All (21) updates failed during the 8 days.
None of the updates will be installed.
21 updates? That seems a LOT.
Microsoft for may 2012 security updates were released on May 8, 2012. Last updated May 22, 2012. Don't know how you get 21, but... Plausible, I guess.
Could you listing them by KB # only here?
What is the error you get?
What have you tried to do to remedy the situation?
What I propose...
Search for malware:
Download, install, execute, update and perform analyses complete system with the two following applications:
Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)
Search online with eSet Online Scanner.
Cleaning the components of update on your Windows XP computer
It is a good idea at this time to ensure that you continue to get the updates you need. This will help you ensure that your system update is ready to do it for you.
Download and run the MSRT tool manually:
http://www.Microsoft.com/security/malwareremove/default.mspx
(Ignore the details and download the tool to download and save to your desktop, run it.)
Reset.
Download/install the latest program Windows installation (for your operating system):
(Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
(Download and save it to your desktop, run it.)
Reset.
and...
Download the latest version of Windows Update (x 86) agent here:
http://go.Microsoft.com/fwlink/?LinkId=91237
... and save it to the root of your C:\ drive. After you register on theroot of the C:\ drive, follow these steps:
Close all Internet Explorer Windows and other applications.
AutoScan--> RUN and type:
%SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
--> Click OK.
(If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...
Reset.
Now reset your Windows with this FixIt components update (you * NOT * use the aggressive version):
How to reset the Windows Update components?
Reset.
The less you have to run all the time, most things you want to run will perform:
Use Autoruns to understand this all starts when your computer's / when you log in. Look for whatever it is you do not know usingGoogle (or ask here.) You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.
You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory. This can help you to identify applications that you might want to consider alternatives for and get rid of all together.
Do a house cleaning and the dust of this hard drive:
You can free up disk space (will also help get rid of the things that you do not use) through the following steps:
Windows XP should take between 4.5 and 20 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.
If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
http://www3.TELUS.NET/dandemar/spack.htm
(Especially of interest here - #4)
(Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )
You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning
How to use disk cleanup
http://support.Microsoft.com/kb/310312
You can disable hibernation if it is enabled and you do not...
When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:
-Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
-Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
-Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.
You can control the amount of space your system restore can use...
1. Click Start, right click my computer and then click Properties.
2. click on the System Restore tab.
3. highlight one of your readers (or C: If you only) and click on the button "settings".
4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
5. click on OK. Then click OK again.
You can control the amount of space used may or may not temporary Internet files...
Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...
-Open a copy of Microsoft Internet Explorer.
-Select TOOLS - Internet Options.
-On the general tab in the section 'Temporary Internet files', follow these steps:
-Click on 'Delete the Cookies' (click OK)
-Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
-Click OK.
-Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
-Once it's done, click OK, close Internet Explorer, open Internet Explorer.
You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:
CCleaner (free!)
http://www.CCleaner.com/
(just disk cleanup - do not play with the part of the registry for the moment)
Other ways to free up space...
SequoiaView
http://www.win.Tue.nl/SequoiaView/
JDiskReport
http://www.jgoodies.com/freeware/JDiskReport/
Those who can help you discover visually where all space is used. Then, you can determine what to do.
After that - you want to check any physical errors and fix everything for efficient access"
CHKDSK
How to scan your disks for errors* will take time and a reboot.
Defragment
How to defragment your hard drives* will take time
Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing youpouvez wish to make:
Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.
If you want, come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end. This isn't 100% necessary - but I'd be willing to bet that you would gain some performance and features in making this part.
Tags: Windows
Similar Questions
-
All security updates fail with the error A 80071, 91 code
Hello!
System information: Windows 7 Ultimate 64-bit, i7-720QM, 6 GB RAM, 256 GB SSD, ATI 4670 [Dell Studio XPS 1645]
Background:
- UAC was arrested. Turn on UAC stop my gadgets to work [another thread on these forums...].
- A week ago, I got speech recognition works only with a local edition. Insert this ctfmon '=' CTFMON registry entry. EXE, to HKLM\Software\Microsoft\Windows\CurrentVersion\Run, fixed the problem. However, I can't find to this registry entry.
- Four days ago, I had slow internet speed. I did a 'Complete' Microsoft Security Essentials scan and it found many exploits (Explot: Java/CVE-2009-3867.) BX, TrojanDownloader / OpenConnection.AK, TrojranDownloader:Java / Rexec.c and a dozen others). I removed all the. The internet speed is back to normal.
- This morning, I have updated the firmware on my SSD to activate the TRIM. I restored an image of the drive I did with Windows Backup and Restore just before updating the drive.
Problem:
- I tried Windows Update after update of the SSD. It downloads all updates, installs, and prompts you to restart the computer to complete the installation. During the shutdown, some files are 'configured '. Upon restart, during the boot of Windows GUI (circles of flight), there is a break-up of the code, something about the registry. On logon, it gets "35%" and says so "returning default configuration updates,' or something like that. I get a notification indicating that the updates failed.
- On Windows Update, only Silverlight, Windows malicious software removal, MSE definition updated and updated Office Publisher are successful.
- All other updates (security updates, cumulative updates, security updates for IE, updates for Windows) fail with the error code A 80071, 91.
- If you are looking for updates that fail, here they are: KB2416400, KB2296199, KB2305420, KB2385678, KB2423089, KB24236673, KB2442962, KB246759 and KB2443685.
What I tried:
- Disk Cleanup attempt (and unfortunately removed all restore points). Did not work.
- Attempt to sfc/scannow. He found a few files, that it could not correct; I have the CBS.log newspaper if you need. However, updates still do not work.
- Tried to reset the resource manager to file with "fsutil resource setautotest true c:\ ». She is successful. However, after the restart, the updates still do not work.
- Tried a Full scan with MSE. No anomaly.
- Tried to reset components to update Windows (using the Vista Fix - It via KB971058). Updates still do not work.
- Attempt of Microsoft Malicious Software Removal Tool (updated dec 2010) Full Scan, no malicious software was detected. Updates still do not work.
- Attempt of Anti-Malware analysis complete Malwarebyte, no malicious software found. Updates still do not work.
I don't think that this is malware, but a Windows problem... My internet is wobbly for these last two days, a lot of packet loss (pages only "" half load, some missing frames, etc.). Not sure if this is related, but it downloads the updates very well. It is not always the marker "35%".
I'm out of ideas. What's next?
Thank you
~ Ibrahim ~.
1. about 1 year, I installed MSE.
2 McAfee has been preloaded; the subscription was updated (in a 90-day trial), and I uninstalled McAfee completely (regular uninstall and Removal Tool provided by McAfee).
3. Yes, for about 30 minutes before I uninstalled and installed MSE.
4. Yes.
However, with a little help seven forums, we have figured out it is the registry. I did a reinstall and then the updates installed correctly.
Thanks for the help, if! :)
-
Update failed during the restoration of Win10 for Win7
Hello
There was a update failed while he was in the process of restore. Once the process is finished, I noticed that, so I clicked on "Install updates". Which also failed.
I've never met update of the issues before the restore Win10 to Win7.
Name of the update problem :
-Microsoft .NET Framework 4.6.1 for Windows 7 for x 64 (KB3102433)
Type of computer / OS :
-Hewlett-Packard desktop computer bought in 2011, AMD Athlon (TM) II X 4 955 processor 3.20 GHz, 8.00 GB of RAM
-Windows 7 Home Premium (preinstalled at the factory), Service Pack 1, 64-bit
Antivirus applications installed before the upgrade and at a Win10; those after cancellation for Win7 :
-Windows Defender (off)
-Malwarebytes Anti-Malware free (do not prompt for reinstallation, update to Win10, have not opened since rollback)
-AVG AntiVirus Free (relocation for upgrade to upgrade to Win10 successful, reinstall to update to Win7 after restoration, failure)
Previous programs anti-virus installed / uninstalled :
-factory pre-installed Norton Internet Security 2011 (60-day trial subscription). Uninstalled in 2011.
-ISP provided security: Shaw Secure powered by F-Secure. Uninstalled in 2012.
These are in the downloads folder (but I don't know more what/why and can't tell if they are installed programs or not) :
-Windows-KB890830 - x 64 - V5.20.exe: Microsoft Windows Malicious Software Removal Tool, version 5.20.11000
-msert.exe: no details of properties (no version, no digital signature, etc.), but I think that it is supposed to be the Microsoft Safety Scanner
-windows-kb890830 - v3.21.exe: Microsoft Windows Malicious Software Removal Tool, version 3.21.5103.0
-NPE.exe: Norton Power Eraser, version 2.0.0.52 the file, version 2.0 product, year 2011
Latest updates successfully and the repetition does not install of KB3102433 :
Error codes for KB3102433:
-26/08/2016: 80200001
-29/08/2016: 13EC
-03/09/2016: 643
-03/09/2016: 643
Measures taken and the results:
1) has no installation by the restore process: (KB3102433), 80200001 Code
-revealed by timestamp in the update history
(2) Windows Update interface: 1 important update available (KB3102433)
-Click on install updates
Result (s):
-Failed / update history does not record the event
3) of http://support.microsoft.com/kb/3102433
-Download and run the "download the .NET Framework 4.6.1 (Offline install) package now"
Result (s):
-"Installation failed...". Fatal error during installation"
-Updated story does not connect me
(4) download and run the Windows 7 update (wu10.diagcab) troubleshooting tool
Result (s):
-Popup: An error occurred when troubleshooting: a problem is preventing start the troubleshooter.
Identifier of the package: WindowsUpdateDiagnostic
Path: unknown
Error code: 0 x 80070002
Source: engine
User: (me, user Admin account)
Context: restricted
(5) run the System File Checker tool
Result (s):
(6) Windows Update interface: 1 important update available; KB3102433
-Click on install updates
Result (s):
-This time the story recorded event update:
Installation date: 29/08/2016
Installation status: failed
Error details: Code 13EC
(7) download and run other troubleshooting of Windows 7 update (WindowsUpdateDiagnostic.diagcab)
Result (s):
-He scored a few points set except one:
-"" Problems: Windows Update, error 0 x 80070057 do not set ""
-This stage caused the update Interface to turn red on the theme and lose all it's information. such as:
-1 important update available / 8 optional updates available <> before - now -online NO update available
-Final check of updates: front: 29/07/2016 - now: never
-Updates have been installed: front: 22/07/2016 - now: never
-"Install updates" button "Check for updates" has disappeared, replaced by
8) of http://support.microsoft.com/kb/3102433
-Download and run the "download the .NET Framework 4.6.1 (Offline install) package now"
Result (s):
-"Installation failed...". Fatal error when installing... See log file»
-Updated history do not log the event
(9) click on ' Check for updates ' hopefully bring "updates available".
Result (s):
-He kept checking for about 2 hours without change
-I didn't know how to cancel the verification process, then...
(10)... Computer restarts
Result (s):
-updates stops
-Updated Interface:
-Does not display available updates
-Final check of updates: never
-Updates have been installed: never
* 3 days later, without getting any change, it automatically installed 9 updates successfully. Now, the update Interface is once again changed. "Show all available updates" option appears, horodateurs, replacing '' never. ''
(11) select problem update (KB3102433), and then click on install
Result (s):
-A failed; Error Code 643
-Click on 'Try' again: same results
Any help would be greatly appreciated.
Thank you
Proceed as follows: Set "Never search updates" automatic updates, restart, and try again.
Best regards, VZ :)
-
Windows update fails during the installation of KB950762
Info by mistake the complete log of events.
Event type: error
Event source: Windows Update Agent
Event category: Installation
Event ID: 20
Date: 12/05/2009
Time: 13:54:01
User: n/a
Computer: VIDEO1
Description:
Installation failure: Windows failed to install the following update with error 0 x 80070003: Security Update for Windows XP (KB950762).For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 57 69 6 33 32 48 52 65 Win32HRe
0008: 73 75 74 30 78 38 3d sult 6 c = 0 x 8
0010: 30 30 37 30 30 30 33 20 0070003
0018: 55 70 64 61 74 65 49 44 UpdateID
0020: 7 b 32 37 38 42 42 36 = {278BB6 3d
0028:36 43 43 45 35 34 2D 6 C-CE54 2D.
0030: 34 30 46 42 2D 41 35 41 40FB-A5A
0038: 32 41 45 35 35 38 30 2 - AE5580 2D
{0040: 34 43 33 39 31 37 7 20 4 3917 d}
0048: 52 65 76 69 73 69 6f 6th revision
0050: 4e 75 6 d 62 65 72 3d 31 number = 1
0058: 30 36 20 00 06.Offers in windowsupdate.log:
Report REPORT EVENT: {ABF68B62-29C6-494A-8574-3C613C2A5F72} 2009-12-05 13:53:55:406 - 0500 1 182 101 {278BB66C-CE54-40FB-A5A2-AE55804C3917} 106 80070003 MicrosoftUpdate error content install Installation error: Windows failed to install the following update with error 0 x 80070003: Security Update for Windows XP (KB950762).
2009-12-05 13:54:01:765 1168 c80 to THE > # RETURN # to THE: research updates [CallId = {2B963804-32BB-4E9B-9F78-8D880127D4B8}]
2009-12-05 13:54:01:765 1168 c80 at # 1 detected updates
2009-12-05 13:54:01:765 1168 c80 to THE #.
2009-12-05 13:54:01:765 1168 c80 to # END # in THE: research updates [CallId = {2B963804-32BB-4E9B-9F78-8D880127D4B8}]
2009-12-05 13:54:01:765 1168 c80 to THE #.
2009-12-05 13:54:01:765 1168 c80 to THE present notification is disabled.Error message when you try to install updates by using Microsoft Update or Windows Update Web site: "0 x 80070003".
http://support.Microsoft.com/kb/956705
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft -
the iDRAC6 firmware update failed during the process
Hello
One of my colleagues went to a customer who has a few problems with the upgrade of its most recent firmware iDRAC6.
Case 1
R710 - with firmware version 1.41-> 1.54 fails to 30%Case 2
With the firmware 1.54-> 1.70 R710 - fails to 30%. Also I tried 1.54-> 1.80 fails also to 30%.In both cases we found no indicationin error log files. Download was fine, checksum is ok, only FW upgrade failed, but no details.
It's a common mistake? What can we do to work around this error?Kind regards
Stijn
I finally after trying to update iDRAC 6 version 1.0.3.10 to 1.98.8 (last update of this post)
The update (stuck) were held 30%.
Solution is to download "firming.d6" * wait 5 minutes * before clicking on the button update to begin loading the new firmware.
R610 server would not update unless the server has been turned off and then follow instructions above.
If I clicked the button to update firmware soon after downloading the file, it would always fail at 30%.
-
Automatic update failed during the update to ch 13.0.2 error U44M2P7
PS 6 CS crashes after update auto running for the update of the Support of retina MBP. What can I do to fix this?
A thread was started about the update from 13.1 to http://forums.adobe.com/thread/1113531. Check this thread and run adobe Support Advisor indicated in the message.
If you are looking for a support then I recommend to contact our support team. You can contact the support of talk at http://adobe.ly/yxj0t6.
-
I have one membership year for cloud creative after that I got with my update, but recently the other day, it changed all my applications of trial versions. How to return to my membership and demo of the apps?
Check that your current account (and only the adobe, used in the next step id is good) by logging in here and check the status of your subscription, https://www.adobe.com/account.html
then, if it's current, disconnect and then back to your client application using the adobe with the link above in cc id: http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html
If this fails to solve the problem, Cloud Creative applications back in test mode after an update until 2015 for CC
-
SP 2 update fails in the third stage during reboot after update
Downloaded SP2 without problem.
Update is done without a problem.
PC re - starts automatically.
Poster "Phase 1/3, then Phase 2/3 SP2 installation Phase 3/3.»
100% of Phase 3 and sits there for a long time.
Later displays "Installation failed, removing all SP @ updates"
Sits with the above display for a long time.
Re-boots at the login screen.That is what it is.
HP Pavilion S3100n, Vista Home Premium 32-bit with all updates prior to SP2.
Hi Keithg,
Thank you for visiting the Microsoft Answers forum.
As one of the troubleshooting steps I recommend trying to install the SP1 update as a standalone, follow these steps.Resolution 1: Install the stand-alone package for the service pack instead of using Windows Update to install the Service Pack
Note If you have already tried to install the stand-alone package for the service pack and you have encountered this problem, skip this resolution and go to resolution 2.
If you don't know if you've tried to install the stand-alone package for the service pack, it is recommended that you try the following steps to install the stand-alone package for the service pack. By using the stand-alone package to install the service pack, you eliminate installation issues that may be related to Windows Update. This simplifies the troubleshooting process.
How to obtain the stand-alone package for the service pack
To obtain the service pack, see the following articles in the Microsoft Knowledge Base, depending on your operating system, and then look for the option to install the service pack from the Microsoft Download Center.
935791 (http://support.microsoft.com/kb/935791/) how to obtain the latest Windows Vista service pack
Solution 2: Run the system update readiness tool
System Update tool checks your computer and trying to resolve certain conditions that can interfere with the installation of the updates or other software. However, before you download the tool, you must determine whether your computer is running a 32-bit version or a 64 bit version of the Windows Vista operating system. If your computer is Windows Vista installed, and you know which version you are using, go to the section "how to download the system update readiness tool. If you are unsure which version your computer has installed, follow these steps:
- Click Start
- In the Search box, type system, and then click System in the programs list.
The operating system is displayed as follows:
- For a 32 - bit version operating system, 32-bit operating system appears for the system type under System .
- For a 64 - bit version operating system, 64-bit operating system appears for the system type under System .
After you determine which version of Windows Vista, your computer is running, download system update readiness tool.
How to download the system update tool
You can download the preparation tool system update from the following Microsoft Download Center Web site:
http://www.Microsoft.com/downloads (http://www.microsoft.com/downloads)
The following files are available for download from the Microsoft Download Center:
Windows Vista
Download the Windows Vista package now. (http://www.microsoft.com/downloads/details.aspx?FamilyID=2889489c-ee87-4607-8aa5-812e8078ab27 & amp; DisplayLang = en)
Windows Vista for x 64 systems
Download Windows Vista for the systems based on x 64 package now. (http://www.microsoft.com/downloads/details.aspx?FamilyID=14f76773-007c-493f-bece-243bc21ac73d & amp; DisplayLang = en)
Hope this information is useful.
Let me know if it worked.
All the best!
Best regards, Joseph.N sunny. Microsoft answers Support engineer visit our Microsoft answers feedback Forum and let us know what you think.
-
BlackBerry Smartphones Blackberry Bold 9930 update failed and the software does not load
I have a Blackberry Bold 9930 and yesterdasy I received a msg saying to upgrade to 7.x software Blackberry. I followed the instructions (takes too long like 2 hours to download) and then. Big mistake because it cooked my phone. It seems that when you upgrade, the upgrade process goes thru, but stops after the time zone to restore the process and reports an error 602 with a reset button to reset your database. The reset button does not work and I restarted the phone to restore the db. At the moment that it restarts, launched the process, and even once, it failed after the msg indicating time zones (100% and overall restoration treatment 7%). Zones roughly completed, but then I got a msg saying I wandered 602 belive. On all courses was about 5 to 10 percent. Now my phone is undesirable because it does not restart. Verizon says they have a large number of phones across the country, but BlackBerry says it's a matter of Verizon... Someone at - he already heard of this I am now without such a 4 days while I get a replacement Friday because of the holiday... I am not very happy as another question, I found - during the upgrade process it used the cells instead of my wirelss home network to download the software and it really took about 2 to 3 hours, then another hour before it failed during the upgrade process. So about. 3 to 4 hours to play with an upgrade yesterday.
Thank you
Rich
Hello merlin02131
Welcome to the Forums of the BlackBerry Support
Sorry to hear about the problem you are experiencing during the update!
But you can still use Desktop Software for the update process, personally, I prefer never to do an Over the Air update. I think that something has gone wrong with the update process and thus you encounter this error 602.
You have a backup of your device, or using BlackBerry protect for the backup?
If you wish you can try several method to recover your device of this error, all you need is a PC and an Internet connection active. But attention, this method deletes the data user in this device. This is the Knowledge Base to follow:
KB10144 : How to force detect the BlackBerry smartphone using the Application Loader
Additional information:
KB29237 : "App Error 602" appears on the BlackBerry smartphone running BlackBerry 7
-
New installation fails during the expansion of the files Windows 7 Pro
Recently, I built a new computer after my old man died. I installed Windows 7 Pro, I had on the old system. Everything worked well for about a month. Then I started having various errors, some suggesting a memory error. I ran several times using the most comprehensive parameters of memtest and no problem not found. Further inspection, I discovered that a critical system update was applied just before that the problems started. I decided to roll back the change. It does not solve the problem. I tried to do a system repair. That did not work. She only had basic as IE11 and Skype applications. I had also installed the utilities for the motherboard and graphics card. So, I decided to do a clean install. Each time, it fails during the expansion of the files. The error message is, "Windows cannot install required files. The file may be corrupted or missing. Make sure all files required for installation are available, and restart the installation. "Error code: 0 x 80070570." He gets up to 30% each time. I tried to install for a V300 Kingston SSD (120GB). I also tried another SATA II HDD (750 GB) with the same problems. I downloaded a new ISO and tried to install from that. Yet once, it is not at the same point. I noticed that whenever it creates a partition system reserved 100 MB which is almost full. At one point, I got a message saying that there are about 8 000 MB of free space. (I think that was all trying to manually unzip the files by a tip I found online). I found several suggestions for similar problems, but the solutions proposed did not help. I'm sure it will be a simple solution, but I'm out of ideas. Any help would be appreciated.
Motherboard: MSI MPower MaxCPU: Intel i7 - 4770 K 3.5 GHz (not overclocked)RAM: Crucial Ballistix Sport 16G (2x8G) DDR3 - 1600 MHzSSD: Kingston SSDNow V300 Series 120 GB (no special driver needed)HARD drive: Seagate 750 G 7200 RPM SATA IIVideo: EVGA GeForce GT 2 640 GBCase: Corsair 400RPower supply: Corsair TX650MCPU cooler: H80iDVD: HP, BluRay BD R/W driveOS: Windows 7 Professional 64-bit upgrade (the old computer was an XP update)CPU Temp is around 42 C.If Memtest86 fails then you need to get into the BIOS and set the RAM timing. Memtest86 + displays the calendar then use the value displayed and compare to the real specs for your memory. Also, you may need to increase the voltage to the RAM (in BIOS) place a small amount.
As regards the function of Intel EIST, let her enabled for now. Then enable it after installing Windows successfully.
=============================================================
It's the set of test utilities that I use on every new system that I'm building.
Note: If you are OverClocking or use an automatic overclocking or BIOS power saving features, start by disabling: Intel EIST, Turbo Mode, Cool and pretty and fall back to the speed of stock as a starting point.
Disconnect any other (additional) internal hard drives and external USB devices.
Look for any loose hard drive power or cables SATA, graphics card or other power cables.First run Memtest86 +:
It runs from a floppy disk or CD and should eliminate or confirm if one or more of your memory
sticks are bad or the values of the SPD in the BIOS are correct.
Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), so no errors at that time then your ram is OK.
http://www.memtest.org/
Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)
http://www.overclockers.com/forums/showthread.php?t=409152Hard drive test:
If you do not know your readers of the brand and model, try "Speccy",.
It provides information from the computer/system in detail:
OS, CPU, RAM, motherboard, graphics, Hard Drive, optical, Audio, peripherals, network.
Note: Option RAM indicates number of slots, DRAM Timing.
Works your memory speed (frequency). The nominal frequency of your memory.
http://www.Piriform.com/SpeccyTest your player - create a Bootable CD:
Ranging from 5 to 25% (depending on the make and model) new hard disks are defective.
Note: Reliability of HDD sank medium over the past 18 months.Test your drive with the car manufacture utility.
If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools
(bootable CD) and check bad sectors.
SeaTools for information: http://www.seagate.com/support/downloads/seatools/
SeaTools for Windows download: http://www.seagate.com/support/internal-hard-drives/enterprise-hard-drives/saturn/seatools-win-master/
SeaTools for DOS download:
http://www.Seagate.com/support/internal-hard-drives/consumer-electronics/LD25-series/SeaTools-DOS-master/For Western Digital readers to download the .iso from WdDiag file: http://support.wdc.com/product/download.asp?groupid=611&sid=30&lang=en
Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htmHitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT
Diagnostic tool available for use by customers who believe that having a brand Toshiba Fujitsu hard drive:
http://SDD.Toshiba.com/main.aspx?path=ServicesandSupport/WarrantySupport/SoftwareUtilitiesNotice of suport Fujitsu disk utility: http://www.fujitsu.com/us/services/computing/storage/hdd/
Toshiba CD bootable: (BACK Diagnostic Tool version 7.0 for IDE/ATA/SATA hard disks)
http://SDD.Toshiba.com/main.aspx?path=ServicesSupport/FujitsuDrivesUSandCanada/SoftwareUtilities#diagnostic============================ SSD Test Software =============================
Intel® drive SSD Toolbox
https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=18455Life of the SSD: http://ssd-life.com/
OCZ Toolbox: http://ocz.com/consumer/download/firmware
SanDisk SSD Toolkit: http://kb.sandisk.com/app/answers/detail/a_id/9328/
= Once Windows installed =.
Device drivers: have you installed latest drivers from device of the manufacture of the motherboard?
Check their support site for the latest drivers as the CD that came with the computer
or motherboard may be older and less stable drivers.Visit the download of the manufacture of the graphics card:
Download and install the most recent Windows 7 or 8 drivers for your card.
ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
NVIDIA: http://www.nvidia.com/Download/index.aspx?lang=en-usSee also the test of 'Smoke box' Nvidia or other demos: http://www.nvidia.com/object/cool_stuff.html#/demos
or equivalent ATI.Prime 95:
http://www.Mersenne.org/freesoft/
It's a stand alone .exe file contained in an archive .zip.
Simply choose to run the 'stress test' option for 8 hours or more.
If your PC can pass this test, your memory and CPU
are very good (close the housing cover in order to maintain adequate ventilation)Core Temp:
The temperature of each core of the processor.
Note: For the overclockers using stock radiator and cooling fan Intel/AMD you can expect
a range of 35 to 40 at idle and 60 to 65 C max temperature when running Prime95.
http://www.alcpu.com/CoreTemp/CPU-ID (CPUZ): http://www.cpuid.com/cpuz.php
Watch the clock speed of the CPU under various conditions of loading
(when using speed step technology Intel EIST).
#1 Note:
CPU - ID has two tabs - tab 'Memory' that shows the actual speed of the memory
and the "SPD" tab shows the nominal speeds for each memory location that is filled.
#2 Note:
COMPARE the two values, the actual speed of the memory must not exceed the rated speed of your memory.CPUID HWMonitor: Hardware program that reads the sensors of health main PC monitoring systems.
voltages, temperatures, fans speed.
http://www.CPUID.com/HWMonitor.phpTest of Stress of FurMark GPU (graphics card):
http://www.oZone3D.NET/benchmarks/fur/Pass marks burn in test: http://www.passmark.com/
Burnin test, and their test bench at the same time give a good workout from all the major parts of Windows.HD Tune:
Provides information of the car and has an option (tab scan error) to test your drive.
http://www.hdtune.com/CrystalDiskInfo:
http://CrystalMark.info/software/index-e.html
User Manual: http://crystalmark.info/software/CrystalDiskInfo/manual-en/
Monitoring the State of health and the temperature. Solid State Drives brackets (value of the software).SpeedFan:
Monitors internal temperatures and has a function of analysis health online (SMART tab) for hard disks drive.
It displays your drives model number and compares your drive with other discs of the same brand and model.
Note: Unfortunately now includes a lot of bloatware, be very careful when installing remove bloatware.
http://www.almico.com/SpeedFan.phpGPU - Z:
A utility light, designed for you give information about your video card and GPU.
http://www.techpowerup.com/GPUZ/PC WIZARD:
A powerful utility designed especially for detection of hardware, also analyses more.
He is able to identify a large scale of system components and supports the latest technologies
and standards.
http://www.CPUID.com/pcwizard.phpJ W Stuart: http://www.pagestart.com
-
Hello
first of all, thank you for providing tools such as vCenter Converter for free.
I tried to convert a physical machine to Windows 7 using the current vCenter Converter Standalone (version = 4.3.0 build = build-292238). The target of the conversion is an external USB disk. I am to convert the entire machine, including a disc of about 280 GB in size.
The conversion takes more than 24 hours, but seems to work quite well. Right after training is converted (to about 98% of the whole process), the conversion fails during the reconfiguration with the following error message:
Unexpected exception: converter.fault.FileCreationFault
-ERROR - convert: converter.fault.FileCreationFault
{(converter.fault.FileCreationFault)
dynamicType = < unset >
faultCause = (vmodl. NULL in MethodFault),
file ="
.\vstor2-mntapi10-shared-468030AD0004C435020000000A000000\Windows\$reconfig$ «»MSG = ""
}
There is no other message log of the recent in the converter - server.log. The converter - worker.log says:
from reconfiguring the system...
using temp dir C:\Windows\TEMP\vmware-temp\vmware-SYSTEM\sysReconfig
ReconfigurationTransaction: cached reviews system volume
LocalPathToGuestSystemFolder:
.\vstor2-mntapi10-shared-468030AD0004C435020000000A000000\Windows\LocalUndoFolder:
.\vstor2-mntapi10-shared-468030AD0004C435020000000A000000\Windows\$reconfig$Cleaning up the C:\Windows\TEMP\vmware-temp\vmware-SYSTEM\sysReconfig temp directory...
TaskImpl failed with MethodFault::Exception: converter.fault.FileCreationFault
Scheduled timer cancelled, succeeds StopKeepAlive
InternalTask2VmomiTaskAdapter updates, States: 4, percentage: 0, xfer rate (Bps): < unknown >
BaseParserImpl::Parse Config info is not cached
F:\VM\wartberg\wartberg.vmx analysis
NIC has no info support, unable to determine connectionType
NIC has no info support, unable to determine connectionType
NIC has no info support, unable to determine connectionType
NIC has no info support, unable to determine connectionType
NIC has no info support, unable to determine connectionType
NIC has no info support, unable to determine connectionType
Registry hive
. \vstor2-mntapi10-shared-468030AD0004C435020000000C000000
Boot\BCD is responsible under the name mntApi397493888030118019Error 13 read the value of the element of key mntApi397493888030118019\Objects\ {9dea862c-5cdd-4e70-acc1-f32b344d4795} \Elements\24000001
MntApi397493888030118019 hive unloaded
Registry hive
.\vstor2-mntapi10-shared-468030AD0004C435020000000C000000\Windows\system32\config\SOFTWARE is charged under the name mntApi3984454896301180192 error reading value CSDVersion key mntApi398445489630118019\Microsoft\Windows NT\CurrentVersion
2 error reading information SP
CurrentType key is multiprocessor free
2 error reading CurrentType mntApi398445489630118019\Wow6432Node\Microsoft\Windows NT\CurrentVersion key value
2 error reading 64 bits of information, probably not a 64-bit system
the product name is Windows 7 Home Premium
Registry hive
.\vstor2-mntapi10-shared-468030AD0004C435020000000C000000\Windows\system32\config\SYSTEM is charged under the name mntApi404763500730118019Error reading the mntApi404763500730118019\ControlSet001\Services\vmxnet - 2.
Error 2 vmxnet information, assuming that vmxnet is not installed
MntApi404763500730118019 hive unloaded
MntApi398445489630118019 hive unloaded
Registry hive
.\vstor2-mntapi10-shared-468030AD0004C435020000000C000000\Windows\system32\config\SYSTEM is charged under the name mntApi406994304730118019MntApi406994304730118019 hive unloaded
Registry hive
.\vstor2-mntapi10-shared-468030AD0004C435020000000C000000\Windows\system32\config\SOFTWARE is charged under the name mntApi4192247261301180192 error reading value CSDVersion key mntApi419224726130118019\Microsoft\Windows NT\CurrentVersion
2 error reading information SP
CurrentType key is multiprocessor free
2 error reading CurrentType mntApi419224726130118019\Wow6432Node\Microsoft\Windows NT\CurrentVersion key value
2 error reading 64 bits of information, probably not a 64-bit system
the product name is Windows 7 Home Premium
Registry hive
.\vstor2-mntapi10-shared-468030AD0004C435020000000C000000\Windows\system32\config\SYSTEM is charged under the name mntApi425417937030118019Error reading the mntApi425417937030118019\ControlSet001\Services\vmxnet - 2.
Error 2 vmxnet information, assuming that vmxnet is not installed
MntApi425417937030118019 hive unloaded
MntApi419224726130118019 hive unloaded
Registry hive
.\vstor2-mntapi10-shared-468030AD0004C435020000000C000000\Windows\system32\config\SYSTEM is charged under the name mntApi427773541230118019MntApi427773541230118019 hive unloaded
Failed to get the volume mount points 640 (03 = * 00 > 7000000000000: 4146 (type = 2, code = 259))
VMOUNT library: 1450 error communication error with the pilot while
Error 1016 (hive to load error: unknown error 1016 (0x3f8) (1016)) temporary hive loading
.\vstor2-mntapi10-shared-468030AD0004C435020000000C000000\Windows\system32\config\SOFTWARE under the name of the mntApi367215230118020 key.Unable to load the registry hive
.\vstor2-mntapi10-shared-468030AD0004C435020000000C000000\Windows\system32\config\SOFTWARE, error 0x3f8.Error 16258 when you open the software hive
Failed to get the volume mount points 640 (03 = * 5320000000:00404, 16258 (type = 2, code = 1016))
MNTAPI Info OS: Microsoft Windows 7 Home Premium edition: root of home: Windows Service Pack: worm 0: 6.1
OS resides on the disk partition 2 F:\VM\wartberg\wartberg.vmdk path
BaseComputerImpl::Open configuration file: F:\VM\wartberg\wartberg.vmx
WorkerConvertTask: production bundle task agent for task with id = 'task 3 '.
bundle of newspaper http://Converter.Agent.DiagnosticManagerImpl[task-3] Generating task.
http://Converter.agent.DiagnosticManagerImpl creation bundle of newspaper "task-3 - qfyxaphl.zip ' and size '11155" CRC "1600250029."
http://Converter.agent.DiagnosticManagerImpl adjusted bundle of newspaper "task-3 - qfyxaphl.zip ' and size '11155" CRC "1600250029."
WorkerConvertTask: recovery agent special newspaper bundle to "C:\Windows\TEMP\vmware-temp\vmware-SYSTEM\agentTask-task-3-geckipbm.zip".
http://Converter.agent.DiagnosticManagerImpl recovery bundle of newspaper with key ' task-3 - qfyxaphl.zip "at offset = '0' and max size ="11155.
WorkerConvertTask: Bundle successfully retrieved from "C:\Windows\TEMP\vmware-temp\vmware-SYSTEM\agentTask-task-3-geckipbm.zip"
Scheduled timer cancelled, succeeds StopKeepAlive
bundle of newspaper http://Converter.Worker.DiagnosticManagerImpl[task 1] Generating task.
As the conversion took more than 24 hours, I would be happy to learn how to avoid this problem or even how to save the VM already created (I don't know if this is possible, but at least the virtual machine appears to be underway, but then crashes saying that a required device is not present).
Any help is appreciated!
Thank you
nepper
OK - I'll upload versions changed in maybe 15 minutes
muss weg kurz
_________________________
VMX-settings- WS FAQ -[MOAcd | http://sanbarrow.com/moa241.html]- VMDK-manual
-
Photoshop elements 12 fails during the installation of the shared technologies.
I have the same problem as all these people. Yes, I tried all these things, yes I followed all the links and scoured the internet:
http://forums.Adobe.com/message/5914286
http://forums.Adobe.com/message/5909390#5909390
http://forums.Adobe.com/message/5904696#5904696
Elements of 12 install fails during the installation of Adobe Organizer. No indication of problems in the newspapers, just fails and rolls back. Near as I can tell that people at adobe don't know what is the real problem, they have only a long series of very complicated and obscure tricks that _might_ "solve" the problem. I tried all in all imaginable combinations and still can not get 12 items to install. I installed win7 vanilla stock, plain, applied patches, tried to install it and it always fails.
I repeat. This facility has failed me in the same way on a box own win7.
Any software that still requires one of these measures of hack to install must be sent to the shop for more tests. I mentioned to try all these things and more!
Copy the installer to the root of c:
Delete this folder or what
Make a new admin account and install with
Edit the registry
Disable services in msconfig
Install in safe mode
What would be more useful for me now would be either 1) a patch to correct this error of critical installation or 2) explicit explanation from Adobe on what the real problem is so I can fix it myself.
I'm a little upset, sorry for the tone. It is the worst single installation experience that I have ever met.
Hi Jeff,
To follow up, I got an adobeconnect session today with a very competent and friendly adobe technology. It seems that we have solved the problem. There was some kind of problem with air and/or bridge do not store their files updated, not 100% on the part so don't quote me, he said. He said the challenge is to completely uninstall anything adobe and start from scratch. The other option is a bit of hackers, but it works for me and saves me the trouble to completely redo the installation. To track here are the steps to achieve this work, ymmv:
-Go through the Adobe Premiere elements 12 install the process up to the point where the shared components installation crashes. Do not click OK.
-To start the task (ctrl + alt + delete) Manager
-Go to the pane and kill msiexec.exe * 32 process, the adobe Installer must die.
-Remove the Adobe Premiere elements 12 link that is created on the desktop. Do not use this link, it points to the Welcome screen and crashes.
-Also delete C:\Program Files\Adobe\Adobe first Elements, Premiere Elements 12\Adobe 12.exe, for the same reason as above.
-L'exe that works is in this same directory called "Adobe first Elements.exe", he does not attend the Welcome screen and it doesn't seem to work.
-Now it takes Adobe Application Manager to run, and we just killed the installer, so go to catch it:
http://www.Adobe.com/appsmanager
-You don't even have to actually run, just download and install and you're good (if you are not running it she updates to Adobe Creative cloud that is unknown to the consequences).
-Now start Adobe first Elements.exe and connect your adobe ID
-ftw, should be good to go.
I tried this on 3 different machines. The installer beat identical overall and this procedure has got it to work. NB - Organizer apparently still is not installed, but that doesn't bother me. Don't know if this will have an impact long term operations.
Thanks for your help, this doesn't seem to work for me now.
-isaac
-
Qosmio G20 failed during the installation of SP3, now bluescreens on startup!
Qosmio G20 failed during the installation of SP3, now bluescreens on startup!
Any suggestions?
I can't restore to a date prior to the node without danger, he keeps failing?
Please help me...Hello
Have you tried booting with the CD of Microsoft WXP facilities and try to fix it?
Sorry, but I don't see any other solution.A few months ago, I got a blue screen after installing the new software. I tried to do the same with the safe mode and system restore, but it has not t worked for me.
At the end I backed up all my important data and installed new WXP. -
Acrobat XI 11.0.06 update fails during installation
Acrobat XI 11.0.06 update fails during installation. Advice or assistance? Here are the contents of the Setup log:
Jan 17 00:32:34 fox.local installed [5955]: PackageKit:-----Begin installation -
Jan 17 00:33:44 fox.local installed [5955]: PackageKit: install failed: error Domain = PKInstallErrorDomain Code = 112 "an error has occurred during execution of the package"AcrobatUpd11006.pkg"scripts." UserInfo = 0x7fb9615c5160 {NSFilePath =. / postinstall, URL = file://localhost/Volumes/AcrobatUpd11006/AcrobatUpd11006.pkg#payload.pkg, PKInstallPackageIdentifier = com.adobe.acrobat.a11.AcrobatUpd11006, NSLocalizedDescription = an error occurred during execution of scripts from the package "AcrobatUpd11006.pkg".} {
NSFilePath = '. '. "/ postinstall;
NSLocalizedDescription = "an error occurred during execution of the package \U201cAcrobatUpd11006.pkg\U201d scripts.";
URL = "file://localhost/Volumes/AcrobatUpd11006/AcrobatUpd11006.pkg#payload.pkg";
PKInstallPackageIdentifier = "com.adobe.acrobat.a11.AcrobatUpd11006";
}
Jan 17 00:33:44 fox.local [11306] Installer: installation failed: the installer has encountered an error that caused the installation to fail. Contact the manufacturer of the software.
Jan 17 00:33:44 fox.local installer [11306]: display UI "Installation Failed".
Jan 17 00:33:44 fox.local installer [11306]: message "Installation Failed" display user interface: "Setup has encountered an error that caused the installation to fail. Contact the manufacturer of software for assistance. ».
The upgrade is not the 11.0.06, but it's an update. The upgrade is that you can buy if you had an earlier version of Acrobat (at least 9 AA). The upgrade is significantly lower than the price of the full product. With the upgrade you must also have the SN of the previous product available for installation. That's why I asked for the upgrade. Once you install AA XI, then go to 11.0.06 is a free update (updates are changes in the minor version and do quarterly or when there is a critical security problem).
You can often resolve installations by running a repair. In the windows which is done either from help > repair or the control panel. I don't know the equivalent of the control panel in the Mac.
In any case I am happy that you fixed it.
-
* Original title: 513 CAPI2 event
Hello. We receive an error in the Event Viewer indicating event 513, CAPI2 that contains:
Cryptographic services failed during the processing of the OnIdentity() call in the System Writer object.Details:
TraverseDir: Impossible to push the subdirectory.System error:
Unspecified errorHere are the details:
-
-
513
0
2
0
0
0 x 80000000000000
1039076
Application
KFI - SBS.kfi.local
-
Details: TraverseDir: impossible to push the subdirectory. System error: unspecified error
We did most of the procedures here as well as the patch that has not worked since our server is a Windows Server 2008 SP2. What else can be done so that we can solve the problem of System Writer. Thank you.
Hello
Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.
http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer
See you soon.
Maybe you are looking for
-
How can I fix a Firefox dead?
Since my last update of Firefox I couldn't run Firefox. In fact, I can't do anything with it! Impossible to uninstall, reinstall, nothing. When I try to open Firefox, I just get a sound error. I read through many if solutions and no work. I cannot op
-
My laptop does not recognize the HDMI cable
I don't know if I posted this properly, but I would really like for you to tell me a little more about HP pavilion 1 TB of hard drives. I bought a HP Pavilion processor with ADM 1 to less than a year ago. There was whisky spilled on it a couple of mo
-
Issue with GetCompName() function;
I am having trouble when trying to use the CVI in 2013. in the main routine, I have included the hearder to the GetCompName() file. #include "toolbox.h". set the variable with Char [MAX_COMPNAME_LEN] ComputerName; and in Main.c, I just put GetCompNam
-
Dell 8250 had a 80 GB hd. Hard drive crashed couldn't find that 80 GB installed 320. Windows xp will not be installed. BIOS indicates a correct size, score watch shows the correct size. Get this file not copied. This happens on most of the files. C
-
WRT1900AC is capable of 100 / 100 Mbit/s speed wide band?
I'm looking for a new router to connect to my cable modem. In my research, I found the Linksys WRT1900AC. What I can't find in the specifications, is the flow. Can someone tell me what I can I wait for a download speed of the Internet (debit) with no