All equipment Linksys has stopped working! But having internet with NO LinkSYS equipment

Similar Questions

• Need help, get message display driver has stopped working, but has recovered

  Had no problems until recently, my freezer of mouse and screen, then get message display driver has stopped working, but recovered it gets really bad, please help

  Hello

  1. what operating system do you use?
  2. What is the brand and model of your system?
  3. Once you get this error message?
  4. you did it before the issue of any material changes or software?

  Try the steps outlined in the methods mentioned below and let us know if it helps.
  Note: The following Microsoft Articles are applicable for Windows 7 and Vista.

  Method 1: Boot your system in clean boot mode and temporarily disable your antivirus software. Check if get the same error message or not.

  Step 1: Try now to the KB article to perform the clean boot:
  How to troubleshoot a problem by performing a clean boot in Windows Vista and Windows 7:
  http://support.Microsoft.com/kb/929135
  Important: After you used the clean boot in order to solve your problem follow step 7 to reset the computer to start as usual.

  Clean boot in XP:

  Try now to the KB article to perform the clean boot:
  http://support.Microsoft.com/kb/310353
  Important: After you use the clean boot in order to solve your problem follow the steps in the "steps to configure Windows to use a Normal startup state" section to start your system in normal mode.

  Step 2: Turn off the antivirus software:
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
  Important: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks

  Method 3: update the driver for
  

  Updated a hardware driver that is not working properly:
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 4: Please visit the manufacturer's website and download the latest driver for your graphics card.

  Method 5: Windows 7 power save settings reduces the voltage to the video card too well when it is inactive for some video cards.

  To resolve this problem, disable the display (Plugged In) turn it off and turn off the display (on battery) power settings by using one of the following methods:

  Use the Group Policy settings:
  To resolve this issue by using Group Policy settings, follow these steps:

  (a) click Start, type gpedit.msc in the search box and press ENTER.

  (b) in the local Group Policy Editor, expand models of administration under Computer Configuration, expand System, expand power management, and then click display and video settings.

  (c) in the dialog box that opens, double click on turn off the display (Plugged In), click active, type 0 in the box to turn the display Off (seconds), and then click OK.

  (d) in the dialog box that opens, double click on turn off the display (on drums), click active, type 0 in the box to turn the display Off (seconds), and then click OK.

  Use the powercfg command:
  To resolve this issue by using the powercfg command, follow these steps:

  (a) click Start, type command prompt in the search box, and then click command prompt in the list of results.

  (b) at the command prompt, type the following commands:
  powercfg - X-monitor-timeout-ac 0
  powercfg - X-monitor-timeout-dc 0

  Get back to us if the problem persists.

• I use Windows XP, when I try to install 2 network connection on a PC, AAQMS has stopped working, but if I disable the secand connection quite well.

  original title: connection to a network PC 2

  I use Windows XP, when I try to install 2 network connection on a PC, AAQMS has stopped working, but if I disable the secand connection quite well.

  1 connected directly to the AAQMS system for the Air monitoring

  2. connect directly to the LAN of the company

  There is a solution that I can't connect two without any AAQMS system shutdown.

  Hello

  Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows XP Networking forum.

  http://social.technet.Microsoft.com/forums/en/category/windowsxpitpro

• HP Pavilion dv7-6c52ea all HP software has stopped working...

  Hi recentally purchased my DV7 (in the last two weeks), everything began to work very well and was incredibly fast. Then a week ago I noticed that he began to take a few minuets after loading office before it would work at normal speed. I have it linked to the HP connection manager, because it works run normally after the tab appears in the lower right.

  I decided to try and Manager of open connections, and all that happens is my processor jumps from 2% to ~ 15%, but no charge screen. Stays any computer in this state until I have completed the process in the Task Manager or you restart the computer. Since then, I realized this problem occurs with all HP (especially coolsence) software.

  Any ideas? I thought of all their software to uninstall and reinstall, but it could find on their website. Also, I tried already restotre system to the closest, which did nothing.

  Anyway, tahnks to help in advance,

  Niccy.d

  PS also do not know if this is related, but having a simular problem where the host appilication says catalyst control center has stopped working. Best solution I've found for that is just to remove the CCC, as it doesn't seem to be necessary. Thanks again

  OK, I gave up in the end and used the inbuild factory restore...

  everything seems to work fine now, just lost some of my files, but I can those back. First thing that I'll do this time, is to create a backup disk.

  Thanks for the suggestions, guess we may never know what was wrong

• All USB keyboard has stopped working

  Hello

  All USB keyboards have stopped working on my installation of windows 7. They work fine in the BIOS or on my Ubuntu installation. When I plug a keyboard, it still gives an error code 29 (drivers not found). I tried using two keyboards: a Logitech Gaming Keyboard G105 and a fairly generic wireless keyboard (a dongle to connect to the computer).

  I tried to uninstall it from the Device Manager and plug or restarted again, but the result is the same. Windows Update cannot find driver updates, and a system repair disc doesn't detect any problems. I temporarily created a fresh install of windows 7, which recognizes the keyboards very well. There is no driver available manufacturer (attempt to all keyboards are supposed to use the base drivers), and the keyboard Logitech gaming software does not see that it is there. 'Control Panel-> devices and printers' keyboards of lists of names, but the shows not even the stuff of work that is just under the Device Manager and the problem-solving the tent and is unable to find the drivers again. Try to select the driver HID keyboard in the Device Manager just in fact give the code 10 error (device does not start) instead.
  Nothing I've tried has gotten me anywhere. I would rather not re-install Windows 7, like all the time and effort to get my system how do I like it took me forever, but I can't see how I solve this problem. Any help would be appreciated.
  Thank you
  Zoden

  There is a good chance a "repair" install will fix the problem as a "repair" install should re-create any missing or corrupt driver installation file.

  I don't see anything definitive where observer records but can provide you with the following file, which can provide more specific information:

  C:\Windows\inf\setupapi.dev.log

• Qosmio X 70 - graphics driver has stopped working, but has recovered

  IM using a laptop Qosmio X 70 but when im using Photoshop to edit photos, I get a window telling me that the "graphics card stopped working but recovered", but the one to get Photoshop working again is closing in the Device Manager, then everything that I have worked on pop up is lost ,

  How can I fix it if it does not happen?

  What graphics card driver do you mean exactly?

  The fact is that Qosmio X 70 - a models were equipped with an external graphics (nVidia) and the Intel CPU provides additional internal Intel HD graphics (according to the CPU)

  Since the application Photoshop needs a lot of graphics performance (RAM), it would be desirable to use the NVidia GPU for execution using the Photoshop software.

  I recommend you to change the settings for nVidia and assign the photoshop to nVidia GPU.
  The setting can be changed in the nVidia control panel

  There, you must choose the "manage 3D settings" (can be found on the left in the nVidia control panel)
  Now in the main window, you will find two tabs "Global settings" and "program parameters".
  In the 'Program settings' tab select the application (Photoshop) that should use the nVIdia GPU

  If it is not listed, click the Add button
  Then choose the graphic processor preferred for this program (generally must be nVidia processor high performance)

  In "specific settings for this program", you can assign additional features to improve performance.

• HP Pavilion DV6: at startup BIOS showing CPU fan has stopped working, but I checked the fan is in good condition

  Hello

  I bought my HP Pavilion dv6 laptop 2011 as it starts a is overheating, freezing windows with noisy fan sound etc... but now, on information in BIOS boot indicating that the CPU fan has stopped working so immediately, I checked that I couldn't hear any noise from fan and no symptoms as fan works so I disassembled my laptop and removed CPU cooler fan only. Simply with the help of the battery, I checked the CPU fan it is running perfectly alone. but it does not work with the laptop.

  Please help me and guide what is the cause of this problem and how to solve this problem.

  Gassab

  HI @Kartic

  Welcome to the HP Forums!

  This is a fantastic place to find answers and suggestions!
  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums Learn how Post and more

  How can I find my model number or product number?

  I understand that since you had the laptop he had an overheating problem with a loud fan noise that causes freeze it.

  Recently, you have received the message that the CPU fan has stopped working and you couldn't hear the rotation of the fan to the top.

  You have removed the fan and checked, but the fan works.  It is possible that the connection was not safe in Notepad.

  Here is a link to an overheating and Auto Shutdown problem troubleshooting.

  Have you checked for an update of the bios of your laptop. You have provided the series of laptop you have, but not the exact model, so I'm not able to check it for you.

  You can run the Wizard to help HPin order to facilitate this process.

  Like a bios update has the potential to cause damage, you can contact HP technical support using this procedure.

  Please contact our technical support at 800-474-6836. If you do not live in the United States / Canada region, please click on the link below to get a number of assistance for your region.

  World wide phone holder

  Here is a link to the guide to maintenance and Service Guide HP Pavilion dv6000 Notebook PC for your laptop.

  You can replace the thermal paste on the processor. Here is a link to a YouTube video on this process.

  How to apply thermal paste

  Good luck!

• Ray material blue feature in sony all in one to stop working but dvd works

  My blueray stop working, but is still not dvd?

  Hello

  Looks like the drive has a hardware problem.

  Check with Sony support, their books online and ask in their forums about known issues.

  Sony - Contacts
  http://eSupport.Sony.com/us/Perl/contact-land.pl

  Sony - drivers
  http://eSupport.Sony.com/Perl/select-System.pl

  Sony - Support
  http://eSupport.Sony.com/

  Sony - Forum
  https://Forum.sel.Sony.com/?XID=M:Showcase:eSupport

  ==========

  Several good info here:
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• All files .exe has stopped working

  Whenever I try to open a program I get the * *.exe has stopped working. This is on firefox, windows media, nero, games player, etc.. The only way for me to open anything it must be run as an administrator will search for virus with spyware doctor™, malicious software with malwarebytes' Anti-malware and registry with Regcure errors. but nothing works any help.

  Here's what werFault.exe said on some programs.

  Signature of the problem:
  Problem event name: APPCRASH
  Application name: Hoyle Puzzle Games.exe
  Application version: 0.0.0.0
  Application timestamp: 562b029a
  Fault Module name: StackHash_6bc7
  Fault Module Version: 0.0.0.0
  Fault Module Timestamp: 00000000
  Exception code: c0000005
  Exception offset: 04554e40
  OS version: 6.0.6001.2.1.0.768.2
  Locale ID: 1033
  Additional information 1: 6bc7
  More information 2: f3f6a1403802118ada460cd45530935b
  Information additional 3:6477
  Additional information 4: d34edb9b57aa7d1aac3252e1a9591198

  Signature of the problem:
  Problem event name: BEX
  Application name: FreeCell.exe
  Application version: 6.0.6001.18000
  Application timestamp: 47919e59
  Fault Module name: StackHash_6bc7
  Fault Module Version: 0.0.0.0
  Fault Module Timestamp: 00000000
  Exception offset: 04554e40
  Exception code: c0000005
  Exception data: 00000008
  OS version: 6.0.6001.2.1.0.768.2
  Locale ID: 1033
  Additional information 1: 6bc7
  More information 2: f3f6a1403802118ada460cd45530935b
  Information additional 3:6477
  Additional information 4: d34edb9b57aa7d1aac3252e1a9591198Problem signature:

  Signature of the problem

  Problem event name: APPCRASH
  Application name: NeroExpress.exe
  Application version: 9.0.9.100
  Application timestamp: 48d36d6b
  Fault Module name: StackHash_6bc7
  Fault Module Version: 0.0.0.0
  Fault Module Timestamp: 00000000
  Exception code: c0000005
  Exception offset: 04554e40
  OS version: 6.0.6001.2.1.0.768.2
  Locale ID: 1033
  Additional information 1: 6bc7
  More information 2: f3f6a1403802118ada460cd45530935b
  Information additional 3:6477
  Additional information 4: d34edb9b57aa7d1aac3252e1a9591198

  Exception code: c0000005

  Check please the RAM to find errors. Please download memtest86 + [1] write a new bootable CD (use a CD - RW if possible) of ISO (download and use ImgBurn [2] for this), restart your PC and scan your RAM 4-5 h to find errors.

  André

  [1] http://www.memtest.org/download/4.10/memtest86+-4.10.iso.zip
  [2] http://www.imgburn.com/index.php?act=download
  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• PC-Doctor module has stopped working, but do not know if I have it on my computer...

  In the last 3-4 days I get a window intermitant arise seems them to be a "Microsoft Windows" its origin in the upper left corner of the window saying: "PC-DOCTOR MODULE has stopped working. A prolem caused the program to stop working correctly.  Windows will close the program and notify or if a solution is available. "Then a box of"close the program ".  I find 'FIND' to search for a program of the PC-DOCTOR MODULE and can not find one on my system. and "googled" it and came up with some info, but I'm not sure if it's a real source of assistance of a scam 'spyware '!   What I treat, something real, or something trying to eat me alive somehow?

  In the last 3-4 days I get a window intermitant arise seems them to be a "Microsoft Windows" its origin in the upper left corner of the window saying: "PC-DOCTOR MODULE has stopped working. A prolem caused the program to stop working correctly.  Windows will close the program and notify or if a solution is available. "Then a box of"close the program ".  I find 'FIND' to search for a program of the PC-DOCTOR MODULE and can not find one on my system. and "googled" it and came up with some info, but I'm not sure if it's a real source of assistance of a scam 'spyware '!   What I treat, something real, or something trying to eat me alive somehow?

  Hey Toccet

  to be on the good side for malware scan

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem if it is malware before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If this does not work in normal mode only the above work in SafeMode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Walter, the time zone traveller

• My C5280 All-in-one has stopped working, I get one! signal on the front panel, please help.

  My HP Photosmart C5280 All-in-One worked perfectly well and suddenly stopped working, started to blink and all I get is a! sign on the front panel, I use Windows 7 64-bit, please help!

  Hello waldonan,

  The first thing that we should try to do is a power reset on her pinter.

  Reset the printer

  Follow these steps to perform a reset of the product.

• Roxio Creator 2012 has stopped working and comes up with an error in the Visual C++ Runtime library.

  Original title: what is the number of the download version 03/03/2011 for Visual C++ 2010SP1 x 64 Redistributable?  It is newer than the 10.0.30319(x64)?

  Roxio Creator 2012 stopped running and comes up with an error in the Visual C++ Runtime library.

  Hello

  1. What is the exact full error message?

  2 is specific to the program the issue?

  3. you remember changes to the computer before the show?

   
  When was the update of Visual C++ 2010 installed and you can check the version in which it is most recent according to the installed update.
   
  Method 1:
  Install the latest version of Microsoft Visual C++ (x 64-bit) available at the following link.
  http://www.Microsoft.com/download/en/details.aspx?ID=14632
   
  Method 2:
  If the problem is specific to the program perform repair installation of Roxio for the following steps.
   
  (i) by clicking on the Start button, click Control Panel, clicking programs, and then clicking programs and features, open programs and features.
   
  (II) select the program Roxio and then to change or repair a program, click on change or repair.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
   
   
  In addition, if the problem persists after the question in the following link
  http://forums.support.Roxio.com/Forum/300-installationuninstallationupdate/

• 411 wants 110 all-in-in-one: Envy 110 411 a all-in-one has stopped working

  I want to 110 411 a all-in-one. I use the scan function - I don't use it to print or copy. I got it for a few years with no problems.

  Yesterday, when I went to scan a document as usual, he does not work and I had an error on a «transport jam» At the same time, the front where we load open paper sheets and the small arm (or what you call) that one up the paper also balanced out and remained outside. I don't know why that would happen, since I chose Scan and not print or copy them.

  I watched the online instructions and video for a carriage jam troubleshooting and followed the instructions, but transportation seems to be OK and there is no jam. No instructions troubleshooting that I saw mentioned the part about the lifting of the front and the arms of Briefcase to come. So, even if the error message says something about jam of transport, which doesn't seem to not be the problem.

  At this point, I followed the complete sequence of the steps in troubleshooting many times and they have not helped. In fact, I got a message saying that the device will be shut down to avoid damage. Help, please! I don't want to buy a new scanner right now!

  Dianne

  Hi @Dipena,

  Thank you for answering my questions!

  Please double check, that all steps have been taken in the following guides:

  1. Displays a Message ' Transport Jam '.
  2. A message "Paper jam".

  If the guides above are complete and has not solved your problem. Please contact HPtelephone support for further assistance. Repair printer / or replaced. (After you fill out the information, you will receive a phone number.) If you do not live in the United States / Canada region, please click the link below to get help from your region number. Language-country selector.

  Good luck!

  "Please click the Thumbs up icon below to thank me for having responded."

• Wireless printing has stopped working, but ONLY on my G72... not on other computers on my network mobile home.

  Hello... I have a laptop of HP G72 under windows7 64 bit and a deskjet4500 of HP printer all in one with a home network of the G of Belkin Wireless. Wireless printing works very well for months and it STILL works from another laptop. I am able to print from the G72 with a USB cord but when I try wireless I have a printer of saying not connected error message. I tried to walk through the troubleshooting tips, but nothing seems to work. Anyone can help? Thank you!

  OK, lets run this utility from the troubled PC: http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-926&h_lang=en&h_client=s-h-e17-1&h_keyword=dg-NDU&jumpid=ex_r4155/en/hho/ipg/forum/network_diag/

• Pavilion TouchSmart 23 all-in -: computer has stopped working!

  Good then yesterday I rebooted my computer and when it started to load the hp logo came and it's just... stayed there! I can't upload a picture at the moment, but it's just a black screen with a blue hp logo. Is something wrong with it?  Please help (the reason why I rebooted, it was also because I wasent download anything)

  Hello @Cilote12,

  I understand that your computer Windows 8 is freezing at the HP Logo during startup. I'm you provide a HP support document: computer does not (Windows 8), which has the necessary steps in order to solve this problem. I suggest review you the document and apply the measures contained in.

  I hope this helps. Thanks for posting on the HP Forums. Have a wonderful day!