All devices supported by something.

Similar Questions

• No device supported in the DAQ assistant

  Hi all

  I use the scanner high speed (NI 5922). I installed Labview 8.5.1, then the software scope OR the digitizer NI 5922 high of speed, then the hardware driver. I tested the DAQmx with the MAX and it passes the test. But when I started to use the labview with the DAQ assistant, as described in the manuals I have not found all devices supported! Should I log a physical device to the hardware driver channels or what should I do?

  Thank you

  Ibrahim

  The 5922 is supported by NO-Scope http://www.ni.com/digitizers/software.htm and not by DAQmx. This page should help you get started.

• RIM provides support for developers to transfer their applications pre - BB7 BB7 all devices

  Hello

  I found that many apps are not taken in charge on BB7 and specifically all devices BB7 (all Touch 9860 is a good example).

  I was wondering if RIM has support specifically for all applications to the latest version of their OS?

  Thank you

  gajariam

  Signature for BBOS keys have not changed.  I use the same signature keys for 7 BONES I had OS 3.7 (yes I go too far back...).  So it's one excuse for not doing anything, not a reason for not supporting the 7 OS.

  The preferred for OS 7 development environment is Eclipse, which is the same as that used for Android.  If it's not really wash with me:

  "It does not help that the development environment and tools for the BlackBerry operating system legacy are spectacularly horrible"

  For the reasons that the developer of mango does no development work on BB goes down:

  (1) 99% of the population using the app run on Android

  (2) RIM give up the BlackBerry 10 platform.

  Any of these are 7 specific OS.

• Where can I get a list of all devices that support OS 5.0

  Hi all

  When you submit a request to the AppWorld, I wonder to select the supported devices. My applications work on any device with OS 5.0, but I can't find a list of all devices that support OS 5.0 (shipped with it or with option 5.0). Anyone knows where I can find such a list.

  Thank you

  Wolf

  Don't worry about this. Just select as minimum supported OS 5.0 version and after that select all possible devices. App World will correspond to devices, and the version of the OS, i.e. users with OS 5.0 devices will see your app while that those who have the lower version of the OS won't be able to see or to download your application.

• What happens if the PC I just downloaded Itunes on & connected to, does it display not all devices?

  What happens if the PC I just downloaded Itunes on & connected to, does it display not all devices?

  Hello 2sealadies!

  Thank you for joining the communities Support from Apple! Looks like you have a problem with your iTuens on Windows 10 not to recognize your iPhone. I know how important it is that the iPhone is recognized by iTunes. Read this article with steps If iTunes does not your iPad, iPhone or iPod. Specifically, after the first series of measures:

  If you are using a Windows PC

  1. Open Device Manager by following the steps for the version of Windows that you have:
     • Windows 10: Click the search box in the lower left corner, type Device Manager and press ENTER. In the list under Bus USB controllers, find the Apple Mobile Device USB Driver.
     • Windows 8: loose in the right edge of the screen. Press search and enter the Manager devices, and then click Device Manager. If requested, enter your password. In the list under Bus USB controllers, find the Apple Mobile Device USB Driver.
     • Windows 7: click on > Control Panel > system and Maintenance > Device Manager. If requested, enter your password. In the list under Bus USB controllers, find the Apple Mobile Device USB Driver.
  2. Even if you do not find the Apple driver, follow the steps below, based on what you see or don't see.

  The pilot and
  No symbols

  A down arrow
  by the driver

  Exclamation or
  question mark by
  the pilot

  No Apple Mobile
  USB device driver

  You don't see symbols next to the Apple Mobile Device USB Driver

  If you do not see , , or of the Apple Mobile Device USB Driver, look for third-party software conflicts. Then if you still need help, restart your Apple Mobile Device Service or contact Apple technical support.

  

  You see an arrow down

  If you see next to the Apple Mobile Device USB Driver, the driver with the right mouse button and choose enable from the context menu. Then if you still need help, contact contact Apple technical support.

  

  You see an exclamation point or question mark

  If you see or the Apple Mobile Device USB Driver, right click on the entry, then manually update the Apple Mobile Device USB driver.

  

  You do not see the Apple Mobile Device USB Driver

  1. Disconnect your device from your computer.
  2. Save a screenshot by pressing the Home button and sleep/wake button of the device button at the same time. The screen should Flash briefly.
  3. Reconnect your device to your computer.
  4. If you see one of these sections in the Device Manager, expand them:
     • Imaging devices
     • Other devices
     • Portable devices
     • USB Bus controllers

  Now, locate the entry that recognizes the device as a camera. You should see 'Apple IPhone', 'Apple iPad' or 'Apple iPod '. Right-click the device entry, and then manually update the Apple Mobile Device USB driver.

  If a single unknown device appears, follow these steps:

  1. Right click on the unknown device entry.
  2. Choose Properties from the context menu, and then click the Details tab.
  3. In the drop-down menu, select hardware IDS.
  4. If the ID begins with something other than USB\VID_0000 & PID_0000, go into the Device Manager and right click on the entry for device unknown, and then manually update the Apple Mobile Device USB driver.
  5. If the ID begins with USB\VID_0000 & PID_0000, then follow the remaining steps.
  6. Unplug the unit and remove all the USB devices on the computer.
  7. Shut down the computer, and then turn it back on.
  8. Reconnect the device, tests of each USB port for about 30 seconds to see if the device is recognized.
  9. Test with a different, checked 30-pins-USB or the lightning-connector-cable-USB, if they are available.

  If you still need help, contact Apple technical support.

  

  Manually update the Apple Mobile Device USB driver

  If one of the sections above directs you to this section, you should already have right click on an entry in the Device Manager. Now, follow these steps:

  1. Choose update driver software.
  2. Choose "Browse my computer for driver software."
  3. Choose "Let Me pick from a list of drivers for devices on my computer.
  
  
• Click the disk button. If this is not available, choose a category of devices such as Mobile phone or storage device, if in the list.
• Click Next. You should see the disk button.
• Click Browse and navigate to C:\Program Files\Common Apple Mobile Device Support\Drivers.
• Double-click the file "usbaapl. If you have a 64-bit version of Windows, this file will be called "usbaapl64". If you do not see here "usbaapl64" is not a Drivers folder, look in C:\Program Files (x 86) \Common Files\Apple\Mobile Device Support\Drivers.
• In the disc window, click Open, and then click Next and then click Finish.
• Windows installs the driver. If a message indicates that the software that you install "not passed the Windows Logo test", click on continue. You can get help with other common errors and the error code numbers in this Microsoft article.
• Open iTunes to make sure that iTunes recognizes your device. If not, Restart the Apple Mobile Device Service.

See you soon!

• iPad: pilot USB MTP / Apple Mobile Device Support Driver update failed - access denied

  Hi all

  I do iTunes/iPad/AMDS rerun (Win7 Ultimate 64 bit). After the last update of iTunes to 11.1, I'm not able to install the Apple Mobile Device Support any longer. Usbaapl64 installation fails. Even a manual update is not possible (access denied).

  Before you uninstall, the iPad has been recognized as Apple Mobile Device Support, but using the old version located in system32. Same result trying to update the driver manually - access denied. After you have uninstalled the ADM the iPad is recognized as Apple iPad to portable devices (in dev mgmt). Updating the driver (and selecting the usbaapl64 in CommonFiles/Apple/Apple Mobile Support folder) still fails - access denied.

  Even to disable UAC, using the account hidden administrator and start Windows in safe mode will not grant access. I have no idea what to do now. Is this a normal behavior or y at - it something very wrong in my system? I don't want to format my system.

  Thanks in advance.

  PS: Windows is up to date
  P.P.S.: Tried numerous solutions of Apple, articles, forums, google, re - install iTunes and what you have. Nothing has worked.

  I have it.

  Have a look in the newspaper of the setupapi.app.log and setupapi.dev.log C:\Windows\inf files I discovered that management installation program / unit was not able to create a temp folder in C:\Windows\System32\DriverStore and was not yet able to copy the files in C:\Windows\System32\DriverStore\FileRepository.

  After you change the access rights (gave me and SYSTEM full access), I was able to update the driver USB MTP driver Apple Mobile Device real Support. Later, I was able to install iTunes without any problems during the installation of the pilot AMDS.

  Took me only 4 days to the indicator with the search in the log files mentioned above-. -.

  See you soon.

• iMessages and texts appear not on all devices.

  I have a MacBook (2015 edition) an Apple Watch and an iPhone 6 more. The Mac running OS X El Capitan version 10.11.5.  The Watch works OS 2.2.1. My iPhone is running iOS 9.3.2. Text messages and iMessages do not display the entire conversation on each device. I can see what the sender, but it does not show my answers, even if the sender receives answers. I tested the message function by sending me a message, and I have not received a response.

  I chatted with Support from Apple, took all three devices in an Apple Store and talked to a technician, a senior technical and obtained a reference to an engineer. We can't solve this problem.

  All devices have been reset again. I signed repeatedly. All the Ts were crossed and nothing seems to fix this.

  I noticed that when I tried to turn the text transfer function, no verification code appeared on my MacBook, but it has never been a problem before, when it was not lit. I think that the fact that the dialog is the result of this problem, but I don't think that it is the cause.

  Can someone help me please!

  Please turn the phone off, or put it in airplane mode. IMessage now works on Mac?

• iCloud contacts do not sync on all devices

  can someone help me understand why iCloud contacts are not sync on all devices?  I confirmed that keep the changes via my macbook on the iCloud touch shows almost immediately changes on some devices, but not all.

  A comment interesting, devices do not receive the change are the same Member of the family.  so I can't assume it's a matter of iCloud.  I ran a backup restore on one of the devices affected with no resolution.

  I fear I am missing something so basic, but at this point, I am really puzzled.

  Thanks for all the ideas.

  So all the machines in question are signed on the same iCloud account, and they have all Contacts enabled in settings > iCloud?

  If so, what is the level of iOS and the model of the device that is not synchronized? What is model level and iOS, other devices?

  See you soon,.

  GB

• After freaked out power, my mouse pointer is frozen on the top left of my screen. I disconnected all devices and it is still frozen

  After that my electricity freaked out when I try to restart the computer, the mouse pointer is frozen in the upper left corner of the screen. I rebooted several times and it is still stuck. I also unplugged all devices. Any suggestions?

  Boot safe mode and test.

  https://support.Apple.com/kb/PH21875?locale=en_US

• iMessage do not synchronize with all devices

  I use iMessage on multiple devices and does not know how to manage my messages so that when I delete a message from a device, this message removes all devices.  I spent too much time, manually remove the flow of messages from different devices.  Why it does not work as an imap email account?  Or did I miss something...

  Messages does not work as an IMAP account.

  Send feedback to Apple. They will not respond, but at least know that there is a problem. If enough people send feedback, it can become the problem solved as soon as possible.

  Your comments

• Windows XP sp3 has suddenly stopped show all devices in Device Manager.

  Found problem when I couldn't put any printer online or can I install a new device. Everything else seems OK with a USB hard drive and modem works fine. Queue Pinter seems to have several printing with no name, but all around 34 bytes which keep coming back when removed.

  Hello

  1. you receive an error message when you access the Device Manager?

  2 have you made changes on the computer before this problem?

  3. What is the brand and model of the printer?

  Method 1:

  Follow the articles and check them out below:

  Device Manager does not display devices that are not connected to the Windows XP-based computer

  http://support.Microsoft.com/kb/315539

  Download the update and check:

  Device Manager may not show that all devices and network connections may not display network connections after installing Windows XP Service Pack 3 (SP3)

  http://support.Microsoft.com/kb/953979

  Method 2:

  Assessment of problem printer if the Printer Spooler service is running.

  Step 1.

  You can start the print spooler by using the following procedure:

  a. in the Administrative Tools folder (click Start, then Control Panel, then system and Maintenance and then Administrative Tools), open the Services snap-in.

  b. Locate the print spooler service in the services list and confirm that the status is started. If this is not the case, select the service, and on the Action menu, click Start.

  You can also do this from an elevated command prompt window (right click on prompt in the start menu and click Run as administrator) by typing the following command: net stop spooler & net start spooler

  (It of actually two commands, "Net stop spooler" and "Net start spooler", came at the same time for that process control Windows both, one after the other).

  Step 2.

  To start the dependencies for the print spooler service, follow these steps:

  a. in Services, right-click on print spooler and then click Properties.

  b. click the Dependencies tab. The first box list all system services that must work for the print spooler start. These are dependencies.

  c. take note of each service, click OK, and then restart each service on which the print spooler is dependent, if the service is not already started. If a service is not started, right-click, click Properties, and then make sure that the startup type is automatic.

  Reference: http://support.microsoft.com/kb/946737

  Printer in Windows problems: http://windows.microsoft.com/en-us/windows/help/printer-problems-in-windows

  Hope the above information is helpful.

• New hard drive mounted, didn't save lost all devices sony and Microsoft word. Still have the product that was supplied with the laptop key. Can I get this without having to buy new?

  VAIO laptop

  New hard drive mounted, didn't save lost all devices sony and Microsoft word. Still have the product that was supplied with the laptop key. Can I get this without having to buy new?

  To restore the software preinstalled on the computer, or to install disks:

  Contact the OEM computer manufacturer and ask them to send you an installation to your computer disk - they may charge a small fee. Contact information for the manufacturer of your computer can be found here:

  http://support.Microsoft.com/GP/oemphone/

  Sony support:
  http://eSupport.Sony.com/

• Do a clean install on a Dell Inspiron 1525 with Vista... The Device Manager has a yellow labels on all devices under 'other devices '... Unable to connect to the Net

  I did a clean install on a Dell Inspiron 1525 with Vista Home Premium... I can't connect to Internet... The Device Manager has a yellow labels on all devices under "other devices" that includes network and ethernet controllers... Yet the utility on the Drivers and Utilities CD Dell program says that there is a "Marvel 88E80XX rev A01 10/100 ethernet controller" responsible... HELP :)

  Hello

  Use another computer to download and save the drivers to

  copy them to the flash drive and transfer them like that

  Here is the link to the drivers for your model

  http://support.Dell.com/support/downloads/DriversList.aspx?c=us&l=en&s=Gen&OS=WLH&OSL=en&SystemID=INS_PNT_PM_1525&CATID=-1&impid=-1

  to get help in this matter

  Dell support

  http://support.Dell.com/

  Dell support forums

  http://en.community.Dell.com/support-forums/default.aspx

• Hello.. I justwant to know, what are mobile devices supported by the Blackberry 5.0.4 Server? ...

  Hello..   I justwant to know, what are mobile devices supported by the Blackberry 5.0.4 Server?  ...

  is BES 5.0.4 supports veterans and the latest devices?

  Someone please help.

  BES 5 supports all devices that are not run BB10. This includes any device running OS 7.1 or lower (e.g. 99xx 98xx, 97xx, 96xx, 93xx, 92xx, 9000, 91xx, 95xx, 87xx, 88xx, 89xx, etc..)

  BB10 devices require a BES or higher to 10.

• Problem with Apple Mobile Device Support in Windows 7

  I can't install Apple Mobile Device support.

  I uninstalled all the components of iTunes, in the order suggested by the apple support.

  Apple Mobile Device support is not there - it does not appear as a program to uninstall; There no folders or files in Program Files (x 86) for her.

  iTunes works, but when I try to connect an iPad or an iPod, he said simply that the amendments are expired, uninstall and reinstall (actually that is not there, and still less to day).

  Then, when I try to reinstall iTunes, running as an administrator in an environment of clean boot, he goes through many steps.

  During installation, I can see it attack the AMDS, it copies the files and the green bar fills gradually until the end, he stops and poster "backward", the green bar go gradually back to nothing. It is then with all the other components and so-called ends successfully. But the amendments is still not there.

  The only place where I can find mention of AMDS is that if I look at services in the Task Manager windows - AMDS appears in the list even after all is uninstalled. Even if it is listed, it is not running as I put it to stop and it is disabled at startup.  None of the other components appear on my list of services when I uninstalled iTunes.

  I think that the amendments was not completely uninstalled, and there is somewhere that says that the iTunes install do not to install as a component somehing. AMDS always seems to be hiding somewhere, but I'm at a loss to know where or how to delete it.

  Any help would be welcome.

  You should ask in the forums of Apple. You can Google for the URL.