All-in-one Officejet Pro L7780: driver HP Officejet Pro L7780 will not install with Windows 10
Recently, my HP Officejet Pro L7780 stopped printing. I uninstalled the driver and then reinstalled the driver from the HP website. Every time, when installing, I get a message that "bing bar does not work on this version of Windows. Once the installation is complete, the test page is fine but I can't print from one of the applications (e.g., WORD, Adobe Acrobat, etc.), getting an "Error printing" message, rather than each time.
I use Windows 10. The printer was working fine since I've upgraded to Windows 10 until recently.
I've uninstalled and reinstalled the driver several times as suggested on the HP website. Any suggestions on how to solve this problem.
Hello @AMNYC2015and welcome to the Forums of HP, I hope you enjoy your experience!
I see that you are having errors in the print driver. I would like to help!
I recommend to remove the cartridges ink and starting by a power reset. Unplug the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug back in the printer. Make sure that you connect the printer directly to a wall outlet. Make sure to bypass any surge protector or power bar.
I also recommend running the HP Print and Scan doctor.
Good luck and please let me know the results of your troubleshooting operations. If this solves the problem, click on accept the Solution below, as well as others to find the answer.
Thanks for posting on the HP Forums!
Tags: HP Printers
I tried to install the L7590 Windows 8.1 but did not succeed. The printer was working well on Windows Vista, 7 and 8 before. After the initial problems, I deleted all the software with this printer. I did the following after this step:
-use the original installation CD (boot CD). I received the message that the OS is not supported
-use the "OJ_AIO_L7X00_Full_Win_WW_140_408.exe" file downloaded from HP support. There is a missing file, but no details of the reports.
Who can help? My suggestion is that HP should pick this up, probably because it worked fine under previous operating system.
Thanks in advance,
I have already downloaded this driver before, but it won't install. It unpacks, but then closes without any error message.
A new HP 8600 all-in-one works well after initial problems, but I want to have a printer of backup available in case the 8600 malfunction.
I'll still give it a try, but the other help is welcome.
Installation problems of Acrobat Pro XI on Windows 10.
Installation works until end - said to patch files 0 seconds remaining. Then, says roll back. Is not an error message. Nothing is installed.
Adobe 7 has been installed, but uninstall it before installing XI
Tried: disabling of antivirus, Adobe clean running, using the different admin account. reset,
Still get the same result
Click with the right button on the acrobat Installer > click Properties > compatibility mode > win 7 or win 8. try to install again.
Vodafone Dongle (Huawei K3770) advertising software. NetFramework 3.5 (versions 2 & 3 inc) must be installed via the internet - download 3.5 full version via Windows 7 will not install on Windows 8 Pro - tick Windows 8 Pro add features to install also calls to access the Internet - this own is almost useless without internet access and must be considered incompatible with Vodaphone Dongles and combination of dual-boot.
The upgrade on Windows 7 H & P (providing 7 is fully updated) works ok but degrades to the operating speed of the Hp Pavilion dv7 3111ea
Hi, I have activated. NETFramework 3.5 as explained above. The driver of the Vodafone Dongle loaded but when I connect, the PC gives the following error message and reboot: bad_pool_callerWhat can I do?
I have a 4280 printer all in one that works very well with Vista 32 bit OS. I really like the interface of HP. I had a Dell with Windows 7 Professional 64 bit desktop computer. I was able to load without any problems except the printer.
I downloaded the latest software of HP 64 bits for the device 4280. Installation takes place upwards the agreement "accept" screen and when I check the box to accept (name and c drive location, features to install, etc.) and then press the "continue" button disappears from the HP installation window. There is no reported errors or system events that I can find.
I tried all the suggestions on the site of HP for Windows 7 with no luck. I found Windows 7 install a driver immediately once you plug the USB connection. Tried a new printer / I drive with no luck. I tried Windows 7 32 bit with identical behavior that disappears. I tried safe mode and diagnostic mode in case something was interfering... same result. At least antivirus and firewall have been disabled and nothing else worked. I even ordered a CD from HP with the same result as the downloaded program. CHKDSK and scannow will find no problem with Windows.
I can run the printer and the scanner with windows drivers, but the interface, especially for the scanner is not functional enough. I get kind of work in a virtual XP environment, but it is very slow and a little less functional loading... vista vs XP I guess. In short not a viable solution. I could buy a new all-in-one, but I'm worried it will not install and this can become costly experimentation, not to mention my stock of the 4280 cartridge.
I would really like to find a way to get the HP software to install. Someone has an idea?
Hello again Tom5223,
I see that we still have problems installing the printer on your computer.
I suggest to call the HP Technical Support to see all the other possibilities for you. If you call in North America, the number is 1-800-474-6836 and for all other regions, please click here: click here.
A representative of HP has the ability to use more advanced troubleshooting steps and will be better equipped handle a problem like this.
Thank you for your time.
I recently bought a new HP Pavilion laptop and updated to 8.1 windows not long after the purchase. I tried to install my Officejet Pro L7680 all-in-one today and not failed on each attempt. The driver/software will download but when I try to install the software I get a message of "specified file not found." I called HP and spoke to a representative who informed me that my printer was too old and that it was not compatible with Windows 8.1 System. He said there was no update available for my printer and basically I have to buy a new printer. Wrong answer!
The issue is a file missing in the folder drivers to preload: Msiexec.exe
Please help me find a way to install my printer
Yes the anitivirus software could ask questions.
I'll make sure that it is turned off during installation.
Here is a url to temporarily disable all the startup programs to see if one of them is causing problems.
You must follow the same steps to reactivate all.
Let me know how it goes.
HP Photosmart 3210 will not install on a brand new desktop running Windows 7 Pro 64 bit. I downloaded the latest software, and when I run it, the installation window disappears shortly after it starts. No error message. I ran into several related issues lately. I can't install a ScanJet 5590 on a new laptop running Windows 7 Pro 32-bit. Said it ends, but nothing is installed. Could the fact that there are other HP printers installed on these computers (network printers) installed using driver only before attempting to install the software cause problems? I spent hours trying to solve these.
OK, much better progress!
If the software is always installed, tell him you'll connect later.
Go to devices and printers, look for the printer here, make sure you that no documents waiting to print and delete the printer if it is there.
Then go into Device Manager and remove all photosmart series 3200 drivers you find, you may need to click displays hidden on the view menu.
Thirdly, go back to the devices and printers. Select another printer, as the writer XPS comes with Windows. Along the top, with adding a device, add a printer, print server, you will see properties. What to choose and go to the tab drivers. If you have the HP drivers in there you do not, select them and choose delete and "delete the driver only."
Now restart and go to your Start menu and your HP folder. You must have installed the software, just no device driver, select "add a device" or "printer setup and software." Installation should complete without problem.
One last thing, you must temporarily turn off firewall and antivirus installation, in which case he mistakingly tries to block the attempt to install.
C5580 printer all-in-one. Pro Windows 7 64-bit OS, can't scan from my computer, when I try to install the printer driver I get a message that my system does not meet the requirements. Have a new Lenovo computer and upgraded to Windows 7 from Vista. None of the programs assistant HP have been transferred to my new computer.
I'm sorry the question was so embarrassing for you, but glad to hear that you are facing up and running. Please let us know as soon as possible if you encounter other problems, Best of Luck!
I'm unable to install a new printer of all-in-one OfficeJet 8600 Plus. I was running through the installation routine when it hit a barrier, that it cannot go beyond. I got the "Carriage jam" error message on the printer screen. I ran through HP Web sites and found one on the point: http://support.hp.com/us-en/document/c02919171
I did everything that the foregoing asked. I pulled the cart holding the ink cartridges and put again. I 'reinstalled' of the carridge another 3 times, and the third time, instead of seeign 'Transport Jam' once again, the machine began to re-start, but then got stuck on a new screen, that says 'printer preparation', with the logo of HP that swirled around, stating that it was ongoing. He spent forever, and when I tried to turn it off, it wouldn't let me, so I pulled the plug. When I plugged in again, I was back to "Carriage Jam". What can I do else?
The guy at Office Depot said to bring it back, and he would exchange for a new (I bought it today). I guess I will, if anyone has a better idea. Thank you.
Sorry to hear that you are having problems.
I totally agree with the guy from Office depot. If you are having problems on the first day, I strongly suggest that make you it
take it to a new. Don't waste your time trying to fix it because you may have a defective product.
These things happen because of several reasons that could happen anywhere bewteen from production to delivery.
I hope this helps! Sorry you had a bad first experience. Totally been there myself and I know how that feels.
I bought a Skylink® USB 2.0 802.11 g / n Mini adapter with 3dBi antenna wireless network. It will not install on my Windows XP Pro. Said A WLAN card is disabled. What? I don't know what that means. What can I do?
I suggest you follow the troubleshooting steps form the article and check if it helps.
How to troubleshoot wireless network connections in Windows XP Service Pack 2
Also check with Skylink® support site for more information about the issue.
I bought Acrobat Pro DC and it will not install on my computer. Just, I get an error message that says: "the Acrobat installer encountered an unexpected failure. Please try again. If it continues to fail, contact Adobe technical support. »
1. uninstall other programs of acrobat and adobe reader.
2. restart your computer.
3. clean using the following tool:
4 restart your computer.
5. install Acrobat Pro Dc using the following link:
Please also check the system requirements for Acrobat Pro DC:
I was updating from Adobe Acrobat Pro XI to Adobe Acrobat Pro Dc and it will not install nor use it or allow me to uninstall Adobe Acrobat Pro XI and even with creative cloud.
HELP HELP! I was talking from 10:30 to 14:30 today and still no luck. Microsoft contacted and they couldn't figure it out says to contact Adobe.
Could if it you please let me know what happens when you try to install Acrobat DC on your machine.
You get the error message during the installation of an upgrade to the DC version >?
What version of operating system do you work? Re you logged as administrator?
If you are a Subscriber CC, then you can try to install Acrobat DC here:
Please let me know if it helps.
On my officejet 6700 Premium, I have had trouble since the magenta cartridge was missing. I'm unable to print even if you select using black only, it appears on the screen that gives me the choice to order or cancel, it gives also this pop up if I try to scan documents to save to my computer and even trying to fax.
I am currently using Windows 7 Ultimate service pack 1
I am at a loss on it and a plan to buy a cartridge, but in the meantime all that I need is to use black and also to scan documents. Is there a way around this issue?
I'm sorry that you are experiencing this issue.
You will not be able to print WITHOUT this magenta cartridge. Some printers (older models) can print certain colors without another cartridge in the printer. The reason why it is not printing because this magenta blends in with all the other cartridges to perform a true black.
So if it was another cartridge, it would give you the same error message and do not print.
I am looking to buy this printer and I was wondering if it will work. HP Officejet Pro X576dw is compatible with Windows 10?
Hi HP supports,
I was wondering if someone adds a solution so that the
HP OfficeJet Pro 8500_A910_231 work in Windows 8
Consumer overview yet. Because every time I try to run the
Setup it tells me that this printer is not compatible with
My operating system.
Print and scan drivers for your HP OfficeJet Pro 8500 are already part of the overview of consumer Windows 8. You should be able to print and scan by simply connecting your OfficeJet to your pc.
Maybe you are looking for
Mozilla has worked great until yesterday.
So about a month ago I bought a pair of new headphones from Apple at the Apple Store, they worked very well until last week, they kept turning on my music and stop randomly and activation of Siri. First is was not often, but now if that happens const
I use the Pages more up-to-date on my macbook, but whenever I have pull up some documents, he says that he cannot find it for some reason any? I had no problem before, but all of a sudden does not work?
What settings do I announce in time?
I am new to labVIEW so any help is appreciated: I have a 100 txt files with two columns (separate tab) for a value of X and Y. I need the average of the values of Y to generate a single file and generate X against Y graph. So, how to read the data of