All-in-one Officejet Pro 6830: INSTALLATION of the OFFICEJET PRINTER

I had already set up my printer when I had last year. A few weeks ago, my printer was unplugged, when I connected again, wanting to be set up again. He won't go beyond the screen 'Configuration of the cartridges' because he wants than that it came with that I don't have. Why is there need to put in place again and what can I do about it?

Hey @britb,

Welcome to the Forums of HP Support!

I understand that printer e-all-in-one Officejet 6830 asking cartridges SETUP. For this problem, contact HP support. You can do this by clicking on this link and fill in the form below.

Please let me know if you are able to resolve your problem after contacting HP Support. If you are, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

Tags: HP Printers

Similar Questions

  • Can't find model number, installation instructions for the unit duplex for printer all-in-one Officejet 6110

    MY friend gave me a duplex unit to another printer 6100 series he had. We thought that it would be compatible. The HP site says that my all-in-one OfficeJet 6110 can use a duplexer, but that's all he says: no model number and no installation instruction.  Does anyone have any info or suggestions? I can't know just by looking at my printer.  (The duplexer No. FPU is C9101A).

    Thank you!

    To install the duplexer, you must remove the rear blankpanel of your OJ 6110.  The rear panel will be approximately 9 "wide and 4" high with two s tab that can be moved together in the output panel.  Snap the duplexer in place once it is removed.  Make sure that it is oriented correctly, the label must be on the bottom.  Use large buttons on the ends of the duplex unit to release the duplexer if it is to be removed or moved.

    With the duplex unit installed, you will need to configure it so that it is recognized by the driver.  See the post here for more information on activation of the duplexer.

  • How to set the time and date on printer n911a e-all-in-one officejet pro 8600.

    How do you set the time and date on printer n911a e-all-in-one officejet pro 8600. This info is not in the user's guide or the getting started guide.    Thanks in advance. Jim

    Jim go to settings on the 8600, click Preferences.

    There is an option DATE and HOUR.

  • Cannot sweep the all-in-one Officejet 4630

    Hi all - help needed please.

    Recently bought a printer all-in-one Officejet 4630 and had nothing but trouble, set-up and use it. After several attempts to put in place, everything is roughly in order, though I can't yet scan of the control on the machine Panel (I can scan only through "system preferences" under the apple icon).  Whenever I try to scan the engine control panel (and not through system preferences), using either the wireless network (Airscan or whatever it's called) or the USB cable, I have the following message on my laptop screen:

    Task is not available

    The task of "Photo (JPEG)" found on your device is not available on your system. Please select another task.

    The same thing happens if I try to scan to PDF. I use an old (c.2007 MacBook Pro) that runs the OSX10.9.5 Mavericks. Internet connectivity is not a problem because we have the right cable broadband. All I want to do is scan directly from the printer to my computer, preferably using a wireless connection. Help, please.

    Thank you

    Hi @nckbtlr and Happy Halloween!

    I'm sorry to hear about the problems you are having with your Officejet 4630. I understand that you are unable to scan from the front of the printer. I'd be happy to help you with this.

    In the spirit of Halloween, first I have to ask: what did the Mummy to tell the Agent from HP Support?    Let's wrap this case up!

    I suggest to uninstall and reinstall the software. Please follow the instructions below to complete a more comprehensive uninstall than basic uninstall. I know that these steps look long and convoluted, but I made it easy to follow and have confidence that these steps will solve the problem.

    Scrub / uninstall

    • Open the Applications folder > HP or Hewlett-Packard folder > Uninstall HP
    • Click continue, click on one of the printers in the list.
    • * Only perform this step if you have not all other HP printers.  Press and hold the Option, control and command, while now the three buttons.
    • Click Uninstall.

    Reset the printing system

    1. Click on the Apple icon ( ), then click on System Preferences.

  • All-in-one Officejet 5610: lost all ability to scan after operating system upgrade

    Hello

    First post.

    Tried to implement everything. Need for new perspective or someone just told me that the printer/scanner is not taken in charge any longer.

    Recently updated to OS 10.8.5 as well as extra memory.

    Have scanner only for the work of the company.

    The scanner just stopped working after update of HP software. I don't remember version. Nevertheless, today I removed all HD and started around, but nothing works.

    Start over means, I downloaded a new driver and the patch.

    Using a HP scanning Application. Now that the application does not appear even on the computer.

    Let's start with some basic questions and then go from there:

    Neither HP or HP scanning Application utility are now on the hard disk after you follow the instructions from HP to delete.

    What I need the original disks and to reinstall the software from it or can those be online?

    Thank you.

    Mike

    Follow-up.

    Tried this approach (see link), but the all-in-one Officejet 5610 is not listed. I suspect the printer/scanner in is no longer supported?

    THX!

    http://www.MethodShop.com/2013/12/HP-utility-install.shtml

    Second follow-up:

    I understand how to use of Apple's Image Capture application as a workaround. Not as friendly as HP Scan.

    Unless someone can tell me the HP and HP Scan utility always work in OS 10.8.5 for the 5100, I guess that will be sufficient.

    Thank you.

    Hello

    For Mountain Lion, your printer software is provided via Apple Software Update.

    Follow the steps below under "Use Apple Image Capture" to scan with the Officejet 5610 on your operating system:

    http://support.HP.com/us-en/product/HP-OfficeJet-5600-all-in-one-printer-series/441142/model/441144/document/c04788799/

    If you are having problems scanning, be sure to follow these documents to install the latest drivers from Apple Software Update:

    http://support.HP.com/us-en/product/HP-OfficeJet-5600-all-in-one-printer-series/441142/model/441144/document/c04510394/

  • HP Officejet 8500 a e-all-in-one: Officejet 8500 A progressively less black ink prints

    Greetings,

    I have an Officejet 8500 a e-all-in-one, which was a little finiky when it print black ink. It prints well in the morning and for most of the day, but sometimes late in the afternoon, it will print progressively less black ink until it stops completely. When he is left alone during the night, it will start printing without any problems again in the morning. The amount that we will print does not seem to have an effect. It will do the days where we printed almost anything just as often we are printing constantly throughout the day.

    There is a laptop connected via the USB port and two other people who connect via radio. A computer has 10 64 - bit Windows, Windows 64 - bit to 8.1, the last is a macbook. Printing problems are are produced through two connections.

    There is no problems with the ink cartridges, they are brand new and in Full ink levels report.

    The printer has aligned the printheads several times with success.

    I ran to the printhead cleaning several times and it had no effect.

    I took the print heads and cleaned the contacts on the back and in the machine.

    There has been no error on machines or computers.

    At this point I'm not sure if it's a matter of ink clogged or if it is somehow overheating.

    Hi pyrakitt,

    If the steps described in the guide I provided did not resolve your problem, I would certainly consider replace the printhead (s), or the upgrade of the printer. Please Contact HP phone support for assistance. (After you fill out the information, you will receive a phone number.) If you do not live in the United States / Canada region, please click the link below to get help from your region number. Language-country selector.

    If this, or one of the posts on this thread, helped you to solve the problem, please click 'Accept as Solution' said post. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

    Hope that answers your question and have a nice day!

  • all-in-one Officejet 6310: officejet 610 all-in-one in offline and don't watch does not reinstall in windows 8

    I have a Wondows 8.1 and a printer portable all-in-one officejet 6310.  I have my printer installed and works fine on my laptop, but out of the blue one day that the printer will be offline and restarting the computer and printer does not correct.  I've uninstalled and reinstalled the computer many times - this helps for about a week before it disconnects again.

    Now when I uninstall my laptop says there is no printer in range and lists no printer for me to install.  When I tried to manually in my printer - doesn't say that there is no such printer available.  Any suggestions?  Apparently this ONLY happens to me on my computer and not someone else in the home on their laptops - we have a total of 4 laptops in the House all on the same router and using the same printer.  Oh how I feel like a fool with windows 8.  Someone at - it helps or good suggestions for me? PLEASE? !!

    Don't worry, it happens to the best of us. I recently became very angry because my iPad was not charging, the end came unplugged from the wall charger! Laughing out loud

    This problem can be caused by outdated closed ware, contradictory I.P within the router, etc. I have worked on a Thread revolving around Windows 8.1 for awhile, check it out for some possible future troubleshooting operations.

    There are steps to add the printer a way, assign a static IP, check that some updates are installed by Microsoft, etc.

    Missing/partial prints & printer offline on Windows 8/8.1<>

  • new computer with windows 8. scanner of HP all-in-one officejet 5610 worked but is now in offline mode.

    I have a new Dell with windows 8.  hp officejet 5610 all-in-one seemed fine, and I could scan and print.  Now, I can scan is no longer.  charms - settings - change the settings of Pc - peripheral watch HP Office Jet 5600 offline!

    He could have an update query of some software that I have authorized.  Maybe that's my problem?  How can I fix it?

    Thank you

    Hello

    Please download the drivers and Softeware full functionality from the following link and install it on your Dell:

    http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4132&LC=en&cc=au&DLC=en&sw_lang=&product=441125#n195

    Kind regards.

  • All-in-one Officejet J6480: printer Officejet J6480 on Windows 10

    I've owned a printer all-in-one Officejet J6480 for a few years.  I bought a new Lenovo computer several months that came with a free to Windows Update when 10 is which would be published.  I managed to load the J6480 software and everything worked very well, including the scanner.  When Windows 10 came out I upgraded to it and rebooted the printer software and everything worked fine.

    Then about two weeks ago, all the J6480 would do is printed.  When I tried to open the HP Solution Center to scan a document all I had was a 'ping' and the Center does not open.   So I tried to remove all the HP software and re - load.  It would be the load but not completely.  I kept getting the message that "the application you are trying to use has been blocked to open because it could damage your PC or the loss of data. This is because some applications that worked with a previous version of Windows may not work the same way with Windows 10 ".  I do not understand why it worked fine for a few months with 10 windows and now it's incompatible, unless there was an automatic upgrade (Windows 10 or HP) that is now causing the conflict.

    I've uninstalled and reinstalled the software several times but to no avail.  Can anyone suggest a solution?

    Hello

    Please check your history of updates of Windows 10 and remove/uninstall kb3132372

    Note: Microsoft is working with Adobe now:

    https://support.Microsoft.com/en-us/KB/3132372
        
    To uninstall this update, click Control Panel, click System and security, click on view installed updates in Windows Update, then select in the list of updates.

    Kind regards.

  • The upgrade of all-in-one Officejet 6210

    I have a 6210 that I love, but it is not compatible with Windows 8 (for example when I want to scan doesn't give me the option to save as a jpg file.

    I like the printer and want to know what model number would be the direct upgrade of the 6210?

    Sorry, you are right. This printer is not compatible with Windows 8. A great upgrade to the next type of printer which will be compatible would be an all-in-one Officejet 6600 or 6700 Officejet printer.

  • print allignment page all-in-one HP PSC 2400 turns off the printer features

    After changing the ink, trys to printer to run printerr allignment.  It feeds the paper to halfway through, then hangs up with all the flashing lights.  I can use the printer on the computer, but the lights blinking and I can not copy or scan using the controls on the printer, my son found a solution a bit backward, but we didn't copy it down. Any help is appreciated.

    After changing the ink, trys to printer to run printerr allignment.  It feeds the paper to halfway through, then hangs up with all the flashing lights.  I can use the printer on the computer, but the lights blinking and I can not copy or scan using the controls on the printer, my son found a solution a bit backward, but we didn't copy it down. Any help is appreciated.

    Hello

    You can get a faster solution on the Support Forums of HP printer.

    Here is a link for your convenience.

    Printers and all-in-one - HP Support Forum's:
    http://h30434.www3.HP.com/T5/printers-and-all-in-ones/CT-p/inkjet

    Select the appropriate forum for your device.

    Concerning

  • SMART PHOTO ALL-IN-ONE C-4385: can not find the download of the printer software.

    I need to uninstall and reinstall the complete software for a Photo Smart C-4385 all-in-One. I searched everywhere on the HP site and Googled it and still can not find it. Can someone help me with this? My OS is Windows Vista Home Premium 32-bit. Thank you.

    Hello

    Here's a direct link for the full software features for your printer:

    http://ftp.HP.com/pub/softlib/software10/COL20274/MP-53147-4/100_228_PS_AIO_02_Full_USW_enu_NB.exe

    Kind regards

    Shlomi

  • j ' have an asus x93s it does not read my dell AIO 926 photo printer all-in-one. I HAVE BEAUTIFUL DOWNLOAD THE DRIVER.CA DOES NOT WORK!

    j ' have an asus x93s it does not read my dell AIO 926 photo printer all-in-one. I HAVE BEAUTIFUL DOWNLOAD THE DRIVER.CA DOES NOT WORK!

    Microsoft answers site provides support in English. The following Uniform Resource Locator (URL) will be low - you receive information appropriate for your set up support. Open the link and get your region from the drop-down list, and then click the arrow to continue.

    http://answers.Microsoft.com/fr-FR

  • Windows cannot print due to a problem with the installation of the current printer.

    Thread title: Epson TX235W will not print

    When I click on 'print', I get the print control. the box that tells the printer how many copies, etc.  When I toast 'print' it get a little box that says Windows cannot print due to a problem with the installation of the current printer.  Try one of the following:

    Check the printer by printing a Windows test page

    Ensure that the printer is online and on

    Reinstall the printer driver

    I did everything above and I get the same result.

    Help!

    Hello

    Did you of recent changes made to your computer that caused the problem?

    This problem is limited to a particular application?

    How is the printer connected?

    Method 1) restart the print spooler service and delete the print queue

    Start the print spooler service in the Services console

    1. Click Start and run, type services.msc, and then click OK.
    2. Right click on the print spooler service, and then click on stop.
    3. Right click on the print spooler service and then click Start.

    Start the spooler service for printing at the command prompt

    1. Click Start, run, type cmd, and then click OK.
    2. Type the following commands at the command prompt:

      net stop spooler
      net start spooler
      Output

    Note: Press ENTER after each command line.

    Cancel printing

    http://Windows.Microsoft.com/en-us/Windows-Vista/cancel-printing

    Method 2) remove and add the printer and then check.

    Add or remove a printer (Applicable for Windows 7)

    http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

    It will be useful.

  • Windows 7 cannot print - "Windows cannot print due to a problem with the installation of the current printer"

    Window 7, Lexmark 1300 series. Cannot print. When you try to print from Notepad, the error message is "the system cannot find the file specified." What impression of the word is "Windows cannot print due to a problem with the installation of the current printer" have uninstalled and reinstalled all printers in many times. Removed the Lexmark 1300 in the registry and reinstalled. No change. Ran sfc/scannnow several times. Microsoft Fixit print detected no problems. Help, please.

    Hi Baccy138,

    See the methods mentioned below and check:
    Diagnose and automatically fix the Windows USB problems
     
    Try to download and update the drivers manually from this site:
    1. click on the above link and click the menu drop down and select Windows.
    2. Select the version of operating system like Windows 7 and check the bit as a result.
    3. Download complete drivers and install it.
     
    Hope this information helps.

Maybe you are looking for

  • Satellite A500 - 1C0 - game Second Life while my knees restarts

    Hello While I'm playing Second Life, my knees will restart all of a sudden. What can I do? Just 3 weeks ago, I bought my knees. Please help me. Here are the system requirements for Second Life:http://SecondLife.com/support/system-requirements/ And he

  • 18/09/2012 is no sign yet of ics bug fix, I wonder

    Well, we are in the middle of September, and still no bug don't fix for ics I wonder if the bike is jump a quite bug fix for jelly bean guess is it possible other thoughts on this

  • is it new como

    pls send me text on canon 5 d Mark iV pls can I know you... He will come canon 5 D mark IV soon... I want to shoot video Canon EOS... I saw on canon 5 d Mark IV in the website... What are the topic of your choice

  • Is the "Consulted" file property information available?

    I have an Acer laptop under XP SP3. I noticed that all the folders and files to the root of my C: drive have a time to "Consulted" from 12:00 as indicated by Windows Explorer in the "Détails" view I looked through many other folders and files on the

  • Computer does not restart after the update

    Description of the problem: I am unable to restart my laptop after receiving the update of microsoft onSaturday.  I have a gateway MT6707. I got the following error. "Unable to start Windows.  A recent hardware or software change might be the cause.