All in one printer 5510: old printer at startup error message

Hi all, I recently upgraded my printer Photosmart 5510 to 5540 desire. I installed a new printer and removed the old. Since then, I get this error message whenever I start the computer:

There is a problem starting: C:\Program Files\HP\HPPhotosmart5510series\bin\HPStatus BL.dll

The specific module could not be found

I tried to reinstall the old printer, I deleted again, I went through HP troubleshooting... nothing!

Someone has an idea? Thanks for your help.

Hello
From file Exploer type %appdata%\Microsoft\Windows\Start Menu\Programs\Startup in the address bar and press ENTER.
Delete the shortcut to monitor alerts for Non-Existing printer ink and the error should appear is no longer.

Kind regards
Shlomi

Tags: HP Printers

Similar Questions

  • My Office Jet 6210 all in one printer has an error message is displayed. "OX805dcc31 1309:fm_interpre".

    My Office Jet 6210 all in one printer has an error message is displayed. «OX805dcc31 1309:fm_interpre the printer will not be closed off the coast (unless I unplug it), and I can not get the error message to change.»  Any ideas what I can do?

    It sounds like a code of 'asserting' firmware, something really bad happened - the most probable hardware problem.

  • HP All in one Printer 4515: HP All in one printer 4515 Setup error

    I bought a HP All in one Printer 4515. I started installation, in order to implement, it worked fine, I scanned the page to adjust the calibration of the toner. During this time blue light which is used to the wi - fi connection always blinking since the beginning of the installation of the printer.  I do know that if the flashing is right, I found it strange...

    I downloaded the www.hp.com/ePrint/DJ4510 Installer and started installing.

    When I started to configure the wi - fi connection, I failed. Installation software wrote me to retry the configuration.

    I did and the printer display began flashing, he wrote to me that there is a mistake of the printer, and I have to stop him.

    So I stopped, but the blue screen appeared and he wrote: BV815424C. Because then I can not start even the printer, because when I press the power button and start the printer on the printer screen, the same message appears that I need to stop it and it is possible that this situation repeats itself all the time and the blue screen appears with BV815424C.

    This situation occurs for the second time. I have new bougtht printer 2 weeks ago and the same situation has happened, it's HP second All in one 4515 printer that I have instead of the first damaged...

    It is a problem of the printer and I need to return for the second time or is it possible to fix it?

    Hey @dijanas,

    Welcome to the HP forums! I hope you enjoy your stay here.

    I understand that you have some problems with an error code on your Deskjet Ink Advantage 4515 e-all-in-one printer. I can help you with that.

    To start, make sure that the printer is plugged directly into a wall outlet , not a surge protector. It is this document explains How to resolve error messages on your printer.

    If after following the instructions above, you are still unable to initialize the printer and the printer needs to be replaced. You can contact HP support by clicking here and filling out the form below.

    I hope this helps with the error message and I hope you have a great weekend!

    If this solves your problem then please help others to find this post by clicking on accept as Solution on my post.

    If you appreciate my help so please let others know by clicking on the icon below my post thumbs up.

  • Epson all-in - One Printer Driver Runtime error

    I'm having trouble with the installation of the printer drivers for an all-in-one Epson Stylus 7520 which is shared on a network.  When you try to install the software, I get this error:

    Runtime error!

    Program:

    C:\Windows\system32\spool\DRIVERS\x64\3\E_YATIHDA. EXE

    R6034

    An application has made an attempt to load the C runtime incorrectly library.

    For more information, contact the application support team.

    This error will continue regularly until I have turn off the print spooler in services tab.  If I use the print command in any program, this program will immediately freeze and require a force close by the Task Manager.  To completely uninstall the software print spooler must remain disabled, else it will give an error that it is in use.  After uninstalling using Add/Remove programs so that I have to manually go in system32\spool\DRIVERS\ files remove traces remains of the software (including the offending .exe program).

    When I say the machine to locate the drivers alone, it will bring up a window with the "WSD printing device" and an icon indicating that it is busy, which will eventually turn into a red X indicating that he failed to find a driver.

    Default Epson software package includes bells and whistles as a utility that monitors ink levels and checks the firmware updates, which inevitably cause this error.

    But Epson also allows you to download driver separately this package.  When I install just the driver, no error message appears, the computer communicates with the printer and use the functions scanner and fax without error (it displays its IP address, MAC address and even to send print orders), but it does not actually print a file.  The work appears in the status display of the printer on the computer, but eventually the delay and error.

    The machine that gives me the error is an Acer with Windows 7 Pro installed by the manufacturer.  It's a whole new machine.

    These same drivers work without error on a HP Windows 7 Home machine installed by the manufacturer, as well as several XP machines we are trying to eliminate out of use.

    Both machines also have a Konica Minolta printer installed that they will print to any question.

    After researching the issue, Epson insists that there is nothing wrong with their pilots, but I will communicate their support today.  If they come up with a solution I will try to remember to post it for the benefit of others.

    I have tried many suggestions available online without any change in the results:

    Tried uninstalling and reinstalling several times since the epson CD.

    Run windows update.
    Tried uninstalling and reinstalling several times with the latest drivers available on the epson site.

    Checked that I use the 64-bit and 32-bit drivers.

    Run "scannow" which gave no abnormal results.

    Delete all the files in the AppData/Temp folder

    Reassigned to the location of the temp folder.

    Tried to install with the Windows Firewall disabled.

    Removed from the McAffee trial provided with the machine entirely.

    I have not tried to uninstall and reinstall the software C ++ yet (as suggested in similar topics) that other users have pointed out, it does not solve the problem.

    In my case, this was due to a conflict with Acer Proshield. I removed Acer Proshield, then the driver is installed correctly.

  • Why is my HP photosmart all-in-one printer 4700 display error

    my hp C4700 printer has stopped printing I looked with printers on my computer, it is a green check mark but said error how can I erase it

    Questions like this belong in the Microsoft answers feedback forum because clearly, they are not your comments on the web site of answers.  I moved your post on the forum "hardware and drivers.  Please return to your message, click on modify under it and change the drop-down list of the Windows Version for your version of Windows people can help you to correctly.

    Explain where you see the error indicator.  It's on the front of the printer or somewhere on your PC?  If the latter, say what you're doing to see.

  • Can not install my new HP All In One printer

    Original title: CANNOT INSTALL a PRINTER ALL-IN-ONE COST of HP 5610

    EVRY TIME I TRY TO INSTALL A FRSH HP5610 ALL-IN-ONE PRINTER, I GET THE MESSAGE AFTER

    NO MISSING DLL FILES, SLBCSP, SCCBASE, GPKCSP ENUM I DOWNLOAD AND TRY TO INSTALL NOT NO CHANCE

    See if it helps:

    Error blocks the installation of the HP printer driver: sccbase.dll, slbcsp.dll, gpkcsp.dll and Enum
    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/error-blocking-HP-printer-driver-installation/5c7910a1-1b4b-404F-875e-12e092b07db1

  • Problem with the HP Photosmart C7280 all-in-one printing. Ink system failure could not copy-

    I'm having a problem on my HP Photosmart C7280 all-in-one printing. The following message appears, this is what came on the screen of the printer: ink system failure has not not able to copy, receive faxes or print. Refer to the documentation for the printer error O.cl9a0007.

    Does anyone have any suggestions?

    Hey Spider! First of all welcome on the forum.

    I recommend to remove all ink cartridges, disconnect the USB cable from the computer that connects to the printer and then turn off the printer completely by unplugging the power cord. Then, restart your computer. Turn on the printer but leave that he disconnected from the computer. After that he ended his power over the cycle forward and reinsert the ink cartridges in the printer and make sure their seat correctly.

    After you have all the cartridges in the printer correctly, then connect it to the computer. See if that fixes the problem. If not post back with no results.

    Thank you

    SeanS

  • HP 5510 Photosmart e-All-in-one printer will be no. Longer Print black

    I have a Photosmart HP 5510 e-All-in-one printer and after replacement of a black cartridge empty with a new, the printer will print is darker. I tried all the solutions on HP Support forum.

    I have inserted a new black HP (not a photo black) cartridge, provided it was properly ventilated and put, ran the print head, smear routines and the alignment of ink. I printed the status report (funny because he's white with the exception of a few areas of color). I printed the report quality - the colors were there but not black. I even restored it to factory defaults.

    My WIN7 laptop has the latest HP drivers and wireless printer is turned on and connected, so I guess he can receive firmware updates.

    It becomes even more strange that if I print from a printer (that is, the crossword) embedded applications it print a grey color with muted where (probably), it would be black.

    The printer is 5 months out of warranty...

    I see that a few other people have had the same problem. Is that what someone has solved?

    The steps of cleaning cartridge Print 3 - 4 times.  Try now.

  • HP C3100 All - In - One Photosmart: very old printer and drivers

    I know that probably the answer to this already, but here goes anyway. I have an old printer. HP all-in-One Photosmart C3100. He has just shot ten years old. I had some time after 2006, or at the least, it is the date indicated on the manual.  I just got a new computer to replace my computer that was about as old. I climbed up from XP to Windows 7.

    My printer, which works great, needs a driver and HP does not seem to do more. On their website, they say nothing more than ten years. I have no chance or is there anything else I can do?

    Thank you.

    Here is your support page.

    http://support.HP.com/us-en/product/HP-Photosmart-C3100-all-in-one-printer-series/1146511/drivers

    Click here to find your exact model number and check for the drivers and the software Win 7.

  • The divers of All in one printer HP 5510 & software will not install, how to find the correct drivers & software?

    I went on hp website just to find that there are no drivers available for download the printer fax copier are all in one and are supposed to be a plug-and-play type device using the USB port however turn on the printer and turn off disconnect the USB cable and reconnect the leaves still the device in operable sometimes that I get a screen that shows that the spores by the printers do not work at other times , I get an indication that Windows Explorer has closed the page down does anyone have an idea what I can do to install the drivers and keep them in place. From time to time I get drivers for the printer all-in-one HP 5510 fax copier scanner installed and then when I run a system scan and clean working files, it deletes the drivers, it may be something I am doing wrong, I don't know if anyone can give me an idea, I would love to appreciate thank you very much.

    Hello

    Download and install a HP 5510 all-in-printer driver and check if it works.

    http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&DLC=en&LC=en&product=311255

    Hope this information helps.

    Please let us know if you have any questions.

  • PC crashed... lost all info... lost the CD of installation for HP officejet 5510 all in one printer

    Hello, my PC crashed and I lost all added programs including my printer software printer works fine, I just need to add the software on the PC. Anyone know where I can get another CD of installation for a HP officejet 5510 all in one printer? HP customer service/tech service wants me to buy a new printer.

    Thank you

    Hi Sue,

    The link below is the full features for your printer software installer - save it to your desktop.

    http://ftp.HP.com/pub/softlib/software10/COL8901/MP-23606-3/gc_w01_ENU_NB.exe

    Once the download is complete, double click the installer to start the installation and it will proceed in the same way as if you had inserted the CD.

    Kind regards

    DP - K

  • HP Officejet 7310xi all in one: printer keeps repeating transport jam

    My printer do not print and indicates a carriage jam and told me to open the door and a cart clear jam but there is nothing there, and there is no paper jam. I tried to unplug the machine, its restart, restrting my MAC and the message still flashes. Does anyone have any suggestions. I know this is an old printer, but I love it and want to keep it going. Thanks in advance for any ideas.

    Hello

    Please visit the link below to fix the problem

    http://support.HP.com/us-en/product/HP-OfficeJet-7300-all-in-one-printer-series/391181/model/391190/document/c00304007/

  • 5740 HP e-all-in-one printer: how to change the destination for the scans folder

    I bought a HP Officejet 5740 e-all-in-one printer I connected wireless to a Win 7 PC. A month later, I added a new win 10 PC in my network (LAN), and I also installed the printer on this new PC. When I went to scan a document using the HP (NO Windows Fax and Scan) print software, the printer asked me which PC to scan to, and I chose the old Win 7 PC. The scanned image went to the folder My Documents\My scans of Win 7 PC, as expected.

    Two questions, both assuming I want to use the HP software to scan:

    1. is there a way to set a default value of PC to the computer target for digital images?

    2. How can I change the folder to which scaned images are sent?

    What are the answers to these two Qs if I decide to use Windows Fax and Scan instead of the printer software?

    Any help would be appreciated.

    Roy

    Hi Roy,

    Yes, you get a more integrated experience if you install the vs HP software by using the Add method of the printer.   And Yes, you should be able to do much more PC software rather than on the front panel of the unit.    And Yes, the aspect analysis software PC is much better than the Windows Fax & Scan.   Windows Fax Scan & gives a good experience of the box and is sufficient for many, but for those who want to do more, such a framing auto, rotate, reorder pages, etc... the HP scanning software is much better.

    I forgot what version of HP comes with your OJ5740 scanning, but we she recently rejected a new more complete solution that comes with the version that installs for your device recommended.   Here is a link where you can get that below.   I recommend you to install the latest web downloadable full version for your device first.   Then install this

    HP extended Scan

    FTP://FTP.HP.com/pub/scanners/HPScanExt/HPScanExt.msi for Windows.

    You'll then have two versions, one called "HP Scan" and the other called "HP Scan extended.   If you find that "HP Scan" looks like 'HP Scan expanded', while the product was the version latest (we drove to this new version about 2 years ago).

  • Upgrade to Windows OS 8.1 for all-in-one printer, HP Photosmart C4385 of Vista

    My old HP laptop used the Windows Vista operating system. All-in-one printer, HP Photosmart C4385 worked very well. I have a new HP computer that manages the new Windows 8 operating system and I can't load the printing software as the new operating system is incompatible with the printing software. It is certainly another available driver so I can use my all-in-one. Please let me know what the fix is far ahead, but a new printer.

    Hello

    Software for Win 8.1 can be downloaded from the link below.

    http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4158&LC=en&cc=us&DLC=en&sw_lang=&product=3651156

  • HP Officejet 5610 all-in-one printer have something that can be attacked by a virus?

    I have a "HP Officejet 5610 All in one printer" running Windows XP Home edition (32 bit).

    I tried to print a file that I had been sent and the printer began to print very slowly (one line / 5 seconds). At the end of the document, which had been printed was a load of rubbish! The next print was ok and printed at normal speed. BUT now, whenever I try to "Scan" a document using 'Microsoft Scanner and Camera Wizard', the 'Wizard' can take up to 1/2 hour to load when it is used for the scanner. If used for the camera the Assistant immediately.

    I downloaded and installed the latest HP drivers and still have the problem.

    Is there something inside the printer [ROM?] that can be attacked or is this a rare case to be an error of 'material' with a four year old unit. It is interesting to try to have it fixed or can I get a new camera? If so, which is recommended for a system of "consumption"? -Many thanks.

    Hi Semajleep,

    I would recommend printing HP and the Scan Doctor running. It is a quick and simple tool that diagnoses and solves many problems of printing, scanning and connectivity. See the link below for more information on how to download, install and run this tool:

    http://goo.GL/MzwLH

    I would like to know if this helps or not.

Maybe you are looking for

  • Configure the HTML validator in Firefox 15

    I have FireFox 15 and use the HTML tools and validate. I need to configure it to show all of the code and the number of lines that it validates. When I do tools change the line has options such as: http://validator.w3.org/check?verbose=1&uri= Where c

  • Apple health shows average "point of view of the year"

    Since iOS 9.3 the health of Apple shows average values in graphics display of the year. It used to be a monthly amount. Is this a bug, feature, editable? I don't like.

  • Satellite 1900-703: Swithces turns off

    In the end, the computer turns off when you(a) I'm trying to install Adobe Reader 7(b) I have try to use SystemSuite 5 tools or virus checkIn addition, although I followed all the correct instructions, the bios upgrade is not successful. I had a bad

  • Not able to connect to my netgear router

    I have my netgear router for almost 6 months now, and he has never given the satisfaction of a good wireless on the attic of my house. Repeaters wifi did not work, or are expensive for dual band. Now, I have connected my old linksys E3000 router, and

  • Why the programs are blocked when I connect and why get signed in several places?

    Windows Live Messenger is blocked when I connect and sometimes Google Desktop.How do solve this problem? Also I was also signed in more than one place. Can you help me?