I start my laptop it goes until is displayed: 'No configuration update 3 of 3' and all stays at 0% for 1 or 2 minutes and after it stops automatically. It restarts again and appears the same following 2 minutes and stops.
  How can I fix this without having to install the DVD? I don't have the installation of my Windows DVD. But with on DVD with also windows vista, I tried to fix it, he showed me that it is not a compatible version of vista on the DVD.

  Hello

  I guess that part of the question could be a driver which is really old or similar should not be loaded.

  This exit Windows updates on (after you have access) and stop the updates of the driver to load.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ---------------------------------------------------

  You can use the solutions in this KB - 3 methods and I listed a little help for them below

  The update is not installed successfully, you receive a message, and the computer restarts when you try to
  install an update in Windows Vista
  http://support.Microsoft.com/kb/949358

  Method 1: Start Windows Vista with the Windows installation media and use the repair feature

  How to do a startup repair in Vista
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  You can also do a safe mode startup repair to access the Recovery Options If you have them available
  or use the DVD as described above.

  This tells you how to access the System Recovery Options
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  Method 2: Start the system in safe mode and then use the system restore feature

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can also do a restore of the system of starting with a Vista disk.

  Method 3: Rename the Pending.xml file, and then change the registry (this method is part of the advanced troubleshooting)

  See article below for that.

  You can use this method on the updates that have this problem.
  http://support.Microsoft.com/kb/949358

  Hide the update (click right - HIDE in the updates of Windows) and go to the Microsoft Download Center to download
  and install it.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  ------------------------------------------------------

  Once you are in Windows I was running once again reset here as a precaution.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Hope this helps sort it out for you.
  Rob - bicycle - Mark Twain said it is good.

• Windows XP is very slow and auto update works but when I try to run internet explore the system times out. »

  Original title: Windows XP runs very slow

  Windows XP is very slow and auto update works, but when I try to run internet explore the system times out.

  Hi Bill,

  Thanks for posting your question in the Microsoft Community.

  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

  To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:

  1. What is the error message that is accurate or complete?
  2. have you made any recent hardware or exchange of software on your computer before the show?

  Please follow the links below and check the issue:

  Maintenance tasks that improve performance:
  http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/maintenance-improve-performance

  Slow PC? Optimize your computer for optimal performance:
  http://www.Microsoft.com/athome/Setup/optimize.aspx#fBid=R7qdKIMaJyT

  Warning of Chkdsk.
  Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.
  WARNING: Reset Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Internet Explorer is slow? 5 things to try:
  http://Windows.Microsoft.com/en-us/Windows/help/Internet-Explorer/slow-five-tips-to-boost-performance

  Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  Your response is very important for us to ensure a proper resolution. Please get back to us to help you accordingly.

• I cannont turn on automatic updating. I have is gray. Disable the automatic update is selected but also gray and selected.

  I cannont turn on automatic updating.  I have is gray.  Disable the automatic update is selected but also gray and selected.

  you have the service disabled?

  Click Start > run > type in services.msc box and Microsoft Management Console will be open.

  Search for automatic updates. Right-click the line, and then click Properties. In the dialog that opens, make sure Startup Type is automatic. Click on apply. Wait for it. Then click Start under Service status. You will see another pop-up window but it is a progress bar. If the service does not start, you will get an error. Otherwise, you will see wuauserv in the Task Manager. You should also see the yellow shield which shows you download updates. Also check your Windows Firewall and third-party firewall installed on the machine. Another place is the router/modem. You may need your ISP to help with the party.

• can not turn on automatic updates in Control Panel

  I have Windows XP (SP3) and for some reason, I can't turn on updates Auto Windows in the control panel.  The page to make it is grayed out.  I am registered as an administrator.  Any suggestions?

  Hi MikeTinVA,

  You can check if this article helps.

  You can not turn on automatic updates on a Windows XP Service Pack 2 computer

• Automatic update does not work. Unable to load Windows 7 or SP2. Error "cannot find the file specified."

  original title: automatic update does not work. Unable to load Windows 7 or SP2.

  XP Pro, automatic updates do not work.  Unable to load Windows 7 or SP2.  Error on SP @ is "cannot find the specified file.  Tried to load files noted missing for Windows 7, but was not able to load either.  All the other conditions to download files.

  Hello

   

  
  1. have you downloaded the stand-alone package for the service Pack 2 or are you using Windows update?

  2. you also try to install Windows 7?

  
  Method 1.
  Run Disk Cleanup and disable the security software and then try to install the same and check.
  See the article below for disk cleanup:
  http://support.Microsoft.com/kb/310312

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

   

  Method 2.
  If the problem still exists together own starting the computer and attempt to install the service pack.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353
  Note: After that troubleshooting is complete, configure the computer to a normal startup. See the "steps to configure Windows to use a Normal startup state" section in the article above.

   

  Also, it is recommended to install the Windows XP service pack 3. Reference:

  How to obtain the latest Windows XP service pack
  http://support.Microsoft.com/kb/322389

   

   

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows Media Center error: signature of the problem of additional information about the problem

  Description

  Signature of the problem

  Additional information about the problem

  original title: Windows Media Center in Windows 7 Home Premium

  then, it looks like some Windows Update is causing a problem.
  Two options-
   
  1 do a restore and immediately go into Windows Update and change the setting for
  Download, but let me choose what to install. Then install the updates one
  until you find the one that breaks the system. Do another restore, turn off
  updates and when one appears that is the problem, right-click and then
  Select HIDE this update. Let us know what is the update.
   
  2. you can go in Panel, programs and features, see the installed updates
  Sort by date and uninstall the updates one at a time until you find bad.
  Then set Windows Update to download and install not and notified on the
  updates, right-click to hide. Let us know...
   
   
  Barb
   
  MVP - Windows/entertainment and connected home
   
  http://digitalmediaphile.com/
   
  Please mark as answer if that answers your question