All-in-one HP Deskjet 2541: whenever I have something to print there are spaces at the end of the paper.

So I had this problem since I bought the printer. Whenever I print photos or documents, anything, there always seems to be a white border at the each end of the paper in a horizontal position. a bit like the printer just abandoned at the end of printing. I tried to align the cartridges, but this does not seem to work and even tried to change the setting. The print alignment page prints nor for the right proportions. Sort can help guys?

Hello

The specific model does not support printing without margins (edge to edge), minimum margins are as follows:

As you can see, 1.45 cm from the button is not a printable area and it is an expected behavior for the printer.

You can find the specifications of paper below output:

http://support.HP.com/us-en/document/c03811750

Tags: HP Printers

Similar Questions

  • SER all-in-one HP Deskjet 3630: printers and drivers

    How to install the software of HP Deskjet 3630 series all-in-one software on a laptop Windows 8.1?

    Simple, you go to the HP web site...

    http://support.HP.com/us-en/drivers/selfservice/HP-DeskJet-3630-all-in-one-printer-series/7172306

    Download the drivers and full software and install them.   Download your user guide and read it.  There is also an update of the firmware...

  • All-in-one HP DeskJet 2130: all-in-one x 2 align

    I can't get an alignment page printed with my printer all-in-one HP DeskJet 2130 new (just out of the box).

    I have installed two ink cartridges, loaded paper and did not get an automatic alignment page print as the directions say I would. I put a piece a document on the glass of the scanner as shown and then press the START COPY BLACK button nothing works. The book comes out just of Virgin. I do the same thing with the button COPY COLOR START, get the same results.

    I turned the printer market twice, installed the printer software and tried again... still a blank alignment page.

    I used the new ink cartridges, not supplied with the printer... could they be defective? Any ideas? Thank you very much!

    (Wireless Internet connection, if it matters.)

    Hi @TillyBonsall,

    Welcome to the HP Forums!

    I read your post about how you get a page Virgin alignment with your printer HP Deskjet 2130. I'm happy to help with this alignment problem.

    What happens if you try to print a self-test page? Print a self-test Page.

    What operating system you use, Windows or Mac? What version? https://www.whatsmyos.com.

    In the meantime, please, try the procedure described in this guide, "Alignment failed" Error Messageand let me know what happens!

    If this, or one of the posts on this thread, helped you to solve the problem, please click on accept as Solution on the message. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

    I hope hear from you soon!

  • PRI all-in-one HP Deskjet 3520: Deskjet 3520 printer all-in-one copy, but will scan and print computer

    This printer has always worked well... used only occasionally. The cartridges are fine.  Everything prints out fine computer, it scans very well, but does not copy.  Looks like it's copy, but shot out a blank page.

    Welcome to the HP community @273frustrated,.

    I understand that your 3520 Deskjet is no copy making more correctly however, you can print and scan without a problem. I will do my best to help! I might be far away but I suspect that there could be a problem with the printhead and it printing black ink. I say this because when you print from your computer, normally the ink colors mix to create a composite black, and when you print copies, it's only the black ink cartridge that is used.

    I want you to try a power reset and make sure that the printer is plugged directly into the wall, avoiding bars power and surge protectors. This ensures that the printer is full on.

    Turn on the printer.
    With the printer, unplug the power cord at the back of the unit.
    Unplug the power cord from the wall outlet.
    Wait at least 15 seconds.
    Plug the power cord into the wall outlet.
    Reconnect the power cord to the back of the unit.
    If the printer does not by itself, press the Power button to turn it on.

    Please also try the procedure described in this guide and get back to me with the results when you're done and I hope that we can reach a resolution!

    Testify of my answer by hitting the thumbs up below and press the button "accept as Solution" if I have you helped a resolution!

    I hope this helps you!

  • The printer software e-all-in-one-HP Deskjet 3520 includes scan-to-searchable PDF function?

    The printer software e-all-in-one-HP Deskjet 3520 includes scan-to-searchable PDF function? I installed the full version of the software, and this isn't a scan option, only standard PDF. If it is not included with the not on this model is an alternative HP printer software that would work with this printer and if not, is there an all HP designed for home or small office printers still have this feature?

    Hello

    Please visit the following link:

    http://h30434.www3.HP.com/T5/scanning-faxing-and-copying/does-the-HP-OfficeJet-4620-e-all-in-one-printer-software/m-p/2821615

    Kind regards.

  • All-in-one HP Deskjet 2060 K110 series does not scan

    The power button of my K110 series all-in-one HP Deskjet 2060 is always enabled. Also, a doen't work scan. What should I do? Thank you!

    Hello

    You can try uninstaling your printer and then reinsert.

    Use this HP link > put in your operating system > follow through the following Web page > he'll be correct that information it tell you how to make and also how to get the right Drivers to install.

    http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=4157336&LC=en&cc=us&DLC=en&lang=en&cc=us

    If you can't fix it according to the information here, contact HP support.

    http://WWW8.HP.com/us/en/contact-HP/contact.html

    Or ask in the Forums of HP's Support.

    http://h30434.www3.HP.com/

    See you soon.

  • Cannot scan computer with J611 of all-in-one HP Deskjet 3050 a

    I use WIndows 7.

    I can scan from the all-in-one HP Deskjet 3050 a J611 assistance from the control panel.

    I was able to run a scan of the computer. But now when I select the icon on the desktop to my all-in-one HP Deskjet 3050 a J611, I see more scan options.

    Shane,

    I connected with a USB cable and everything works now. It is not convenient, but it's a solution. It's still a mystery as to why he's working for a few months and then suddenly stopped working.

    In any case, thanks for the follow up several times and find a work around.

    I'll provide Bravo and mark this thread as provided solution!

  • my HP Deskjet Ink Advantage 45: my compatible printer ink e-all-in-one-HP Deskjet Ink Advantage 4515

    We got my HP Deskjet Ink Advantage 4515 e-all-in-one printer from abroad and it is initially with ink jet 650 but when we checked, it is not available on our space, it is listed on the Web site that 678 as its compatible ink. It is safe to assume that 678 inkjet will work on our printer? Help, please.

    Hi @flyingknee,

    Welcome to the community of HP,

    I understand that you are looking for a compatible with your HP Deskjet Ink Advantage 4515 ink cartridge, and I'll be happy to help you.

    I found this picture on the HP site that shows the different cartridges compatible with the HP Deskjet Ink Advantage 4515 e-all-in-one printer for the different regions.

    Source

    Series printer e-all-in-one-HP Deskjet Ink Advantage 4510

    The following table shows the information of ink cartridge for HP Deskjet Ink Advantage e-all-in-one 4510 Printer series.
  • HP Deskjet 1510 all-in-One -: HP Deskjet 1510 all-in-One - scanner not recognized

    Establishing another laptop for my all-in-one HP Deskjet 1501. The printer works well, but I do not see the scanner information pop up. With my other laptop, he did. One reason why the scanner is not recognized? Thank you!

    Hello escada48,

    Please download and run the HP print and Scan Doctor www.hp.com/go/tools

    However, you can see the printer on the desktop icon you. Click it to open the Printer Wizard , and then click the Scan Picture ready.

  • All-in-one HP Deskjet 6310. Win 8 64-bit on ASUS Q200e.

    All-in-one HP Deskjet 6010 is loaded by Microsoft. If this isn't the case, HP driver on the HP site will include HP Solution Center similer to the driver for XP? And HP Photosmart first will be responsible as well?

    I'm afraid there is no way to get a CD with the drivers and software for Windows 8.  The only option is to download.  Normally the download will have the same software that the CD anyway, if you're not losing anything by installing the printer in this way.  I'm not sure that all software is delivered with the latest software, but it should be more, if not all of the software you got with previous versions.

    HP Photosmart and Officejet Full Feature software and drivers

  • I want to print black and white with empty color cartridge. My model is all-in-one HP Deskjet 4288.

    I want to print black and white with empty color cartridge. My model is all-in-one HP Deskjet 4288.

    The Deskjet F4288 joined the printheads on the ink supply.  These are replaced at each change of cartrdige so there is no concern about printing empty color or black cartridges.

    You should be able to print in ink entry mode "backup" by removing color (or black, but not both) cartridges.  There will probably be a warning message about ink backup mode but you should be able to print and the printer will work regardless of the cartridge is available.  In handwritten backup with the only color black cartrdige mode areas will print in shades of gray.  If print ink backup mode only the installed color cartridge then black will be printed by mixing colors.

    See page 75 of the manual here, that says:

    Use the entry ink-backup mode
    Use ink-backup mode to operate the HP all-in-one with only one cartridge. The
    ink-backup mode begins when an ink cartridge is removed from the print cartridge
    transport. During the ink-backup mode, the product can only printing from the computer.
    You cannot start a print job from the control (such as copying or scanning a Panel
    original).

    NOTE: When the HP all-in-one device works in ink-backup mode, a message is
    displayed on the screen. If the message appears and two print cartridges are installed
    in the product, check that the piece of tape plastic protection has been removed
    each print cartridge. When the plastic strip covering the contacts of the print cartridge, the product
    cannot detect the cartridge is installed.

  • Whenever I have turn off my pc and reboot later, the time and date go to 0.00

    Original title : improve system performance slow slow start

    Whenever I have turn off my pc and reboot later, the time and date go to 0.00

    Probably means the ROM BIOS chip gone bad and must be replaced. Its a small coin like chip located on your motherboard. You should be able to buy one on where one sells computers and electronic products.

    How to replace the BIOS chip on a motherboard . eHow.com

  • How to print on both sides of the paper with deskjet 9800

    Hello

    I'm trying to print on both sides of the paper.  I have a deskjet 9800.  I select two sided, but it will print one page after another.  Even pages are 'upside down '.

    Would appreciate help with this.

    Hello

    I think that it is an old printer and it MUST have a duplex unit to be able to print both side automatically if yu have to print manually (turn inside papers yourself):

    http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/KB/docDisplay?docid=c00283626&AC.admitted=1414613820848.876444892.492883150

    Kind regards.

  • Whenever I have cut an audio clip in my sequence, the source monitor freezes creating two of the same framework.

    Whenever I have cut an audio clip in my sequence, the source monitor freezes creating two of the same framework.  I then have to wait anywhere from five to ten minutes only for Panel source monitor back to normal to continue editing, with playback.  Itself doesn't freeze, I am able to go into my settings and change again within the sequence.  It's only the source monitor.  Anyone know this problem and is there a solution?  Thank you!  My apologies if this has already been discussed in another post.

    I am running on a processor intel i5 processor 4690 k, 16 GB of ram, all-new msi motherboard and 980 gtx graphics card nine.

    Under the key sequence, uncheck preview Composite during Trim.

  • HP Deskjet 1000 J110 series how to print on both sides of the paper and staple Yes to change?

    HP Deskjet 1000 J110 series how to print on both sides of the paper and staple Yes to change?  I looked everywhere I can think of. You are my last resort.

    Windows 7 ~ 64-bit

    Hello

    Unfortunately, this printer does NOT support duplexing (printing on both sides):

    http://support.HP.com/us-en/document/c02231304

    Kind regards.

Maybe you are looking for