All metro UI apps windows does not just keep trying to load

Hi, for the past 2 days, all my windows metro UI apps do not work (messenger, mail, people, bing, etc.). However applications 3rd party like Tweetro works very well. I want to try to uninstall applications, BUT the app store window does not work too. Can I know how to solve the problem? When I click on the apps UI subway windows, all I get is a loading screen which doesn't stop loading. Thank you.

Honestly I've read a lot about this. There are so many messages that MS needs to make some kind of announcement. There are many theories about what is causing the issue, and most of them seem to be centered around the antivirus, firewall and other. I read that Windows 8 has strengthened its security and protection with Windows Defender anti-virus. I had the same questions as everyone else. My metro apps wouldn't work. Click it, you get a splash screen, and then it seems to be load with points of spinning in a circle and that's all I could get. I worked on this for 2 days and with extreme frustration. I took some advice from some other people having the same problem and I completely uninstalled Mcafee Security Suite, rebooted the computer and low and behold, that resolved 'my' problem. As for others, I can't say. I've never once refreshed or borrow. I wish I had done just a couple of days! I hope you make the right decision for yourself. I have now no antivirus 3rd party anything on my system. I'm a careful Internet user when it comes to the internet and I stay away from any type of file-sharing sites. I hope this does not come back and bite me. Good luck!

Tags: Windows

Similar Questions

  • Since a windows 10 update on 09/12/15 my lightroom app will does not start I tried signing and return in, restart, reload the application, it will not start either from the desktop or the app cloud have other people encountered this problem?

    Since a windows 10 update on 09/12/15 my lightroom app will does not start I tried signing and return in, restart, reload the application, it will not start either from the desktop or the app cloud have other people encountered this problem?

    Hi rogerk94701487,

    Could you please check the event viewer and let me know the path of the defective Module once.

    How to check the event viewer: Photoshop CC 2015 crashing very frequently

    Kind regards

    Tanuj

  • my browser cannot open google and facebook and other https sites that it does not open even the app store does not work, I tried to change my DNS google DNS and disable IPv6 but still no use, help PLZ!

    my browser cannot open google and facebook and other https sites that it does not open even the app store does not work, I tried to change my DNS google DNS and disable IPv6 but still no use, help PLZ!

    You may have installed one or more variants of the malware "VSearch' ad-injection. Please back up all data, and then take the steps below to disable it.

    Do not use any type of product, "anti-virus" or "anti-malware" on a Mac. It is never necessary for her, and relying on it for protection makes you more vulnerable to attacks, not less.

    Malware is constantly evolving to work around defenses against it. This procedure works now, I know. It will not work in the future. Anyone finding this comment a couple of days or more after it was published should look for a more recent discussion, or start a new one.

    Step 1

    VSearch malware tries to hide by varying names of the files it installs. It regenerates itself also if you try to remove it when it is run. To remove it, you must first start in safe mode temporarily disable the malware.

    Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for other instructions.

    Step 2

    When running in safe mode, load the web page and then triple - click on the line below to select. Copy the text to the Clipboard by pressing Control-C key combination:

    /Library/LaunchDaemons

    In the Finder, select

    Go ▹ go to the folder...

    from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

    A folder named "LaunchDaemons" can open. If this is the case, press the combination of keys command-2 to select the display of the list, if it is not already selected.

    There should be a column in the update Finder window. Click this title two times to sort the content by date with the most recent at the top. Please don't skip this step. Files that belong to an instance of VSearch will have the same date of change for a few minutes, then they will be grouped together when you sort the folder this way, which makes them easy to identify.

    Step 3

    In the LaunchDaemons folder, there may be one or more files with the name of this form:

    com Apple.something.plist

    When something is a random string, without the letters, different in each case.

    Note that the name consists of four words separated by dots. Typical examples are:

    com Apple.builins.plist

    com Apple.cereng.plist

    com Apple.nysgar.plist

    There may be one or more items with a name of the form:

    com.something.plist

    Yet once something is a random string, without meaning - not necessarily the same as that which appears in one of the other file names.

    These names consist of three words separated by dots. Typical examples are:

    com.semifasciaUpd.plist

    com.ubuiling.plist

    Sometimes there are items (usually not more than one) with the name of this form:

    com.something .net - preferences.plist

    This name consists of four words (the third hyphen) separated by periods. Typical example:

    com.jangly .net - preferences.plist

    Drag all items in the basket. You may be prompted for administrator login password.

    Restart the computer and empty the trash.

    Examples of legitimate files located in the same folder:

    com.apple.FinalCutServer.fcsvr_ldsd.plist

    com Apple.Installer.osmessagetracing.plist

    com Apple.Qmaster.qmasterd.plist

    com Apple.aelwriter.plist

    com Apple.SERVERD.plist

    com Tether.plist

    The first three are clearly not VSearch files because the names do not match the above models. The last three are not easy to distinguish by the name alone, but the modification date will be earlier than the date at which VSearch has been installed, perhaps several years. None of these files will be present in most installations of Mac OS X.

    Do not delete the folder 'LaunchDaemons' or anything else inside, unless you know you have another type of unwanted software and more VSearch. The file is a normal part of Mac OS X. The "demon" refers to a program that starts automatically. This is not inherently bad, but the mechanism is sometimes exploited by hackers for malicious software.

    If you are not sure whether a file is part of the malware, order the contents of the folder by date modified I wrote in step 2, no name. Malicious files will be grouped together. There could be more than one such group, if you attacked more than once. A file dated far in the past is not part of the malware. A folder in date dated Middle an obviously malicious cluster is almost certainly too malicious.

    If the files come back after you remove the, they are replaced by others with similar names, then either you didn't start in safe mode or you do not have all the. Return to step 1 and try again.

    Step 4

    Reset the home page in each of your browsers, if it has been modified. In Safari, first load the desired home page, then select

    ▹ Safari preferences... ▹ General

    and click on

    Set on the current Page

    If you use Firefox or Chrome web browser, remove the extensions or add-ons that you don't know that you need. When in doubt, remove all of them.

    The malware is now permanently inactivated, as long as you reinstall it never. A few small files will be left behind, but they have no effect, and trying to find all them is more trouble that it's worth.

    Step 5

    The malware lets the web proxy discovery in the network settings. If you know that the setting was already enabled for a reason, skip this step. Otherwise, you should undo the change.

    Open the network pane in system preferences. If there is a padlock icon in the lower left corner of the window, click it and authenticate to unlock the settings. Click the Advanced button, and then select Proxies in the sheet that drops down. Uncheck that Auto Discovery Proxy if it is checked. Click OK, and then apply.

    Step 6

    This step is optional. Open the users and groups in the system preferences and click on the lock icon to unlock the settings. In the list of users, there may be some with random names that have been added by the malware. You can remove these users. If you are not sure whether a user is legitimate, do not delete it.

  • My Creative Cloud Apps window does not give me an option to install the previous versions

    Don't know why but my Creative Cloud Apps window gives me an option to install the previous versions. Any ideas? I just recently installed creative cloud and I'm connected with my Adobe ID on Windows 7 Professional.

    No where help or support information said that previous versions are only available if you are currently subscribed to the current version.

  • How Windows App Store does not start (I tried "everything")

    It's just my story. The OP may be completely different.

    The research on the net I saw that many people suffer the problem described, that is to say the App Store apps and win 8 crashing. So I was hoping that a solution could be found.

    That's all just amazing! I have the same problem with exactly the same results. It doesn't seem to be a solution without refreshing. I can't access the Windows store, I'm stuck with Windows 8 and cannot move to 8.1. I tried several times to pass to 8.1 when I could go to the store, but it failed every time with an error code OxC1900101-Ox20017. Any suggestions as to what this error is and how to fix it. So, I seem to be stuck with Windows 8 until Windows 9 comes out. I am not convinced that this will present all kinds of new questions. I can't understand why Microsoft cannot fix this easily because he seems to have been going on for at least a year. I hate the idea of how much time I wasted on this. My only saving grace is that I can return to my laptop with Windows 7... happiness!

  • HP OFFICEJET J5750 ALL-IN-ONE: 10 WINDOWS DOES NOT RECOGNIZE MY PRINTER

    I tried to print my documents without result.  Nothing prints; I tried the test pages, word documents, etc.  I followed several directions that now I am totally confused.    When I go to print devices, everything is as it should.  I tried to add a new printer and it WOULD NOT print either.  I need help - please!

    Thank you for your answer; so far, it seems that I have work.

    v/r, Nita

  • Grandsons HP Pavilion just out of guarantee does not just keeps turning.

    Typical just out of warranty.

    only failure was that did all the test on the Bios

    OLU2JM - 6MG 788 - MFPWXG - 61U403

    and gave a number of product E3B42PA #ABG

    The laptop started to take a while to load, and then more than a week got slower until in the end it never fully loaded just the HP and turns round and round points.

    has been bought in August 2013 need to know if a value is fixed. all advice appreciated.

    It seems that the hard drive has failed and needs to be replaced. They are very cheap and easily replaceable. Laptop SATA hard detail can be used. Just be sure to get a quality at least equal the original in order to use recovery disks. It may be big, but not small ability more. For example if you have a 500 GB hard drive you can use a 750 GB hard drive, but not a 320 GB hard drive.

    Maintenance and Service Guide shows how to change the hard drive:

    http://h10025.www1.HP.com/ewfrf/wc/manualCategory?cc=us&DLC=en&lang=en&LC=en&product=5404757&

  • HP Photosmart C6280 all-in-One: Photosmart C6280 does not print after trying to clear the error library/startupitems

    I had a Library/Startupitems error since update my software HP a couple of years ago.  Trying to finally solve this problem myself, the HP site suggested to remove and reinstall the software.  There are no active link in the pages of HP support for a download.  I found a C6200 series pilot online, I have installed, but now I can't print anything but a test page, and I still have the error Library/Startupitems.  As it is, I can not even find this file to fix the error.

    Hi @Eric_V67

    I don't know exactly what causes this error, but I think it has something to do with permissions of drive Macs. Please, try the following steps and let me know the results of your efforts;

    Reset the printing system

    1. Click on the Apple icon ( ), then click on System Preferences.

  • Portege R830 - Windows does not start after I have install Comodo Firewall

    Good afternoon

    I bought today a Portege R830, and after the Windows configuration, the first program that I installed was the popular free Comodo Firewall. After that I restarted, Windows 7 unbootable. It would be stuck on the user login screen and I know it's a problem with the firewall because if I do a system restore to the restore point created by Setup of firewall, windows restarts.

    So I ask if there is any inconsistency between the firewall and software on the Toshiba. A that someone already had this problem? I tried to solve this problem throughout the day with no results. I even re-installed Windows 7 using the Toshiba Recovery and the problem persists. I really like the Comodo and I want this firewall on my laptop, but Windows does not just start!

    Any help would be apreciated.

    Hi jillefsky,.

    Have you disabled the Windows Firewall before you start with the installation of Comodo Firewall? As far as I know, Portege R830 is delivered with preinstalled McAfee security software and you must remove this program before you install other security tools.

    Generally this has nothing to do with Toshiba and it s advisable to contact Comodo directly. They may know about this so they can give you a proper answer.

    But I put t understand why this program is so important to you. Windows already has an internal firewall so that these programs are not necessary in my opinion. Just install a good antivirus like AntiVir and enable the automatic updates of Windows. All that s!

  • Cloud app creation does not open

    Windows 10. Cloud app creation does not open. Tried several times. Tried to uninstall, but the dialogue came telling me that several applications necessary so not able to uninstall.

    Tried to install on it. The app downloaded, he gave permission to install, and then nothing happened.

    Apps like Id and opened all right, but not the CC app all I can try?

    This can work...

    Sign out of your account... Uninstall... to run vacuuming...

    -http://helpx.adobe.com/creative-cloud/help/install-apps.html (and uninstall)

    -using the vacuuming after uninstalling and before reinstalling is often necessary

    -https://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html

    -Restart your computer... Sign in to your account... Reinstall

  • When I click on the 'new tab' + sign it flashes blue but the window does not open

    mouse on the new tab brings up the message 'open a new tab '.
    clicking on new tab causes the + sign flashing in blue but window does not open. If I loaded AVG PC tuneup?

    Please disable or uninstall the Ask toolbar extension for your problem.

  • When you try to go to Gmail, the tab does not open and said only: "loading."

    For the last three days, whenever I try to go to Gmail, tab Firefox says "loading" and does not open gmail. Gmail works fine on Internet Explorer on my laptop so I know that's not Gmail. No error, it just keeps trying to load for as long I let the open tab. Any ideas? I have not changed anything on my computer or settings for Firefox. Thank you!

    In addition to the foregoing, the first thing I would do is clear hide and delete cookies for the site, it can sometimes help to access a site that previously worked. For more information, see https://support.mozilla.com/kb/How+to+clear+the+cache and https://support.mozilla.com/kb/Deleting+cookies

  • Windows 8 app Store does not work

    All of a sudden when I try to open the app store Windows 8 instead of take me to the store the Soft green loading screen flashes to the top, and then it takes me to my Start menu.  I can my point on the left upper screen and see the app is there, but when I switch to it I'm get the green flash App loading screen and then right into my Start menu.

    I found similar questions on the forums but none of their fixes worked for me.

    It is a PC under Windows 8, not a tablet.

    Hi James,

    I understand that the app Store window does not work.

    1 are all the others start at screen apps work properly?
    2. did you of recent changes to the computer?

    I suggest you follow the steps mentioned below to solve the problem with Windows Store.

    Method 1: Please change the resolution and check if that helps.

    a. press Windows + x, click or tap command prompt (Administrator).
    b. navigate to the command prompt, type desk.cpl.
    c. Please change the resolution of the screen 1366 * 768.

    Method 2: Run the troubleshooter App of modern User Interface and check if it helps.



    Please see the following link for troubleshooting.

    What to do if you have problems with a soft:

    http://Windows.Microsoft.com/en-us/Windows-8/what-troubleshoot-problems-app

    Note: Please click on the link to the troubleshooting tool, download the file, save it and run the Troubleshooter:

    Method 3:

    I suggest you to reset the cache to store and check if you are able to open the store.

    To do:

    a. press the Windows key + R
    b. Type wsreset.exe and press to enter.

    If the problem persists, or if you have problems of Windows in the future, let us know and we would be happy to help you.

  • I just tried to install the Adobe Creative Cloud trail and the apps tab does not work and I tried to uninstall several times and nothing. Any suggestions?

    I just tried to install the Adobe Creative Cloud trail and the apps tab does not work and I tried to uninstall several times and nothing. Any suggestions?

    An error keeps poping up on creative cloud without work and it's really annoying that I can't use it anymore or even try anything at all.

    Help, please

    Using creative cloud | Download error in the applications tab of Creative Cloud Desktop Application

  • App-Manager does not connect to the Simulator OS Firefox on Windows 7

    OS: Windows 7

    Firefox: 28

    6.0pre8.20140112 Simulator 1.2 Firefox OS

    When I run the simulator it opens fine and I see a Firefox OS Desktop
    But the App Manager does not connect. The console at the bottom right says:

    .. localhost:56455 options (the port varies)

    .. connection timeout. Possible causes: has not clicked 'accept' (guest).

    .. .disconnecting

    .. .disconnected

    I have disabled my firewall, restarted firefox and even system - did not help
    There is a similar bug - but I don't know if we are talking about the same thing:
    https://support.Mozilla.org/en-us/questions/988385

    Thank you

    Well - I already knew these links and I can't find anything useful
    Anyway, I tried the Simulator instead of 1.2 1.3 (unstable)
    This one works very well

Maybe you are looking for

  • more iPhone 6s cannot check for update

    iPhone 6s more could not be updated because iphone disconnected

  • create global channels programmatically

    Hi all My question has to do with daqmx. I want to know if theres nothing to create the global channels or tasks programmatically without using the wizard of max or daqmx the usual procedure is to create global tasks or channels using the wizard of m

  • Using the C-series SCTL DIO module with slower than the top level [FPGA] clock

    Hey all,. I'm running online research on a problem that I have a lot of success. I have a chassis with integrated FPGA, top-level 9030 clock 40 MHz.  I have a NOR-9401 DIO C Series module plugged and the value that will be managed by the FPGA target.

  • ID:2481 of the event, the UPS Service is not configured correctly.

    I am running Win XP Pro, service Pact 3. I found this error in my event log. I do not have a UPS, so I wonder why should I get this error at all. I checked my settings of UPS and no UPS is displayed, all my options are set to NEVER, why I get a fatal

  • Been away chirping-sorry blackBerry smartphones

    Hello to all the storm users. I've been away from the forum for a little while. I'm happy to be back. Thanks to everyone who helped me during the attack on Twitter and Facebook. All is well now. The suggestion of Ubertwitter is the best for my storm.