alignment of the text in landscape mode domestic xperia

Similar Questions

• Is there a reason why certain numbers automatically generated do not align with the text?

  I'm building a small book in InDesign and generated chapter numbers only display correctly aligned with the text of the chapter into two chapters. In others, they are slightly lower than the base line and print that way. They all use the same format title and list paragraph. (I even checked the Master Pages for objects that drag may interfere and see nothing.) Someone has seen this and can point me to a solution?  The original document was from the Pages converted to MS Word, so I tried to see if there are some strange characters which came with the conversion, but as you can see on the screenshot below, nothing shows up. Any help to identify the problem or a cure would be greatly appreciated.

  Here is a chapter that is displayed not correctly, and it is the base character Format options.

  

  This is the same information and display of one of only two chapters that are aligned properly.

  

  This is the same information for the works do not and the chapter number of work outlining the options for bullets and numbers.

  

  

  artomis-

  Eugene said that options 'last '. He meant the four options at the bottom of the list, but especially 'by default Figure Style'. Try "tabular covering" as Peter suggested.

  Tom

• Adobe distorts 2010 Word headers on the pages in landscape mode

  I have a Word 2010 document that contains portrait pages and landscape.  Use headers page-w/odd/even numbers in Gothic characters of the engraver.  When I print the Word document to Adobe Pro, it looks great on the screen, but when printed, the cast of the headers is distorted on the pages in landscape mode only.  Looks like each letter is tilted at an angle and it give it a comic effect fonts.  Portrait pages are fine.  I'm running out of ideas on how to solve this problem.  Can anyone help?

  Well, they have finished installing the XI Version and the problem is solved.  Computer scientists here are as perplexed as everyone else. They began to think it was a printer problem. But, for now, the version of the software change did the trick.  Thanks for all your ideas and suggestions.  It is good to know there are 'puzzle solvers' out there that are willing to share their time and knowledge.

• Change the alignment of the text in the Center.

  FO some reason, the forum search returns 0 results for me no matter what I enter.  I'm sure this has been asked before, but how to change the alignment of the text of point to Center?

  Even if it's at a point, he treated the same as text in the box. The following books

  var docRef = app.activeDocument;
  
  var textRef = docRef.textFrames[0];
  
  //textRef.textRange.characterAttributes.size = 28;
  
  var paraAttr_0 = textRef.paragraphs[0].paragraphAttributes;
  
  paraAttr_0.justification = Justification.CENTER;
  

• How to change the text of the Portrait to landscape mode

  Greeting,

  I work with Adobe Acrobat Pro X.  I have a simple decorative frame which has a text editable within the framework area.  It is in portrait position.  I also want the user to be able to change the orientation to landscape, which is easy.  However, I can't find where I can change the orientation of the text in the editable from portrait to landscape.  Is this possible?  Or should I just include another image file which is in the right direction for text of landscape?

  Thank you

  You can use JavaScript to do this by changing the rotation property of the field. Simply decide how you want to trigger the change. For example, you can use a bookmark, a non-printing somewhere on the page, or by the user to do something in the field itself. The following code can be used in the case of the mouse to the top of a text field that causes the rotation move from 0 to 270 degrees (-90) when the user clicks Shift in the field:

  Script mouse upwards to the text field

  If {(event.shift)

  Event.Target.rotation = event.target.rotation = 0? 270: 0;

  }

  Change occurs when the field loses focus. The scenario of a button or a bookmark could be:

  Script mouse upwards to button/bookmark

  getField("Text2").rotation = getField("Text2").rotation = 0? 270: 0;

  where 'Text2' is the name of the text field.

• Advice needed on the alignment of the text in an e-mail.

  I'm developing an email with a small logo (with a web link) with a descriptive text to the right. I tried to put a picture here, but it won't download for some reason any so posted it here: http://imgur.com/gallery/lHRD8VC/new

  I can align the text on the image, but when it falls in the second line, it drops below the logo image and left justified. I want it all back right of the logo to look neat. I know that I can use the tap and space to get what I want in the email, but she is shown in a smaller window when it is created, all goes pear-shaped.

  Any help would be appreciated.

  use a table. 1 row end on 2 columns. Picture in the text first, in the second.

• Slide on the stroller in landscape mode when the "home" button is on the right

  I tried to cross the split screen/slide to work on my iPad Pro, and it drives me crazy!

  I can not work properly when I use the Smart keyboard and iPad is oriented mode landscape with button at home on the right side. No matter how hard I try, I can't tab to display by dragging my finger from right to left. I have to be to tilt the iPad to portrait or landscape mode with button at the House on the left, and then shared screen reverse the iPad back so that I can use the keyboard.

  Every once in a while I'll manage to get the tab appears, but it is extremely rare.

  If someone has experienced this problem and, if so, have you solved?

  Thank you!

  Hello idiot3qu3,

  Comparable to that you are facing questions are a few bugs that a number of people may or may not be one on their iPads. It should be smoothed in a future iOS firmware update. Until then, you just have to work in another direction, or simply use the button home, turned to the left landscape.

  Hope this helped,

  -RamalTheCamel

• How to keep images splash screen specific for the portrait and landscape mode. for example, I have one 360 x 640 image for portarit and another image of 640 x 360 for the landscape

  How to keep specific splash screen for portarit and landscape mode images. for example, I have one 360 x 640 image for portarit and another image of 640 x 360 for the landscape.

  The two are different

  When the user holds the phone in portarit specific Portrait image should appear

  Similarly when the user holds specific landscape landscape image must be indicated without changing the quality of the image.

  IAM answer showing 1 portarit boot image using the

  Hi srk2012,
  You cannot apply 2 different splash screen inames for OS5, 6, 7.

  Check this link https://developer.blackberry.com/html5/documentation/rim_splash_element.html

  Thank you best regards &,.
  Laurent Subudhi

• Alignment of the text (like MS Word) field

  I'm trying to settle my field of text manually since acrobat only offers me 3 choices for alignment 'LEFT', 'RIGHT' and 'CENTER '.  Is there a 'JUSTIFY' property because my text field will be used for the writing of long texts as I would with writing such as MS Word software?

  Also, each line of this text box is numbered (on the bottom) and it is crazy hard to get align these numbers with each line.  My second question is, so once you check the box "multiline", is it possible to set the number of lines (or height) in the field, so he would perform a kind of "vertical justification" and therefore automatically invariable to line numbers?  Suppose I need to change the number of lines from 40 to 47, I would change just the code instead of having to mess with the font size and type as well as having to redraw the background each time so that it can match.

  I think it might be something that uses the height property of the textbox control.

  Finally, when the user reaches the end of the text box, typing continues under the bottom of the box without warning him that he cannot be looking at the screen when writing.  So if I can set a maximum number of lines, it could be collapsed, I could put an app.alert or better yet, setFocus to the next page, so it would be continuous typing without noticing.

  I am aware that an acroform is not writing software, but there must be a way to do it better.

  The type of control you are looking for is not really accessible to the general public with the fields created with Acrobat. If you allow rich text formatting, the user has the option to set a full justification and has some control over spacing. Jump to the next field when the first is full cannot really be done transparently.

  A lot of what you want to do is no longer possible with an XFA form created in LiveCycle Designer. The justification and the attack can be preconfigured and you can configure the dynamic fields that auto-élargir according to the needs.

• Need help with the alignment of the text

  I don't know the answer to this question is simple, especially since I have no chance of finding the same question asked previously.  I want middle align text so that it is centered between the top and bottom of the box / text field created using the "text" tool  Frame on the left is simple: I just click on the button "align left" on the text panel.  There is no button to the top, in the Middle, or align at bottom.  In fact, when I'm done with this question, I'll go ahead and present it as a new idea!

  I also need to do the same with the text I add the vertical menu widget (menu manual buttons)... If there is a big difference in the way in which this is done, please let me know.

  Here is an example of what I'm willing to do.  Yes - the bottom image is a composite, then please ignore the spaces at the beginning of the text.  I also wanted to "align middle" instead of "align center".

  

  Thank you!

  If you want to center align text vertically, use top padding spacing Panel and change the desired number of pixel values (depending on the size of the text block).

  Also, you can use whole pixel values absolute for all major (i.e. 16 px) values rather than the values of percentage (120%) that are managed differently in different browsers.

  Here's a screenshot of the sample with settings that worked for me in my case where the text appears to be centered in all major browsers.

  

  You can also watch follows her thread that should answer most of your vertical alignment related research.

  http://forums.Adobe.com/thread/996101

  Thank you

  Vinayak

• Wrong with the alignment of the text because of the Bounding Box (SC6)

  I'm fighting to properly align the text because the selection boxes are not centered around the text.  Why, when I try to align on another object, it is turned off.  I use CS 6 and, as a general rule, the point tool and type.  I have read other forums that suggest that it could be the type of policy (which perhaps they are 'bad' fonts), but apparently not any type of police I use.  The framework encompassing always has extra space under the text, even when you use a very standard font such as Times New Roman.  Anyone can shed some light on this?  Thank you very much!

  Sarah

  Sarah,

  1. in the preferences, select "use Preview Bounds."

  2. Select the text you want to align.

  3. go to effect > path > describe the object.

  4. align

  Peter

• Table goes out of alignment in the text box

  I created a very simple table in InDesign CS5 on Windows 7, like this:

  

  However, when you start typing in a cell, it goes like this:

  

  To fix, you make the text bigger or smaller box and then resize it to what it is supposed to be. Also when I do a first page datamerge moves like that too, even if the rest is correct. When you export to PDF it comes out wrong as well. If anyone wants an example file that I can post it here.

  Anyone have any ideas what's causing the alignment change when text is entered into the table?

  Well, I think I see here the rub - if you left me speechless for a while there!

  So, I see that you have the text box that contains your table to help you align your table in the center of your page. (i.e. the box containing the text is organized around the outside of the page and the table is centered lef/right using point centering and up/down by using the command "Center" in the control bar. There is nothing particularly wrong with this method, I think it may be the source of your problems with alignment change unexpectedly.

  Looking at your file, I found that the removal of "Center" and change to the opposite to "align top" took the nervous behavior of the text box. It is more shifted when I tried to type. He however move the entire table to the top of the screen. For now we'll leave it there. Align the Page: Centre from left to right, Center t to b.

  Your final result should be an element that is always perfectly centered on the page, but which can be of type in without any unpredictable jump around!

  Now, we will select the entire area that contains the table. In the paragraph Panel, click "Left aligned". This will move the table to the top left of your document. Now, frame content. Go in the Align Panel.

• We have the alignment of the text for the journal messages & indicators of progress of cant

  Hi all...

  I use Cp4.

  

  

  I want to align the text to the right and down. Is this possible in Cp4. is there any solution for this?

  Elodie

  Hi Elise,.

  Yes, but this has no effect at all, which is really confusing. The area in her repeat the Message will stay always aligned; I think it's because of the way the review is presented for the wrong answers, where a (large) table will be inserted and it would be difficult to achieve with the text aligned left or centered correctly. In CP5 that this possibility (unemployed) isn't there anymore, that is why I forgot it. In CP5.5 review has totally changed, symbols are now used to correct/incorrect feedback.

  Lilybiri

• Alignment of the text in forms

  I have the same rectangle at the top and at the bottom of a presentation as a banner of classification. When I add text to the rectangle using the right-click | Add text, the text seems to be aligned exactly as I want, centered on the x and y-axis. However, once introduced in preview or published, the text seems to be aligned at the top of the rectangle. Does anyone else have this problem? Should I just put a transparent caption on the form, rather than use add text?

  Oh, sorry, I meant CP5-question.

  In CP4, I always used a transparent text on a form caption, did not like the functionality of the text here for different reasons (alignment being one of them), especially since it well will not sink in shape (oval, polygon).

  Lilybiri

• alignment of the text in the tables

  More precisely/currently, I have a table heading (in acorss 3 columns in a single row of merged cells) which is defined for alignment of the Center, but when I preview the it or put, it moves to the left and move the text of 2 lines instead of one, as if the cells are not merged. I checked the HTML coding, etil seems well (said that alignment is Center).
  
  Why is it that is happening... and no, the tables has not been imported. The table was created in HR.
  
  HELP AND THANKS!
  
  Ko

  Looks like it could be a problem with the fixed width of the column...

  Go to the real code and try to remove the attribute ' width: 85.1pt;'.
  This attribute is part of the tag

  Which solves the problem?