All-in-one Officejet Pro 8620: hesitation in printing final page

Similar Questions

• All-in-one Officejet Pro 8620: officejet pro 8620 all-in-One scan negative

  How to scan negatives and 35mm on a HP Officejet Pro 8620?  I recently read it is possible on older versions, but can not find all the information about the printer I have.  Please answer quickly because it's something I have to do for my business.

  Hello

  Negative scanning requires a special film holder (as in This example), indeed such was offered by older models and not in the past years.

  The 8620 do not offer this kind of functionality, as well as any current inkjet all-in-one device and you can't scan negatives with your printer.

  Only proffesional scanners offer a these these days, not all in one of the devices.

  Here's the only model I have managed to find to your purchase today, there could be some more and it's worth trying a such google searh:

  Digital flat HP Scanjet 5590

• All-in-one Officejet pro 8600: HP 8600 prints red as a sort of brown color

  I think it is the magenta channel that causes the problem.  I seems that if I try to print anything with red in it, then the Red areas come out as Brown.

  Yellow, green and blue seem to be OK.

  As it is now, the printer is useless for anything other than black monotone.

  Unfortunately, the machine is just out of warranty, so then I am completely sabotaged!

  All other test prints go perfectly, it is only fair that the Red comes out: brown!

  All received greatefully.

  Note, I tried editing a new set of cartridges HP and the problem persists.  Also cleaned, clean the heads several times including third level.

  I just tried a full-partial reset without change in condition of impression - always Brown instead of red.

  Martin

  Hello

  I guess that his problem with printhead which can be bought out side HP.

  More if your printer's warranty, you may have an option to trade in the printer.

  If you are in the United States, call the HP Technical Support @ 1800-474-6836

• How to set the time and date on printer n911a e-all-in-one officejet pro 8600.

  How do you set the time and date on printer n911a e-all-in-one officejet pro 8600. This info is not in the user's guide or the getting started guide.    Thanks in advance. Jim

  Jim go to settings on the 8600, click Preferences.

  There is an option DATE and HOUR.

• HP all in one OfficeJet Pro 8500 - A909g

  Upgrade to Windows 8.1.  When you print documents of several pages, the printer stops just randomly after several pages of the document.  And a pop-up error message appears.  Simply said "could not print... document name.  I have to re - that the print job (specific page #, usually 2 at a time).

  A ran Print & Scan Doctor several times (it found & fixed some problems with the queue status & Print), but problem persists.  Now it prints more than only 2 pages.  But it keeps randomly quit smoking.  Very frustrating because I work with large documents.

  Any other suggestions?

  Thanks for any help out there.

  Patti

  Hello Patti, there.

  Only, I stumbled upon your post on your Officejet Pro 8500 not to print all pages in a document for you. I noticed that you ran printing and scanning Dr. temporarily fix the problem.

  I suggest completely uninstall the printer software using a level 3 to uninstall and reinstall the printer on your system.

  Side note: complete a level 4 is only available if you don't have a computer HP or other HP device installed on your computer. A level 4 will remove completely all files in HP. If you don't have a computer HP or other HP device, level 4 is OK to run.

  Here are the steps and the tools I recommend:

  1. uninstall - HP Officejet software and driver removal utility

  (Run, extracted, and then select uninstall_L3)

  2. restart your computer manually if the uninstaller does not restart it.

  3. Replace with one of the following methods:

  Driver and complete software of HP Officejet Pro features

  HP printer install wizard for Windows

  Best wishes

• All-in-one Officejet Pro 6830: INSTALLATION of the OFFICEJET PRINTER

  I had already set up my printer when I had last year. A few weeks ago, my printer was unplugged, when I connected again, wanting to be set up again. He won't go beyond the screen 'Configuration of the cartridges' because he wants than that it came with that I don't have. Why is there need to put in place again and what can I do about it?

  Hey @britb,

  Welcome to the Forums of HP Support!

  I understand that printer e-all-in-one Officejet 6830 asking cartridges SETUP. For this problem, contact HP support. You can do this by clicking on this link and fill in the form below.

  Please let me know if you are able to resolve your problem after contacting HP Support. If you are, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• New OfficeJet Pro 8620 does not print PDF files

  I have a brand new 8620 and I use Windows 7. My printer prints a few PDFs but not most other PDF documents. I am using Acrobat Reader XI. The printer will print from MS Office.

  HELP, please!

  Hello! Welcome to the @lmel forums

  I have a few ideas that come to mind, I read the issue you're having with printing of PDF files. They are here!

  1. try to resave the PDF files that do not print and then try printing again.

  2. update of Adobe:

  Select help - search for updates. If a new update is available, it installs automatically.
  Once installed, you can restart a computer.
  Then try to print the PDF file.
  
  http://helpx.Adobe.com/Acrobat/KB/troubleshoot-PDF-printing-Acrobat-Reader.html

  3. run the print and scan the doctor. This diagnostic tool will check for all conflicts that may be causing the problem. The tool will show you a report at the end. If there is a problem that the tool could not fix, you will notice it in the results.

  4. uninstalling the printer software

  Restart the PC

  Reinstall the printer: HP Officejet Pro 8620 e-all-in-One Printer series full feature software and drivers

  That should do the trick! Keep me abreast of the results!

  Have a great Wednesday

• HP Officejet Pro 8620: Selection easy printing on tray 1 or 2

  We have an Officejet Pro 8620 with extra paper tray. Tray 1 for Virgin paper, tray 2 for the paper with the logo of the company.

  Now, when we want to print to tray 2, we reject Tray 1, whereas, after a few attempts the software switches to tray 2 and printing begins.

  It is possible, before printing, to change the setting in the software, select printing for tray 2. But it's pretty heavy.

  We want an easy way to select printing for Tray 1 or the tiroir2. For example, as seen in other environments, so that we can choose to print on:

  -HP Officejet Pro 8620 (Tray 1) or

  -HP Officejet Pro 8620 (tray 2)

  This could be seen as a separate printers. How can we achieve this?

  Change the setting every time, is not a good option. In addition, we have other software that we want to configure so that they automatically print to the correct bin.

  Thank you!

  Hello @Sing020,

  Welcome to the Forums of HP Support!
  
  I would like to help you today with the addition of two copies of your HP Officejet Pro 8620 e-all-in-one printer to your Windows 7 computer to make impression on tray 1 and 2 of the State Bar an easier process for you. Can I please you follow the steps below.

  1. click on the Start menu

  2. Select devices and printers

  3. in the devices folder and printers, you should see your printer HP Officejet 8620 installation

  • Before you continue, we must determine how your printer is connected. If you have a printer Wireless HP Officejet 8620, on the front panel of your printer, tap the Setup button.  Select Network Configuration. Select the wireless settings. Touch Wireless details. Make a note of the IP address.
  • If you have the cable plugged USB printer please right click on the HP Officejet 8620 under the printers and devices folder and click on printer properties. Click the Ports Look under the list of Ports for the port selected for your printer. There should be a check mark next to one of the USB ports. If you move your mouse over the Port is expected to show you the full name (USB 0001, 0002 USB, USB 0003, etc.). Note the number of USB Port.

  4. then right click on the HP Officejet 8620 which shows currently installed on your computer. Left click on Printing Preferences.

  5. on the paper/quality tab, select the paper sizeand tray (Tray 1) .

  6. click on apply and OK

  7. right click on the HP Officejet 8620 last once and click on Printing Preferences. On the general tab, you should be able to add (Tray 1) at the end of the name of your printer.

  8. click apply and then OK to save the changes.

  9. now, must be added in the second copy of your printer. Please close devices and printers for a moment.

  10. click on the Start menu

  11. in "search programs and files" box located just above start type % temp % and press enter on your keyboard

  12. when the Temp folder opens, select Ctrl + A at the same time on your keyboard. Everything in this folder will highlight now.

  13. Select the "delete" button on your keyboard. The Temp folder contains the temporary internet files. None of the actual files or folders on your computer will be affected by deleting Temp files. A Temp file should you will automatically get the pop up to 'jump' this point.

  14. close the Temp folder when it is empty

  15. right-click the recycling bin on your desktop and select empty recycling bin

  16. click here to download the driver Officejet 8620

  17. when the download is complete extraction will occur and may open an install window. If an installation window opens, Please close it.

  18. click on the Start menu

  19. in the box "search programs and files" type folder and press enter

  20. when the Temp folder opens, find the file 7z. Click once 7z folder to open it , it

  21. at the top of the page, you will see the path to the file. It should show something like: Local C - users - AppData - Local - Temp-7z drive... Left click on the right side of this bar of the file path. All that will now highlight in the path of the file. Right-click on the path of the file to highlight then copy it.

  22. close the Temp folder

  23. click on the Start menu

  24 click on devices and printers

  25 click on Add a printer in the top

  26. click Add a local printer and click Next

  27. click on use an existing Port. Click the menu drop down and choose the exact same port that your HP's Officejet 8620 at current address is installed on. Press Next.

  28. If you are brought to a list of manufacturers and Printers, click disk , at the bottom right. Right click on the bar of path of file in the window "install from disk" and "Paste" in the path of the file we copied previously

  29 press on Next to complete the process of adding

  30. Once you are taken back to the devices window and normal printers, you should see two copies of your installed HP Officejet. If you see only a single copy, your computer can be grouped under the same icon. Make a right click on the HP Officejet see you and now need arrows next to the options (options print, the print properties, etc.). If you click on the arrows, you will see two copies of your printer.

  

  31. right click on the HP Officejet 8620 we set up for tray 2

  32. left click on Printing Preferences

  33. click the paper/quality tab

  34 select the paper in tray 2 trayand set the paper size

  35. click on apply and OK

  36. you can right click on your HP Officejet one more time and select printer properties.

  37. rename this copy to HP Officejet 8620 (tray 2)

  38. click on apply and OK

  Now when you try to print, when you select the file and print , you'll see a Tray 1 and a copy of your HP Officejet tray 2 . Simply choose the copy that corresponds to the status bar you want to print from.

  Please let me know if the steps I have provided to resolve your problem. It may seem like there are a lot of steps, but it's really an easy process. I wanted to give you as much detail as possible for scenarios that may occur. Good luck!

• OfficeJet Pro 8620:2 - back printing on HP 8620

  I use HP Officejet Pro on Mac OS X Yosemite 10.10.5 8620. It seems that 2 sides print has stopped working for some applications. It was working fine before. I tried to print from a Web site and selected 'double-sided' but impressions are released in the form of separate pages. I tried for a PDF with the same thing happens. I printed from InDesign (CS5) and it worked fine 2 faces. What happened and how can I run constantly? Thank you

  Hey @StudioJ,

  Welcome to the Forums of HP Support!

  I understand that you have some problems with the printing of your Mac OS x 10.10 machine to your Officejet Pro 8620 e-all-in-one printer. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done:

  1. If your printer is connected to your Mac via a USB cable, remove it.
  2. Click on your Apple icon, system preferences and printers and Scanners.
  3. Hold down the CTRL key and click the icon of your printer on the left.
  4. Click on reset printing system.
  5. Open Applications, utility and disk utility.
  6. Click "Macintosh HD" on the left.
  7. Click on verify disk permissions. This should take about 10 minutes.
  8. Click on repair disk permissions. This should take about 10 minutes.
  9. Restart your Mac.

  Now, if you removed the USB cable, plug it. Otherwise:

  1. Click on your Apple icon, system preferences and printers and Scanners.
  2. Click on the button "+" at the bottom left.
  3. Select your printer from the list.
  4. Click the check box next to and select your printer from the list.
  5. Click on Add.

  Please let me know if the results after following the above. If you are able to print double-sided, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• OfficeJt Pro 8620: OfficeJet pro 8620 does not print

  My new 8620 habit simply printed.

  Scan and these images successfully appears on the laptop.  Wireless connection is strong and recognized.  can print from 2 different iPhones, but nothing of the laptop.

  Print Manager and HP Web site so tell me the printer is online and ready, and is the default printer recognized and there is no problem with the printer.

  Same printing page Web HP EWS but nothing else of the laptop may print

  Running HP Print & Scan Dr. (about 4 times) and the test page does not print, but I can print the internal test page.  Then say it is a software problem and uninstall.

  Have uninstalled and reinstalled twice, completely deleted printer off, unplugged, ALL but nothing doesn't make this stupid boring piece of manure impression

  Not sure whether I'm under Windows 10 32 or 64 bits.  Remember exactly where to find this info.

  Urgent need help I have work to do.

  Thank you

  Hello

  Thank you for using the HP forum.

  Have you tried to install the HP printer software?

  You can download and install the software FULL of HP printing features to win 10 (32/64-bit):

  http://support.HP.com/us-en/drivers/selfservice/HP-OfficeJet-Pro-8620-e-all-in-one-printer-series/5367611/model/5367613#Z7_3054ICK0K8UDA0AQC11TA930C7

  Once you have downloaded and installed the software, FULL of features, you will be able to print and scan.

  Let us know if it works and what are the errors that you see.

  We recommend that you uninstall before reinstalling the previous software.

  Hope that helps.

• HP Officejet Pro 8620 - repeated failure printer

  An employee has a problem with a printer.  Repeating me "printer failure" Please restart it... over and over.   Then he said: contact HP if continues to display the message to the top.  Laughing out loud!!   This is not very helpful at all.  After an hour of trying to "contact HP", I resorted to this forum for help.  Can someone help me?  This printer is not available for chat and phone support tells me online.   Round robins are supposed to be non-existent, except for support at HP

  Thank you

  HI @EB-ADMIN,.

  Thank you for joining the Forums of HP Support!

  I understand that there is an error message which reads "Printer failure" on the HP Officejet Pro 8620 e-all-in-one printer. I also see that you would like as the contact information for the HP Technical Support. I want to help you.

  Here is a document that I recommend that you try, HP - "Problem with print head", "Printer failure" printers 'Ink system failure' or a '0 x' r's 'C2 '.... "Displays Message error.

  HP Officejet Pro 8600, 8610, 8620, 8630, 8640 and 8660 e - all-in - One Printer Series - one "ink system failure" Error Message on the printer "

  This document is for HP Officejet Pro 8600, 8610, 8615, 8620, 8625, 8630 and 8660 printer e-all-in-one.

• HP Officejet Pro 8620 does not print, but the document is sent to the printer without error

  I bought a HP Officejet Pro 8620 and connect 2 computers via a wireless connection with the latest driver.
  In the first computer (windows 7) I can print without any problem
  On the second one (windows 8), when I try to print, I can see in the windows printer spooler file that I'm going to print. The file is sent to the printer, without error, BUT nothing happens.
  I already tried reinstalling the drivers, restart the computer, the printer. I tried to connect to a wired network. It still does not. It's very weird but I got no error, just does not print. I thought that the printer does not work, but on the second computer I can print.
  Thank you for your advice

  Hello

  Please download and run the HP print and Scan Doctor www.hp.com/go/tools

• OfficeJet Pro 6978 all-in-one: OfficeJet Pro 6978 / will not download drivers

  I just bought this printer Office Jet Pro 6978, All In One Printer.  It won't let me download the driver listed in the steps to implement, it fails every time.  I tried to use the CD that came with it, it gave me a message "this computer's operating system is not supported."   So this printer will not work on my 64-bit?  Or elsewhere?  My computer is a HP.  Where can I find a download driver for this printer for my operating system?  When it prints, it prints a nonsense.  % beginprolog % beginresource: file and so on with such things.  I am at a loss... Any help would be great.

  Hello

  Sorry, but the printer is not supported on Windows Vista 64-bit.

  64-bit support is only available in Windows 7 or later operating systems.

  You can find the printer specs below:

  Vista 64-bit is not supported.

  http://support.HP.com/us-en/product/HP-OfficeJet-Pro-6970-all-in-one-printer-series/8289585/model/11161264/document/c05061732/

  You must upgrade your operating system to a later version to use instead an OS 64 - bit, Windows Vista 32 - bit to insall or replace it with another printer, compatible with your operating system.

  Respect,

  Shlomi

• All-in-one OfficeJet Pro 6978: OfficeJet Pro 6978 creation for Vista 64-bit Home - where are the pilots?

  Hi - Install CD says operating system not supported. Cannot find drivers - that the reference to "Readiris Pro for HP 14". Support video says to look for hppiw.exe which I can't find on a HP site.

  Is the problem that the 6978 OfficeJet Pro cannot run with my operating system Vista Home 64-bit? I bought yesterday, so I can return it.

  This should be simpler, so THANK YOU for the help and advice.

  Hello

  The printer is incomaptible with Vista 64-bit.

  You can find the system requirements below:

  http://support.HP.com/us-en/product/HP-OfficeJet-Pro-6970-all-in-one-printer-series/8289585/model/11161264/document/c05061732/

  Kind regards

  Shlomi

• Office Jet Pro 8600: all-in-one Officejet Pro 8600

  Hello

  My Office Jet Pro 8600 all = 0n - one did a terible grinding noice when pulling back a page for double-sided copying. Do I nbeed something oil?

  Thank you

  Greg

  Hi @Valdavidian,

  Welcome to the HP Forums!

  I noticed that your HP Officejet pro 8600 deploys a creaking, after the attempt to copy double-sided. I'm happy to discuss this issue for you!

  "Try rolls of cleaning and the Firmware update by following the steps described in this guide, a ' paper ' or 'Pick motor stalled" Message appears and the printer is not Pick Up or animal....

  If this, or one of the posts on this thread, helped you to solve the problem, please click 'Accept as Solution' said post. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

  Hope this helps and have a nice day!