all applications

Similar Questions

• I replaced my original Apple Watch with a watch of S2. When I install and associate the new shows, is there a way I can restore all applications, configuration information and data of the original of the new shows so I don't have to start from scratch?

  I replaced my original Apple Watch with a watch of S2. When I install and associate the new watch and my iPhone 7 more, is there any way I can restore all applications, configuration info and data between the original and the new shows, so I don't have to start from scratch?

  Try this procedure

  Cancel the twinning of your iPhone - Apple and Apple Watch Support

  Spend your Apple Watch a new iPhone - Apple Support

• One volume for all applications

  Is there a way to define the Air iPad for a volume for all applications?  When I go into the music and YouTube, it seems
  always change and increase the volume.

  Thanks in advance.

  Hello. In fact change such volume indicated by the slider in the control center? Swipe up then left to see. I think that maybe it's just that the music is stronger, more deeply modulated. Not much you can do about it.

• The touchpad scrolling works on all applications (including IE) but not in Firefox - Win 10

  My touchpad scroll does not work in Firefox. It works great with IE and other applications (Windows 10).

  If it was a driver issue - I think that this would not work in all applications, but it works fine everywhere (except Firefox)

  I can operate for a short period, if I uninstall the Touchpad (in Device Manager), restart, re - installed.

  Again, hard to believe it would be a driver problem - works fine in all applications, except Firefox...

  He stares at me

  http://dellwindowsreinstallationguide.com/Dell-touchpad-drivers/

• Remove all applications, but not the settings

  I would like to delete applications off iPad to my kids, but keep the settings. As a result of bad choices, they lost the use of the device for a month with the exception of a few applications of education. Because the device has more than 200 applications, I'm trying to understand if there is a relatively easy way to remove all applications (I can reload education ones), but all the settings I have for the device. I backed up the iPad and thought that I could restore all applications after their months of purgatory. Any ideas or suggestions on how to do it quickly?

  No, there is not. Unless you're willing to wipe both parameters, applications will have to be deleted individually. However, with 200 apps, it could be easier to wipe and reintroduce the parameters.

• A method to stop all applications at once

  Quit all open applications.

  I came across a thread where someone wanted to know whether all applications should be closed before that the mac is stopped.

  During the debate, someone else asked why it is not possible to close all applications at once.

  I remembered reading that can be a solution for this with Automator easily.

  This is how a very simple tool to stop applications open with Automator (in the Applications folder).

  Here's how:

  -Open the Automator application,

  

  -Choose Create a new "application."

  

  -in the search box type 'Quit', then drag the "Exit all Applications" option on the right side.

  

  -You can set applications to ask save changes or not

  

  -Save the workflow as an application and name it for example "quit all."

  

  -I put in Applications, but it will run everywhere,

  

  It works as a standalone application and it is very fast.

  You can change the icon of the application according to the standard method:

  -Select quit all, and then select an icon that you want to quit, all for the two "get Info."

  -Select the icon, copy in the menu.

  -then click on the new "app" icon and paste it in the menu.

  

  -See it translate.

  

  (Note: I found this quit all icon somewhere in the internet).

  Lexiepex wrote:

  Quit all open applications.

  I came across a thread where someone wanted to know whether all applications should be closed before that the mac is stopped.

  My experience is that it is not always necessary - is is counterproductive. "Compression of memory" the new OS X manages memory and apps very effectively.

  'Compression of memory's a triple play... It is a performance gain; Compress and decompress data in RAM is much faster than reading and writing on the disc, even an SSD. It is a victory of energy; less time spent to transfer data between RAM and disk, more time that the system can pass in its idle state. And finally, it is a victory of capacity; ... can handle loads of work much more demanding than previous versions of Mac OS X.

  By closing the Mac, it's much faster if you leave the operating system take care of closing down all applications and reopen all the apps on reboot.

  

  In this way, you can pick up where you left off in record time.

  MacBook Pro (15-inch mid-2012), OS X El Capitan (10.11.5), i7 480 GB SSD 16 GB RAM iPhone5 iOS9.3.2, Parallels10.0.2, HP OfficeJet Pro 8620

• When implementing my new iPhone, I logged into my old iCloud instead of choosing "set up as new iPhone" is there a way I can do this again? All my news from icloud is on my phone. All applications that I never downloaded and every pic ive taken. I don't w

  When implementing my new iPhone, I logged into my old iCloud instead of choosing "set up as new iPhone" is there a way I can do this again? All my news from iCloud is on my phone. All applications that I never downloaded all the photos I've ever taken since 2005 and I want to restart without remove ALL account iCloud himself. I always want to do a backup, I don't want it on my phone. I want to start fresh on my phone, but I tried to reset my phone under settings. I have just reset settings that did not 'you can't cancel it "because I don't want to lose all the photos I've ever taken." I always want to iCloud saving it just in case I need it someday, but I don't want any of this on my phone. I tried all means of security who do not say "you can't cancel" I still images and apps on my phone.

  Hello

  Turn off find my iPhone in settings then restore the iphone to factory settings.

  Now configure iphone as a new iPhone.

  See you soon

  Brian

• Is there a way to get a list of all applications / updates that are cached on your server?

  Is there a way to get a list of all applications / updates that are cached on your server?  Of course, we see the space that contains each category.  But I would like a detailed list of the individual items that are actually cached.

  ITD be even better if I could get a scoreboard that showed me how many times a particular point was served to customers.

  Yes.  But you need a little magic Terminal to get the desired data.  Caching server is managed by a sqlite database.  To examine the contents, follow these basic steps:

  1: connect to the database using the following command:

  sudo sqlite3 /Library/Server/Caching/Data/AssetInfo.db

  2: to structure the data, run these two commands to the sqlite command-line prompt:

  .blog column

  . Headers on

  3: to find everything that is stored, run this command (you'll get iCloud cached documents, books, iOS apps, etc.):

  Select * from ZASSET;

  4: to narrow the results down to elements called by software updates, try this:

  Select * from ZASSET where ZURI as "content %";

  You could get a line that looks similar to the following:

  403 2 6 0 2012986793 474949928.477396 476912032.644505 e03448847909547fb8c7d4ecd5a7b6dd FAB32A72-DE33-469D-A7DF-3CE1A1F9A4D2 on Wednesday, August 5, 2015 18:00:30 GMT

  / Content/downloads/42/44/031-30888/bhrkylcnycxmtug9daw3g4magqb7dl7hba/OSXUpdComb o10.1

  (added the newline for readability)

  It is an OS X Combo update.  It is located on the drive to library/server/cache/Data/FAB32A72-DE33-469D-A7DF-3CE1A1F9A4D2 / the file is probably named 0, but if you want to use it, just add at the end of the .pkg file.

  I hope this helps.  Put server cache saves a lot of data.

  Oh, to quit the sqlite command line tool, simply type .quit and press return.

  Reid

  Apple Consultants Network

  Author - "El Capitan Server - Foundation Services.

  Author - "El Capitan Server - Collaboration & control»

  Author - "El Capitan Server - Advanced Services '.

  : IBooks exclusively available in Apple store

• 10.11.3 Update - All Applications Gone - Safe boot so OSX

  10.11.3 installed from the Mac Store this morning, that's my story if someone's looking for a similar situation.

  MacBook Pro retina 15 inch - end of 2013, 1 TB SSD, 16 GB Ram, i7 2.3

  I'm running FileVault and ran Clam AV.

  In my view, that the important issue is the claim AV based on the reviews I found in a few newspaper articles.

  Apparently, some suites AV fought this update during the installation.

  I can't even open the app console right now to review my console logs to check AV made a decision.

  After the installation/reboot, I was able to connect to my local account very well.

  But then everything was slow.

  GeekTool has not loaded

  Docking station came minutes later vs normal 30 to 60 seconds.

  All the dock icons had the missing picture of demand.

  I could open Finder after a period of waiting to die beach ball.

  There, I saw the mail.app with a bad icon image.

  The Utilities folder, but no applications listed.

  My home folder however, dropbox, ect still showed as populated... So at least my files are intact.

  After reading a few other reviews I started safely bootdownloaded the patch manually...

  And tried to do a manual install with AV OFF... This isn't launch... b/c all applications are dead...

  Still no love on reboot.

  I may be a brick machine here, I just wanted to share my story.

  Display of images in one second.

  http://imgur.com/a/slXMa

  photos

  

  

• Is there a way to "minimize all" applications to see the desktop?

  Is there a way to "minimize all" applications to see the desktop. I can do this on a Windows PC using WindowsButton + M.

  

• Spinning wheel of death, all applications!

  Since yesterday my desktop Mac is very slow and showing the spinning wheel in absolutely all applications I use.

  I run OnyX, did a scan complete McAfee, rebooted and came back a month using time machine and yet nothing made a difference.

  I have limited capabilities with computers but you can follow instructions well.  I hope someone here can point me in the right sense to be able to deal with the issue.

  Everything you need to know, please ask away and I'll try my best to provide you with information.

  Try restarting your Mac.

  Try to start:

  -Stop your Mac

  -Wait until your computer turns off and after that press the power button

  -Just after you hear the startup tone, press in and hold the SHIFT key

  -Release the SHIFT key when you see a gray Apple sign and the progress under this sign bar

  -Once your Mac boot, restart dhcpd as you usually do.

  If this does not help, follow the instructions below:

  -Stop your Mac

  -Wait until your computer turns off and after that press the power button

  -Just after you hear the startup tone, press in and hold the SHIFT key

  -Release the SHIFT key when you see a gray Apple sign and the progress under this sign bar

  -Once you see office, start a scan Disk Utility to detect and repair file system errors (remember to choose your primary hard drive)

  -Click on the disc to check, then, if requested to solve the problems on the repair disk

  -After that click on verify disk permissions, and then click Repair disk permissions

  -Once the process is complete, stop your Mac and turn it on again after 30 seconds

  Apart from this, take a look at this article from Apple and follow the instructions to reset NVRAM shown here:How to reset the NVRAM on your Mac - Apple Support

  Try resetting the system management controller: https://support.apple.com/en-us/HT201295

  Run this test and post the results here.

  http://www.etresoft.com/etrecheck

• Using the search button in all applications crashes Homescreen App

  I'll just my Razr Maxx Droid two days ago, and after installing some apps, I tried searching in the applications screen. An error message pops up saying the app Homescreen (process com. Motorola.Home) has stopped unexpectedly. Please try again. and then the home screen restarts and everything works except in all applications. Any suggestions?

  Try to uninstall the last update for Google Search...

• My Windows XP start up of page and all applications (such as my e-mail address) are stretched horizontally

  My Windows XP start up of page and all applications (such as my e-mail address) are stretched horizontally.  I tried to go into the properties of my Start Page tab and ' reset '.  After the computer restarts, no changes took place.  What should I do?

  Hi Donald,.

  You can try the following steps and check if it helps.

  a. right click on the taskbar and make sure it is not locked
  b it is locked, unlock it by selecting ' lock the taskbar"(it should be disabled).
  c.When it is unlocked, a click and everything always it just drag your mouse to the bottom of your screen

  You can read the following article and check:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/win_tray_taskbar_lock_howto.mspx?mfr=true

  You can also read the following article and check.

  How to move the taskbar from its default position Windows or put it back to its default position

• Often lose ALL copy and paste function in all applications

  Often, I lose all copy/cut & paste functions in all applications (not just Office programs). None of the buttons are gray; all functions are available, and I get no error message...  The function stops working when all methods: menus in right-click of the mouse, help on keyboard shortcuts screen and buttons.

  Only remedy was a full reboot, which works most of the time, but is a huge disadvantage because of the frequency with which this happens (4 to 6 times a week, sometimes several times a day).

  You can always just left click and drag to highlight and right-click the highlighted area and select copy from the menu drop-down and then go to the page where you want to paste in the box on left click and right click the GET the drop down and select Paste in it.

• When using my computer, all applications and the windows are closed at the same time, got disconnected and the computer turns off as if someone stops manually.

  Original title: it's a virus that's causing this?

  It happened a few times now. While I use my computer, all applications and the windows are closed at the same time, I am disconnected and the computer is off, as if someone manually stops the computer. I turn on the computer and log in and everything seems to be okay. No data deleted, not that I could find and detect anyway. One day when I turned on the computer, it run chkdsk before doing the usual startup. I use the computer for 2 years and this is the first time, she never did a chkdsk on its own. I used Microsoft Essentials and no viruses were found.

  Should I worry?

  Hello

  You can read the following article and try to download the Microsoft Safety Scanner and perform a full scan on your computer and check.

  Microsoft safety scanner

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Check if there are logs of events related to the issue in the event viewer which may help us to solve the problem of the:

  What are the information contained in the logs of the event (Event Viewer)?

• Speakers stereo mod for ALL applications and sounds

  Sony Hi community,

  I want to ask you if there is a mod without root using the speakers of my Xperia Z2 on stereo for all applications, calls and sounds (System and not system).

  I found very bad that Sony didn't optimize Android 5 this feature because speakers of the Xperia Z2 are beautiful and functional, better than the Z3, but without stereo output are very limited and potential of this smartphone!

  The stereo speakers of Xperia are one of the design features LARGE and the BEST against all THE Samsung and Apple devices, so I don't understand why they use stereo Sony to give us a powerful and especially audio output COMPLETE

  I hope in a future implementation of this setting in the next firmware update, but now I haapy even if there is a mod sostitutive to force them to use stereo speakers for ALL o.

  All responses are welcome for me!

  See you soon

  Alessio_84

  The mod that I use currently uses two speakers for everything except the speaker, but that's because I use an older version (the mod has since been updated to include the speaker, but since I got back from vacation early this morning, I got a chance to further improve). I intend to give it a try later tonight.

  Unfortunately, it requires root. The good thing is that you do not need to unlock your bootloader to root the device, so don't lose your drm keys.

  Here is a link to the thread:
  http://Forum.xda-developers.com/showthread.php?p=60337177