All-in-one wireless printer Photosmart 109 n install problems with Windows 8.1

Similar Questions

• HP Deskjet 6310 all in one: Deskjet HP 6310 all in one wireless printing functions

  I have a HP Deskjet 6310 printer all-in-one and want to know if this printer has wireless capability (i.e., can this printer receive orders for wireless printing)?   (Note, I have a new MacBook Air wireless with send feature).

  @NickC3

  Your printer:

  All-in-one printer, HP Officejet 6310 range

  The printer specifications indicate the printer works with 2 USB, a wired Ethernet connection and - with an adapter - with Bluetooth to be printed.

  Thibault system requirements:

  • USB 2.0 full speed, front and back ports

• HP Photosmart B110 all-in-one: wireless printing is not possible

  Hello

  I have my printer connected to my desktop via USB and other computers connect using my wireless network. Sometimes printing from one of the other computers works, sometimes it doesn't.

  If printing does not work I have check the printer and it is connected to the correct network and online. I check the IP address and all withdrew. The computer that I use to print is connected to the same network and sees the printer as being online.

  If I send a document to print, it is added to the queue, and then sits there. With the status of"impression". But nothing happens...

  Today, I tried to delete the printer and add it again. Still no luck. What is going on?

  Hi @Plantje1978,

  Welcome to the HP Forums!

  I understand that you can not print with your HP Photosmart B110, on 10 of Windows wireless. I'm happy to discuss this issue for you!

  Please, try the following steps:

  Step 1: Check if the printer is paused or offline

• Connect the USB cable on my 5510e-all-in-one wireless HP Photosmart printer

  Need me 15 minutes to print a page using my network wireless at home. I decided to connect the printer with a USB cable, but the installation of HP - written installation guide - instructions only show the USB wireless method. I already bought a SPEAKER cable so I'm readt to go one time that I get help. My laptop, that I intend to connect is a dp4 Pavilion from HP with Vista. Thank you.

  Hi there billham68 and welcome to the printer HP consumer Forums.

  Here is a link that should help you in the accomplishment of the task at hand.

  Installation of the software of the printer in Windows for a USB cable connection

  http://support.HP.com/us-en/document/c03521864

• Fax: HP Officejet 8600 more (all in one wireless printer) operating system: windows 7 64-bit router/DSL Modem

  It's my second printer of HP wireless. the main problem and the only problem is that whenever my phone rings responses of fax, which is very annoying, on hearing the tone while trying to answer the phone.  I followed the instructions exactly.  Have configured fax to answer on the 6th ring... auto answer set OFF... and yet he answers at all times when the phone rings.  I tried to turn off the printer and it happens again... even when the PC and the printer are out of service happens.

  I'm on a DSL line with phone... have voicemail... have a home network...

  Hello

  Given that you have tried to put off the printer and it still happens, I can hardly believe it's the printer the fax must be turned off, as all the other features of the device.

  Please try to disconnect the telephone line from the port fax 1LINE and try the composition for your phone line... You will hear a fax tone?

  If so, I'm afraid, he's probably not coming from the equipment to HP...

  If you can see any change, reconnect the printer... Make sure that you connect the cable in 1LINE and not in any other port by mistake...

  Also, make sure that you connect the cable from the phone using an ADSL micro filter... Make sure that the printer connected to port telephone filter and not in the ADSL port by mistake.

  Please let me know of any changes,

  Shlomi

• HP Officejet 4500 all-in-One wireless printer

  The OP is win7 64-bit.  Control Panel to say 'NOT INSTALLED driver FOR THE HP3CC282 (HP OFFICEJET 4500 G510n-z). However, the properties of the printer show that this version of the 6.1.7601.17514 driver is installed. Why he says miss me the driver when properties shows me it's there?

  OK, go ahead and uninstall the software from the Control Panel, and then install the full feature software.

  Once you have installed the software, let me know when the printer is connected and you can print.

• 2540 HP all-in-one: how to check the level of ink with windows 10

  Well well, after 7 years using windows XP pro and my various printers HP over the years, I've always been able to instantly use my HP printer on the screen to see the ink level... I would go to programs... Find (printer todays) 2540 HP... Then click the icon to see my ink level...

  This is not the case with my windows installed 10...  I can print ok, but where is the Maintenance factor?  to clean the heads or see the ink level?

  I suggest that you remove all HP 2540 programs and then re-install thesoftware WIN 10 full.  Bwtween your WIn 8.1 and upgrade an error happened.

• I'm trying to connect my Canon MG5200 wireless printer to my new HP laptop with Windows 7 Home Premium.

  The printer is connected to my office and is a part of my network. However, I tried both the printer installation and troubleshooting (which is what he says, he need next to the State of the printer on the network) and none of the options worked. Suggest me you think I try?

  You do that?

  "Program to load the CD supplied with the printer. This CD should be installed in each computer or laptop that needs access to the printer. Once the CD program is installed, the router connected to the main computer will allow each computer or laptop to locate the signal of the printer. »

• Photosmart all-in-one wireless B109n - problem with detection of the cartridges

  I just bought a Photosmart all-in-one wireless B109n. implementation proceeded without problems (including printing test photo).

  When I tried to use it later, he said that the cartridges were not detected.
  Strange thing is that when I take one of 4 cartridges, it says that one is missing. After you have added the last of them, he says that none of them are detected.

  Also, I need to re - enter the language and area whenever I turn it on. As if it's reset instead of make a cut...

  How this can be solved?

  Back to the store where I got it.

  They saw the same thing I had met and gave me a new without much fuzz

  The new works very well

• Impossible to install my new HP Deskjet 3545 printer all-in-one wireless

  I bought the printer HP Deskjet 3545, printer all-in-one wireless on August 13, 2014. When I tried to install the printer for USB connection after downloading the software from the CD provided with the product, it displays the message... "" Cannot install hardware, module HP Deskjet series 3540 is not found. ""  Help, please

  Problem solved.  Problem was with my operating system.  Upgrading to windows 7 and the printer is installed. Thank you all.

• 6500 printer all-in-one wireless

  I am a 73 year old who has learned to use a computer later than most. I know not enough for operating a computer, but I am not a technician. I bought a 6500 all in one wireless and worked with her for two weeks and could never make it work so I took it back. I love what did the printer, if only I could get it to work properly. I don't know that I'm the problem and not the mechanism.

  When I loaded the software on two computers, they would work wirless, but the bureau which has been connected to the router does not recognize the printer. After that all efforts exausted the mistake of reinstalling software would be developed. If I used the usb cable to load the software into the computer connected to the router, it would work, but the wireless would not work. Same error message. After thinking about this topic, I think I told the installer to use the usb cable in the router computer which clogged to the top of the installation wireless for the other two and the opposite for the spoiled wireless units a cable installation. I never tried plugging the eithernet cable.

  I would like to start again and see if I can feel comfortable to install. If so, I'll go and rebuy to the printer.

  My situation: I have a desktop Dell that is connected through router a BEFW 11 S 4 Linksys. My incoming signal is provided by Charter Communications cable. I have another unit of Dell desktop at home and a laptop that I want to connect wireless.

  Question: Can I connect the printer directly to the router with an eithernet cable and run the other two wireless units? I learned by a sales person (after that I came back from the printer) that if I simply connected the printer to the router thur the eithernet port it would be on my network and the Bureau recognise. Then the other two computers would connect wirelessly.

  Had no answers. Did you get any help. The printer took over and my money back. The pain is useless. Thank you very much.

• HP Deskjet 4535: Problem of Hp all-in-One remote printing

  Hello

  I bought a Deskjet 4535 all-in-one last week and there was a problem printing word document using the all-in-one remote application via the iphone.   Impressions of thin paper thorigh the laptop wireless, but when you use the remote, the content document appear to have shrunk - while there were four pages originally, now the output is adapted in three pages, with the smallest font size.   I tried to manual pagebreaks on all four sides, but it still shows the same.  Document has been prined in the dropbox, both laptop & iphone folder.

  Help, please.

  Hey @drappoo,

  Welcome to the Forums of HP Support!

  I understand that you have some problems with printing from the HP all-in-One remote app on your iPhone to your Deskjet Ink Advantage 4535 e-all-in-one printer. I can help you with that.

  What is happening, that is when printing from your iPhone or iPad, that the camera takes a picture that is displayed on the screen and print it. If things appear smaller so he has to solve is to change the size of the text to a larger size, and then change the zoom on the camera settings. Once you do this, you should be able to print all the greater.

  If you're still not print correctly, by uninstalling and installing the HP ePrint app should help you with that.

  Please let me know the results after following the above. If you are able to print properly, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• HP All in One deskjet printer: X HP

  I have my HP all in one Deskjet Printer 3522 programmed to Eprinting from my cell phone wireless. I want to add a second computer to wireless network for Eprinting.  What are the steps to add the second computer.

  I had taken these measures as soon as possible.  As stated earlier I just needed to create the homegroup and get matching password on both computers. Once everything very easy, I determined the steps to follow. Printer works on both computers.

• Error of 4500 HP all-in-one wireless Wep

  I installed the printer HP 4500 all-in-one wireless.  He acknowledges the Apple network and then ask to for the WEP key.  I enter this code and it says invalid WEP.  It is not the wrong password... Help!

  If you are using Snow Leopard or Lion and you have the HP software before Snow Leopard (either from a CD not marked as compatible with 10.6 or you recently upgraded to Snow Leopard or Lion and had the software HP on your Mac before you upgrade - even if you made a standard from the old software uninstaller or installed new software on top of it) , you must uninstall the software by using the "scrubber":

  Go to Applications/Hewlett Packard / click Uninstall HP
  Click on continue
  Highlight your device in the left pane
  Press and hold Ctrl + Alt + Cmd keys on the keyboard at the same time as you click on uninstall< this="" is="" the="" scrubber="" option,="" there="" is="" no="" button="" labeled="">
  There will be a pop up that asks if you are sure you want to uninstall all hp software. (At this point, if you continue, all HP printers you have installed will need to be reinstalled)
  Click on continue and let it finish

  Restart your Mac

  Now reset the printing system:

  -Sys Prefs, Print & Fax
  -Right (control) click inside the box that lists your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign + to add again. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

• HP6500 all in one wireless Cup middle of page

  We recently bought an all in one printer wireless hp 6500 for my work, after the support of spending 2 days on the phone with tech we have installed, it worked great until we went to print from our quickbooks and it will show only half of the page... and I don't think its quickbooks because it does randomly with other programs. I really need a solution and don't want to call technical support again. Help!

  Only, we got rid of our nightmare week 2 HP 6500 all in one POS... We have replaced by the Lexmark 7600 Series all-in-one wireless and absolutely NO problem installing or printing, scanning, fax, copy and it was cheaper to boot. DO NOT BUY HP WIRELESS PRINTERS!