all laserjet printers: print

Similar Questions

• LaserJet pro m127 fn: impossible to analyze by using HP all-in - One Printer Remote android app.

  Hello

  I use Hp all-in-One Printer Remote android app, Print function works fine but scanning works nor on my phone (4.4 KitKat) or Tablet (jelly bean 4.1).

  analysis function works by using my laptop (Windows 7)

  Help, please.

  Hi @EslamHassan

  Welcome to the Forums of HP's Support. I think that you have a question about the HP all-in-One Printer Remote app.

  The LaserJet M127fw printer is not a printer supported for the HP AiO application. I have included the HP printers and Mobile Printing Solutions support document for reference.

• COLOR LASERJET MFP M177FW PRO: nto all 4 colors printing

  greetings to you all, I have bein using my laserjet color mfp printers pro m177fw very do well no problem, but all of a sudden it does not print colors, including black and I check all the settings and hey there all ok so guys please help me solve this problem

  Hi @B_J1,

  I read your post and see that you are not able to print one of the 4 colors. I want to help you.

  Try and print a self-test on the printer hardware to see if it is a hardware or software problem.

  HP Color LaserJet Pro M177fw MFP and printer HP LaserJet Pro MFP M127fw and M128fw printers - print a Configuration report.

  Please, try the procedure described in this document to see if it will help to solve this problem.

  The problems of print quality for the HP Color LaserJet Pro MFP M176n and M177fw series printer.

  What operating system do you use?

  Mac OS X: how to find which Mac OS X Version is on my computer?

  How to find the Windows Edition and the Version on your computer.

  How is the printer connected? (USB, Ethernet, WiFi)

  You use Genuine HP Toner?
  What are the levels of toner?

  If you appreciate my efforts, please click on the "Thumbs up" button below. Thank you.

• Vista and Color Laserjet 5 M reprints all when the printer is turned on?

  Vist and Color Laserjet 5 M reprints all when the printer is turned on?

  It is a new one on me. I installed the printer with a barrette SIMM Postscript so it would work even at all under Vista and now it prints well but insists on the fact that I have all re - print he has never seen a reason any whenever I turn the printer to print something again.

  XP he has never done that, but I've always had the document cannot print the error that I ignored as he did print correctly.

  Google has not really revealed anything?

  ?? Type response level 1 I was looking for... These printers are a full restart, test of memory and when it is off.

  But I think I solved it, spent some time on google and there was a suggestion on the spooler in vista, was something like clear keep printed documents or print spooling first, I went also to start printing after the last page. Who took care of a lot of it somehow. Not sure why the generic installation program would need to be changed here. Possible I did for me somehow when I was trying to get the thing to work with the PCL driver too.

  Then I noticed that whenever I turned on the printer it is printing a page of demo postscript, for some reason any, it is enabled by default in the SIMM option. Turn power off and now its not wasting so much paper now.

  So two things to look for in the computer and the printer.

• Apparently, I got an automatic update of Windows XP. All of a sudden my computer does not connect to my HP Laserjet 1000 printer.

  All of a sudden my computer does not connect to my HP Laserjet 1000 printer. These work very well together for several years.

  Now all of a sudden I get a message that the computer cable is not connected.  I tried to charge the printer program.

  I unplugged and reconnect the cable to the computer, etc.. The system does not work.

  I learn by two other people, who have automatic updates of Windows, they had the same problem. We have a Kodak

  printer and the other has a Lexmark printer. This makes me think that the problem is in the updates of Windows.

  So, what should I do to fix this? I'm NOT a computer person and I'm confused.

  James

  Hello

  · The updates have been installed on the computer?

  You can follow the procedure from the following link: printers HP LaserJet - USB Devices closing work unexpectedly in Windows XP: http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=110&prodSeriesId=45674&prodTypeId=18972&prodSeriesId=45674&objectID=bpl11421

  You can also access: family of products HP LaserJet 1000 - Error Messages on the computer (PC): http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=110&prodSeriesId=240170&prodTypeId=18972&objectID=bpl11045

• Software all-in-one printer HP LaserJet Pro CM1415nfw does not load

  Software solution complete all-in-one printer HP LaserJet Pro CM1415nfw (CD or download) does not correctly load on my desktop running Windows 7 Professional 64 Bit. After I bypass payment the contract of the software, loading software hangs on the 70% mark and I get the following message:

  "Error message: a problem occurred during the preparation install the software." If please restart your computer and run this installer again. If the problem persists, please visit the web site of product support for your product. MSIExec command: /i "C\CM1410_MFP_Series Solution\Setup\Core\SIPM_64 based |" HpTcpMon64.msi"/qn REBOOT = ReallySuppress Path: return code: 1603"

  The CD software did load on my laptop which runs on Windows XP, SP - 3.3 and the printer works as expected.

  Uninstall other software printer and disconnect them. Then try to load the new software first.

• HP Color LaserJet 2800 all-in -: how to remove the old Imaging drum for my HP LaserJet 2840 printer to install a new

  I have some new imaging drum for my HP Color LaserJet 2800 all-in-one printer series, please tell me how to remove the old.  Thank you.

  See the link below:

  http://h20564.www2.HP.com/hpsc/doc/public/display?docid=emr_na-c02850160

• HP LaserJet 4300 prints gibberish for a single user, but prints OK for all others on a Windows 7 32-bit

  HP LaserJet 4300 printer installed via LPT1 using Universal Print Driver v5.2.6.9321 on a desktop HP 8100 running Windows 7 Enterprise 32-bit SP1.

  This printer prints gibberish for a particular user, any type of document that it tries to print.

  Not sure when the problem started, the user uses a network printer to work around this problem. It allows to print to one of the other HP printers on our network OK, including another 4300 in the hallway.

  Everyone can connect and print the documents themselves OK on this office using this printer.

  Tried to restart the HP 8100 and power cycling and off the 4300. Also uninstalled and reinstalled the 4300.

  I have updated the firmware on the 4300.

  Change the print processor in the printer properties did not help either.

  Analysis of virus and malware detected any problems.

  Any advice for this problem would be greatly appreciated.

  Hi MDOTd5-247,

  The product that you have is a printer. I suggest you post in the forum for HP Business Support for a better chance to find a solution.

  Here is the link to the Board Commercial Laserjet:

  http://h30499.www3.HP.com/T5/printers-LaserJet/BD-p/BSC-413

• HP Laserjet P1606dn: Printer offline

  Everytime I go to print, or the printer will automatically print letters nonsense at the top of each page (printer continues to fuel the continuous pages unless I have stop) OR it will say it is disconnected. Recently, my husband removed the printer in system preferences to start a clean slate. For some reason, now, the printer cannot yet be read to add in the preferences system (printers). All solutions? Thank you!

  Hi @RAKLER,

  Welcome to the HP Forums!

  I read your post that your HP Laserjet P1606dn printer keeps going offline. I'm happy to help you!

  Please, try the procedure described in this guide, "printer offline" or "printer not responding" Message (OS X)and let me know the results!

  If you are unable to reach a resolution, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

  I hope hear from you soon!

• Cannot get LaserJet M175nw print in a network

  I just installed a new 100 Pro M175nw LaserJet printer on my network. However, I am unable to print over the network.

  • The printer is connected to an ethernet cable and configured with a static IP address on the network
  • I use a Windows 7 computer for printing
  • All of the internal functions of the printer work properly for example copy, reports
  • Printers when connected via USB to a computer

  When you use the printer over the network:

  • Digitization of works correctly
  • The integrated mangement of the printer web page works correctly
  • HP Print & Scan Doctor diagnostic tests give the configuration all green ticks
  • Print jobs stay in the queue until they change to an error state.
  • The printer does not recognize the print job at all - no progress message indicating the print on the console document
  • If the printer is in mode 'sleep' it doesn't wake up
  • Print test pages from the installer of HP, the Windows printer properties dialog box, Acrobat Reader and MS Word all fail.
  • All the symptoms remain the same when I turn off the Windows Firewall
  • An another HP LaserJet 2605dn printer on the network will print correctly on a different IP address, but also using the raw format on port 9100.
  • I removed all the drivers for other HP printers in case there was a conflict - no change after you have reinstalled the software.

  Can anyone suggest what I might have forgotten?  Thanks for your help.

  Problem solved.

  Critical steps seem to be:

  • I used the printer management web page (Networking / advanced) to "restore all network settings to their factory default values.
  • I then used the printer console to set the desired TCP/IP configuration - static IP, subnet mask, default gateway. No other changes.
  • The printer then worked correctly.
  • Later, I put the hostname and disabled all network services that I did not - like IPv6, Hello - and the printer continued to work properly.

  The configuration of end result is identical to what I had until I can see - but it works now.

  Thanks for your suggestions along the way.

• HP LaserJet Laser printer 1100 with Win7: print quality

  Have managed to connect HP laserjet 1100 printer for Windows 7 via a USB cable and it prints... BUT the quality, it is as if its in EconoMode... and none of the other options quality is visible in the property settings... Just an option to have default EconoMode and toggle... I tried each of these options, but the quality is still fake.   In all other respects, that the quality is very good just the feintness.

  Suggestions that the HP printer is the best I've had to a simple though 12 years old print

  Hello

  The number you gave is a serial printer.

  The HP you can use information in this link from HP.

  There is troubleshooting information, Setup and installation, use, etc. in the left column.

  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?lang=en&cc=us&prodNameId=14925&TaskID=135&prodTypeId=18972&prodSeriesId=25470&lang=en&cc=us

  See you soon.

  p.s. Here is a link to the HP printer Support Forum if you need additional assistance.

  http://h30434.www3.HP.com/T5/printers-and-all-in-ones/CT-p/inkjet

• I FORGOT the ADMIN PASSWORD FOR - (WEB PAGE) - HP Officejet Pro 8600 Plus e-All-in-One Printer - N911g

  Hi all

  I changed my network SSID & PW but I forgot the password for the printer web page.

  Password was written in a notebook and notebook is moved at the moment by the cleaning person.

  Please HELP! Is there anyway I can reset the printer so that the admin password is also re-set. I try to reinstall the software printers, also I am not able to change the ip address and right now, there is no ip address... get no link and no ip address and no network... Please anyone who can help... Please help.

  * I read some part... to power off the printer, then press the power button on... and continue pressing the back button where he would have, for some time the printer is back back (it was to reset the printer)... which is about 23 times... zero.

  I really want to THANK you ALL for READING THIS & YOUR TIME. So please help if you can...

  and ideas?

  Thank you, xxVEGASxx

  * xxVEGASxx *.

  You can do a reset of the printer using the LED screen on the printer.

  Select Configuration, then Tools, then restore the default settings. "Restore default settings" is the last element of the list and you will have to scroll down to see it.

  Which erases all settings, including the password for the printer.

  To reset you describe is probably the one mentioned in this article:

  http://resetprinters.com/how-to-reset-the-HP-OfficeJet-Pro-8600-premium-all-in-one-printer/

  but it's probably a deeper reset that you really need anyway.

  -Seth

• HP 5740 all-in-one: print HP 5740 Air has stopped working

  Well worked for 8 weeks, now when I try to print a page of reception or what ever, it shows all the print pages option, shows the name of the printer, but nothing happens to the printer if I ping the printer, it will not receive all the packs to date, the router receives all packets, I printed out the Page of Configuration of HP network , it showseverything turned on and connected.

  Hey @jmichaelmcf,

  I see you have some problems with your Mac OSX 10.11 machine printing to your Officejet 5740 e-all-in-one printer. I can help you with that.

  To start, make sure that the printer is connected directly to a wall outlet, not a surge protector. Once done:

  1. Turn off the printer and the Mac.
  2. While the devices are turned off, disconnect the power cable from the back of the router for a minute.
  3. When the lights come back on the router, turn on the printer and the Mac.
  4. On your Mac, click on your Apple icon, system preferences and printers and Scanners.
  5. Hold down the CTRL key and click the icon of your printer on the left.
  6. Click on reset printing system.
  7. Click on the button "+" at the bottom left.
  8. In the window that appears, select your printer in the list.
  9. Click in the box next to and select your printer from the list.

  Please let me know the results of the rest of the foregoing. If you are able to print, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• How do you know if there is a compatible with El Capitan printer driver before buying the all-in-one printer?

  My all-in-one printer scanner Canon MX 860 lost the ability to print from the computer, now that I've upgraded to El Capitan. It didn't happen immediately, but now the buttons 'research' went to Canon interface, and the interface of the Apple System. (I spent half a day on troubleshooting, reset and download the drivers from Canon without success.)

  I want to buy a new all-in-one printer... (not Canon, thank you). I need to be sure that there is a 'friendly' pilot El Capitan before I buy and connect my printer. Interfaces for printer drivers are configured to "detect" my printer before the printer list is revealed. I checked Apple's site, but the model numbers are not exactly the same as the units that I compare before you buy.

  I am currently in Singapore where items back isn't something they do unless it is non-functional. You have chosen it, it works, you buy it, it's yours. I need to be sure about the drivers before you have the machine.

  See this link for compatible printers.

  Printer and scanner software available for download for your Mac - Apple Support

  Personally, I use Epson, configured as Airprint and have no problem.

• HP Photosmart Premium all-in-One Printer - C309g dose it supports eprinting

  dose

  All-in-one printer, HP Photosmart Premium - C309g eprinting airprinter support

  Hello

  Great question, I have attached a link below that shows what printers support missions/ePrint AirPrint.  There is another option for the HP Photosmart Premium so depending on your model, which houses the ePrint and Biz.  There is more information on this subject on the ePrint link below.

  Good luck!

  http://h10025.www1.HP.com/ewfrf/WC/searchresults?tmp_product=HP+Photosmart+Premium+All-in-One+Printer+-+C309g & Product = 3793676 & tmp_qt = ePrint & CC = US & DLC = in & LC = in & Submit=.