All calls fail

Similar Questions

• All calls fail, same echo

  All received calls fail, all outbound calls fail. Have uninstalled/reinstalled. Are connected to other Skype accounts on the phone. It's an iPhone 5 with the latest iOS. This problem has been several months and I can't understand it. Could someone help? Thank you!

  Support cat has been able to help me! Enter Skype in a chat window and type /remotelogout and send the cat. I am now able to make calls and receive them.

• iPhone more outgoing 6s "Call Failed" error - network Airtel

  Recently, I brought the iPhone 6 s more than the United States and use it in India Airtel network. Since the last 1 week or two, I guess that since the time he had an update iOS 9.2.1 I started to have this "Call Failed" error whenever I tried to make outgoing calls. This happens all the time, but sometimes only. When it happens that he does not make outgoing calls for at least an hour or more. Ultimately some how outgoing calls start working again on its own sometimes and sometimes it starts to work 10 minutes after the function "reset all settings". I checked with Airtel carrier several times and they have confirmed that no problem with the network. I put Airtel myself another SIM card in the iPhone, and even this sim did not work during down time. At the same time, I put my sim card into another Android phone, and it works perfectly without a sim card. This leads me to believe that there is a problem with the hardware/software phone itself and not any problem with the carrier. Anyone had any permanent resolution of these intermittent failures?

  Try resetting your device. This will not erase your data stored on that device.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

  Restore your device to factory settings. Please note that this will delete the data on your device.

  Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

  If these steps do not work, contact Apple and ask for help. Maybe it's a hardware problem.

  https://www.Apple.com/support/iPhone/contact/

• intermittent connection problem: 'the user profile Service service has no logon. The remote procedure call failed and did not execute. »

  Hello, I'm having intermittent problems with logging in my Windows 7 computer.

  Often after reboot due to applications of Windows Update or any simply restart after the holidays, I have the following message on trying to connect:

  "The service user profile Service has no logon. The remote procedure call failed and did not execute. "

  When I click 'OK', the machine disconnects and try to restart.  This can occur 2 to 5 times before _works_ .  But sometimes it happens at all.  And sometimes he _partially_ connects, but my "reminder" and the "Sidebar Gadgets' not loading not correctly and I get a different RPC error - for example, I lived once a message RPC over Skype cannot work because the remote procedure call failed.

  I'm fairly certain that it is different from the frequently reported issue 'profile of corruption', which was experienced by others.  This problem manifests itself as 'the user profile Service does not log. The user profile could not be loaded "and is reported as a blocking problem consistently reproducible which is set by the 'fixing' of the profile.

  However, the issue I feel is clearly related to an RPC problem is intermittent and not consistent - maybe one of my devices is not reset properly?  Where I can look in the logs of Windows, to provide relevant information on this subject?

  Because my computer was still under warranty, I have raised the issue of Dell and they removed the damaged system file (user account) last week.

  I hope that this will finally fix the problem (previously the error message disappear and reappear after a few weeks later.)  I'll give it a few more weeks to be sure.

• Receive "remote procedure call failed and did not execute" on several files or folders

  I get this error message when you try to open all folders ".  That is to say - 'profile by default', default, computer, administrator and three records under my name.  Also when I try to open the Control Panel, I get...: {26EE0668-A00A-44D7-9371-BEB064C98683} \0 "remote procedure call failed and did not run".

  This leaves me no way to even check the status of all.  Does anyone know why I get this message? And more important still, how can I solve this problem?

  I guess maybe I should say that I have not tried to restart my PC.  I will try that next. But, even if the issues go away, I would really like to hear what caused it.

  Thank you

  Barb Morris

  For memory than usually Service error RPC does not work, but it should always be running and takes an extra effort to stop it if something went haywire somewhere.

  If the Service or the system is not afflicted in other cases restart is a good first move.

  Your mistake could have resembled these examples from my notes:

  

  

• "search query: = services the remote procedure call failed and did not run".

  My computer crashed two days ago and I'm finally home, but whenever I try to open a window of any folder I keep refusing. In particular the main computer folder. One of the error messages I got is the following:

  search query: = services the remote procedure call failed and did not run

  Followed by this one:

  The remote procedure call failed and did not execute.

  I opened the Task Manager and tried to access the services from there, but whenever I do, the Task Manager window freezes.

  How can I fix it, my computer is so slow running and does hardly anything and guard with all freezing orders that I try.

  Hello

  This error generally, if the system is infected with Virus and malware or system files are corrupt.

  Please, try the methods below and check if the problem persists.

  SFC scanner.

  You can read the following Microsoft article to repair corrupted using SFC tool files. Use the System File Checker tool to repair missing or corrupted system files

  Reference: http://support.Microsoft.com/kb/929833/en-us

  If the problem persists, try a run Microsoft Safety Scanner.

  http://definitionupdates.Microsoft.com/download/definitionupdates/safetyscanner/amd64/msert.exe

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Important: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Do try the suggestions above and let us know the results.

• Not able to connect to Windows 7-"the remote procedure call failed."

  Hello

  Windows never lets an opportunity to prevent the user. I have problems on my lappy staff & problem appeared all of a sudden.

  When I got the system starts, it of not connection & throws the error message "the remote procedure call failed." What ever I do it is not the same error.

  I tried logging in safe mode but is not connect in SafeMode survey the same error.

  Tried to restore to the last successful boot. Same mistake.

  Really frustrating.

  Looks like only option I have is to format the lappy however I have a lot of data in C:\ which are not saved.

  Any help will be much appreciated.

  Kind regards

  Vigni

  I have a lot of data in C:\ which are not saved.

  Unfortunately, it seems that you belong to the large class of PC users who choose not to back up important data, until disaster strikes. Your data is not lost, but the recovery is much more painful than to use an external backup drive. Here are a few options:

  • If it is a desktop PC: connect the hard drive to some other desktop PC, then recover your data.
  • If it is a laptop: remove the hard drive, then put it in a box for disk 2.5 "USB. You can now connect this case for some other PC and recover your data.
  • Start the computer with a bootable Ubuntu CD and its graphic interface allows you to save your files on an external storage device.

  When you are finished, you get a HDD 2.5 "USB and use it for your regular backups (e.g. weekly). You can also store an image of your new installation, you save the trouble of the reconstruction of Windows where you have another accident.

• History of EX60 using redial missed call fails

  All,

  I have a scenario where I have a (home network) VCS-E <-> <->VCS - C <->EX60 EX60. We have MSDS, the two units registered, if I dial e164 of external or internal device call is successful, BUT if the external unit lack an inner calling and I try to use the history tab and call the internal unit, my call fails. Here's what the I see in the VCS-E. The VCS - C is below as well (I removed ome IP and information area)

  VCS-E

  2013 09-13 T 11: 20:26 - 05:00 tvcs: event = "Call rejected" Service = "SIP" Src - ip = 'external users IP' Src-port = "55448" CBC-alias-type = Src-alias "SIP" = "sip:[email protected] / * /" Dst-alias-type = "SIP" Dst-alias = "sip:[email protected] / * /Tag"Call-serial-number="5a259a0e-1c90-11e3-b878-0050568000d1" = "5a259bd0-1c90-11e3-a19e-0050568000d1" detail = 'Temporarily unavailable' Protocol = "TLS" response code "480" = Level = '1' elements UTCTime = "2013-09-13 16:20:26, 897" "

  "2013 09-13 T 11: 20:26 - 05:00 tvcs: event = 'search completed" reason = "Temporarily unavailable" Service = "SIP" type-aliases-Src = Src-alias "SIP" = "[email protected] / * /"Dst-alias-type = "SIP" Dst-alias ="sip:[email protected] / * /Tag"Call-serial-number="5a259a0e-1c90-11e3-b878-0050568000d1" = "5a259bd0-1c90-11e3-a19e-0050568000d1" detail = "" found: false searchtype:INVITE, ' Level = '1' elements UTCTime = "2013-09-13 16:20:26, 897" "

  2013 09-13 T 11: 20:06 - 05:00 tvcs: Event = Service "Call tried" = "SIP" Src - ip = "IP Address of external users" Src-port = "55448" CBC-alias-type = Src-alias "SIP" = "sip:[email protected] / * /" Dst-alias-type = Dst-alias "SIP" = "sip:[email protected] / * /Tag"Call-serial-number="5a259a0e-1c90-11e3-b878-0050568000d1" = "5a259bd0-1c90-11e3-a19e-0050568000d1" Protocol = "TLS" Auth = 'YES' level = '1' elements UTCTime = "2013-09-13 16:20:06, 456" "

  "2013 09-13 T 11: 20:06 - 05:00 tvcs: Event = 'attempt of search" Service = "SIP" type-aliases-Src = Src-alias "SIP" = "[email protected] / * /"Dst-alias-type = Dst-alias "SIP" ="sip:[email protected] / * /"Call-serial-number="5a259a0e-1c90-11e3-b878-0050568000d1" Tag = "5a259bd0-1c90-11e3-a19e-0050568000d1" details = "searchtype:INVITE" level = "1" elements UTCTime = "2013-09-13 16:20:06, 455'"

  VCS - C

  "2013 09-13 T 11: 21:29 - 05:00 tvcs: event ="Call rejected"Service ="H323"Src - ip = 'internal IP address' Src-port ="2776"CBC-alias-type ="H323"CBC-alias ="[email protected] / * /"CBC-alias-type ="E164"CBC-alias ="6666"Dst-alias-type ="H323"Dst-alias ='[email protected] / * /"Call-serial-number="855035a4-1c90-11e3-9ec1-0050568000c5" Tag = "7f42aade-1c90-11e3-865f-0050568000d1" Protocol = "TCP" code-response = "Temporarily unavailable" level = '1' elements UTCTime = "2013-09-13 16:21:29, 044" "

  "2013 09-13 T 11: 21:29 - 05:00 tvcs: Event = 'search completed" reason = "Temporarily unavailable" Service = "H323" CBC-alias-type = "H323" CBC-alias = "[email protected] / * /" Src-alias-type = "E164" CBC-alias = "6666" Dst-alias-type = "H323" Dst-alias ="[email protected] / * /Tag"Call-serial-number="855035a4-1c90-11e3-9ec1-0050568000c5" = "7f42aade-1c90-11e3-865f-0050568000d1" detail = "" found: false searchtype:Setup, ' Level = '1' elements UTCTime = "2013-09-13 16:21:29, 043" "

  "2013 09-13 T 11: 21:18 - 05:00 tvcs: event ="Attempt of search"Service ="H323"type-aliases-Src ="H323"CBC-alias ="[email protected] / * /"type-aliases-Src ="E164"CBC-alias ="6666"Dst-alias-type ="H323"Dst-alias ="[email protected] / * /"Call-serial-number="855035a4-1c90-11e3-9ec1-0050568000c5"Tag ="7f42aade-1c90-11e3-865f-0050568000d1"details ="searchtype:Setup"level ="1"= UTCTime elements"2013-09-13 16:21:18, 944""

  "2013 09-13 T 11: 21:18 - 05:00 tvcs: Event = Service"Call tried"="H323"Src - ip = 'internal IP address' Src-port ="2776"CBC-alias-type ="H323"CBC-alias ="[email protected] / * /"CBC-alias-type ="E164"CBC-alias ="6666"Dst-alias-type ="H323"Dst-alias ='[email protected] / * /"Call-serial-number="855035a4-1c90-11e3-9ec1-0050568000c5" Tag = "7f42aade-1c90-11e3-865f-0050568000d1" Protocol = "TCP" Auth = "YES" level = "1" = UTCTime elements "2013-09-13 16:21:18, 943" "

  "2013 09-13 T 11: 21:18 - 05:00 tvcs: event ="Research Service completed "="H323"CBC-alias-type ="H323"CBC-alias ="[email protected] / * /"Dst-alias-type ="H323"Dst-alias ="[email protected] / * /Tag "Call-serial-number="855035a4-1c90-11e3-9ec1-0050568000c5"="7f42aade-1c90-11e3-865f-0050568000d1"detail =" "found: true, searchtype:LRQ ' routed call = 'YES' level = '1' elements UTCTime =" 2013-09-13 16:21:18, 923""

  "2013 09-13 T 11: 21:18 - 05:00 tvcs: Event ="Attempt to search"Service ="H323"CBC-alias-type ="H323"CBC-alias ="[email protected] / * /"Dst-alias-type ="H323"Dst-alias ="[email protected] / * /"Call-serial-number="855035a4-1c90-11e3-9ec1-0050568000c5"Tag ="7f42aade-1c90-11e3-865f-0050568000d1"details ="searchtype:LRQ"level ="1"= UTCTime elements '2013-09-13 16:21:18, 875'"

  Because I'm fairly new troubleshooting these untis, I did not enter all other newspapers. It almost seems that I have problems with SIP to H323 calls. I continue to dig, but I was wondering if one of you could point me in the right direction.

  Thank you

  Greg

  A few additional remarks.

  * Please describe your deployment a little better (network and telepresene config... (also understood what Paulo asked).

  * have you bandwidth restrictions, by default the links, call policies or other things up?

  * Happens all the time or random / sometimes it works /...?

  * Looks like the return call was a sip call. Is the intention, which was calling returend origin, now

  What is the default call protocoll endpoint and progress areas correctly?

  * If you use the e164 numbers and only the vcs I would use either h323 as the default calling Protocol

  or see you get enum upward and running though a call can stay in the Protocol, all the time.

  * have you checked that all the areas are properly?

  * No ALG / Inspection or other layer3 h323/sip stuff active?

  * Search rules ok?

  * all used identifications?

  * registration of endpoints ok?

  * using a cluster? We noticed a bug that is still present in X7.2.2 (even if it is said that it's been fixed).

  If the call to the number e a164 hits VCS where endpoint is NOT registered, the call will fail.

  It could thus help us to see some screenshots of the inscriptions and the search history and details of the search.

  Please remember useful frequency responses and identify useful or correct answers.

• The remote procedure call failed and did not run + user problem?

  Good so I have a Sony VAIO with Windows 7 Home Premium 64-bit, 4 GB RAM and 640 GB hard drive. During his first installation, VAIO asks you to name your computer so I called him "CARINA" and everything worked perfectly.

  However, we wanted to change the main username in the 'OSCAR', so I went to the control panel > users and this has changed. I thought that everything was great, because when I open the Start Menu, top-right, he says "OSCAR". After more research in the area of research, two things appears under the name 'CARINA': a 'user profile', I think, who had a small square color sky-blueish. and a folder with a lock on it. I tried clicking on the user 'CARINA' first profile, and it just opened what, in my view, is a Properties window 'CARINA '.

  But when I clicked on the folder "CARINA" with a lock, it opened my libraries. But get this: at the top, he said not "CARINA", but "OSCAR". I thought it was odd he did that so I told the computer to delete the folder with the lock named 'CARINA '. As soon as I realized it was a huge file and a gazillion files were there (real libraries), I canceled it, he wants to immediately restore the Recycle bin. But nothing appears on the trash, or I can't enter either because an error saying "the remote procedure call failed and did not execute".

  But the mistake has been made and now it does not work. The Start Menu appears, but I can't click on anything or use the search box. When I click on my library of records, the same message appears ("the remote procedure call failed and did not execute") or when I enter 'Open action center', he said ': {266EE0668-A00A-44D7-9371-BEB064C98683}\5\::{BB64F8A7-BEE7-4E1A-AB8D-7D8273F7FDB...» The remote procedure call failed and did not execute. " Programs on my toolbar work, such as Chrome or Windows Media, or I can change the volume with the icon in the lower right, but I can not enter in 'Computer', my libraries, or anything else. When I open the the TASK Manager, under processes, they are all under the name CARINA. If I stand on the top of the "explorer.exe" process, and I do a right-click on top of CARINA > properties > Security > there are 4 listed users:

  • SYSTEM
  • Administrators (CARINA-VAIO\Administrators)
  • Users (CARINA-VAIO\Users)
  • TrustedInstaller

  The computer has a backup (if I have a backup of an another VAIO Windows 7 Home Premium 64 - bit if necessary) and I'm afraid to stop in case it does not start again. :(

  Any help? What can I do?

  Hello

  Method 1:

  Follow the steps mentioned below.

  (a) type services in the start menu search box.

  (b) in Services, scroll down to "Remote Procedure Call", and make sure the status 'Started' and set to automatic.

  (c) the second "RPC Locator' must be set to"manual ".

  Method 2:

  I suggest you to scan SFC. Scan SFC will be scans all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833
  
  Note: I suggest you check manage user accounts to check how many user accounts are present.

  a. Click Start.
  b. go to the control panel.
  c. click user accounts and family safety, and click on user accounts.

  Check how many accounts user is present.

  Method 3:
  I suggest you to create the new user account and check if the problem persists.

  Create a user account
  http://Windows.Microsoft.com/en-in/Windows7/create-a-user-account

  If everything works well in the new user account, then I suggest you to transfer data and settings to the fixed aid corrupt profile.

  Difficulty of a corrupted user profile
  http://Windows.Microsoft.com/en-in/Windows7/fix-a-corrupted-user-profile

• Most Windows 8 Apps crashing. "The remote procedure call failed."

  I recently got a new Dell Inspiron 3520 with 8 Windows pre-installed, and I was put in place by installing it with some software that I use regularly as 7 - zip, Visual Studio 2012, Expression Studio 4 and office of 2013. It seems that after having installed with my PC and get the updates of Windows, most of the modern user interface / WinRT apps crash immediately after opening. This frustrated me as long as nothing was no indication of any errors. Then a light bulb hit me to check the Windows Event Viewer Logs and it is there are tons of errors related to...

  wwahost.exe, as the following error message

  The failing application name: wwahost.exe, version: 6.2.9200.16420, time stamp: 0x505a90d6

  Name of the failed module: KERNELBASE.dll, version: 6.2.9200.16451, time stamp: 0 x 50988950

  Exception code: 0 x 00000004

  Offset: 0x00014b32

  ID of the process failed: 0 x 268

  Start time of application vulnerabilities: 0x01cde8b7be9f707b

  The failing application path: C:\Windows\syswow64\wwahost.exe

  Path of the failing module: C:\Windows\SYSTEM32\KERNELBASE.dll

  Report ID: fc6fc011-54aa-11e2-be70-891f1931d402

  Failed package name: Microsoft.SkypeApp_1.3.0.112_x86__kzf8qxf38zg5c

  On a package of faults application ID: App

  - and -

  The modern user interface applications such as the following error

  Activation of the microsoft.windowsphotos_8wekyb3d8bbwe application! Microsoft.WindowsLive.ModernPhotos failed with the error: the remote procedure call failed. See the Microsoft-Windows-TWinUI/operational log for more information.

  To all the various mistakes, it seems that the App those always fail with the error: "the remote procedure call failed." and the exception wwahost.exe code is always 0 x 4. And the Windows store does not work either but as immersive control panel applications and camera app. I would be very grateful for the help thank you in advance for your time.

  Problem solved. I have graphics on this new machine. I've updated the driver for the graphics card and have not had an accident in three days.

• opening a get PDF "the remote procedure call failed."

  With the help of Windows 8 player get the error when you open a PDF file that worked earlier:

  "The remote procedure call failed."

  Hello

  Thanks for posting your query in Microsoft Community and my apologies for the late reply.

  It could have happened because settings in services. Follow these steps to manage the remote procedure call services.

  a. press the Windows key + R and type services.msc and press enter.

  b. in Services, scroll down to the remote procedure call and make sure the status is started and the type of State is automatic.

  c. now ensure that the status of named Remote procedure Call Locator service is set to Manual.

   

  I also suggest sfc/Scan of the computer. He could repair the corrupted system files. The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions. When the analysis is complete, the System File Checker tool indicates whether integrity violations were found. If integrity violations are detected, the System File Checker tool difficulty integrity violations. See the following article to do.

   

  Use the System File Checker tool to troubleshoot missing or corrupted on Windows Vista or Windows 7 system files

  Let us know the status of the issue. We would be happy to help you.

• Shop - "the remote procedure call failed."

  I can't win any entry in the windows store all I get is "the remote procedure call failed."

  Former title: cannot enter the store

  Hello

  Try the steps mentioned in this article and see if they help you:

  http://www.thewindowsclub.com/remote-procedure-call-failed-Windows-store-apps

  Hope this helps, good luck :)

• When you try to create the safety PIN or password photo, get the error "the remote procedure call failed."

  Logon to an account on the Win8 Pro system.  In the PC settings. Your account, try to create a PIN.  You will be asked your password, and when I enter the password, the tracking error.  "The remote procedure call failed."

  In the application event log, we see:

  The failing application name: CredentialUIBroker.exe, version: 6.2.9200.16384, time stamp: 0x5010a22d

  The failed module name: nvwgf2umx.dll, version: 9.18.13.1070, time stamp: 0x50b976f6

  Exception code: 0xc000041d

  Offset: 0 x 0000000000135122

  ID of the process failed: 0 x 1160

  Start time of application vulnerabilities: 0x01cddfd4b4a988ef

  The failing application path: C:\Windows\System32\CredentialUIBroker.exe

  Path of the failing module: C:\Windows\System32\nvwgf2umx.dll

  Report ID: fdf0d095-4bc7-11e2-be7a-e0cb4e8a55c5

  Faulting full name of the package:

  ID of the failed package-parent application:

  I did a search of exhaust gases and am not finding that anything related.

  Action taken:

  ran sfc/scannow and no reported problems.

  Need to stop the application to quit.

  I found the problem for the updated NVidia driver.  Once I disabled the display driver USB 3.0 that acts as a method to connect to a computer USB 3.0 (also tactile) monitor, the driver installed correctly and does not interfere with any of the Windows applications.
  Also, try to remove all the accounts on your system that are not user accounts that some applications will add them without apparent reason.  Applications still work correctly.  It's just less sure there to access your system.

• imitate the situation when the procedure call fails

  Hi all
  
  My need is to emulate the situation when the procedure call fails and I have an exception.
  How can I make it?

  You can use, RAISE_APPLICATION_ERROR to raise a custom exception, or you can create a situation where an exception will be raised-for example inserting duplicate data in a table with a uniqueness constraint, inserting data with an invalid foreign key, taking a tablespace offline, using too many characters in a string assignment... the list is long.

  Published by: Bravid on August 12, 2011 08:37
  typo

• SE JOLT_CAT:1043: "ERROR: tpacall(), tperrno = 6 call failed."

  Hello
  
  We had an isue with our tuxes where he was throwing below error messages.
  
  112356.Clipper! JSH.3280.1-2: JOLT_CAT:1043: "ERROR: tpacall(), tperrno = 6 call failed."
  112356.Clipper! JSH.3353.1-2: JOLT_CAT:1043: "ERROR: tpacall(), tperrno = 6 call failed."
  112356.Clipper! WSH.5820.1.0: WSNAT_CAT:1042: ERROR: tpcall() call failed, tperrno = 6
  112356.Clipper! JSH.3440.1-2: JOLT_CAT:1043: "ERROR: tpacall(), tperrno = 6 call failed."
  112356.Clipper! JSH.3224.1-2: JOLT_CAT:1043: "ERROR: tpacall(), tperrno = 6 call failed."
  112356.Clipper! JSH.3388.1-2: JOLT_CAT:1043: "ERROR: tpacall(), tperrno = 6 call failed."
  
  I've recycled the JSL and WSL services and then after all was ok, but could not figure out the cause of it.
  
  Has anyone got the above error messages.
  
  Rgds
  Sohail Khokhawala

  Hi Sohail,

  You can try setting TMULOGUSINGSERVICENAME = Y in the WSL or JSL environment to write the name of the service in the ULOG, then you can check if the service is OK in the tmadmin and the Jrepository.

  Sorry for my English...

  Kind regards